- 24 3月, 2009 33 次提交
-
-
由 Zebediah C. McClure 提交于
IRQ related changes. Signed-off-by: NZebediah C. McClure <zmc@lurian.net> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Zebediah C. McClure 提交于
Changes to memory subsystem. Signed-off-by: NZebediah C. McClure <zmc@lurian.net> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Zebediah C. McClure 提交于
Changes to base IO subsystem. Signed-off-by: NZebediah C. McClure <zmc@lurian.net> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Zebediah C. McClure 提交于
Add base support for omap850 cpu. Signed-off-by: NZebediah C. McClure <zmc@lurian.net> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Also remove board-omap3beagle.h that is not included anywhere, and move protoype for voiceblue_reset() from board-voiceblue.h to system.h. After this patch there are still board-ams-delta.h, board-sx1.h and board-voiceblue.h that export some functions. These could be removed if the functions were moved under drivers. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Move the defines to the associated board file and remove the now unnecessary header file. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Move the defines to the associated board file and remove the now unnecessary header file. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Move the defines to the associated board file and remove the now unnecessary header file. Also rename OMAP34XX_ETHR_START to LDP_ETHR_START. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Move the defines to the associated board file and remove the now unnecessary header file. Also rename OMAP24XX_ETHR_GPIO_IRQ to H4_ETHR_GPIO_IRQ. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Move the defines to the associated board file and remove the now unnecessary header file. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Move the defines to the associated board file and remove the now unnecessary header file. Also rename SDP2430_ETHR_GPIO_IRQ to SDP2430_ETHR_GPIO_IRQ. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Move the defines to the associated board file and remove the now unnecessary header files. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Move the defines to the board file and remove the now unnecessary header file. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Move the defines to the board file and remove the now unnecessary header file. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Also move board-h3.h to mach-omap1. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Also move board-h2.h to mach-omap1. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Move defines to the board file and remove the now unnecessary headers. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Hiroshi DOYU 提交于
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Hiroshi DOYU 提交于
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Hiroshi DOYU 提交于
no need to keep mailbox.h separately. Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Hiroshi DOYU 提交于
To preserve the registers during off-mode Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Hiroshi DOYU 提交于
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Hiroshi DOYU 提交于
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Hiroshi DOYU 提交于
Since "mbox->dev" doesn't exist and isn't created either at registration, this patch will create "struct device", which belongs to "omap-mailbox" class and set this pointer for the member of "struct omap_mbox". Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Hiroshi DOYU 提交于
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Hiroshi DOYU 提交于
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Hiroshi DOYU 提交于
Signed-off-by: NHiroshi DOYU <Hiroshi.DOYU@nokia.com>
-
由 Linus Torvalds 提交于
-
由 Kyle McMartin 提交于
With a sufficiently new compiler and binutils, code which wasn't previously generating .eh_frame sections has begun to. Certain architectures (powerpc, in this case) may generate unexpected relocation formats in response to this, preventing modules from loading. While the new relocation types should probably be handled, revert to the previous behaviour with regards to generation of .eh_frame sections. (This was reported against Fedora, which appears to be the only distro doing any building against gcc-4.4 at present: RH bz#486545.) Signed-off-by: NKyle McMartin <kyle@redhat.com> Acked-by: NRoland McGrath <roland@redhat.com> Cc: Alexandre Oliva <aoliva@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jody McIntyre 提交于
Revert the change to the orphan dates of Windows 95, DOS, compression. Add a new orphan date for OS/2. Signed-off-by: NJody McIntyre <scjody@sun.com> Acked-by: NPavel Machek <pavel@ucw.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) ucc_geth: Fix oops when using fixed-link support dm9000: locking bugfix net: update dnet.c for bus_id removal dnet: DNET should depend on HAS_IOMEM dca: add missing copyright/license headers nl80211: Check that function pointer != NULL before using it sungem: missing net_device_ops be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle be2net: replenish when posting to rx-queue is starved in out of mem conditions bas_gigaset: correctly allocate USB interrupt transfer buffer smsc911x: reset last known duplex and carrier on open sh_eth: Fix mistake of the address of SH7763 sh_eth: Change handling of IRQ netns: oops in ip[6]_frag_reasm incrementing stats net: kfree(napi->skb) => kfree_skb net: fix sctp breakage ipv6: fix display of local and remote sit endpoints net: Document /proc/sys/net/core/netdev_budget tulip: fix crash on iface up with shirq debug virtio_net: Make virtio_net support carrier detection ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix crash with /proc/iomem sparc64: Reschedule KGDB capture to a software interrupt. sbus: Auto-load openprom module when device opened.
