When writing in a module filter into set_ftrace_filter for a module that is
not yet loaded, it it cached, and will be executed when the module is loaded
(although that is not implemented yet at this commit). Display the list of
cached modules to be traced.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

This is the start of the infrastructure work to allow for tracing module
functions before it is loaded.

Currently the following command:

  # echo :mod:some-mod > set_ftrace_filter

will enable tracing of all functions within the module "some-mod" if it is
loaded. What we want, is if the module is not loaded, that line will be
saved. When the module is loaded, then the "some-mod" will have that line
executed on it, so that the functions within it starts being traced.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Currently, when a function is not found in kallsyms, instead of simply
showing the function address, it shows nothing at all:

 # echo ':mod:kvm_intel' > /sys/kernel/tracing/set_ftrace_filter
 # echo function > /sys/kernel/tracing/set_ftrace_filter
 # qemu -enable-kvm /home/my-qemu-image
   <Ctrl-C>
 # rmmod kvm_intel
 # cat /sys/kernel/tracing/trace
 qemu-system-x86-2408  [001] d..2   135.013238:  <-kvm_arch_hardware_enable
 qemu-system-x86-2408  [001] ....   135.014574:  <-kvm_arch_vm_ioctl
 qemu-system-x86-2408  [001] ....   135.015420:  <-kvm_vm_ioctl_check_extension
 qemu-system-x86-2408  [001] ....   135.045411:  <-__do_cpuid_ent
 qemu-system-x86-2408  [001] ....   135.045412:  <-__do_cpuid_ent
 qemu-system-x86-2408  [001] ....   135.045412:  <-__do_cpuid_ent
 qemu-system-x86-2408  [001] ....   135.045412:  <-__do_cpuid_ent
 qemu-system-x86-2408  [001] ...1   135.045413:  <-__do_cpuid_ent
 qemu-system-x86-2408  [001] ....   135.045413:  <-__do_cpuid_ent

When it should show:

 qemu-system-x86-2408  [001] d..2   135.013238: 0xffffffffa02a39f0 <-kvm_arch_hardware_enable
 qemu-system-x86-2408  [001] ....   135.014574: 0xffffffffa02a2ba0 <-kvm_arch_vm_ioctl
 qemu-system-x86-2408  [001] ....   135.015420: 0xffffffffa029e4e0 <-kvm_vm_ioctl_check_extension
 qemu-system-x86-2408  [001] ....   135.045411: 0xffffffffa02a1380 <-__do_cpuid_ent
 qemu-system-x86-2408  [001] ....   135.045412: 0xffffffffa029e160 <-__do_cpuid_ent
 qemu-system-x86-2408  [001] ....   135.045412: 0xffffffffa029e180 <-__do_cpuid_ent
 qemu-system-x86-2408  [001] ....   135.045412: 0xffffffffa029e520 <-__do_cpuid_ent
 qemu-system-x86-2408  [001] ...1   135.045413: 0xffffffffa02a13b0 <-__do_cpuid_ent
 qemu-system-x86-2408  [001] ....   135.045413: 0xffffffffa02a1380 <-__do_cpuid_ent

instead.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The enum_map file is used to display a list of symbol
to name conversions. As its now used to resolve sizeof
lets update the name and description.

Link: http://lkml.kernel.org/r/20170531215653.3240-13-jeremy.linton@arm.comSigned-off-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The enum_replace stanza works as is for sizeof()
calls as well as enums. Rename it as well.

Link: http://lkml.kernel.org/r/20170531215653.3240-9-jeremy.linton@arm.comSigned-off-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Rename the core trace enum routines to use eval, to
reflect their use by more than just enum to value mapping.

Link: http://lkml.kernel.org/r/20170531215653.3240-8-jeremy.linton@arm.comSigned-off-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Rename the init and trace_enum_jmp_to_tail() routines
to reflect their use by more than enumerated types.

Link: http://lkml.kernel.org/r/20170531215653.3240-7-jeremy.linton@arm.comSigned-off-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

There is a lock protecting the trace_enum_map, rename
it to reflect the use by more than enums.

Link: http://lkml.kernel.org/r/20170531215653.3240-6-jeremy.linton@arm.comSigned-off-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The enum map entries can be exported to userspace
via a sys enum_map file. Rename those functions
and structures to reflect the fact that we are using
them for more than enums.

Link: http://lkml.kernel.org/r/20170531215653.3240-5-jeremy.linton@arm.comSigned-off-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Each module has a list of enum's its contributing to the
enum map, rename that entry to reflect its use by more than
enums.

