Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 22 1月, 2015 21 次提交
  3. 21 1月, 2015 5 次提交
    • B
      drm: add Atmel HLCDC Display Controller support · 1a396789
      由 Boris Brezillon 提交于 
      The Atmel HLCDC (HLCD Controller) IP available on some Atmel SoCs (i.e.
at91sam9n12, at91sam9x5 family or sama5d3 family) provides a display
controller device.

This display controller supports at least one primary plane and might
provide several overlays and an hardware cursor depending on the IP
version.

At the moment, this driver only implements an RGB connector to interface
with LCD panels, but support for other kind of external devices might be
added later.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: NRob Clark <robdclark@gmail.com>
Tested-by: NAnthony Harivel <anthony.harivel@emtrion.de>
Tested-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
      1a396789
    • B
      drm: panel: simple-panel: add bus format information for foxlink panel · bb276cb3
      由 Boris Brezillon 提交于 
      Foxlink's fl500wvr00-a0t supports RGB888 format.
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NThierry Reding <treding@nvidia.com>
      bb276cb3
    • B
      drm: panel: simple-panel: add support for bus_format retrieval · 795f7ab3
      由 Boris Brezillon 提交于 
      Provide a way to specify panel requirement in terms of supported media bus
format (particularly useful for panels connected to an RGB or LVDS bus).
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NThierry Reding <treding@nvidia.com>
      795f7ab3
    • B
      drm: add bus_formats and num_bus_formats fields to drm_display_info · b5571e9d
      由 Boris Brezillon 提交于 
      Add bus_formats and num_bus_formats fields and
drm_display_info_set_bus_formats helper function to specify the bus
formats supported by a given display.

This information can be used by display controller drivers to configure
the output interface appropriately (i.e. RGB565, RGB666 or RGB888 on raw
RGB or LVDS busses).
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Acked-by: NThierry Reding <treding@nvidia.com>
      b5571e9d
    • R
      drm: fb helper should avoid sleeping in panic context · 9aa609e1
      由 Rui Wang 提交于 
      There are still some places in the fb helper that need to avoid
sleeping in panic context. Here's an example:

[   65.615496] bad: scheduling from the idle thread!
[   65.620747] CPU: 92 PID: 0 Comm: swapper/92 Tainted: G   M        E  3.18.0-rc4-7-default+ #20

