- 20 12月, 2006 3 次提交
-
-
由 Lennert Buytenhek 提交于
Deepak Saxena has agreed to hand xsc3 maintainership over to me. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
LED 3 should have been registered with the platform deviceid of 3, instead of 1 (which was used for LED 1). Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dan Williams 提交于
* use irq_chip * use handle_level_irq Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 12月, 2006 24 次提交
-
-
由 Krzysztof Helt 提交于
The patch adds ifdefs around per cpu definitions. Otherwise, if not all cpu types are selected, the kernel does not link. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
On ixp23xx, it was thought to be necessary to disable coherency to work around certain silicon errata. This turns out not to be the case -- none of the documented errata workarounds require disabling coherency, and disabling coherency does not work around any existing errata. Furthermore, all ixp23xx models do support coherency, so we should just unconditionally enable coherency for all ixp23xx. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
The struct resource 'end' field is inclusive, the iop13xx flash setup code got this wrong. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
The phys_io/io_pg_offst machine record variables were being set to bogus values, causing problems when enabling DEBUG_LL. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Add HWCAP_CRUNCH so that the dynamic linker knows whether it can use Crunch-optimised libraries or not. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix up the CONFIG_PM mixups in arch/arm/mach-s3c2410/Kconfig causing CONFIG_S3C2410_PM and CONFIG_PM_H1940 to get enabled permanently. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Move adjust_cr() into arch/arm/mm/mmu.c, and move irqflags.h to a more appropriate place in the header file. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Clean the includes in arch/arm/mach-s3c2410/s3c2440.c and arch/arm/mach-s3c2410/s3c2442.c which should have been pruned when these where split and updated. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Remove old changelog entries in arch/arm/mach-s3c2410 which should be available from the version control system. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Change the include/asm-arm/arch-s3c2410/regs-serial.h platform data to use the prorper type (upf_t) for the uart_flags. Fix all the other parts of arch/arm/mach-s3c2410 to include <linux/serial_core.h> and all other uses of the include file. mach-rx3715.c:101:18: warning: incorrect type in initializer (different base types) mach-rx3715.c:101:18: expected unsigned long [unsigned] uart_flags mach-rx3715.c:101:18: got restricted unsigned int [usertype] [force] <noident> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Remove warning from s3c2410_pm_resume() not being declared by making it static. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix the following sparse errors in arch/arm/mach-s3c2410 by fixing the include paths and making un-exported items static. s3c2410-clock.c:206:12: warning: symbol 's3c2410_baseclk_add' was not declared. Should it be static? s3c2412-clock.c:559:17: warning: symbol 'clks_src' was not declared. Should it be static? s3c2412-clock.c:622:12: warning: symbol 'clks' was not declared. Should it be static? s3c2412-clock.c:630:12: warning: symbol 's3c2412_baseclk_add' was not declared. Should it be static? Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Remove old (and non-shared) VA addresses from the mappings in arch/arm/mach-s3c2410/map.h and anywhere they are being mapped in arch/arm/mach-s3c2410 Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix sparse errors in arch/arm/mach-s3c2410/s3c2442-clock.c warning: symbol 'clk_h' shadows an earlier one warning: symbol 'clk_p' shadows an earlier one warning: symbol 'clk_upll' shadows an earlier one Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix the sparse errors in arch/arm/mach-s3c2410/s3c2440-clock.c warning: symbol 'clk_h' shadows an earlier one warning: symbol 'clk_p' shadows an earlier one warning: symbol 'clk_upll' shadows an earlier one Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix address-space conversion errors from passing addresses generated from include/asm-arm/arch-s3c2410/map.h by adding an __force argument to the `void __iomem *` for all the virtual addresses. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix address-space conversion errors from passing addresses generated from include/asm-arm/arch-s3c2410/map.h by adding an __force argument to the `void __iomem *` for all the virtual addresses. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix the copyright messages in arch/arm/mach-s3c2410 to actually have `Copyright` in the line. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix copyright notices in include/asm-arm/arch-s3c2410 to actually have `Copyright` in the line. This patch deals with all the core files. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Fix copyright notices in include/asm-arm/arch-s3c2410 to actually have `Copyright` in the line. This patch deals with all the core files. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Pavel Machek 提交于
Thanks to Al Viro, here's fix to 2.6.20-rc1-git, so that collie compiles, again. It was broken by INIT_WORK changes. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Fix pxafb compile failures when CONFIG_FB_PXA_PARAMETERS is enabled after recent structure changes. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
We need to ensure that the area size is page aligned so that remap_area_pte() doesn't increment the address past the end of the desired area. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Add: sys_unshare sys_set_robust_list sys_get_robust_list sys_splice sys_arm_sync_file_range sys_tee sys_vmsplice sys_move_pages sys_getcpu Special note about sys_arm_sync_file_range(), which is implemented as: asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags, loff_t offset, loff_t nbytes) { return sys_sync_file_range(fd, offset, nbytes, flags); } We can't export sys_sync_file_range() directly on ARM because the argument list someone picked does not fit in the available registers. Would be nice if... there was an arch maintainer review mechanism for new syscalls before they hit the kernel. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 17 12月, 2006 3 次提交
