- 01 2月, 2013 1 次提交
-
-
由 Tom Parkin 提交于
The datagram_*_ctl functions in net/ipv6/datagram.c are IPv6-specific. Since datagram_send_ctl is publicly exported it should be appropriately named to reflect the fact that it's for IPv6 only. Signed-off-by: NTom Parkin <tparkin@katalix.com> Signed-off-by: NJames Chapman <jchapman@katalix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 12月, 2012 2 次提交
-
-
由 J. Bruce Fields 提交于
It may be a matter of personal taste, but I find this makes the code clearer. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 04 12月, 2012 5 次提交
-
-
由 J. Bruce Fields 提交于
Over TCP, RPC's are preceded by a single 4-byte field telling you how long the rpc is (in bytes). The spec also allows you to send an RPC in multiple such records (the high bit of the length field is used to tell you whether this is the final record). We've survived for years without supporting this because in practice the clients we care about don't use it. But the userland rpc libraries do, and every now and then an experimental client will run into this. (Most recently I noticed it while trying to write a pynfs check.) And we're really on the wrong side of the spec here--let's fix this. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Keep a separate field, sk_datalen, that tracks only the data contained in a fragment, not including the fragment header. For now, this is always just max(0, sk_tcplen - 4), but after we allow multiple fragments sk_datalen will accumulate the total rpc data size while sk_tcplen only tracks progress receiving the current fragment. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
The full reclen doesn't include the fragment header, but sk_tcplen does. Fix this to make it an apples-to-apples comparison. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Soon we want to support multiple fragments, in which case it may be legal for a single fragment to be smaller than 8 bytes, so we'll want to delay this check till we've reached the last fragment. Also fix an outdated comment. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Byte-swapping in place is always a little dubious. Let's instead define this field to always be big-endian, and do the swapping on demand where we need it. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 05 11月, 2012 1 次提交
-
-
由 Weston Andros Adamson 提交于
Replace multiple BUG_ON() calls with WARN_ON_ONCE() and early return when sanity checking socket ownership (lock). The bind call will fail if the socket was unsuccessfully reclassified. Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 10 9月, 2012 1 次提交
-
-
由 J. Bruce Fields 提交于
You can use nfsd/portlist to give nfsd additional sockets to listen on. In theory you can also remove listening sockets this way. But nobody's ever done that as far as I can tell. Also this was partially broken in 2.6.25, by a217813f "knfsd: Support adding transports by writing portlist file". (Note that we decide whether to take the "delfd" case by checking for a digit--but what's actually expected in that case is something made by svc_one_sock_name(), which won't begin with a digit.) So, let's just rip out this stuff. Acked-by: NNeilBrown <neilb@suse.de> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 22 8月, 2012 6 次提交
-
-
由 J. Bruce Fields 提交于
The only errors returned from xpo_recvfrom have been -EAGAIN and -EAFNOSUPPORT. The latter was removed by a previous patch. That leaves only -EAGAIN, which is treated just like 0 by the caller (svc_recv). So, just ditch -EAGAIN and return 0 instead. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
None of the callers should see an unsupported address family (only one of them even bothers to check for that case), so just check for the buggy case in svc_addr_len and don't bother elsewhere. Acked-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Order the code in a more boring way. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
There's some duplicate code here. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Mainly, use the kernel standard err = -ERROR; if (something_bad) goto out; normal case; rather than if (something_bad) err = -ERROR else { normal case; } Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Use the kernel-standard ptr-or-error return convention instead of passing a pointer to the error. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 21 8月, 2012 1 次提交
-
-
由 J. Bruce Fields 提交于
Examination of svc_tcp_clear_pages shows that it assumes sk_tcplen is consistent with sk_pages[] (in particular, sk_pages[n] can't be NULL if sk_tcplen would lead us to expect n pages of data). svc_tcp_restore_pages zeroes out sk_pages[] while leaving sk_tcplen. This is OK, since both functions are serialized by XPT_BUSY. However, that means the inconsistency must be repaired before dropping XPT_BUSY. Therefore we should be ensuring that svc_tcp_save_pages repairs the problem before exiting svc_tcp_recv_record on error. Symptoms were a BUG() in svc_tcp_clear_pages. Cc: stable@vger.kernel.org Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 28 6月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
dropwatch wrongly diagnose all received UDP packets as drops. This patch removes trace_kfree_skb() done in skb_free_datagram_locked(). Locations calling skb_free_datagram_locked() should do it on their own. As a result, drops are accounted on the right function. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 5月, 2012 1 次提交
-
-
由 Joe Perches 提交于
Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 4月, 2012 1 次提交
-
-
由 Pavel Emelyanov 提交于
Name them in a "backward compatible" manner, i.e. reuse or not are still 1 and 0 respectively. The reuse value of 2 means that the socket with it will forcibly reuse everyone else's port. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 3月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
net/sunrpc/svcsock.c:412:22: warning: incorrect type in assignment (different address spaces) - svc_partial_recvfrom now takes a struct kvec, so the variable save_iovbase needs to be an ordinary (void *) Make a bunch of variables in net/sunrpc/xprtsock.c static Fix a couple of "warning: symbol 'foo' was not declared. Should it be static?" reports. Fix a couple of conflicting function declarations. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 04 2月, 2012 1 次提交
