fail-nth interface is only created in /proc/self/task/<current-tid>/.
This change also adds it in /proc/<pid>/.

This makes shell based tool a bit simpler.

	$ bash -c "builtin echo 100 > /proc/self/fail-nth && exec ls /"

Link: http://lkml.kernel.org/r/1491490561-10485-6-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The fail-nth file is created with 0666 and the access is permitted if
and only if the task is current.

This file is owned by the currnet user.  So we can create it with 0644
and allow the owner to write it.  This enables to watch the status of
task->fail_nth from another processes.

[akinobu.mita@gmail.com: don't convert unsigned type value as signed int]
  Link: http://lkml.kernel.org/r/1492444483-9239-1-git-send-email-akinobu.mita@gmail.com
[akinobu.mita@gmail.com: avoid unwanted data race to task->fail_nth]
  Link: http://lkml.kernel.org/r/1499962492-8931-1-git-send-email-akinobu.mita@gmail.com
Link: http://lkml.kernel.org/r/1491490561-10485-5-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The read interface for fail-nth looks a bit odd.  Read from this file
returns "NYYYY..." or "YYYYY..." (this makes me surprise when cat this
file).  Because there is no EOF condition.  The first character
indicates current->fail_nth is zero or not, and then current->fail_nth
is reset to zero.

Just returning task->fail_nth value is more natural to understand.

Link: http://lkml.kernel.org/r/1491490561-10485-4-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The value written to fail-nth file is parsed as 0-based.  Parsing as
one-based is more natural to understand and it enables to cancel the
previous setup by simply writing '0'.

This change also converts task->fail_nth from signed to unsigned int.

Link: http://lkml.kernel.org/r/1491490561-10485-3-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Automatically detect the number base to use when writing to fail-nth
file instead of always parsing as a decimal number.

Link: http://lkml.kernel.org/r/1491490561-10485-2-git-send-email-akinobu.mita@gmail.comSigned-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We developed RENAME_EXCHANGE and UBIFS_FLG_DOUBLE_HASH more or less in
parallel and this case was forgotten. :-(

Cc: stable@vger.kernel.org
Fixes: d63d61c1 ("ubifs: Implement UBIFS_FLG_DOUBLE_HASH")
Signed-off-by: NRichard Weinberger <richard@nod.at>

The inode is not locked in init_xattrs when creating a new inode.

Without this patch, there will occurs assert when booting or creating
a new file, if the kernel config CONFIG_SECURITY_SMACK is enabled.

Log likes:

UBIFS assert failed in ubifs_xattr_set at 298 (pid 1156)
CPU: 1 PID: 1156 Comm: ldconfig Tainted: G S 4.12.0-rc1-207440-g1e70b02 #2
Hardware name: MediaTek MT2712 evaluation board (DT)
Call trace:
[<ffff000008088538>] dump_backtrace+0x0/0x238
[<ffff000008088834>] show_stack+0x14/0x20
[<ffff0000083d98d4>] dump_stack+0x9c/0xc0
[<ffff00000835d524>] ubifs_xattr_set+0x374/0x5e0
[<ffff00000835d7ec>] init_xattrs+0x5c/0xb8
[<ffff000008385788>] security_inode_init_security+0x110/0x190
[<ffff00000835e058>] ubifs_init_security+0x30/0x68
[<ffff00000833ada0>] ubifs_mkdir+0x100/0x200
[<ffff00000820669c>] vfs_mkdir+0x11c/0x1b8
[<ffff00000820b73c>] SyS_mkdirat+0x74/0xd0
[<ffff000008082f8c>] __sys_trace_return+0x0/0x4
Signed-off-by: NXiaolei Li <xiaolei.li@mediatek.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

When UBIFS prepares data structures which will be written to the MTD it
ensues that their lengths are multiple of 8. Since it uses kmalloc() the
padded bytes are left uninitialized and we leak a few bytes of kernel
memory to the MTD.
To make sure that all bytes are initialized, let's switch to kzalloc().
Kzalloc() is fine in this case because the buffers are not huge and in
the IO path the performance bottleneck is anyway the MTD.

