- 12 12月, 2013 2 次提交
-
-
由 Thomas Huth 提交于
Just like the RESTART order, the START order also has to report BUSY while a STOP request is pending, to avoid that the START might be ignored due to a race condition between the STOP and the START order. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
-
由 Thomas Huth 提交于
This patch adds the missing SIGP order "conditional emergency signal" by calling the "emergency signal" SIGP handler if the required conditions are met. Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
-
- 15 11月, 2013 6 次提交
-
-
由 Sebastian Ott 提交于
Stop hiding scm_block's dependency to the eadm subchannel driver (by using functions provided by the eadm subchannel instead of wrappers provided by the scm bus). This will help userspace recognizing module dependencies (e.g. for building a ramdisk). As a side effect we can get rid of some code reimplementing refcounting between those modules. Reported-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
The new function calls the old ones. The sclp_event_mask_early() is removed and replaced by one invocation of sclp_set_event_mask(0, 0). Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
The early SCLP driver code in sclp_cmd.c belongs to sclp_early.c because it is independent from the 'normal' SCLP driver. So move it to sclp_early.c Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Currently we have hardcoded the HSA size to 32 MiB. With this patch the HSA size is determined dynamically via SCLP in early.c. Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Implement pcibios_remove_bus to free arch specific data when a pci bus is deregistered. While at it remove a useless kzalloc/kfree wrapper. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Cleanup the functions for allocation and setup of bus resources. Do not allocate the same name for each resource but use a per-bus name. Also provide means to cleanup all resources allocated by a bus. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 11月, 2013 2 次提交
-
-
由 Thomas Gleixner 提交于
No point in having this bit defined by architecture. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130917183629.090698799@linutronix.de
-
由 Thomas Gleixner 提交于
There is no reason for per arch hardirq bits. Make them all generic Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130917183628.534494408@linutronix.de
-
- 04 11月, 2013 1 次提交
-
-
由 Martin Schwidefsky 提交于
The IDTE instruction used to flush TLB entries for a specific address space uses the address-space-control element (ASCE) to identify affected TLB entries. The upgrade of a page table adds a new top level page table which changes the ASCE. The TLB entries associated with the old ASCE need to be flushed and the ASCE for the address space needs to be replaced synchronously on all CPUs which currently use it. The concept of a lazy ASCE update with an exception handler is broken. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 31 10月, 2013 2 次提交
-
-
由 Heiko Carstens 提交于
this_cpu_xor() will be removed tree wide during the next merge window. To avoid merge conflicts s390's removal comes via the s390 tree. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The get_tod_clock_ext inline assembly does not specify its output operands correctly. This can cause incorrect code to be generated. Cc: stable@vger.kernel.org # 3.12 Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 24 10月, 2013 27 次提交
-
-
由 Sebastian Ott 提交于
Cleanup function information block used as a modify pci function parameter. Change reserved members to be anonymous. Fix the size of the struct and add proper alignment information. Also put the FIB on the stack. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Add debugfs entries regardless of CONFIG_PCI_DEBUG. Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Optimize this_cpu_* functions for 64 bit by making use of new instructions that came with the interlocked-access facility 1 (load-and-*) and the general-instructions-extension facility (asi, agsi). That way we get rid of the compare-and-swap loop in most cases. Code size reduction (defconfig, -march=z196): 11,555 bytes. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Remove the special cases for the this_cpu_* functions for 32 bit in order to make it easier to add additional code for 64 bit. 32 bit will use the generic implementation. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Make psw32_user_bits a constant value again. This is a leftover of the code which allowed to run the kernel either in primary or home space which got removed with 9a905662 "s390/uaccess: always run the kernel in home space". Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Fix the following bugs: - When returning from a signal the signal handler copies the saved psw mask from user space and uses parts of it. Especially it restores the RI bit unconditionally. If however the machine doesn't support RI, or RI is disabled for the task, the last lpswe instruction which returns to user space will generate a specification exception. To fix this check if the RI bit is allowed to be set and kill the task if not. - In the compat mode signal handler code the RI bit of the psw mask gets propagated to the mask of the return psw: if user space enables RI in the signal handler, RI will also be enabled after the signal handler is finished. This is a different behaviour than with 64 bit tasks. So change this to match the 64 bit semantics, which restores the original RI bit value. - Fix similar oddities within the ptrace code as well. Reviewed-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The FPC_VALID_MASK has been used to check the validity of the value to be loaded into the floating-point-control register. With the introduction of the floating-point extension facility and the decimal-floating-point additional bits have been defined which need to be checked in a non straight forward way. So far these bits have been ignored which can cause an incorrect results for decimal- floating-point operations, e.g. an incorrect rounding mode to be set after signal return. The static check with the FPC_VALID_MASK is replaced with a trial load of the floating-point-control value, see test_fp_ctl. In addition an information leak with the padding word between the floating-point-control word and the floating-point registers in the s390_fp_regs is fixed. Reported-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Peter Oberparleiter 提交于
Missing parenthesis may cause problems when using the defines together with operations of higher precedence. Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Currently zfpcdump can only collect registers for up to CONFIG_NR_CPUS CPUss. This dependency is not necessary. So remove it by dynamically allocating the save area array. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Chen Gang 提交于
