- 03 9月, 2010 5 次提交
-
-
由 Samu Onkalo 提交于
DMA is set to use burst mode also for source channel. It should descrease memory bandwidth needs. DMA synchronization is set to use prefetch mechanism. SHAM block is behind L4 bus and it doesn't have fifo. SHAM block is stalling as long as the new data is available. It takes time to fetch data from memory and transfer it via L4 bus. With prefetch enabled, data is waiting in DMA fifo and SHAM block receives new data block faster. This increases SHA processing speed up to 30 percent depending on the bus / memory load. Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com> Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Chuck Ebbert 提交于
Signed-off-by: NChuck Ebbert <cebbert@redhat.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Dmitry Kasatkin 提交于
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Dmitry Kasatkin 提交于
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Namhyung Kim 提交于
parallel_data->queue is a percpu pointer but was missing __percpu markup. Add it. Signed-off-by: NNamhyung Kim <namhyung@gmail.com> Acked-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 13 8月, 2010 1 次提交
-
-
由 Steffen Klassert 提交于
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 09 8月, 2010 1 次提交
-
-
由 Herbert Xu 提交于
This reverts commit 8b9cfdca. This patch needs to wait for the HWRNG API to start using void * for priv first. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 06 8月, 2010 23 次提交
-
-
由 Herbert Xu 提交于
On Thu, Aug 05, 2010 at 07:01:21PM -0700, Linus Torvalds wrote: > On Thu, Aug 5, 2010 at 6:40 PM, Herbert Xu <herbert@gondor.hengli.com.au> wrote: > > > > -config CRYPTO_MANAGER_TESTS > > - bool "Run algolithms' self-tests" > > - default y > > - depends on CRYPTO_MANAGER2 > > +config CRYPTO_MANAGER_DISABLE_TESTS > > + bool "Disable run-time self tests" > > + depends on CRYPTO_MANAGER2 && EMBEDDED > > Why do you still want to force-enable those tests? I was going to > complain about the "default y" anyway, now I'm _really_ complaining, > because you've now made it impossible to disable those tests. Why? As requested, this patch sets the default to y and removes the EMBEDDED dependency. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch fixes a serious bug in the test disabling patch where it can cause an spurious load of the cryptomgr module even when it's compiled in. It also negates the test disabling option so that its absence causes tests to be enabled. The Kconfig option is also now behind EMBEDDED. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Szilveszter Ördög 提交于
If a scatterwalk chain contains an entry with an unaligned offset then hash_walk_next() will cut off the next step at the next alignment point. However, if the entry ends before the next alignment point then we a loop, which leads to a kernel oops. Fix this by checking whether the next aligment point is before the end of the current entry. Signed-off-by: NSzilveszter Ördög <slipszi@gmail.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (204 commits) agp: intel-agp: do not use PCI resources before pci_enable_device() agp: efficeon-agp: do not use PCI resources before pci_enable_device() drm: kill BKL from common code drm/kms: Simplify setup of the initial I2C encoder config. drm,io-mapping: Specify slot to use for atomic mappings drm/radeon/kms: only expose underscan on avivo chips drm/radeon: add new pci ids drm: Cleanup after failing to create master->unique and dev->name drm/radeon: tone down overchatty acpi debug messages. drm/radeon/kms: enable underscan option for digital connectors drm/radeon/kms: fix calculation of h/v scaling factors drm/radeon/kms/igp: sideport is AMD only drm/radeon/kms: handle the case of no active displays properly in the bandwidth code drm: move ttm global code to core drm drm/i915: Clear the Ironlake dithering flags when the pipe doesn't want it. drm/radeon/kms: make sure HPD is set to NONE on analog-only connectors drm/radeon/kms: make sure rio_mem is valid before unmapping it drm/agp/i915: trim stolen space to 32M drm/i915: Unset cursor if out-of-bounds upon mode change (v4) drm/i915: Unreference object not handle on creation ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb由 Linus Torvalds 提交于