Cc: stable@vger.kernel.org
Fixes: 1e51764a ("UBIFS: add new flash file system")
Signed-off-by: NRichard Weinberger <richard@nod.at>
Reviewed-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

In low memory situations, page allocations for bulk read
can kill applications for reclaiming memory, and print an
failure message when allocations are failed.
Because bulk read is just an optimization, we don't have
to do these and can stop page allocations.

Though this siutation happens rarely, add __GFP_NORETRY
to prevent from excessive memory reclaim and killing
applications, and __GFP_WARN to suppress this failure
message.

For this, Use readahead_gfp_mask for gfp flags when
allocating pages.
Signed-off-by: NHyunchul Lee <cheol.lee@lge.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

When remounting with the no_bulk_read option,
there is a problem accessing the "bulk_read buffer(bu.buf)"
which has already been freed.

If the bulk_read option is enabled,
ubifs_tnc_bulk_read uses the pre-allocated bu.buf.

While bu.buf is being used by ubifs_tnc_bulk_read,
remounting with no_bulk_read frees bu.buf.

So I added code to check the use of "bu.buf" to avoid this situation.

------
I tested as follows(kernel v3.18) :

Use the script to repeat "no_bulk_read <-> bulk_read"
	remount.sh
	#!/bin/sh
	while true do;
		mount -o remount,no_bulk_read ${MOUNT_POINT};
		sleep 1;
		mount -o remount,bulk_read ${MOUNT_POINT};
		sleep 1;
	done

Perform read operation
	cat ${MOUNT_POINT}/* > /dev/null

The problem is reproduced immediately.