-
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] pata_via: Cable detect error [PATCH] Fix help text for CONFIG_ATA_PIIX [PATCH] initializer entry defined twice in pata_rz1000 [PATCH] ata: fix platform_device_register_simple() error check [PATCH] ahci: do not mangle saved HOST_CAP while resetting controller [PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2) [libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround) [libata] use kmap_atomic(KM_IRQ0) in SCSI simulator [PATCH] ata_piix: use piix_host_stop() in ich_pata_ops [PATCH] ata_piix: IDE mode SATA patch for Intel ICH9
-
由 Linus Torvalds 提交于
On architectures where the atomicity of the bit operations is handled by external means (ie a separate spinlock to protect concurrent accesses), just doing a direct assignment on the workqueue data field (as done by commit 4594bf15) can cause the assignment to be lost due to lack of serialization with the bitops on the same word. So we need to serialize the assignment with the locks on those architectures (notably older ARM chips, PA-RISC and sparc32). So rather than using an "unsigned long", let's use "atomic_long_t", which already has a safe assignment operation (atomic_long_set()) on such architectures. This requires that the atomic operations use the same atomicity locks as the bit operations do, but that is largely the case anyway. Sparc32 will probably need fixing. Architectures (including modern ARM with LL/SC) that implement sane atomic operations for SMP won't see any of this matter. Cc: Russell King <rmk+lkml@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: David Miller <davem@davemloft.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Linux Arch Maintainers <linux-arch@vger.kernel.org> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Doug Chapman noticed that mincore() will doa "copy_to_user()" of the result while holding the mmap semaphore for reading, which is a big no-no. While a recursive read-lock on a semaphore in the case of a page fault happens to work, we don't actually allow them due to deadlock schenarios with writers due to fairness issues. Doug and Marcel sent in a patch to fix it, but I decided to just rewrite the mess instead - not just fixing the locking problem, but making the code smaller and (imho) much easier to understand. Cc: Doug Chapman <dchapman@redhat.com> Cc: Marcel Holtmann <holtmann@redhat.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 16 12月, 2006 10 次提交
-
-
由 Alan 提交于
The UDMA66 VIA hardware has no controller side cable detect bits we can use. This patch minimally fixes the problem by reporting unknown in this case and using drive side detection. The old drivers/ide code does some additional tricks but those aren't appropriate now we are in -rc. Without this update UDMA66 via controllers run slowly. They don't fail so it's a borderline call whether this is -rc material or not. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Alan 提交于
> Thanks for clarifying Bill, and sorry Alan. ata_piix does indeed work > correctly. The help text is a bit confusing: > > config ATA_PIIX > tristate "Intel PIIX/ICH SATA support" > depends on PCI > help > This option enables support for ICH5/6/7/8 Serial ATA. > If PATA support was enabled previously, this enables > support for select Intel PIIX/ICH PATA host controllers. New help text Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ira Snyder 提交于
This removes the extra definition of the .error_handler member in the pata_rz1000 driver. Signed-off-by: NIra W. Snyder <kernel@irasnyder.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Akinobu Mita 提交于
The return value of platform_device_register_simple() should be checked by IS_ERR(). Cc: Jeff Garzik <jgarzik@pobox.com> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Do not mangle with HOST_CAP while resetting controller. The code is there for a historical reason. The mangling breaks controller feature detection and 0 PORTS_IMPL workaround code. This problem was spotted by Manoj Kasichainula. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Manoj Kasichainula <manoj@io.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
Calling sg_init_one() with NULL buf causes oops on certain configurations. Don't initialize sg in ata_exec_internal() if DMA_NONE and make the function complain if @buf is NULL when dma_dir isn't DMA_NONE. While at it, fix comment. The problem is discovered and initial patch was submitted by Arnd Bergmann. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
Current Broadcom/Serverworks SATA boards (including Apple K2 SATA) have problems with ATAPI DMA, so it is disabled. ATAPI PIO, ATA PIO, and ATA DMA continue to work just fine. Acked-by: NAnantha Subramanyam <ananth@broadcom.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jeff Garzik 提交于
We are inside spin_lock_irqsave(). quoth akpm's debug facility: [ 231.948000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 232.232000] ata1.00: configured for UDMA/33 [ 232.404000] WARNING (1) at arch/i386/mm/highmem.c:47 kmap_atomic() [ 232.404000] [<c01162e6>] kmap_atomic+0xa9/0x1ab [ 232.404000] [<c0242c81>] ata_scsi_rbuf_get+0x1c/0x30 [ 232.404000] [<c0242caf>] ata_scsi_rbuf_fill+0x1a/0x87 [ 232.404000] [<c0243ab2>] ata_scsiop_mode_sense+0x0/0x309 [ 232.404000] [<c01729d5>] end_bio_bh_io_sync+0x0/0x37 [ 232.404000] [<c02311c6>] scsi_done+0x0/0x16 [ 232.404000] [<c02311c6>] scsi_done+0x0/0x16 [ 232.404000] [<c0242dcc>] ata_scsi_simulate+0xb0/0x13f [...] Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
piix_init_one() allocates host private data which should be freed by piix_host_stop(). ich_pata_ops wasn't converted to piix_host_stop() while merging, leaking 4 bytes on driver detach. Fix it. This was spotted using Kmemleak by Catalin Marinas. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Catalin Marinas <catalin.marinas@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jason Gaston 提交于
This updated patch adds the Intel ICH9 IDE mode SATA controller DID's. Signed-off-by: NJason Gaston <jason.d.gaston@intel.com> Acked-by: NTejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-