* 'kms-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb,docs: Update the kgdb docs to include kms drm_fb_helper: Preserve capability to use atomic kms i915: when kgdb is active display compression should be off drm/i915: use new fb debug hooks drm: add KGDB/KDB support fb: add hooks to handle KDB enter/exit kgdboc: Add call backs to allow kernel mode switching vt,console,kdb: automatically set kdb LINES variable vt,console,kdb: implement atomic console enter/leave functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: debug_core,kdb: fix crash when arch does not have single step kgdb,x86: use macro HBP_NUM to replace magic number 4 kgdb,mips: remove unused kgdb_cpu_doing_single_step operations mm,kdb,kgdb: Add a debug reference for the kdb kmap usage KGDB: Remove set but unused newPC ftrace,kdb: Allow dumping a specific cpu's buffer with ftdump ftrace,kdb: Extend kdb to be able to dump the ftrace buffer kgdb,powerpc: Replace hardcoded offset by BREAK_INSTR_SIZE arm,kgdb: Add ability to trap into debugger on notify_die gdbstub: do not directly use dbg_reg_def[] in gdb_cmd_reg_set() gdbstub: Implement gdbserial 'p' and 'P' packets kgdb,arm: Individual register get/set for arm kgdb,mips: Individual register get/set for mips kgdb,x86: Individual register get/set for x86 kgdb,kdb: individual register set and and get API gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol kgdb: remove custom hex_to_bin()implementation
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits) of/platform: Register of_platform_drivers with an "of:" prefix of/address: Clean up function declarations of/spi: call of_register_spi_devices() from spi core code of: Provide default of_node_to_nid() implementation. of/device: Make of_device_make_bus_id() usable by other code. of/irq: Fix endian issues in parsing interrupt specifiers of: Fix phandle endian issues of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string of: remove of_default_bus_ids of: make of_find_device_by_node generic microblaze: remove references to of_device and to_of_device sparc: remove references to of_device and to_of_device powerpc: remove references to of_device and to_of_device of/device: Replace of_device with platform_device in includes and core code of/device: Protect against binding of_platform_drivers to non-OF devices of: remove asm/of_device.h of: remove asm/of_platform.h of/platform: remove all of_bus_type and of_platform_bus_type references of: Merge of_platform_bus_type with platform_bus_type drivercore/of: Add OF style matching to platform bus ... Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just some obj-y removals by the devicetree branch, while the microblaze updates added a new file.
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: apparmor: depends on NET
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: scripts/dtc: Fix a resource leak Documentation: fix ubuntu distro name MAINTAINERS: Update kbuild git URLs Add support for the C variable in the coccicheck script Add scripts/coccinelle/deref_null.cocci Add scripts/coccinelle/err_cast.cocci Add scripts/coccinelle/resource_size.cocci Add scripts/coccinelle/alloc/kzalloc-simple.cocci Add scripts/coccinelle/alloc/drop_kmalloc_cast.cocci Add Documentation/coccinelle.txt Add a target to use the Coccinelle checker scripts: decodecode: remove bashisms Makefile: clarify a comment checkkconfigsymbols.sh: Kconfig symbols sometimes have lowercase letters scripts: add nconf into gitignore file
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: kbuild: Change section of generated debian packages to kernel kbuild: Mark that the packages generated conform to Standards-Version 3.8.4 kbuild: Add homepage field to debian/control file
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (26 commits) kconfig: add savedefconfig kconfig: code refactoring in confdata.c kconfig: refactor code in symbol.c kconfig: add alldefconfig kconfig: print more info when we see a recursive dependency kconfig: save location of config symbols kconfig: change nonint_oldconfig to listnewconfig kconfig: rename loose_nonint_oldconfig => oldnoconfig kconfig: use long options in conf kconfig: fix MODULES-related bug in case of no .config kconfig: make randconfig fair for booleans kconfig: Don't write invisible choice values kbuild: Warn on selecting symbols with unmet direct dependencies scripts:conf.c Fix warning: variable 'type' set but not used menuconfig: truncate list items menuconfig: fix to center checklist correctly in a corner case xconfig: add support to show hidden options which have prompts xconfig: remove unused function xconfig: clean up gconfig: fix null pointer warning ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: modpost: support objects with more than 64k sections trivial: fix a typo in a filename frv: clean up arch/frv/Makefile kbuild: allow assignment to {A,C}FLAGS_KERNEL on the command line kbuild: allow assignment to {A,C,LD}FLAGS_MODULE on the command line Kbuild: Add option to set -femit-struct-debug-baseonly Makefile: "make kernelrelease" should show the correct full kernel version Makefile.build: make KBUILD_SYMTYPES work again
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* 'modules' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: cleanup comments, remove noinline module: group post-relocation functions into post_relocation() module: move module args strndup_user to just before use module: pass load_info into other functions module: fix sysfs cleanup for !CONFIG_SYSFS module: sysfs cleanup module: layout_and_allocate module: fix crash in get_ksymbol() when oopsing in module init module: kallsyms functions take struct load_info module: refactor out section header rewriting: FIX modversions module: refactor out section header rewriting module: add load_info module: reduce stack usage for each_symbol() module: refactor load_module part 5 module: refactor load_module part 4 module: refactor load_module part 3 module: refactor load_module part 2 module: refactor load_module module: module_unload_init() cleanup