[  234.256845][kernel.0]Internal error: Oops: 17 [#1] PREEMPT ARM
[  234.258557][kernel.0]CPU: 0 PID: 2752 Comm: cat Tainted: G        W  O   3.18.31+ #51
[  234.259531][kernel.0]task: cbff8580 ti: cbd66000 task.ti: cbd66000
[  234.260306][kernel.0]PC is at validate_data_node+0x10/0x264
[  234.260994][kernel.0]LR is at ubifs_tnc_bulk_read+0x388/0x3ec
[  234.261712][kernel.0]pc : [<c01d98fc>]    lr : [<c01dc300>]    psr: 80000013
[  234.261712][kernel.0]sp : cbd67ba0  ip : 00000001  fp : 00000000
[  234.263337][kernel.0]r10: cd3e0260  r9 : c0df2008  r8 : 00000000
[  234.264087][kernel.0]r7 : cd3e0000  r6 : 00000000  r5 : cd3e0278  r4 : cd3e0000
[  234.264999][kernel.0]r3 : 00000003  r2 : cd3e0280  r1 : 00000000  r0 : cd3e0000
[  234.265910][kernel.0]Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
[  234.266896][kernel.0]Control: 10c53c7d  Table: 8c40c059  DAC: 00000015
[  234.267711][kernel.0]Process cat (pid: 2752, stack limit = 0xcbd66400)
[  234.268525][kernel.0]Stack: (0xcbd67ba0 to 0xcbd68000)
[  234.269169][kernel.0]7ba0: cd7c3940 c03d8650 0001bfe0 00002ab2 00000000 cbd67c5c cbd67c58 0001bfe0
[  234.270287][kernel.0]7bc0: cd3e0000 00002ab2 0001bfe0 00000014 cbd66000 cd3e0260 00000000 c01d6660
[  234.271403][kernel.0]7be0: 00002ab2 00000000 c82a5800 ffffffff cd3e0298 cd3e0278 00000000 cd3e0000
[  234.272520][kernel.0]7c00: 00000000 00000000 cd3e0260 c01dc300 00002ab2 00000000 60000013 d663affa
[  234.273639][kernel.0]7c20: cd3e01f0 cd3e01f0 60000013 c09397ec 00000000 cd3e0278 00002ab2 00000000
[  234.274755][kernel.0]7c40: cd3e0000 c01dbf48 00000014 00000003 00000160 00000015 00000004 d663affa
[  234.275874][kernel.0]7c60: ccdaa978 cd3e0278 cd3e0000 cf32a5f4 ccdaa820 00000044 cbd66000 cd3e0260
[  234.276992][kernel.0]7c80: 00000003 c01cec84 ccdaa8dc cbd67cc4 cbd67ec0 00000010 ccdaa978 00000000
[  234.278108][kernel.0]7ca0: 0000015e ccdaa8dc 00000000 00000000 cf32a5d0 00000000 0000015f ccdaa8dc
[  234.279228][kernel.0]7cc0: 00000000 c8488300 0009e5a4 0000000e cbd66000 0000015e cf32a5f4 c0113c04
[  234.280346][kernel.0]7ce0: 0000009f 0000003c c00098c4 ffffffff 00001000 00000000 000000ad 00000010
[  234.281463][kernel.0]7d00: 00000038 cd68f580 00000150 c8488360 00000000 cbd67d30 cbd67d70 0000000e
[  234.282579][kernel.0]7d20: 00000010 00000000 c0951874 c0112a9c cf379b60 cf379b84 cf379890 cf3798b4
[  234.283699][kernel.0]7d40: cf379578 cf37959c cf379380 cf3793a4 cf3790b0 cf3790d4 cf378fd8 cf378ffc
[  234.284814][kernel.0]7d60: cf378f48 cf378f6c cf32a5f4 cf32a5d0 00000000 00001000 00000018 00000000
[  234.285932][kernel.0]7d80: 00001000 c0050da4 00000000 00001000 cec04c00 00000000 00001000 c0e11328
[  234.287049][kernel.0]7da0: 00000000 00001000 cbd66000 00000000 00001000 c0012a60 00000000 00001000
[  234.288166][kernel.0]7dc0: cbd67dd4 00000000 00001000 80000013 00000000 00001000 cd68f580 00000000
[  234.289285][kernel.0]7de0: 00001000 c915d600 00000000 00001000 cbd67e48 00000000 00001000 00000018