-
-
由 Stanislav Kinsbursky 提交于
This is a cleanup patch. Service temporary sockets can be TCP or RDMA only. But XPT_CHNGBUF service socket flag is checked only for UDP sockets on receive. Thus (if I don't miss something non-obvious) this bit raising for temporary sockets can be removed. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 01 2月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
Fixes this build error when CONFIG_NET_NS is not set: net/sunrpc/svcsock.c: In function 'svc_setup_socket': net/sunrpc/svcsock.c:1412:40: error: 'struct sock_common' has no member named 'skc_net' Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Stanislav Kinsbursky 提交于
Lockd and NFSd services will handle requests from and to many network nsamespaces. And thus have to be registered and unregistered per network namespace. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 07 12月, 2011 1 次提交
-
-
由 Stanislav Kinsbursky 提交于
This patch makes svc_xprt inherit network namespace link from its socket. Signed-off-by: NStanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 23 11月, 2011 1 次提交
-
-
由 Alexey Dobriyan 提交于
C assignment can handle struct in6_addr copying. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2011 1 次提交
-
-
由 Paul Gortmaker 提交于
With calls to modular infrastructure, these files really needs the full module.h header. Call it out so some of the cleanups of implicit and unrequired includes elsewhere can be cleaned up. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 14 9月, 2011 1 次提交
-
-
由 Mi Jinlong 提交于
For IPv6 local address, lockd can not callback to client for missing scope id when binding address at inet6_bind: 324 if (addr_type & IPV6_ADDR_LINKLOCAL) { 325 if (addr_len >= sizeof(struct sockaddr_in6) && 326 addr->sin6_scope_id) { 327 /* Override any existing binding, if another one 328 * is supplied by user. 329 */ 330 sk->sk_bound_dev_if = addr->sin6_scope_id; 331 } 332 333 /* Binding to link-local address requires an interface */ 334 if (!sk->sk_bound_dev_if) { 335 err = -EINVAL; 336 goto out_unlock; 337 } Replacing svc_addr_u by sockaddr_storage, let rqstp->rq_daddr contains more info besides address. Reviewed-by: NJeff Layton <jlayton@redhat.com> Reviewed-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NMi Jinlong <mijinlong@cn.fujitsu.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 16 7月, 2011 1 次提交
-
-
由 H Hartley Sweeten 提交于
Include the private header sunrpc.h to pickup the declaration of the function svc_send_common to quiet the following sparse noise: warning: symbol 'svc_send_common' was not declared. Should it be static? Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 15 7月, 2011 1 次提交
-
-
由 Trond Myklebust 提交于
Change explicit references to CONFIG_NFS_V4_1 to implicit ones Get rid of the unnecessary defines in backchannel_rqst.c and bc_svc.c: the Makefile takes care of those dependency. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 10 4月, 2011 1 次提交
-
-
由 J. Bruce Fields 提交于
Currently when there's some failure to receive a callback (because we couldn't find a matching xid, for example), we exit svc_recv with sk_tcplen still set but without any pages saved with the socket. This will cause a crash later in svc_tcp_restore_pages. Instead, make sure we reset that tcp information whether the callback received failed or succeeded. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 08 4月, 2011 7 次提交
-
-
由 Olga Kornievskaia 提交于
Allow the NFSv4 server to make use of TCP autotuning behaviour, which was previously disabled by setting the sk_userlocks variable. Set the receive buffers to be big enough to receive the whole RPC request, and set this for the listening socket, not the accept socket. Remove the code that readjusts the receive/send buffer sizes for the accepted socket. Previously this code was used to influence the TCP window management behaviour, which is no longer needed when autotuning is enabled. This can improve IO bandwidth on networks with high bandwidth-delay products, where a large tcp window is required. It also simplifies performance tuning, since getting adequate tcp buffers previously required increasing the number of nfsd threads. Signed-off-by: NOlga Kornievskaia <aglo@citi.umich.edu> Cc: Jim Rees <rees@umich.edu> Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
-
由 J. Bruce Fields 提交于
Ensure that we immediately read and buffer data from the incoming TCP stream so that we grow the receive window quickly, and don't deadlock on large READ or WRITE requests. Also do some minor exit cleanup. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Trond Myklebust 提交于
It's much simpler just to copy the cb reply data than to play tricks with pages. Callback replies will typically be very small (at least until we implement cb_getattr, in which case files with very long ACLs could pose a problem), so there's no loss in efficiency. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
If the client sents a record too short to contain even the beginning of the rpc header, then just close the connection. The current code drops the record data and continues. I don't see the point. It's a hopeless situation and simpler just to cut off the connection completely. Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 J. Bruce Fields 提交于
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Trond Myklebust 提交于
Minor cleanup in preparation for later patches. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
由 Trond Myklebust 提交于
Don't requeue the socket in some cases where we know it's unnecessary. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
-
- 23 2月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Add proper RCU annotations/verbs to sk_wq and wq members Fix __sctp_write_space() sk_sleep() abuse (and sock->wq access) Fix sunrpc sk_sleep() abuse too Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 1月, 2011 1 次提交
-
-
由 Andy Adamson 提交于
The information required to find the nfs_client cooresponding to the incoming back channel request is contained in the NFS layer. Perform minimal checking in the RPC layer pg_authenticate method, and push more detailed checking into the NFS layer where the nfs_client can be found. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-