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: virtio_blk: Remove VBID ioctl virtio_blk: Add 'serial' attribute to virtio-blk devices (v2) virtio_blk: support barriers without FLUSH feature
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen由 Linus Torvalds 提交于
* 'upstream/xen' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (23 commits) xen/panic: use xen_reboot and fix smp_send_stop Xen: register panic notifier to take crashes of xen guests on panic xen: support large numbers of CPUs with vcpu info placement xen: drop xen_sched_clock in favour of using plain wallclock time pvops: do not notify callers from register_xenstore_notifier Introduce CONFIG_XEN_PVHVM compile option blkfront: do not create a PV cdrom device if xen_hvm_guest support multiple .discard.* sections to avoid section type conflicts xen/pvhvm: fix build problem when !CONFIG_XEN xenfs: enable for HVM domains too x86: Call HVMOP_pagetable_dying on exit_mmap. x86: Unplug emulated disks and nics. x86: Use xen_vcpuop_clockevent, xen_clocksource and xen wallclock. implement O_NONBLOCK for /proc/xen/xenbus xen: Fix find_unbound_irq in presence of ioapic irqs. xen: Add suspend/resume support for PV on HVM guests. xen: Xen PCI platform device driver. x86/xen: event channels delivery on HVM. x86: early PV on HVM features initialization. xen: Add support for HVM hypercalls. ...
-
由 Johannes Berg 提交于
I'm trying to generate a <set> of <book>s in docbook for wireless to link together all the cfg80211 and mac80211 documentation. However, docbook will generate "re01.html" anew for each book for the first <refentry>, presumably due to a bug in the stylesheets. An effective workaround is to use IDs for the filenames, which makes them more descriptive as well, e.g. API-enum-ieee80211-band.html. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nicolas Kaiser 提交于
Fixed some typos and wording. Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matt Mooney 提交于
Update section 3.7 examples to reflect the current state of the Makefiles used. Fix spelling and grammar errors along with flow of text. Signed-off-by: Nmatt mooney <mfm@muteddisk.com> Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matt Mooney 提交于
Update section 3.2 and 3.5 example, along with text in section 3.5 to reflect change. Signed-off-by: Nmatt mooney <mfm@muteddisk.com> Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matt Mooney 提交于
Update section 3.3 Loadable module goals - obj-m, from $(<module_name>-objs) to $(<module_name>-y) for easier addition of conditional objects to the module. The examples are also updated to reflect the current state of each Makefile used. Signed-off-by: Nmatt mooney <mfm@muteddisk.com> Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tommi Rantala 提交于
Trivial typo fixes. Signed-off-by: NTommi Rantala <tt.rantala@gmail.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Satoru Takeuchi 提交于
- sys_io_destroy(): acutually return -EINVAL if the context pointed to is invalidIndex: linux-2.6.33-rc4/fs/aio.c - sys_io_getevents(): An argument specifying timeout is not `when', but `timeout'. - sys_io_getevents(): Should describe what is returned if this syscall succeeds. Signed-off-by: NSatoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Reviewed-by: NJeff Moyer <jmoyer@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (79 commits) powerpc/8xx: Add support for the MPC8xx based boards from TQC powerpc/85xx: Introduce support for the Freescale P1022DS reference board powerpc/85xx: Adding DTS for the STx GP3-SSA MPC8555 board powerpc/85xx: Change deprecated binding for 85xx-based boards powerpc/tqm85xx: add a quirk for ti1520 PCMCIA bridge powerpc/tqm85xx: update PCI interrupt-map attribute powerpc/mpc8308rdb: support for MPC8308RDB board from Freescale powerpc/fsl_pci: add quirk for mpc8308 pcie bridge powerpc/85xx: Cleanup QE initialization for MPC85xxMDS boards powerpc/85xx: Fix booting for P1021MDS boards powerpc/85xx: Fix SWIOTLB initalization for MPC85xxMDS boards powerpc/85xx: kexec for SMP 85xx BookE systems powerpc/5200/i2c: improve i2c bus error recovery of/xilinxfb: update tft compatible versions powerpc/fsl-diu-fb: Support setting display mode using EDID powerpc/5121: doc/dts-bindings: update doc of FSL DIU bindings powerpc/5121: shared DIU framebuffer support powerpc/5121: move fsl-diu-fb.h to include/linux powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor powerpc/512x: add clock structure for Video-IN (VIU) unit ...
