- 17 11月, 2009 3 次提交
-
-
由 H. Peter Anvin 提交于
Make set_memory_x/set_memory_nx directly aware of if NX is supported in the system or not, rather than requiring that every caller assesses that support independently. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tejun Heo <tj@kernel.org> Cc: Tim Starling <tstarling@wikimedia.org> Cc: Hannes Eder <hannes@hanneseder.net> LKML-Reference: <1258154897-6770-4-git-send-email-hpa@zytor.com> Acked-by: NKees Cook <kees.cook@canonical.com>
-
由 H. Peter Anvin 提交于
Always save the value of EFER, regardless of the state of NX. Since EFER may not actually exist, use rdmsr_safe() to do so. v2: check the return value from rdmsr_safe() instead of relying on the output values being unchanged on error. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Nigel Cunningham <nigel@tuxonice.net> LKML-Reference: <1258154897-6770-3-git-send-email-hpa@zytor.com> Acked-by: NKees Cook <kees.cook@canonical.com>
-
由 H. Peter Anvin 提交于
Use symbolic constants rather than hard-coded values when setting EFER.NX in head_32.S, and do a more rigorous test for the validity of the response when probing for the extended CPUID range. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> LKML-Reference: <1258154897-6770-2-git-send-email-hpa@zytor.com> Acked-by: NKees Cook <kees.cook@canonical.com>
-
- 12 11月, 2009 1 次提交
-
-
由 Yinghai Lu 提交于
Instead of using bootmem, try find_e820_area()/reserve_early(), and call acpi_reserve_memory() early, to allocate the wakeup trampoline code area below 1M. This is more reliable, and it also removes a dependency on bootmem. -v2: change function name to acpi_reserve_wakeup_memory(), as suggested by Rafael. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Acked-by: NH. Peter Anvin <hpa@zytor.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: pm list <linux-pm@lists.linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4AFA210B.3020207@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 03 11月, 2009 1 次提交
-
-
由 Suresh Siddha 提交于
On x86_64, kernel text mappings are mapped read-only with CONFIG_DEBUG_RODATA. So use the kernel identity mapping instead of the kernel text mapping to modify the kernel text. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Tested-by: NSteven Rostedt <rostedt@goodmis.org> LKML-Reference: <20091029024821.080941108@sbs-t61.sc.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 10月, 2009 3 次提交
-
-
由 Suresh Siddha 提交于
Add a comment explaining why RODATA is aligned to 2 MB. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Suresh Siddha 提交于
CONFIG_DEBUG_RODATA chops the large pages spanning boundaries of kernel text/rodata/data to small 4KB pages as they are mapped with different attributes (text as RO, RODATA as RO and NX etc). On x86_64, preserve the large page mappings for kernel text/rodata/data boundaries when CONFIG_DEBUG_RODATA is enabled. This is done by allowing the RODATA section to be hugepage aligned and having same RWX attributes for the 2MB page boundaries Extra Memory pages padding the sections will be freed during the end of the boot and the kernel identity mappings will have different RWX permissions compared to the kernel text mappings. Kernel identity mappings to these physical pages will be mapped with smaller pages but large page mappings are still retained for kernel text,rodata,data mappings. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20091014220254.190119924@sbs-t61.sc.intel.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Suresh Siddha 提交于
In the first 2MB, kernel text is co-located with kernel static page tables setup by head_64.S. CONFIG_DEBUG_RODATA chops this 2MB large page mapping to small 4KB pages as we mark the kernel text as RO, leaving the static page tables as RW. With CONFIG_DEBUG_RODATA disabled, OLTP run on NHM-EP shows 1% improvement with 2% reduction in system time and 1% improvement in iowait idle time. To recover this, move the kernel static page tables to .data section, so that we don't have to break the first 2MB of kernel text to small pages with CONFIG_DEBUG_RODATA. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20091014220254.063193621@sbs-t61.sc.intel.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 13 10月, 2009 2 次提交
-
-
由 David Rientjes 提交于
This is the counterpart to "x86: export k8 physical topology" for SRAT. It is not as invasive because the acpi code already seperates node setup into detection and registration steps, with the exception of registering e820 active regions in acpi_numa_memory_affinity_init(). This is now moved to acpi_scan_nodes() if NUMA emulation is disabled or deferred. acpi_numa_init() now returns a value which specifies whether an underlying SRAT was located. If so, that topology can be used by the emulation code to interleave emulated nodes over physical nodes or to register the nodes for ACPI. acpi_get_nodes() may now be used to export the srat physical topology of the machine for NUMA emulation. Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Ankita Garg <ankita@in.ibm.com> Cc: Len Brown <len.brown@intel.com> LKML-Reference: <alpine.DEB.1.00.0909251518580.14754@chino.kir.corp.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 David Rientjes 提交于