The type of 'v->counter' is always 'int', and related inline assembly code also process 'int', so use 'unsigned int' instead of 'unsigned long' for the 'mask'. Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
With dirty and referenced bits implemented in software it is unnecessary to initialize the storage key for every page. With this patch not a single storage key operation is done for a system that does not use KVM. For KVM set_pte_at/pgste_set_key will do the initialization for the guest view of the storage key when the mapping for the page is established in the host. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
- turn some macros into functions - merge two almost identical versions for 32/64 bit - add BUILD_BUG_ON() check to make sure the passed in array is large enough Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Simplify the uaccess code by removing the user_mode=home option. The kernel will now always run in the home space mode. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
find_first_bit_left() and friends have nothing to do with the normal LSB0 bit numbering for big endian machines used in Linux (least significant bit has bit number 0). Instead they use MSB0 bit numbering, where the most signficant bit has bit number 0. So rename find_first_bit_left() and friends to find_first_bit_inv(), to avoid any confusion. Also provide inv versions of set_bit, clear_bit and test_bit. This also removes the confusing use of e.g. set_bit() in airq.c which uses a "be_to_le" bit number conversion, which could imply that instead set_bit_le() could be used. But that is entirely wrong since the _le bitops variant uses yet another bit numbering scheme. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Since z9 109 we have the flogr instruction which can be used to implement optimized versions of __ffs, ffs, __fls, fls and fls64. So implement and use them, instead of the generic variants. This reduces the size of the kernel image (defconfig, -march=z9-109) by 19,648 bytes. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Just like all other architectures we should use out-of-line find bit operations, since the inline variant bloat the size of the kernel image. And also like all other architecures we should only supply optimized variants of the __ffs, ffs, etc. primitives. Therefore this patch removes the inlined s390 find bit functions and uses the generic out-of-line variants instead. The optimization of the primitives follows with the next patch. With this patch also the functions find_first_bit_left() and find_next_bit_left() have been reimplemented, since logically, they are nothing else but a find_first_bit()/find_next_bit() implementation that use an inverted __fls() instead of __ffs(). Also the restriction that these functions only work on machines which support the "flogr" instruction is gone now. This reduces the size of the kernel image (defconfig, -march=z9-109) by 144,482 bytes. Alone the size of the function build_sched_domains() gets reduced from 7 KB to 3,5 KB. We also git rid of unused functions like find_first_bit_le()... Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
Add the debug_level_enabled() function to check if debug events for a particular level would be logged. This might help to save cycles for debug events that require additional information collection. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Since zEC12 we have the interlocked-access facility 2 which allows to use the instructions ni/oi/xi to update a single byte in storage with compare-and-swap semantics. So change set_bit(), clear_bit() and change_bit() to generate such code instead of a compare-and-swap loop (or using the load-and-* instruction family), if possible. This reduces the text segment by yet another 8KB (defconfig). Alternatively the long displacement variants niy/oiy/xiy could have been used, but the extended displacement field is usually not needed and therefore would only increase the size of the text segment again. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Remove CONFIG_SMP from bitops code. This reduces the C code significantly but also generates better code for the SMP case. This means that for !CONFIG_SMP set_bit() and friends now also have compare and swap semantics (read: more code). However nobody really cares for !CONFIG_SMP and this is the trade-off to simplify the SMP code which we do care about. The non-atomic bitops like __set_bit() now generate also better code because the old code did not have a __builtin_contant_p() check for the CONFIG_SMP case and therefore always generated the inline assembly variant. However the inline assemblies for the non-atomic case now got completely removed since gcc can produce better code, which accesses less memory operands. test_bit() got also a bit simplified since it did have a __builtin_constant_p() check, however two identical code pathes for each case (written differently). In result this mainly reduces the to be maintained code but is not very relevant for code generation, since there are not many non-atomic bitops usages that we care about. (code reduction defconfig kernel image before/after: 560 bytes). Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
- add a typecheck to the defines to make sure they operate on an atomic_t - simplify inline assembly constraints - keep variable names common between functions Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
If the interlocked-access facility 1 is available we can use the asi and agsi instructions for interlocked updates if the to be added value is a contanst and small (in the range of -128..127). asi and agsi do not not return the old or new value, therefore these instructions can only be used for atomic_(add|sub|inc|dec)[64]. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Since we have an in-kernel disassembler we can make sure that there won't be any kprobes set on random data. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Now that the in-kernel disassembler has an own header file move the disassembler related function prototypes to that header file. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Suzuki K. Poulose 提交于
The patch moves some of the definitions to a header file. No functional changes involved. I have retained the Copyright Statement from the original file. Signed-off-by: NSuzuki K Poulose <suzuki@in.ibm.com> [Heiko Carstens: rename s390-dis.h to dis.h] Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Same as for bitops: make use of the interlocked-access facility 1 instructions which allow to atomically update storage locations without a compare-and-swap loop. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Get rid of the own atomic_sub_return() implementation. Otherwise we can't make use of the interlocked-access facility 1 instructions for atomic_sub_return(), since there is no "load and subtract" instruction available. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-