Link: http://lkml.kernel.org/r/20170531215653.3240-4-jeremy.linton@arm.comSigned-off-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Each enum is loaded into the trace_enum_map, as we
are now using this for more than enums rename it.

Link: http://lkml.kernel.org/r/20170531215653.3240-3-jeremy.linton@arm.comSigned-off-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The kernel and its modules have sections containing the enum
string to value conversions. Rename this section because we
intend to store more than enums in it.

Link: http://lkml.kernel.org/r/20170531215653.3240-2-jeremy.linton@arm.comSigned-off-by: NJeremy Linton <jeremy.linton@arm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

trace_stop_cmdline_recording declaration isn't in use, remove it.

Link: http://lkml.kernel.org/r/20170609025327.9508-2-joelaf@google.com

Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NJoel Fernandes <joelaf@google.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

ftrace_hash is being kfree'ed in ftrace_graph_release(), however the
->buckets field is not.  This results in a memory leak that is easily
captured by kmemleak:

unreferenced object 0xffff880038afe000 (size 8192):
  comm "trace-cmd", pid 238, jiffies 4294916898 (age 9.736s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff815f561e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff8113964d>] __kmalloc+0x12d/0x1a0
    [<ffffffff810bf6d1>] alloc_ftrace_hash+0x51/0x80
    [<ffffffff810c0523>] __ftrace_graph_open.isra.39.constprop.46+0xa3/0x100
    [<ffffffff810c05e8>] ftrace_graph_open+0x68/0xa0
    [<ffffffff8114003d>] do_dentry_open.isra.1+0x1bd/0x2d0
    [<ffffffff81140df7>] vfs_open+0x47/0x60
    [<ffffffff81150f95>] path_openat+0x2a5/0x1020
    [<ffffffff81152d6a>] do_filp_open+0x8a/0xf0
    [<ffffffff811411df>] do_sys_open+0x12f/0x200
    [<ffffffff811412ce>] SyS_open+0x1e/0x20
    [<ffffffff815fa6e0>] entry_SYSCALL_64_fastpath+0x13/0x94
    [<ffffffffffffffff>] 0xffffffffffffffff

Link: http://lkml.kernel.org/r/20170525152038.7661-1-lhenriques@suse.com

Cc: stable@vger.kernel.org
Fixes: b9b0c831 ("ftrace: Convert graph filter to use hash tables")
Signed-off-by: NLuis Henriques <lhenriques@suse.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

sscanf is a very poor way to parse integer. For example, I input
"discard" for act_mask, it gets 0xd and completely messes up. Using
correct API to do integer parse.

This patch also makes attributes accept any base of integer.
Signed-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

As stack tracing now requires "rcu watching", force RCU to be watching when
recording a stack trace.

Link: http://lkml.kernel.org/r/20170512172449.879684501@goodmis.orgAcked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

No need to add ugly #ifdefs in the code. Having a standard stub file is much
prettier.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

If instance directories are deleted while there are registered function
triggers:

  # cd /sys/kernel/debug/tracing/instances
  # mkdir test
  # echo "schedule:enable_event:sched:sched_switch" > test/set_ftrace_filter
  # rmdir test
  Unable to handle kernel paging request for data at address 0x00000008
  Unable to handle kernel paging request for data at address 0x00000008
  Faulting instruction address: 0xc0000000021edde8
  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=2048
  NUMA
  pSeries
  Modules linked in: iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp tun bridge stp llc kvm iptable_filter fuse binfmt_misc pseries_rng rng_core vmx_crypto ib_iser rdma_cm iw_cm ib_cm ib_core libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c multipath virtio_net virtio_blk virtio_pci crc32c_vpmsum virtio_ring virtio
  CPU: 8 PID: 8694 Comm: rmdir Not tainted 4.11.0-nnr+ #113
  task: c0000000bab52800 task.stack: c0000000baba0000
  NIP: c0000000021edde8 LR: c0000000021f0590 CTR: c000000002119620
  REGS: c0000000baba3870 TRAP: 0300   Not tainted  (4.11.0-nnr+)
  MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE>
    CR: 22002422  XER: 20000000
  CFAR: 00007fffabb725a8 DAR: 0000000000000008 DSISR: 40000000 SOFTE: 0
  GPR00: c00000000220f750 c0000000baba3af0 c000000003157e00 0000000000000000
  GPR04: 0000000000000040 00000000000000eb 0000000000000040 0000000000000000
  GPR08: 0000000000000000 0000000000000113 0000000000000000 c00000000305db98
  GPR12: c000000002119620 c00000000fd42c00 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: 0000000000000000 0000000000000000 c0000000bab52e90 0000000000000000
  GPR24: 0000000000000000 00000000000000eb 0000000000000040 c0000000baba3bb0
  GPR28: c00000009cb06eb0 c0000000bab52800 c00000009cb06eb0 c0000000baba3bb0
  NIP [c0000000021edde8] ring_buffer_lock_reserve+0x8/0x4e0
  LR [c0000000021f0590] trace_event_buffer_lock_reserve+0xe0/0x1a0
  Call Trace:
  [c0000000baba3af0] [c0000000021f96c8] trace_event_buffer_commit+0x1b8/0x280 (unreliable)
  [c0000000baba3b60] [c00000000220f750] trace_event_buffer_reserve+0x80/0xd0
  [c0000000baba3b90] [c0000000021196b8] trace_event_raw_event_sched_switch+0x98/0x180
  [c0000000baba3c10] [c0000000029d9980] __schedule+0x6e0/0xab0
  [c0000000baba3ce0] [c000000002122230] do_task_dead+0x70/0xc0
  [c0000000baba3d10] [c0000000020ea9c8] do_exit+0x828/0xd00
  [c0000000baba3dd0] [c0000000020eaf70] do_group_exit+0x60/0x100
  [c0000000baba3e10] [c0000000020eb034] SyS_exit_group+0x24/0x30
  [c0000000baba3e30] [c00000000200bcec] system_call+0x38/0x54
  Instruction dump:
  60000000 60420000 7d244b78 7f63db78 4bffaa09 393efff8 793e0020 39200000
  4bfffecc 60420000 3c4c00f7 3842a020 <81230008> 2f890000 409e02f0 a14d0008
  ---[ end trace b917b8985d0e650b ]---
  Unable to handle kernel paging request for data at address 0x00000008
  Faulting instruction address: 0xc0000000021edde8
  Unable to handle kernel paging request for data at address 0x00000008
  Faulting instruction address: 0xc0000000021edde8
  Faulting instruction address: 0xc0000000021edde8

To address this, let's clear all registered function probes before
deleting the ftrace instance.

Link: http://lkml.kernel.org/r/c5f1ca624043690bd94642bb6bffd3f2fc504035.1494956770.git.naveen.n.rao@linux.vnet.ibm.comReported-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Handle a NULL glob properly and simplify the check.

Link: http://lkml.kernel.org/r/5df74d4ffb4721db6d5a22fa08ca031d62ead493.1494956770.git.naveen.n.rao@linux.vnet.ibm.comReviewed-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NNaveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Enabling the tracer selftest triggers occasionally the warning in
text_poke(), which warns when the to be modified page is not marked
reserved.

The reason is that the tracer selftest installs kprobes on functions marked
__init for testing. These probes are removed after the tests, but that
removal schedules the delayed kprobes_optimizer work, which will do the
actual text poke. If the work is executed after the init text is freed,
then the warning triggers. The bug can be reproduced reliably when the work
delay is increased.

Flush the optimizer work and wait for the optimizing/unoptimizing lists to
become empty before returning from the kprobes tracer selftest. That
ensures that all operations which were queued due to the probes removal
have completed.

Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.homeSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 6274de49 ("kprobes: Support delayed unoptimizing")
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

I hit the following lockdep splat when booting with ftrace selftests
enabled, as well as CONFIG_PREEMPT and LOCKDEP.

 Testing dynamic ftrace ops #1:
 (1 0 1 0 0)
 (1 1 2 0 0)
 (2 1 3 0 169)
 (2 2 4 0 50066)
 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 13 at kernel/rcu/srcutree.c:202 check_init_srcu_struct+0x60/0x70
 Modules linked in:
 CPU: 0 PID: 13 Comm: rcu_tasks_kthre Not tainted 4.12.0-rc1-test+ #587
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
 task: ffff880119628040 task.stack: ffffc900006a4000
 RIP: 0010:check_init_srcu_struct+0x60/0x70
 RSP: 0000:ffffc900006a7d98 EFLAGS: 00010246
 RAX: 0000000000000246 RBX: 0000000000000000 RCX: 0000000000000000
 RDX: ffff880119628040 RSI: 00000000ffffffff RDI: ffffffff81e5fb40
 RBP: ffffc900006a7e20 R08: 00000023b403c000 R09: 0000000000000001
 R10: ffffc900006a7e40 R11: 0000000000000000 R12: ffffffff81e5fb40
 R13: 0000000000000286 R14: ffff880119628040 R15: ffffc900006a7e98
 FS:  0000000000000000(0000) GS:ffff88011ea00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffff88011edff000 CR3: 0000000001e0f000 CR4: 00000000001406f0
 Call Trace:
  ? __synchronize_srcu+0x6e/0x140
  ? lock_acquire+0xdc/0x1d0
  ? ktime_get_mono_fast_ns+0x5d/0xb0
  synchronize_srcu+0x6f/0x110
  ? synchronize_srcu+0x6f/0x110
  rcu_tasks_kthread+0x20a/0x540
  kthread+0x114/0x150
  ? __rcu_read_unlock+0x70/0x70
  ? kthread_create_on_node+0x40/0x40
  ret_from_fork+0x2e/0x40
 Code: f6 83 70 06 00 00 03 49 89 c5 74 0d be 01 00 00 00 48 89 df e8 42 fa ff ff 4c 89 ee 4c 89 e7 e8 b7 42 75 00 5b 41 5c 41 5d 5d c3 <0f> ff eb aa 66 90 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
 ---[ end trace 5c3f4206ce50f6ac ]---