To eventually interleave emulated nodes over physical nodes, we need to know the physical topology of the machine without actually registering it. This does the k8 node setup in two parts: detection and registration. NUMA emulation can then used the physical topology detected to setup the address ranges of emulated nodes accordingly. If emulation isn't used, the k8 nodes are registered as normal. Two formals are added to the x86 NUMA setup functions: `acpi' and `k8'. These represent whether ACPI or K8 NUMA has been detected; both cannot be true at the same time. This specifies to the NUMA emulation code whether an underlying physical NUMA topology exists and which interface to use. This patch deals solely with separating the k8 setup path into Northbridge detection and registration steps and leaves the ACPI changes for a subsequent patch. The `acpi' formal is added here, however, to avoid touching all the header files again in the next patch. This approach also ensures emulated nodes will not span physical nodes so the true memory latency is not misrepresented. k8_get_nodes() may now be used to export the k8 physical topology of the machine for NUMA emulation. Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Ankita Garg <ankita@in.ibm.com> Cc: Len Brown <len.brown@intel.com> LKML-Reference: <alpine.DEB.1.00.0909251518400.14754@chino.kir.corp.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 10月, 2009 2 次提交
-
-
由 Yinghai Lu 提交于
As reported in http://bugzilla.kernel.org/show_bug.cgi?id=13940 on some system when acpi are enabled, acpi clears some BAR for some devices without reason, and kernel will need to allocate devices for them. It then apparently hits some undocumented resource conflict, resulting in non-working devices. Try to increase alignment to get more safe range for unassigned devices. Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
-
- 08 10月, 2009 1 次提交
-
-
由 Arjan van de Ven 提交于
Now that range timers and deferred timers are common, I found a problem with these using the "perf timechart" tool. Frans Pop also reported high scheduler latencies via LatencyTop, when using iwlagn. It turns out that on x86, these two 'opportunistic' timers only get checked when another "real" timer happens. These opportunistic timers have the objective to save power by hitchhiking on other wakeups, as to avoid CPU wakeups by themselves as much as possible. The change in this patch runs this check not only at timer interrupts, but at all (device) interrupts. The effect is that: 1) the deferred timers/range timers get delayed less 2) the range timers cause less wakeups by themselves because the percentage of hitchhiking on existing wakeup events goes up. I've verified the working of the patch using "perf timechart", the original exposed bug is gone with this patch. Frans also reported success - the latencies are now down in the expected ~10 msec range. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Tested-by: NFrans Pop <elendil@planet.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20091008064041.67219b13@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 04 10月, 2009 1 次提交
-
-
由 Marin Mitov 提交于
Signed-off-by: NMarin Mitov <mitov@issp.bas.bg> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> LKML-Reference: <200910032045.02523.mitov@issp.bas.bg> Signed-off-by: NIngo Molnar <mingo@elte.hu> ======================================================
-
- 03 10月, 2009 1 次提交
-
-
由 Arjan van de Ven 提交于
The current bound checks for copy_from_user in the MTRR driver are not as obvious as they could be, and gcc agrees with that. This patch simplifies the boundary checks to the point that gcc can now prove to itself that the copy_from_user() is never going past its bounds. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20090926205150.30797709@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 02 10月, 2009 1 次提交
-
-
由 Ingo Molnar 提交于
Make decoding of MCEs happen only on AMD hardware by registering a non-default callback only on CPU families which support it. While looking at the interaction of decode_mce() with the other MCE code i also noticed a few other things and made the following cleanups/fixes: - Fixed the mce_decode() weak alias - a weak alias is really not good here, it should be a proper callback. A weak alias will be overriden if a piece of code is built into the kernel - not good, obviously. - The patch initializes the callback on AMD family 10h and 11h. - Added the more correct fallback printk of: No support for human readable MCE decoding on this CPU type. Transcribe the message and run it through 'mcelog --ascii' to decode. On CPUs that dont have a decoder. - Made the surrounding code more readable. Note that the callback allows us to have a default fallback - without having to check the CPU versions during the printout itself. When an EDAC module registers itself, it can install the decode-print function. (there's no unregister needed as this is core code.) version -v2 by Borislav Petkov: - add K8 to the set of supported CPUs - always build in edac_mce_amd since we use an early_initcall now - fix checkpatch warnings Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> LKML-Reference: <20091001141432.GA11410@aftab> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 01 10月, 2009 3 次提交