[  234.290402][kernel.0]7e00: 00000000 00001000 00000000 00000000 00001000 c915d768 c915d768 c0113550
[  234.291522][kernel.0]7e20: cd68f580 cbd67e48 cd68f580 cb6713c0 00010000 000ac5a4 00000000 001fc5a4
[  234.292637][kernel.0]7e40: 00000000 c8488300 cbd67ec0 00eb0000 cd68f580 c0113ee4 00000000 cbd67ec0
[  234.293754][kernel.0]7e60: cd68f580 c8488300 cbd67ec0 00eb0000 cd68f580 00150000 c8488300 00eb0000
[  234.294874][kernel.0]7e80: 00010000 c0112fd0 00000000 cbd67ec0 cd68f580 00150000 00000000 cd68f580
[  234.295991][kernel.0]7ea0: cbd67ef0 c011308c 00000000 00000002 cd768850 00010000 00000000 c01133fc
[  234.297110][kernel.0]7ec0: 00150000 00000000 cbd67f50 00000000 00000000 cb6713c0 01000000 cbd67f48
[  234.298226][kernel.0]7ee0: cbd67f50 c8488300 00000000 c0113204 00010000 01000000 00000000 cb6713c0
[  234.299342][kernel.0]7f00: 00150000 00000000 cbd67f50 00000000 00000000 00000000 00000000 00000000
[  234.300462][kernel.0]7f20: cbd67f50 01000000 01000000 cb6713c0 c8488300 c00ebba8 01000000 00000000
[  234.301577][kernel.0]7f40: c8488300 cb6713c0 00000000 00000000 00000000 00000000 ccdaa820 00000000
[  234.302697][kernel.0]7f60: 00000000 01000000 00000003 00000001 cbd66000 00000000 00000001 c00ec678
[  234.303813][kernel.0]7f80: 00000000 00000200 00000000 01000000 01000000 00000000 00000000 000000ef
[  234.304933][kernel.0]7fa0: c000e904 c000e780 01000000 00000000 00000001 00000003 00000000 01000000
[  234.306049][kernel.0]7fc0: 01000000 00000000 00000000 000000ef 00000001 00000003 01000000 00000001
[  234.307165][kernel.0]7fe0: 00000000 beafb78c 0000ad08 00128d1c 60000010 00000001 00000000 00000000
[  234.308292][kernel.0][<c01d98fc>] (validate_data_node) from [<c01dc300>] (ubifs_tnc_bulk_read+0x388/0x3ec)
[  234.309493][kernel.0][<c01dc300>] (ubifs_tnc_bulk_read) from [<c01cec84>] (ubifs_readpage+0x1dc/0x46c)
[  234.310656][kernel.0][<c01cec84>] (ubifs_readpage) from [<c0113c04>] (__generic_file_splice_read+0x29c/0x4cc)
[  234.311890][kernel.0][<c0113c04>] (__generic_file_splice_read) from [<c0113ee4>] (generic_file_splice_read+0xb0/0xf4)
[  234.313214][kernel.0][<c0113ee4>] (generic_file_splice_read) from [<c0112fd0>] (do_splice_to+0x68/0x7c)
[  234.314386][kernel.0][<c0112fd0>] (do_splice_to) from [<c011308c>] (splice_direct_to_actor+0xa8/0x190)
[  234.315544][kernel.0][<c011308c>] (splice_direct_to_actor) from [<c0113204>] (do_splice_direct+0x90/0xb8)
[  234.316741][kernel.0][<c0113204>] (do_splice_direct) from [<c00ebba8>] (do_sendfile+0x17c/0x2b8)
[  234.317838][kernel.0][<c00ebba8>] (do_sendfile) from [<c00ec678>] (SyS_sendfile64+0xc4/0xcc)
[  234.318890][kernel.0][<c00ec678>] (SyS_sendfile64) from [<c000e780>] (ret_fast_syscall+0x0/0x38)
[  234.319983][kernel.0]Code: e92d47f0 e24dd050 e59f9228 e1a04000 (e5d18014)
Signed-off-by: Nkaram.lee <karam.lee@lge.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

