- 17 9月, 2015 5 次提交
-
-
由 Hendrik Brueckner 提交于
Previously, the cpum_cf PMU returned -EPERM if a counter is requested and the counter set to which the counter belongs is not authorized. According to the perf_event_open() system call manual, an error code of EPERM indicates an unsupported exclude setting or CAP_SYS_ADMIN is missing. Use ENOENT to indicate that particular counters are not available when the counter set which contains the counter is not authorized. For generic events, this might trigger a fall back, for example, to a software event. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The uc_sigmask in the ucontext structure is an array of words to keep the 64 signal bits (or 1024 if you ask glibc but the kernel sigset_t only has 64 bits). For 64 bit the sigset_t contains a single 8 byte word, but for 31 bit there are two 4 byte words. The compat signal handler code uses a simple copy of the 64 bit sigset_t to the 31 bit compat_sigset_t. As s390 is a big-endian architecture this is incorrect, the two words in the 31 bit sigset_t array need to be swapped. Cc: <stable@vger.kernel.org> Reported-by: NStefan Liebler <stli@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
The critical section cleanup code misses to add the offset of the thread_struct to the task address. Therefore, if the critical section code gets executed, it may corrupt the task struct or restore the contents of the floating point registers from the wrong memory location. Fixes d0164ee2 "s390/kernel: remove save_fpu_regs() parameter and use __LC_CURRENT instead". Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The swsusp_arch_suspend()/swsusp_arch_resume() functions currently only save and restore the floating point registers. If the task that started the hibernation process is using vector registers they can get lost. To fix this just call save_fpu_regs in swsusp_arch_suspend(), the restore will happen automatically on return to user space. Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull rdma driver move from Doug Ledford: "This is a move only, no functional changes. I tried to get it in prior to the rc1 release, but we were waiting on IBM to get back to us that they were OK with the deprecation and eventual removal of this driver. That OK didn't materialize until last week, so integration and testing time pushed us beyond the rc1 release. Summary: - Move ehca driver to staging/rdma and schedule for deletion" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/ehca: Deprecate driver, move to staging, schedule deletion
-
- 16 9月, 2015 6 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Two patches for the nct6775 driver: add support for NCT6793D, and fix swapped registers" * tag 'hwmon-for-linus-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct6775) Add support for NCT6793D hwmon: (nct6775) Swap STEP_UP_TIME and STEP_DOWN_TIME registers for most chips
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control fixes from Linus Walleij: "This is a first set of pin control fixes for the v4.3 series. Nothing special to say, business as usual. - Some IS_ERR() fixes from Julia Lawall. I always wanted the compiler to catch these but error pointers by nailing them as an err pointer intrinsic type or something seem to be a "no can do". In any case, cocinelle is obviously up to the task, better than bugs staying around. - Better error handling for NULL GPIO chips. - Fix a compile error from the big irq desc refactoring. I'm surprised the fallout wasn't bigger than this" * tag 'pinctrl-v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: samsung: s3c24xx: fix syntax error pinctrl: core: Warn about NULL gpio_chip in pinctrl_ready_for_gpio_range() pinctrl: join lines that can be a single line within 80 columns pinctrl: digicolor: convert null test to IS_ERR test pinctrl: qcom: ssbi: convert null test to IS_ERR test
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull GPIO fixes from Linus Walleij: "This is the first round of GPIO fixes for v4.3. Quite a lot of patches, but the influx of new stuff in the merge window was equally big, so I'm not surprised. - Return value checks and thus nicer errorpath for two drivers. - Make GPIO_RCAR arch neutral. - Propagate errors from GPIO chip ->get() vtable call. It turned out these can actually fail sometimes, especially on slowpath controllers doing I2C traffic and similar. - Update documentation to be in sync with the massive changes in the v4.3 merge window, phew. - Handle deferred probe properly in the OMAP driver. - Get rid of surplus MODULE_ALIAS() from sx150x" * tag 'gpio-v4.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: omap: Fix GPIO numbering for deferred probe Documentation: gpio: Explain that <function>-gpio is also supported gpio: omap: Fix gpiochip_add() handling for deferred probe gpio: sx150x: Remove unnecessary MODULE_ALIAS() Documentation: gpio: board: describe the con_id parameter Documentation: gpio: board: add flags parameter to gpiod_get*() functions gpio: Propagate errors from chip->get() gpio: rcar: GPIO_RCAR doesn't relate to ARM gpio: mxs: need to check return value of irq_alloc_generic_chip gpio: mxc: need to check return value of irq_alloc_generic_chip
