- 18 11月, 2005 40 次提交
-
-
由 Hans Reiser 提交于
2.6.14 has this exported, and reiser4 (at least) uses it. Put things back the way they were. Signed-off-by: NVladimir V. Saveliev <vs@namesys.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul E. McKenney 提交于
One issue with the RCU torture test is that the current error flagging can be lost in dmesg. This patch adds a "SUCCESS"/"FAILURE" string to the line that flags the end of the test, where it can easily be seen with "dmesg | tail" at the end of the test. Also adds tests of architecture-specific memory barriers -- or, more likely, of the RCU torture test itself. Cc: <vatsa@in.ibm.com> Signed-off-by: N"Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrey Volkov 提交于
Fix copy-paste bug in ohci-ppc-soc.c(ohci_hcd_ppc_soc_drv_remove) Signed-off-by: NAndrey Volkov <avolkov@varma-el.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Properly clear the memory, and set "pr->flags.power" only if a C2 or deeper state is valid (to make the code match both the comment and previous behaviour). This fixes a boot-time lockup reported by Maneesh Soni when using "maxcpus=1". Acked-by: NManeesh Soni <maneesh@in.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Mackerras 提交于
The code Ben H added needs <linux/pci.h> for things like pci_dev, etc. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
make defconfig will now use arch/powerpc/configs/ppc64_defconfig if running on a ppc64 system. I need to add an arch/powerpc/configs/ppc_defconfig sometime. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This makes 32-bit CHRP systems use the RTAS time-of-day routines if available. It fixes a bug in the RTAS time-of-day routines where they were storing a 64-bit timebase value in an unsigned long by making those variables u64. Also, the direct-access time-of-day routines had the wrong convention for the month and year in the struct rtc_time. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
pseries_dedicated_idle() was using __get_tb which used to be defined in asm/delay.h. Change it to use get_tb from asm/time.h, which is in fact exactly the same thing. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This also deletes the now-unused Makefiles under arch/ppc64. Both of the files moved over could use some merging, but for now I have moved them as-is and arranged for them to be used only in 64-bit kernels. For 32-bit kernels we still use arch/ppc/kernel/idle.c and drivers/char/generic_nvram.c as before. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Mike Kravetz 提交于
The config option SPAN_OTHER_NODES was created so that we could make pSeries numa layouts work within the DISCONTIG memory model. Now that DISCONTIG has been replaced by SPARSEMEM, we can eliminate this option. I'll be sending a separate patch to Andrew to remove the arch independent code as pSeries was the only arch that needed this. Signed-off-by: NMike Kravetz <kravetz@us.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This patch merges align.c, the result isn't quite what was in ppc64 nor what was in ppc32 :) It should implement all the functionalities of both though. Kumar, since you played with that in the past, I suppose you have some test cases for verifying that it works properly before I dig out the 601 machine ? :) Since it's likely that I won't be able to test all scenario, code inspection is much welcome. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
My earlier merge of delay.h introduced a timebase-based udelay for 32-bit machines but also broke the 601, which doesn't have the timebase register. This fixes it by using the 601's RTC register on the 601, and also moves __delay() and udelay() to be out-of-line in arch/powerpc/kernel/time.c. These functions aren't really performance critical, after all. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kumar Gala 提交于
When we moved things around in irq.h seq_file became an issue. Fix warnings related to its usage. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kumar Gala 提交于
The SVRs for MPC8343/E were incorrect and really the SVRs for MPC8347/E. Signed-off-by: NDavid Updegraff <dave@cray.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Segher Boessenkool 提交于
Reserve the Maple RTC I/O resource. Needed now we use genrtc. Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
Replacing the string labels with numbers saves 117 bytes in the final zImage. These local labels are not discared. Signed-off-by: NOlaf Hering <olh@suse.de> arch/powerpc/boot/crt0.S | 23 +++++++++++------------ 1 files changed, 11 insertions(+), 12 deletions(-) Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
The fix to topology.h (5cfccd7f) seems to have a typeo, struct sched_domain has an idle_idx member but not an idle_id member. I assume this is the fix. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Kumar Gala 提交于