-
由 Miklos Szeredi 提交于
This patch fixes bug #12208: Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=12208 Subject : uml is very slow on 2.6.28 host This turned out to be not a scheduler regression, but an already existing problem in ptrace being triggered by subtle scheduler changes. The problem is this: - task A is ptracing task B - task B stops on a trace event - task A is woken up and preempts task B - task A calls ptrace on task B, which does ptrace_check_attach() - this calls wait_task_inactive(), which sees that task B is still on the runq - task A goes to sleep for a jiffy - ... Since UML does lots of the above sequences, those jiffies quickly add up to make it slow as hell. This patch solves this by not rescheduling in read_unlock() after ptrace_stop() has woken up the tracer. Thanks to Oleg Nesterov and Ingo Molnar for the feedback. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> CC: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 3月, 2009 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc: powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machines
-
由 Kumar Gala 提交于
Grant picked up the wrong version of "Respect _PAGE_COHERENT on classic ppc32 SW" (commit a4bd6a93) It was missing the code to actually deal with the fixup of _PAGE_COHERENT based on the CPU feature. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
commit b1c4a9dd ("ucc_geth: Change uec phy id to the same format as gianfar's") introduced a regression in the ucc_geth driver that causes this oops when fixed-link is used: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0151270 Oops: Kernel access of bad area, sig: 11 [#1] TMCUTU NIP: c0151270 LR: c0151270 CTR: c0017760 REGS: cf81fa60 TRAP: 0300 Not tainted (2.6.29-rc8) MSR: 00009032 <EE,ME,IR,DR> CR: 24024042 XER: 20000000 DAR: 00000000, DSISR: 20000000 TASK = cf81cba0[1] 'swapper' THREAD: cf81e000 GPR00: c0151270 cf81fb10 cf81cba0 00000000 c0272e20 c025f354 00001e80 cf86b08c GPR08: d1068200 cffffb74 06000000 d106c200 42024042 10085148 0fffd000 0ffc81a0 GPR16: 00000001 00000001 00000000 007ffeb0 00000000 0000c000 cf83f36c cf83f000 GPR24: 00000030 cf83f360 cf81fb20 00000000 d106c200 20000000 00001e80 cf83f360 NIP [c0151270] ucc_geth_open+0x330/0x1efc LR [c0151270] ucc_geth_open+0x330/0x1efc Call Trace: [cf81fb10] [c0151270] ucc_geth_open+0x330/0x1efc (unreliable) [cf81fba0] [c0187638] dev_open+0xbc/0x12c [cf81fbc0] [c0187e38] dev_change_flags+0x8c/0x1b0 This patch fixes the issue by removing offending (and somewhat duplicate) code from init_phy() routine, and changes _probe() function to use uec_mdio_bus_name(). Also, since we fully construct phy_bus_id in the _probe() routine, we no longer need ->phy_address and ->mdio_bus fields in ucc_geth_info structure. I wish the patch would be a bit shorter, but it seems like the only way to fix the issue in a sane way. Luckily, the patch has been tested with real PHYs and fixed-link, so no further regressions expected. Reported-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Tested-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Brownell 提交于
This fixes a locking bug in the dm9000 driver. It calls request_irq() without setting IRQF_DISABLED ... which is correct for handlers that support IRQ sharing, since that behavior is not guaranteed for shared IRQs. However, its IRQ handler then wrongly assumes that IRQs are blocked. So the fix just uses the right spinlock primitives in the IRQ handler. NOTE: this is a classic example of the type of bug which lockdep currently masks by forcibly setting IRQF_DISABLED on IRQ handlers that did not request that flag. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kconfig: improve seed in randconfig kconfig: fix randconfig for choice blocks
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
* 'fix-includes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: merge the non-MMU and MMU versions of siginfo.h m68k: use the MMU version of unistd.h for all m68k platforms m68k: merge the non-MMU and MMU versions of signal.h m68k: merge the non-MMU and MMU versions of ptrace.h m68k: use MMU version of setup.h for both MMU and non-MMU m68k: merge the non-MMU and MMU versions of sigcontext.h m68k: merge the non-MMU and MMU versions of swab.h m68k: merge the non-MMU and MMU versions of param.h
-