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: "This fixes the following issues: - The selftest overreads the IV test vector. - Fix potential infinite loop in sunxi-ss driver. - Fix powerpc build failure when VMX is set without VSX" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: testmgr - don't copy from source IV too much crypto: sunxi-ss - Fix a possible driver hang with ciphers crypto: vmx - VMX crypto should depend on CONFIG_VSX
-
由 Luck, Tony 提交于
Signed-off-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Woodhouse 提交于
The GPL does not permit us to link against the OpenSSL library. Use LGPL for sign-file and extract-file instead. [ The whole "openssl isn't compatible with gpl" is really just fear-mongering, but there's no reason not to make modsign LGPL, so nobody cares. - Linus ] Reported-by: NJulian Andres Klode <jak@jak-linux.org> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJulian Andres Klode <jak@jak-linux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 9月, 2015 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clk fixes from Stephen Boyd: "A couple build fixes for drivers introduced in the merge window and a handful of patches to add more critical clocks on rockchip SoCs that are affected by newly introduced gpio clock handling" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: rockchip: Add pclk_peri to critical clocks on RK3066/RK3188 clk: rockchip: add pclk_cpu to the list of rk3188 critical clocks clk: rockchip: handle critical clocks after registering all clocks clk: Hi6220: separately build stub clock driver clk: h8s2678: Fix compile error
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fixes from Steve French: "Two small cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] mount option sec=none not displayed properly in /proc/mounts CIFS: fix type confusion in copy offload ioctl
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "A number of fixes for the merge window, fixing a number of cases missed when testing the uaccess code, particularly cases which only show up with certain compiler versions" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8431/1: fix alignement of __bug_table section entries arm/xen: Enable user access to the kernel before issuing a privcmd call ARM: domains: add memory dependencies to get_domain/set_domain ARM: domains: thread_info.h no longer needs asm/domains.h ARM: uaccess: fix undefined instruction on ARMv7M/noMMU ARM: uaccess: remove unneeded uaccess_save_and_disable macro ARM: swpan: fix nwfpe for uaccess changes ARM: 8429/1: disable GCC SRA optimization
-
- 14 9月, 2015 15 次提交
-
-
由 Linus Walleij 提交于
?SYNTAX ERROR irq_desc_get_irq_chip() does not exist. It should be irq_desc_get_chip(). Tested by compiling s3c2410_defconfig. Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Tony Lindgren 提交于
If the gpio driver is confused about the numbers for gpio-ranges, pinctrl_ready_for_gpio_range() may get called with invalid GPIO causing a NULL pointer exception. Let's instead provide a warning that allows fixing the problem and return with error. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Masahiro Yamada 提交于
There is no reason to break a line shorter than 80 columns. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Julia Lawall 提交于
Since commit 323de9ef ("pinctrl: make pinctrl_register() return proper error code"), pinctrl_register returns an error code rather than NULL on failure. Update a driver that was introduced more recently. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1,e2; @@ e = pinctrl_register(...) ... when != e = e1 if ( - e == NULL + IS_ERR(e) ) { ... return - e2 + PTR_ERR(e) ; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NBaruch Siach <baruch@tkos.co.il> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Julia Lawall 提交于
Since commit 323de9ef ("pinctrl: make pinctrl_register() return proper error code"), pinctrl_register returns an error code rather than NULL on failure. Update some drivers that were introduced more recently. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1,e2; @@ e = pinctrl_register(...) ... when != e = e1 if ( - e == NULL + IS_ERR(e) ) { ... return - e2 + PTR_ERR(e) ; } // </smpl> Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Tony Lindgren 提交于
If gpio-omap probe fails with -EPROBE_DEFER, the GPIO numbering keeps increasing. Only increase the gpio count if gpiochip_add() was successful as otherwise the numbers will increase for each probe attempt. Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: NGrygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Javier Martinez Canillas 提交于