-
-
由 Jason Wessel 提交于
Commit c9530948 ("early_printk: Allow more than one early console") introduced a regression in the parsing of the earlyprintk= kernel arguments. If you specify "earlyprintk=serial,ttyS0,115200" as a kernel argument, the "serial,ttyS" should be parsed as a single argument and not as "serial" and then "ttyS". Also update the documentation to reflect you can specify the ttyS directly without the "serial" argument. Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Johannes Weiner <hannes@cmpxchg.org> LKML-Reference: <4ABB7D5E.6000301@windriver.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Eric Dumazet 提交于
Conditionaly compile cmpxchg8b_emu.o and EXPORT_SYMBOL(cmpxchg8b_emu). This reduces the kernel size a bit. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4AC43E7E.1000600@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arjan van de Ven 提交于
cmpxchg64() today generates, to quote Linus, "barf bag" code. cmpxchg64() is about to get used in the scheduler to fix a bug there, but it's a prerequisite that cmpxchg64() first be made non-sucking. This patch turns cmpxchg64() into an efficient implementation that uses the alternative() mechanism to just use the raw instruction on all modern systems. Note: the fallback is NOT smp safe, just like the current fallback is not SMP safe. (Interested parties with i486 based SMP systems are welcome to submit fix patches for that.) Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> [ fixed asm constraint bug ] Fixed-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20090930170754.0886ff2e@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 30 9月, 2009 1 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit 22223c9b, as requested by Andi Kleen: "Obviously kernels compiled with AMD support can still run on non AMD systems, so messages like this can never be removed at compile time." Requsted-by: NAndi Kleen <andi@firstfloor.org> Cc: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 9月, 2009 1 次提交
-
-
由 Zhao Yakui 提交于
Don't disable ARB_DISABLE when the familary ID is 0x0F. http://bugzilla.kernel.org/show_bug.cgi?id=14211 This was a 2.6.31 regression, and so this patch needs to be applied to 2.6.31.stable Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 24 9月, 2009 8 次提交
-
-
由 Alexey Dobriyan 提交于
It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jason Wessel 提交于
If you use the kernel argument: earlyprintk=serial,ttyS0,115200 This will cause a recursive hang printing the same line again and again: BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) bootconsole [earlyser0] enabled Linux version 2.6.31-07863-gb64ada6b (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009 Linux version 2.6.31-07863-gb64ada6b (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009 Linux version 2.6.31-07863-gb64ada6b (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009 Linux version 2.6.31-07863-gb64ada6b (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009 Linux version 2.6.31-07863-gb64ada6b (mingo@sirius) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #16789 SMP Wed Sep 23 21:09:43 CEST 2009 Instead warn the end user that they specified the device a second time, and ignore that second console. Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <gregkh@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4ABAAB89.1080407@windriver.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Roland Dreier 提交于
On modern systems, the kernel prints the message Skipping synchronization checks as TSC is reliable. once for every non-boot CPU. This gets kind of ridiculous on huge systems; for example, on a 64-thread system I was lucky enough to get: $ dmesg | grep 'TSC is reliable' | wc 63 567 4221 There's no point to doing this for every CPU, since the code is just checking the boot CPU anyway, so change this to a printk_once() to make the message appears only once. Signed-off-by: NRoland Dreier <rolandd@cisco.com> LKML-Reference: <adazl8l2swc.fsf@cisco.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alexey Dobriyan 提交于
* remove asm/atomic.h inclusion from linux/utsname.h -- not needed after kref conversion * remove linux/utsname.h inclusion from files which do not need it NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however due to some personality stuff it _is_ needed -- cowardly leave ELF-related headers and files alone. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
Makes code futureproof against the impending change to mm->cpu_vm_mask (to be a pointer). It's also a chance to use the new cpumask_ ops which take a pointer (the older ones are deprecated, but there's no hurry for arch code). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Rusty Russell 提交于