-
- 05 8月, 2010 10 次提交
-
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (49 commits) microblaze: Add KGDB support microblaze: Support brki rX, 0x18 for user application debugging microblaze: Remove nop after MSRCLR/SET, MTS, MFS instructions microblaze: Simplify syscall rutine microblaze: Move PT_MODE saving to delay slot microblaze: Fix _interrupt function microblaze: Fix _user_exception function microblaze: Put together addik instructions microblaze: Use delay slot in syscall macros microblaze: Save kernel mode in delay slot microblaze: Do not mix register saving and mode setting microblaze: Move SAVE_STATE upward microblaze: entry.S: Macro optimization microblaze: Optimize hw exception rutine microblaze: Implement clear_ums macro and fix SAVE_STATE macro microblaze: Remove additional setup for kernel_mode microblaze: Optimize SAVE_STATE macro microblaze: Remove additional loading microblaze: Completely remove working with R11 register microblaze: Do not setup BIP in _debug_exception ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: arch/sparc/mm: Use GFP_KERNEL MAINTAINERS: Add trailing slash to SBUS path. sbus: autoconvert trivial BKL users to private mutex
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] increase ia64 static per cpu area [IA64] Put ia64 config files on the Uwe Kleine-König diet [IA64] perfmon: convert to unlocked_ioctl [IA64] beautify vmlinux.lds.h
-
git://git.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (150 commits) MIPS: PowerTV: Separate PowerTV USB support from non-USB code MIPS: strip the un-needed sections of vmlinuz MIPS: Clean up the calculation of VMLINUZ_LOAD_ADDRESS MIPS: Clean up arch/mips/boot/compressed/decompress.c MIPS: Clean up arch/mips/boot/compressed/ld.script MIPS: Unify the suffix of compressed vmlinux.bin MIPS: PowerTV: Add Gaia platform definitions. MIPS: BCM47xx: Fix nvram_getenv return value. MIPS: Octeon: Allow more than 3.75GB of memory with PCIe MIPS: Clean up notify_die() usage. MIPS: Remove unused task_struct.trap_no field. Documentation: Mention that KProbes is supported on MIPS SAMPLES: kprobe_example: Make it print something on MIPS. MIPS: kprobe: Add support. MIPS: Add instrunction format for BREAK and SYSCALL MIPS: kprobes: Define regs_return_value() MIPS: Ritually kill stupid printk. MIPS: Octeon: Disallow MSI-X interrupt and fall back to MSI interrupts. MIPS: Octeon: Support 256 MSI on PCIe MIPS: Decode core number for R2 CPUs. ...
-
由 Jason Wessel 提交于
Update the kgdb docs to include information about kernel mode setting support. [Randy Dunlap <rdunlap@xenotime.net>: grammatical corrections] CC: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6: xtensa: Disable PCI and nfsroot on simulation target xtensa: Add missing include in coprocessor.h xtensa: Fix the network driver for the simulator target xtensa: Shuffle include statements to fix linker script xtensa: Add -mforce-no-pic option is supported xtensa: Fixes due to bss boundary symbol name changes. xtensa: Fix linker script patch-up xtensa: Fix FLUSH_DCACHE macro for some variants.
-
由 Nick Piggin 提交于
Signed-off-by: NNick Piggin <npiggin@kernel.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jason Wessel 提交于
Commit 5349ef31 (drm/fb: fix FBIOGET/PUT_VSCREENINFO pixel clock handling) changed the logic of when a pixclock was valid vs invalid. The atomic kernel mode setting used by the kernel debugger relies upon the drm_fb_helper_check_var() to always return -EINVAL. Until a better solution exists, this behavior will be restored. CC: David Airlie <airlied@linux.ie> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-
由 Jason Wessel 提交于
If the HW compression is left on, the call backs from the HW will crash the kernel. The only time this code is called is when kernel mode setting is in use with kgdb and the kdb shell. The atomic display pipe handler callback will reset everything when kgdb restores kernel to the run state. Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> CC: David Airlie <airlied@linux.ie>
-
由 Jesse Barnes 提交于
Implement atomic kernel mode settings using the fb layer's debug hook system for supporting debugger interaction. Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
-