What happens is that the selftests include a creating of a dynamically
allocated ftrace_ops, which requires the use of synchronize_rcu_tasks()
which uses srcu, and triggers the above warning.

It appears that synchronize_rcu_tasks() is not set up at early_initcall(),
but it is at core_initcall(). By moving the tests down to that location
works out properly.

Link: http://lkml.kernel.org/r/20170517111435.7388c033@gandalf.local.homeAcked-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

This fixes the following clang warning:

kernel/trace/trace.c:3231:12: warning: address of array 'iter->started'
  will always evaluate to 'true' [-Wpointer-bool-conversion]
        if (iter->started)

Link: http://lkml.kernel.org/r/20170421234110.117075-1-mka@chromium.orgSigned-off-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

struct timespec is not y2038 safe on 32 bit machines and needs to be
replaced by struct timespec64 in order to represent times beyond year
2038 on such machines.

Fix all the timestamp representation in struct trace_hwlat and all the
corresponding implementations.

Link: http://lkml.kernel.org/r/1491613030-11599-3-git-send-email-deepa.kernel@gmail.comSigned-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Acked-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Dan Carpenter sent a patch to remove a check in ftrace_match_record()
because the logic of the code made the check redundant. I looked deeper into
the code, and made the following logic table, with the three variables and
the result of the original code.

modname        mod_matches     exclude_mod         result
-------        -----------     -----------         ------
  0                 0               0              return 0
  0                 0               1              func_match
  0                 1               *             < cannot exist >
  1                 0               0              return 0
  1                 0               1              func_match
  1                 1               0              func_match
  1                 1               1              return 0

Notice that when mod_matches == exclude mod, the result is always to
return 0, and when mod_matches != exclude_mod, then the result is to test
the function. This means we only need test if mod_matches is equal to
exclude_mod.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

We know that "mod_matches" is true here so there is no need to check
again.

Link: http://lkml.kernel.org/r/20170331152130.GA4947@mwandaSigned-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Strcpy is inherently not safe, and strlcpy() should be used instead.
__trace_find_cmdline() uses strcpy() because the comms saved must have a
terminating nul character, but it doesn't hurt to add the extra protection
of using strlcpy() instead of strcpy().

Link: http://lkml.kernel.org/r/1493806274-13936-1-git-send-email-amit.pundir@linaro.orgSigned-off-by: NAmey Telawane <ameyt@codeaurora.org>
[AmitP: Cherry-picked this commit from CodeAurora kernel/msm-3.10
https://source.codeaurora.org/quic/la/kernel/msm-3.10/commit/?id=2161ae9a70b12cf18ac8e5952a20161ffbccb477]
Signed-off-by: NAmit Pundir <amit.pundir@linaro.org>
[ Updated change log and removed the "- 1" from len parameter ]
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

When reading the ring buffer for consuming, it is optimized for splice,
where a page is taken out of the ring buffer (zero copy) and sent to the
reading consumer. When the read is finished with the page, it calls
ring_buffer_free_read_page(), which simply frees the page. The next time the
reader needs to get a page from the ring buffer, it must call
ring_buffer_alloc_read_page() which allocates and initializes a reader page
for the ring buffer to be swapped into the ring buffer for a new filled page
for the reader.

The problem is that there's no reason to actually free the page when it is
passed back to the ring buffer. It can hold it off and reuse it for the next
iteration. This completely removes the interaction with the page_alloc
mechanism.

Using the trace-cmd utility to record all events (causing trace-cmd to
require reading lots of pages from the ring buffer, and calling
ring_buffer_alloc/free_read_page() several times), and also assigning a
stack trace trigger to the mm_page_alloc event, we can see how many times
the ring_buffer_alloc_read_page() needed to allocate a page for the ring
buffer.