This snuck in after the patch which removed all the others. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu>
-
由 Li Zefan 提交于
Remove open-coded zalloc_cpumask_var() and zalloc_cpumask_var_node(). Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
由 Ingo Molnar 提交于
Use rdmsrl_safe() when accessing MCE registers. While in theory we always 'know' which ones are safe to access from the capability bits, there's a lot of hardware variations and reality might differ from theory, as it did in this case: http://bugzilla.kernel.org/show_bug.cgi?id=14204 [ 0.010016] mce: CPU supports 5 MCE banks [ 0.011029] general protection fault: 0000 [#1] [ 0.011998] last sysfs file: [ 0.011998] Modules linked in: [ 0.011998] [ 0.011998] Pid: 0, comm: swapper Not tainted (2.6.31_router #1) HP Vectra [ 0.011998] EIP: 0060:[<c100d9b9>] EFLAGS: 00010246 CPU: 0 [ 0.011998] EIP is at mce_rdmsrl+0x19/0x60 [ 0.011998] EAX: 00000000 EBX: 00000001 ECX: 00000407 EDX: 08000000 [ 0.011998] ESI: 00000000 EDI: 8c000000 EBP: 00000405 ESP: c17d5eac So WARN_ONCE() instead of crashing the box. ( also fix a number of stylistic inconsistencies in the code. ) Note, we might still crash in wrmsrl() if we get that far, but we shouldnt if the registers are truly inaccessible. Reported-by: NGNUtoo <GNUtoo@no-log.org> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> LKML-Reference: <bug-14204-5438@http.bugzilla.kernel.org/> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 23 9月, 2009 7 次提交
-
-
由 Jason Wessel 提交于
It is desirable to be able to use one early boot device to debug another or to have multiple places you can see the early boot diagnostics, such as the vga screen or serial device. This patch changes the early_printk console device registration to allow more than one early printk device to get registered via register_console(). Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jason Wessel 提交于
Move the dbgp early printk driver in advance of refactoring and adding new code, so the changes to this code are tracked separately from the move of the code. The drivers/usb/early directory will be the location of the current and future early usb code for driving usb devices prior initializing the standard interrupt driven USB drivers. Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Peter Zijlstra 提交于
Chris Malley reported that 'perf sched record' sometimes crashes his box with: [ 389.272175] BUG: unable to handle kernel paging request at ffffb300 [ 389.272294] IP: [<c011b0bd>] default_send_IPI_self+0x1d/0x50 [ 389.272366] *pde = 0073f067 *pte = 00000000 [ 389.274708] Call Trace: [ 389.274752] [<c010e3b4>] ? set_perf_event_pending+0x14/0x20 [ 389.274801] [<c01b9751>] ? perf_output_unlock+0x121/0x1a0 [ 389.274848] [<c01b981a>] ? perf_output_end+0x4a/0x70 [ 389.274893] [<c01ba690>] ? __perf_event_overflow+0x240/0x2f0 [ 389.274942] [<c030963e>] ? atomic64_cmpxchg+0x1e/0x30 [ 389.274988] [<c01ba8f4>] ? perf_swevent_ctx_event+0x1b4/0x1c0 [ 389.275035] [<c01ba773>] ? perf_swevent_ctx_event+0x33/0x1c0 [ 389.275081] [<c01ba9a7>] ? do_perf_sw_event+0xa7/0x160 [ 389.275127] [<c01baae2>] ? perf_tp_event+0x82/0xa0 [ 389.275174] [<c012e9c6>] ? ftrace_profile_sched_stat_runtime+0xe6/0x120 [ 389.275224] [<c012e8e0>] ? ftrace_profile_sched_stat_runtime+0x0/0x120 [ 389.275273] [<c013c85a>] ? update_curr+0x18a/0x230 [ 389.275318] [<c013cdc5>] ? put_prev_task_fair+0x155/0x160 [ 389.275366] [<c01618b5>] ? sched_clock_cpu+0xd5/0x110 [ 389.275413] [<c04e7525>] ? _spin_lock_irq+0x45/0x50 [ 389.275458] [<c04e424e>] ? schedule+0x20e/0xb10 The problem is that the box has no lapic enabled: [ 0.042445] Local APIC not detected. Using dummy APIC emulation. The below seems like the best fix. We disabled all lapic bits, except the self-IPI-resend logic. Reported-by: NChris Malley <mail@chrismalley.co.uk> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <7863dc4c0909221409v7893bfd3o4b590d5951a233ba@mail.gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Roland McGrath 提交于
The 32-bit ptrace syscall on a 64-bit kernel (32-bit debugger on 32-bit task) behaves differently than a native 32-bit kernel. When setting a register state of orig_eax>=0 and eax=-ERESTART* when the debugged task is NOT on its way out of a 32-bit syscall, the task will fail to do the syscall restart logic that it should do. Test case available at http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/erestartsys-trap.c?cvsroot=systemtap This happens because the 32-bit ptrace syscall sets eax=0xffffffff when it sets orig_eax>=0. The resuming task will not sign-extend this for the -ERESTART* check because TS_COMPAT is not set. (So the task thinks it is restarting after a 64-bit syscall, not a 32-bit one.) The fix is to have 32-bit ptrace calls set TS_COMPAT when setting orig_eax>=0. This ensures that the 32-bit syscall restart logic will apply when the child resumes. Signed-off-by: NRoland McGrath <roland@redhat.com>
-
由 Roland McGrath 提交于