The GPIO documentation mentions that GPIOs are mapped by defining a <function>-gpios property in the consumer device's node but a -gpio sufix is also supported after commit: dd34c37a ("gpio: of: Allow -gpio suffix for property names") Update the documentation to match the implementation. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Tony Lindgren 提交于
Currently we gpio-omap breaks if gpiochip_add() returns -EPROBE_DEFER: [ 0.570000] gpiochip_add: GPIOs 0..31 (gpio) failed to register [ 0.570000] omap_gpio 48310000.gpio: Could not register gpio chip -517 ... [ 3.670000] omap_gpio 48310000.gpio: Unbalanced pm_runtime_enable! Let's fix the issue by adding the missing pm_runtime_put() on error. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: NSantosh Shilimkar <ssantosh@kernel.org> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Javier Martinez Canillas 提交于
The driver has a I2C device id table that is used to create the module aliases and also "sx150x" isn't a supported I2C id, so it's never used. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Dirk Behme 提交于
The con_id parameter has to match the GPIO description and is automatically extended by the GPIO suffix if not NULL. I had to look into the code to understand this and properly find the GPIO I've been looking for, so document this. Signed-off-by: NDirk Behme <dirk.behme@gmail.com> Acked-by: NAlexandre Courbot <acourbot@nvidia.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Dirk Behme 提交于
With commit 39b2bbe3 ("gpio: add flags argument to gpiod_get*() functions") the gpiod_get*() functions got a 'flags' parameter. Reflect this in the documentation, too. Signed-off-by: NDirk Behme <dirk.behme@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Bjorn Andersson 提交于
It's possible to have gpio chips hanging off unreliable remote buses where the get() operation will fail to acquire a readout of the current gpio state. Propagate these errors to the consumer so that they can act on, retry or ignore these failing reads, instead of treating them as the line being held high. Signed-off-by: NBjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: NAlexandre Courbot <acourbot@nvidia.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Kuninori Morimoto 提交于
8cd14702("gpio: rcar: Add r8a7795 (R-Car H3) support") added GPIO support for r8a7795. r8a7795 based on CONFIG_ARM64. OTOH, GPIO_RCAR driver can be compiled fine on non-ARM. This patch removed ARM dependency for it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Peng Fan 提交于
Need to check return value of irq_alloc_generic_chip, because it may return NULL. 1. Change mxs_gpio_init_gc return type from void to int. 2. Add a new lable out_irqdomain_remove to remove the irq domain when mxc_gpio_init_gc fail. Signed-off-by: NPeng Fan <van.freenix@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Peng Fan 提交于
Need to check return value of irq_alloc_generic_chip, because it may return NULL. 1. Change mxc_gpio_init_gc return type from void to int. 2. Add a new lable out_irqdomain_remove to remove the irq domain when mxc_gpio_init_gc fail. Signed-off-by: NPeng Fan <van.freenix@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> [Manually rebased] Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 13 9月, 2015 7 次提交
-
-
由 Guenter Roeck 提交于
NCT6793D is register compatible with NCT6792D. Also move nct6775_sio_names[] closer to enum kinds to simplify adding new chips. Tested-by: NGrazvydas Ignotas <notasas@gmail.com> Reviewed-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
The STEP_UP_TIME and STEP_DOWN_TIME registers are swapped for all chips but NCT6775. Reported-by: NGrazvydas Ignotas <notasas@gmail.com> Reviewed-by: NJean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris由 Linus Torvalds 提交于
Pull CRIS updates from Jesper Nilsson: "Mostly removal of old cruft of which we can use a generic version, or fixes for code not commonly run in the cris port, but also additions to enable some good debug" * tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: (25 commits) CRISv10: delete unused lib/dmacopy.c CRISv10: delete unused lib/old_checksum.c CRIS: fix switch_mm() lockdep splat CRISv32: enable LOCKDEP_SUPPORT CRIS: add STACKTRACE_SUPPORT CRISv32: annotate irq enable in idle loop CRISv32: add support for irqflags tracing CRIS: UAPI: use generic types.h CRIS: UAPI: use generic shmbuf.h CRIS: UAPI: use generic msgbuf.h CRIS: UAPI: use generic socket.h CRIS: UAPI: use generic sembuf.h CRIS: UAPI: use generic sockios.h CRIS: UAPI: use generic auxvec.h CRIS: UAPI: use generic headers via Kbuild CRIS: UAPI: fix elf.h export CRIS: don't make asm/elf.h depend on asm/user.h CRIS: UAPI: fix ptrace.h CRISv32: Squash compile warnings for axisflashmap CRISv32: Add GPIO driver to the default configs ...
