Introduced by qxl, add these properties as a generic way to tell a
display manager about the GUI layout.

Also add the hotplug_mode_update_property which advises display managers to
reread the mode list on a hotplug event.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

Just like for screen objects, make sure we use only a single framebuffer
for implicit placement.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

Preparation for supporting explicit fbs for screen objects and screen
targets.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

Gnome-Shell / Wayland assumes that page-flips can be done on a crtc
regardless of framebuffer size and the crtc position within the
framebuffer.

Therefore rework the screen target code to correctly handle changes in
framebuffer size and content_fb_type. Also make sure that we update
the screen target correctly when the content_fb_type is not
SAME_AS_DISPLAY.

This commit breaks out the framebuffer binding code from crtc_set so it
can be used both from page_flip() and crtc_set() and reworks those
functions a bit to be more robust.

v2: Address review comments by Sinclair Yeh.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

For page flips the framebuffer may be much larger than the crtc
scanout area and may be attached to multiple crtcs.
When flipping a crtc, make sure we dirty only that crtc's area of the
framebuffer.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

If there are no cliprects for a particular crtc, an invalid command would
have been generated. If that's the case, instead ditch the generated
command sequence.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

Add support for DXGenMips command.
Signed-off-by: NCharmaine Lee <charmainel@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>

- GM20x secure boot support (hence, acceleration, finally \o/)
- GM200 support
- GM20B clock driver
- Support for power sensors on some GPUs
- Various other fixes all over the place

* 'linux-4.6' of git://github.com/skeggsb/linux: (95 commits)
  drm/nouveau/clk/gm20b: add basic driver
  drm/nouveau/clk/gk20a: share reusable structures/functions
  drm/nouveau/clk/gk20a: set lowest frequency during init()
  drm/nouveau/clk/gk20a: split gk20a_clk_new()
  drm/nouveau/clk/gk20a: abstract pl_to_div
  drm/nouveau/clk/gk20a: put mnp values into their own struct
  drm/nouveau/clk/gk20a: emit parent rate as debug message
  drm/nouveau/clk/gk20a: only restore divider to 1:1 if needed
  drm/nouveau/clk/gk20a: only compute n_lo if needed
  drm/nouveau/clk/gk20a: fix VCO bit mask
  drm/nouveau/clk/gk20a: rename enable/disable functions
  drm/nouveau/clk/gk20a: reorganize variables in gk20a_pllg_calc_mnp()
  drm/nouveau/clk/gk20a: convert parameters to Khz
  drm/nouveau/volt: add GM20B driver
  drm/nouveau/volt/gk20a: split constructor
  drm/nouveau/volt/gk20a: share reusable members & functions
  drm/nouveau/ce/gm107: expose MaxwellDmaCopyA
  drm/nouveau/fifo/gm107: KeplerChannelGpfifoB, and 2048 channels
  drm/nouveau/fifo/gk110: expose KeplerChannelGpfifoB
  drm/nouveau/fifo/gk104: submit NOP after all PBDMA_INTR_0, not just DEVICE
  ...

Add a basic clock driver that reuses the GK20A logic.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Make functions/structures that the GM20B driver will reuse public.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Err on the safe side by setting the lowest frequency (and thus voltage)
during device init.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This allows to instanciate drivers that use the same logic as gk20a with
different parameters.

Add a constructor function to allow other chips that inherit from this
clock to easily initialize its members
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

pl_to_div may be done differently depending on the chip. Abstract this
operation so the same logic can be reused for them as well.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This allows us to read them using one single function and will be handy
to the GM20B driver.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Most users are probably not interested in this information.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Only restore the 1:1 divider if it is not set already. Also use the
proper masks for this operation and add a second write as done in the
Android code.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

n_lo is used if we are going to slide. Compute it only if that condition
succeeds to avoid confusion about future usage of this computation.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Fix the mask specified to switch to VCO mode was given as an (incorrect)
immediate value. Although the side-effect happens to be the same, this
is clearly incorrect.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

gk20a_pllg_disable() is only used in the context of gk20a_clk_fini().
Move its body there and rename _gk20a_pllg_enable() and
_gk20a_pllg_disable() to non-underscored versions.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Move some variables declarations to the scope where they are actually
used to make the code easier to follow.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Perform computations in Khz instead of Mhz for better precision.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Add basic GM20B volt driver that reuses the GK20A logic.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Split the constructor function so we can reuse the same logic in other
chips.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The CVB calculation and voltage setting functions can be reused for the
future chips. So move the declaration to gk20a.h.
Signed-off-by: NVince Hsu <vinceh@nvidia.com>
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The HW accepts KeplerDmaCopyA and MaxwellDmaCopyA classes.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This class supports a WFI method (0x0078) that's not present on the
KeplerChannelGpfifoA class.

The binary driver exposes both classes on these GPUs for some reason,
though there doesn't appear to be any difference in the setup that's
done for each (ie. even if you allocate GpfifoA, the WFI method will
still work).

We shall just expose GpfifoB, as I don't see a good reason to report
the presence of both.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Prevents the same interrupt from re-triggering forever.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Unlike subdevs, these aren't initialised in a defined order.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>