Before this change:

  # trace-cmd record -e all -e mem_page_alloc -R stacktrace sleep 1
  # trace-cmd report |grep ring_buffer_alloc_read_page | wc -l
  9968

After this change:

  # trace-cmd record -e all -e mem_page_alloc -R stacktrace sleep 1
  # trace-cmd report |grep ring_buffer_alloc_read_page | wc -l
  4
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Have the stacktrace function trigger probe trigger stack traces within the
instance that they were added to in the set_ftrace_filter.

 ># cd /sys/kernel/debug/tracing
 ># mkdir instances/foo
 ># cd instances/foo
 ># echo schedule:stacktrace:1 > set_ftrace_filter
 ># cat trace
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 1/1   #P:4
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
           <idle>-0     [001] .N.2   202.585010: <stack trace>
  =>
  => schedule
  => schedule_preempt_disabled
  => do_idle
  => cpu_startup_entry
  => start_secondary
  => verify_cpu
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Have the traceon/off function probe triggers affect only the instance they
are set in. This required making the trace_on/off accessible for other files
in the tracing directory.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Modify the snapshot probe trigger to work with instances. This way the
snapshot function trigger will only affect the instance that it is added to
in the set_ftrace_filter file.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Pass around the local trace_array that is the descriptor for tracing
instances, when enabling and disabling probes. This by default sets the
enable/disable of event probe triggers to work with instances.

The other probes will need some more work to get them working with
instances.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

With the redesign of the registration and execution of the function probes
(triggers), data can now be passed from the setup of the probe to the probe
callers that are specific to the trace_array it is on. Although, all probes
still only affect the toplevel trace array, this change will allow for
instances to have their own probes separated from other instances and the
top array.

That is, something like the stacktrace probe can be set to trace only in an
instance and not the toplevel trace array. This isn't implement yet, but
this change sets the ground work for the change.

When a probe callback is triggered (someone writes the probe format into
set_ftrace_filter), it calls register_ftrace_function_probe() passing in
init_data that will be used to initialize the probe. Then for every matching
function, register_ftrace_function_probe() will call the probe_ops->init()
function with the init data that was passed to it, as well as an address to
a place holder that is associated with the probe and the instance. The first
occurrence will have a NULL in the pointer. The init() function will then
initialize it. If other probes are added, or more functions are part of the
probe, the place holder will be passed to the init() function with the place
holder data that it was initialized to the last time.

Then this place_holder is passed to each of the other probe_ops functions,
where it can be used in the function callback. When the probe_ops free()
function is called, it can be called either with the rip of the function
that is being removed from the probe, or zero, indicating that there are no
more functions attached to the probe, and the place holder is about to be
freed. This gives the probe_ops a way to free the data it assigned to the
place holder if it was allocade during the first init call.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

In order to eventually have each trace_array instance have its own unique
set of function probes (triggers), the trace array needs to hold the ops and
the filters for the probes.

This is the first step to accomplish this. Instead of having the private
data of the probe ops point to the trace_array, create a separate list that
the trace_array holds. There's only one private_data for a probe, we need
one per trace_array. The probe ftrace_ops will be dynamically created for
each instance, instead of being static.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Pass the trace_array associated to a ftrace_probe_ops into the probe_ops
func(), init() and free() functions. The trace_array is the descriptor that
describes a tracing instance. This will help create the infrastructure that
will allow having function probes unique to tracing instances.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Add a link list to the trace_array to hold func probes that are registered.
Currently, all function probes are the same for all instances as it was
before, that is, only the top level trace_array holds the function probes.
But this lays the ground work to have function probes be attached to
individual instances, and having the event trigger only affect events in the
given instance. But that work is still to be done.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

If the ftrace_hash_move_and_update_ops() fails, and an ops->free() function
exists, then it needs to be called on all the ops that were added by this
registration.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Now that the function probes have their own ftrace_ops, there's no reason to
continue using the ftrace_func_hash to find which probe to call in the
function callback. The ops that is passed in to the function callback is
part of the probe_ops to call.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Have the function probes have their own ftrace_ops, and remove the
trace_probe_ops. This simplifies some of the ftrace infrastructure code.

Individual entries for each function is still allocated for the use of the
output for set_ftrace_filter, but they will be removed soon too.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Currently unregister_ftrace_function_probe_func() is a void function. It
does not give any feedback if an error occurred or no item was found to
remove and nothing was done.

Change it to return status and success if it removed something. Also update
the callers to return that feedback to the user.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The processes of updating a ops filter_hash is a bit complex, and requires
setting up an old hash to perform the update. This is done exactly the same
in two locations for the same reasons. Create a helper function that does it
in one place.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>