-
由 Linus Torvalds 提交于
rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not a boolean value. Now, admittedly the "!= 0" doesn't really change the value (0 stays as zero, 1 stays as one), but it's not only redundant, it confuses gcc, and causes gcc to warn about the construct switch (rq_data_dir(req)) { case READ: ... case WRITE: ... that we have in a few drivers. Now, the gcc warning is silly and stupid (it seems to warn not about the switch value having a different type from the case statements, but about _any_ boolean switch value), but in this case the code itself is silly and stupid too, so let's just change it, and get rid of warnings like this: drivers/block/hd.c: In function ‘hd_request’: drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool] switch (rq_data_dir(req)) { The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in commit 5953316d ("block: make rq->cmd_flags be 64-bit") and is presumably because the old code (that just did a logical 'and' with 1) would then end up making the type of rq_data_dir() be u64 too. But if we want to retain the old regular integer type, let's just cast the result to 'int' rather than use that rather odd '!= 0'. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Fix up the writeback plugging introduced in commit d353d758 ("writeback: plug writeback at a high level") that then caused problems due to the unplug happening with a spinlock held. * writeback-plugging: writeback: plug writeback in wb_writeback() and writeback_inodes_wb() Revert "writeback: plug writeback at a high level"
-
由 Linus Torvalds 提交于
We had to revert the pluggin in writeback_sb_inodes() because the wb->list_lock is held, but we could easily plug at a higher level before taking that lock, and unplug after releasing it. This does that. Chris will run performance numbers, just to verify that this approach is comparable to the alternative (we could just drop and re-take the lock around the blk_finish_plug() rather than these two commits. I'd have preferred waiting for actual performance numbers before picking one approach over the other, but I don't want to release rc1 with the known "sleeping function called from invalid context" issue, so I'll pick this cleanup version for now. But if the numbers show that we really want to plug just at the writeback_sb_inodes() level, and we should just play ugly games with the spinlock, we'll switch to that. Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Neil Brown <neilb@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 9月, 2015 4 次提交
-
-
由 Linus Torvalds 提交于
I didn't notice this when merging the thermal code from Zhang, but his merge (commit 5a924a07: "Merge branches 'thermal-core' and 'thermal-intel' of .git into next") of the thermal-core and thermal-intel branches was wrong. In thermal-core, commit 17e8351a ("thermal: consistently use int for temperatures") converted the thermal layer to use "int" for temperatures. But in parallel, in the thermal-intel branch commit d0a12625 ("thermal: Add Intel PCH thermal driver") added support for the intel PCH thermal sensor using the old interfaces that used "unsigned long" pointers. This resulted in warnings like this: drivers/thermal/intel_pch_thermal.c:184:14: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] .get_temp = pch_thermal_get_temp, ^ drivers/thermal/intel_pch_thermal.c:184:14: note: (near initialization for ‘tzd_ops.get_temp’) drivers/thermal/intel_pch_thermal.c:186:19: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] .get_trip_temp = pch_get_trip_temp, ^ drivers/thermal/intel_pch_thermal.c:186:19: note: (near initialization for ‘tzd_ops.get_trip_temp’) This fixes it. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge fourth patch-bomb from Andrew Morton: - sys_membarier syscall - seq_file interface changes - a few misc fixups * emailed patches from Andrew Morton <akpm@linux-foundation.org>: revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each" mm/early_ioremap: add explicit #include of asm/early_ioremap.h fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void selftests: enhance membarrier syscall test selftests: add membarrier syscall test sys_membarrier(): system-wide memory barrier (generic, x86) MODSIGN: fix a compilation warning in extract-cert
-
由 Vineet Gupta 提交于
Newer bitfiles needs the reduced clk even for SMP builds Cc: <stable@vger.kernel.org> #4.2 Signed-off-by: NVineet Gupta <vgupta@synopsys.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/jonmason/ntb由 Linus Torvalds 提交于
Pull NTB fixes from Jon Mason: "NTB bug and documentation fixes, new device IDs, performance improvements, and adding a mailing list to MAINTAINERS for NTB" * tag 'ntb-4.3' of git://github.com/jonmason/ntb: NTB: Fix range check on memory window index NTB: Improve index handling in B2B MW workaround NTB: Fix documentation for ntb_peer_db_clear. NTB: Fix documentation for ntb_link_is_up NTB: Use unique DMA channels for TX and RX NTB: Remove dma_sync_wait from ntb_async_rx NTB: Clean up QP stats info NTB: Make the transport list in order of discovery NTB: Add PCI Device IDs for Broadwell Xeon NTB: Add flow control to the ntb_netdev NTB: Add list to MAINTAINERS
-