A reference to LEB 0 or with length 0 in the TNC
is never correct and could be caused by a memory corruption.
Don't write such a bad index node to the MTD.
Instead fail the commit which will turn UBIFS into read-only mode.

This is less painful than having the bad reference on the MTD
from where UBFIS has no chance to recover.
Signed-off-by: NRichard Weinberger <richard@nod.at>

There currently appears to be no way for userspace to find out the
underlying volume number for a mounted ubifs file system, since ubifs
uses anonymous block devices.  The volume name is present in
/proc/mounts but UBI volumes can be renamed after the volume has been
mounted.

To remedy this, show the UBI number and UBI volume number as part of the
options visible under /proc/mounts.

Also, accept and ignore the ubi= vol= options if they are used mounting
(patch from Richard Weinberger).

 # mount -t ubifs ubi:baz x
 # mount
 ubi:baz on /root/x type ubifs (rw,relatime,ubi=0,vol=2)
 # ubirename /dev/ubi0 baz bazz
 # mount
 ubi:baz on /root/x type ubifs (rw,relatime,ubi=0,vol=2)
 # ubinfo -d 0 -n 2
 Volume ID:   2 (on ubi0)
 Type:        dynamic
 Alignment:   1
 Size:        67 LEBs (1063424 bytes, 1.0 MiB)
 State:       OK
 Name:        bazz
 Character device major/minor: 254:3
Signed-off-by: NRabin Vincent <rabinv@axis.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

statx() can report what flags a file has, expose flags that UBIFS
supports. Especially STATX_ATTR_COMPRESSED and STATX_ATTR_ENCRYPTED
can be interesting for userspace.
Signed-off-by: NRichard Weinberger <richard@nod.at>

We check the length already, no need to check later
again for an empty string.
Signed-off-by: NRichard Weinberger <richard@nod.at>

If file names are encrypted we can no longer print them.
That's why we have to change these prints or remove them completely.
Signed-off-by: NRichard Weinberger <richard@nod.at>

...to make sure that we don't use it for double hashed lookups
instead of dent_key_init_hash().
Signed-off-by: NRichard Weinberger <richard@nod.at>

When removing an encrypted file with a long name and without having
the key we have to be able to locate and remove the directory entry
via a double hash. This corner case was simply forgotten.

Fixes: 528e3d17 ("ubifs: Add full hash lookup support")
Reported-by: NDavid Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Currently, the function truncate_data_node only updates the
destination data node size if compression is used. For
uncompressed nodes, the old length is incorrectly retained.

This patch makes sure that the length is correctly set when
compression is disabled.

Fixes: 7799953b ("ubifs: Implement encrypt/decrypt for all IO")
Signed-off-by: NDavid Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: NRichard Weinberger <richard@nod.at>

When a new inode is created, we check if the containing folder has a encryption
policy set and inherit that. This should however only be done for regular
files, links and subdirectories. Not for sockes fifos etc.

Fixes: d475a507 ("ubifs: Add skeleton for fscrypto")
Cc: stable@vger.kernel.org
Signed-off-by: NDavid Gstir <david@sigma-star.at>
Signed-off-by: NRichard Weinberger <richard@nod.at>

in RENAME_WHITEOUT error path, fscrypt_name should be freed.
Signed-off-by: NHyunchul Lee <cheol.lee@lge.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

Assign inode data budget to budget request correctly.
Signed-off-by: NHyunchul Lee <cheol.lee@lge.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

UBIFS handles extended attributes just like files, as consequence of
that, they also have inodes.
Therefore UBIFS does all the inode machinery also for xattrs. Since new
inodes have i_nlink of 1, a file or xattr inode will be evicted
if i_nlink goes down to 0 after an unlink. UBIFS assumes this model also
for xattrs, which is not correct.
One can create a file "foo" with xattr "user.test". By reading
"user.test" an inode will be created, and by deleting "user.test" it
will get evicted later. The assumption breaks if the file "foo", which
hosts the xattrs, will be removed. VFS nor UBIFS does not remove each
xattr via ubifs_xattr_remove(), it just removes the host inode from
the TNC and all underlying xattr nodes too and the inode will remain
in the cache and wastes memory.

To solve this problem, remove xattr inodes from the VFS inode cache in
ubifs_xattr_remove() to make sure that they get evicted.

Fixes: 1e51764a ("UBIFS: add new flash file system")
Cc: <stable@vger.kernel.org>
Signed-off-by: NRichard Weinberger <richard@nod.at>

This SLAB is only being used in super.c, there is no need to expose
it into the global namespace.
Signed-off-by: NRichard Weinberger <richard@nod.at>

With blk_status_t conversion (that are now present in master),
bio_readpage_error() may return 1 as now ->submit_bio_hook() may not set
%ret if it runs without problems.

This fixes that unexpected return value by changing
btrfs_check_repairable() to return a bool instead of updating %ret, and
patch is applicable to both codebases with and without blk_status_t.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

As the function uses the non-failing bio allocation, we can remove error
handling from the callers as well.
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We've started using cloned bios more in 4.13, there are some specifics
regarding the iteration.  Filipe found [1] that the raid56 iterated a
cloned bio using bio_for_each_segment_all, which is incorrect. The
cloned bios have wrong bi_vcnt and this could lead to silent
corruptions.  This patch adds assertions to all remaining
bio_for_each_segment_all cases.