The high 32 bits of orig_ax will be ignored when it matters, so don't fiddle them when setting it. Signed-off-by: NRoland McGrath <roland@redhat.com>
-
由 Roland McGrath 提交于
If TIF_SYSCALL_TRACE or TIF_SINGLESTEP is set while inside a syscall, the path back to user mode should get to syscall_trace_leave. This does happen in most circumstances. The exception to this is on the 64-bit syscall fastpath, when no such flag was set on syscall entry and nothing else has punted it off the fastpath for exit. That one exit fastpath fails to check for _TIF_WORK_SYSCALL_EXIT flags. This makes the behavior inconsistent with what 32-bit tasks see and what the native 32-bit kernel always does, and what 64-bit tasks see in all cases where the iret path is taken anyhow. Perhaps the only example that is affected is a ptrace stop inside do_fork (for PTRACE_O_TRACE{CLONE,FORK,VFORK,VFORKDONE}). Other syscalls with internal ptrace stop points (execve) already take the iret exit path for unrelated reasons. Test cases for both PTRACE_SYSCALL and PTRACE_SINGLESTEP variants are at: http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/syscall-from-clone.c?cvsroot=systemtap http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/step-from-clone.c?cvsroot=systemtap There was no special benefit to the sysret path's special path to call do_notify_resume, because it always takes the iret exit path at the end. So this change just makes the sysret exit path join the iret exit path for all the signals and ptrace cases. The fastpath still applies to the plain syscall-audit and resched cases. Signed-off-by: NRoland McGrath <roland@redhat.com> CC: Oleg Nesterov <oleg@redhat.com>
-
由 Huang Ying 提交于
Current raise_local() uses a struct mce that comes from mce_write() as a parameter instead of the real inject-msg, so when we set mce.finished = 0 to clear injected MCE, the real inject stays valid. This will cause the remaining inject-msg affect the next injection, which is not desired. To fix this, real inject-msg is used in raise_local instead of the one on the stack. This patch is based on the diagnosis and the fixes by Dean Nelson. Reported-by: NDean Nelson <dnelson@redhat.com> Signed-off-by: NHuang Ying <ying.huang@intel.com> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Andi Kleen <ak@linux.intel.com> LKML-Reference: <1253601357.15717.757.camel@yhuang-dev.sh.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 9月, 2009 4 次提交
-
-
由 Ingo Molnar 提交于
If a system switches back and forth between hot and cold mode, the MCE code will print a stream of critical kernel messages. Extend the throttling code to properly notice this, by only printing the first hot + cold transition and omitting the rest up to CHECK_INTERVAL (5 minutes). This way we'll only get a single incident of: [ 102.356584] CPU0: Temperature above threshold, cpu clock throttled (total events = 1) [ 102.357000] Disabling lock debugging due to kernel taint [ 102.369223] CPU0: Temperature/speed normal Every 5 minutes. The 'total events' count tells the number of cold/hot transitions detected, should overheating occur after 5 minutes again: [ 402.357580] CPU0: Temperature above threshold, cpu clock throttled (total events = 24891) [ 402.358001] CPU0: Temperature/speed normal [ 450.704142] Machine check events logged Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Instead of a mess of three separate percpu variables, consolidate the state into a single structure. Also clean up therm_throt_process(), use cleaner and more understandable variable names and a clearer logic. This, without changing the logic, makes the code more streamlined, more readable and smaller as well: text data bss dec hex filename 1487 169 4 1660 67c therm_throt.o.before 1432 176 4 1612 64c therm_throt.o.after Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
Since alloc_bootmem() will never return inaccessible (via virtual addressing) memory anyway, using the ..._low() variant only makes sense when the physical address range of the allocated memory must fulfill further constraints, espacially since on 64-bits (or more generally in all cases where the pools the two variants allocate from are than the full available range. Probably the use in alloc_tce_table() could also be eliminated (based on code inspection of pci-calgary_64.c), but that seems too risky given I know nothing about that hardware and have no way to test it. Signed-off-by: NJan Beulich <jbeulich@novell.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Beulich 提交于
Sizing of memory allocations shouldn't depend on the number of physical pages found in a system, as that generally includes (perhaps a huge amount of) non-RAM pages. The amount of what actually is usable as storage should instead be used as a basis here. Some of the calculations (i.e. those not intending to use high memory) should likely even use (totalram_pages - totalhigh_pages). Signed-off-by: NJan Beulich <jbeulich@novell.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: Dave Airlie <airlied@linux.ie> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-