When we moved things around in irq.h seq_file became an issue. Fix warnings related to its usage. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David S. Miller 提交于
Revert: 8225ccba Based upon a report by Yan Zheng. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roman Zippel 提交于
On Thu, 17 Nov 2005, David Gómez wrote: > I found out that if i select NET_CLS_ROUTE4, save my changes and exit > menuconfig, execute again make menuconfig and go to QoS options, then the new > available options are visible. So menuconfig has some problem refreshing > contents :? No, they were there before too, but you have to go up one level to see them. It's better in 2.6.15-rc1-git5, but the menu structure is still a little messed up, the patch below properly indents all menu entries. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Noticed by Olaf Hering. The comparisons want a u8 here (the data type on the left-hand branch is a u8 structure member, and the constant on the right-hand branch is "~((u8) 128)"), but C turns it into an integer so we get: net/llc/llc_c_ac.c: In function `llc_conn_ac_inc_npta_value': net/llc/llc_c_ac.c:998: warning: comparison is always true due to limited range of data type net/llc/llc_c_ac.c:999: warning: large integer implicitly truncated to unsigned type Fix this up by explicitly recasting the right-hand branch constant into a "u8" once more. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harald Welte 提交于
Since we've converted the ftp/irc/tftp helpers to use the new module_parm_array() some time ago, we ware accidentially using signed data types - thus preventing those modules from being used on ports >= 32768. This patch fixes it by using 'ushort' module parameters. Thanks to Jan Nijs for reporting this bug. Signed-off-by: NHarald Welte <laforge@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
So things like on-line resizing et al. work. Based almost entirely upon a patch by Guido Gnther <agx@sigxcpu.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
There is a compile error that crept in with the last patch of TCP patches. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jens Axboe 提交于
We must reassign z before looping through the zones kicking kswapd, since it will be NULL if we hit an OOM condition and jump back to the beginning again. 'z' is initially assigned before the restart: label. So move the restart label up a little. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Greg Kroah-Hartman 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Kroah-Hartman 提交于
It was causing too many problems, and this is not the proper type of driver for this device. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Greg Kroah-Hartman 提交于
This lets us remove a lot of code in the drivers that were all checking the same thing. It also found some bugs in a few of the drivers, which has been fixed up. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Richard Purdie 提交于
Fix an error in the OHCI lh7a404 driver after the platform device conversion. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antti Andreimann 提交于
This small patch adds a device ID used by older Maxtor OneTouch drives (the ones with blue face-plate instead of the fancy silver one used in newer models). The button on those drives works well with the current driver. From: Antti Andreimann <Antti.Andreimann@mail.ee> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
drivers/usb/core/devio.c: In function `proc_ioctl_compat': drivers/usb/core/devio.c:1401: warning: passing arg 1 of `compat_ptr' makes integer from pointer without a cast Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Herbert Xu 提交于
this patch from Herbert Xu fixes a race by moving termination of the URBs into close() exclusively. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NOliver Neukum <oliver@neukum.name> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Daniel Drake 提交于
Peter Favrholdt reported that his Kodak flash device was getting detected as a CDROM, and he helped me track this down to the fact that the device takes a long time (approx 440ms!) to reset. This patch increases the delay to 500ms, which solves the problem. Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oliver Neukum 提交于
the scsi layer now uses very short sg lists. This breaks the microtek driver. Here is a patch fixes this and some other issues. Signed-off-by: NOliver Neukum <oliver@neukum.name> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Luiz Fernando Capitulino 提交于
Updates pl2303_update_line_status() to handle X75 and SX1 Siemens mobiles Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Luiz Fernando Capitulino 提交于
This patch adds two new Siemens mobiles IDs for the pl2303 driver. Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-