[1] https://patchwork.kernel.org/patch/9838535/Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

In the iomap implementations of SEEK_HOLE and SEEK_DATA, make sure we
return -ENXIO for negative offsets.
Inspired-by: NMateusz S <muttdini@gmail.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

This reverts commit 50e0bdbe.

The new XFS_QMOPT_NOLOCK isn't used at all, and conditional locking based
on a flag is always the wrong thing to do - we should be having helpers
that can be called without the lock instead.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

The comment mentioned the wrong lock.  Also add an ASSERT to assert
this locking precondition.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>

"perf lock" shows fairly heavy contention for the bit waitqueue locks
when doing an I/O heavy workload.
Use a bit to tell whether or not there has been contention for a lock
so that we can optimise away the bit waitqueue options in those cases.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

This support for opening files on NFS by file handle, both through the
open_by_handle syscall, and for re-exporting NFS (for example using a
different version).  The support is very basic for now, as each open by
handle will have to do an NFSv4 open operation on the wire.  In the
future this will hopefully be mitigated by an open file cache, as well
as various optimizations in NFS for this specific case.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
[hch: incorporated various changes, resplit the patches, new changelog]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

This will be needed in order to implement the get_parent export op
for nfsd.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

This helper will allow to find an existing NFS inode by the file handle
and fattr.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
[hch: split from a larger patch]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

It's a trival change but follows knfsd export document that asks
for d_splice_alias during lookup.
Signed-off-by: NPeng Tao <tao.peng@primarydata.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Return size of COPY is u64 but it was assigned to an "int" status.
Signed-off-by: NOlga Kornievskaia <kolga@netapp.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Transparent State Migration copies a client's lease state from the
server where a filesystem used to reside to the server where it now
resides. When an NFSv4.1 client first contacts that destination
server, it uses EXCHANGE_ID to detect trunking relationships.

The lease that was copied there is returned to that client, but the
destination server sets EXCHGID4_FLAG_CONFIRMED_R when replying to
the client. This is because the lease was confirmed on the source
server (before it was copied).

When CONFIRMED_R is set, the client throws away the sequence ID
returned by the server. During a Transparent State Migration, however
there's no other way for the client to know what sequence ID to use
with a lease that's been migrated.

Therefore, the client must save and use the contrived slot sequence
value returned by the destination server even when CONFIRMED_R is
set.

Note that some servers always return a seqid of 1 after a migration.
Reported-by: NXuan Qi <xuan.qi@oracle.com>
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NXuan Qi <xuan.qi@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Transparent State Migration copies a client's lease state from the
server where a filesystem used to reside to the server where it now
resides. When an NFSv4.1 client first contacts that destination
server, it uses EXCHANGE_ID to detect trunking relationships.

The lease that was copied there is returned to that client, but the
destination server sets EXCHGID4_FLAG_CONFIRMED_R when replying to
the client. This is because the lease was confirmed on the source
server (before it was copied).

Normally, when CONFIRMED_R is set, a client purges the lease and
creates a new one. However, that throws away the entire benefit of
Transparent State Migration.

Therefore, the client must not purge that lease when it is possible
that Transparent State Migration has occurred.
Reported-by: NXuan Qi <xuan.qi@oracle.com>
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NXuan Qi <xuan.qi@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

If an NFS server returns a filehandle that we have previously
seen, and reports a different type, then nfs_refresh_inode()
will log a warning and return an error.

nfs_fhget() does not check for this error and may return an
inode with a different type than the one that the server
reported.

This is likely to cause confusion, and is one way that
->open_context() could return a directory inode as discussed
in the previous patch.

So if nfs_refresh_inode() returns and error, return that error
from nfs_fhget() to avoid the confusion propagating.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>