[   65.630364] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS
BRHSXSD1.86B.0056.R01.1409242327 09/24/2014
[   65.641923]  ffff88087f693d80 ffff88087f689878 ffffffff81566db9 0000000000000000
[   65.650226]  ffff88087f693d80 ffff88087f689898 ffffffff810871ff ffff88046eb3e0d0
[   65.658527]  ffff88087f693d80 ffff88087f6898c8 ffffffff8107c1fa 000000017f6898b8
[   65.666830] Call Trace:
[   65.669557]  <#MC>  [<ffffffff81566db9>] dump_stack+0x46/0x58
[   65.675994]  [<ffffffff810871ff>] dequeue_task_idle+0x2f/0x40
[   65.682412]  [<ffffffff8107c1fa>] dequeue_task+0x5a/0x80
[   65.688345]  [<ffffffff810804f3>] deactivate_task+0x23/0x30
[   65.694569]  [<ffffffff81569050>] __schedule+0x580/0x7f0
[   65.700502]  [<ffffffff81569739>] schedule_preempt_disabled+0x29/0x70
[   65.707696]  [<ffffffff8156abb6>] __ww_mutex_lock_slowpath+0xb8/0x162
[   65.714891]  [<ffffffff8156acb3>] __ww_mutex_lock+0x53/0x85
[   65.721125]  [<ffffffffa00b3a5d>] drm_modeset_lock+0x3d/0x110 [drm]
[   65.728132]  [<ffffffffa00b3c2a>] __drm_modeset_lock_all+0x8a/0x120 [drm]
[   65.735721]  [<ffffffffa00b3cd0>] drm_modeset_lock_all+0x10/0x30 [drm]
[   65.743015]  [<ffffffffa01af8bf>] drm_fb_helper_pan_display+0x2f/0xf0 [drm_kms_helper]
[   65.751857]  [<ffffffff8132bd21>] fb_pan_display+0xd1/0x1a0
[   65.758081]  [<ffffffff81326010>] bit_update_start+0x20/0x50
[   65.764400]  [<ffffffff813259f2>] fbcon_switch+0x3a2/0x550
[   65.770528]  [<ffffffff813a01c9>] redraw_screen+0x189/0x240
[   65.776750]  [<ffffffff81322f8a>] fbcon_blank+0x20a/0x2d0
[   65.782778]  [<ffffffff8137d359>] ? erst_writer+0x209/0x330
[   65.789002]  [<ffffffff810ba2f3>] ? internal_add_timer+0x63/0x80
[   65.795710]  [<ffffffff810bc137>] ? mod_timer+0x127/0x1e0
[   65.801740]  [<ffffffff813a0cd8>] do_unblank_screen+0xa8/0x1d0
[   65.808255]  [<ffffffff813a0e10>] unblank_screen+0x10/0x20
[   65.814381]  [<ffffffff812ca0d9>] bust_spinlocks+0x19/0x40
[   65.820508]  [<ffffffff81561ca7>] panic+0x106/0x1f5
[   65.825955]  [<ffffffff8102336c>] mce_panic+0x2ac/0x2e0
[   65.831789]  [<ffffffff812c796a>] ? delay_tsc+0x4a/0x80
[   65.837625]  [<ffffffff81024e1f>] do_machine_check+0xbaf/0xbf0
[   65.844138]  [<ffffffff813365d7>] ? intel_idle+0xc7/0x150
[   65.850166]  [<ffffffff8156f03f>] machine_check+0x1f/0x30
[   65.856195]  [<ffffffff813365d7>] ? intel_idle+0xc7/0x150
[   65.862222]  <<EOE>>  [<ffffffff814283d5>] cpuidle_enter_state+0x55/0x170
[   65.869823]  [<ffffffff814285a7>] cpuidle_enter+0x17/0x20
[   65.875852]  [<ffffffff81097b08>] cpu_startup_entry+0x2d8/0x370
[   65.882467]  [<ffffffff8102fe29>] start_secondary+0x159/0x180

There's __drm_modeset_lock_all() which Daniel Vetter introduced for this
purpose. We can leverage that without reinventing anything. This patch
works with the latest kernel.
Reviewed-by: NRob Clark <robdclark@gmail.com>
Tested-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NRui Wang <rui.y.wang@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>
      9aa609e1
  5. 20 1月, 2015 12 次提交
    • R
      mfd: rtsx_usb: Fix runtime PM deadlock · b166010f
      由 Roger Tseng 提交于 
      sd_set_power_mode() in derived module drivers/mmc/host/rtsx_usb_sdmmc.c
acquires dev_mutex and then calls pm_runtime_get_sync() to make sure the
device is awake while initializing a newly inserted card. Once it is
called during suspending state and explicitly before rtsx_usb_suspend()
acquires the same dev_mutex, both routine deadlock and further hang the
driver because pm_runtime_get_sync() waits the pending PM operations.

Fix this by using an empty suspend method. mmc_core always turns the
LED off after a request is done and thus it is ok to remove the only
rtsx_usb_turn_off_led() here.

Cc: <stable@vger.kernel.org> # v3.16+
Fixes: 730876be ("mfd: Add realtek USB card reader driver")
Signed-off-by: NRoger Tseng <rogerable@realtek.com>
[Lee: Removed newly unused variable]
Signed-off-by: NLee Jones <lee.jones@linaro.org>
      b166010f
    • F
      mfd: tps65218: Make INT1 our status_base register · f29ae369
      由 Felipe Balbi 提交于 
      If we don't tell regmap-irq that our first status
register is at offset 1, it will try to read offset
zero, which is the chipid register.

Fixes: 44b4dc61 mfd: tps65218: Add driver for the TPS65218 PMIC
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
      f29ae369
    • F
      mfd: tps65218: Make INT[12] and STATUS registers volatile · 773328da
      由 Felipe Balbi 提交于 
      STATUS register can be modified by the HW, so we
should bypass cache because of that.

In the case of INT[12] registers, they are the ones
that actually clear the IRQ source at the time they
are read. If we rely on the cache for them, we will
never be able to clear the interrupt, which will cause
our IRQ line to be disabled due to IRQ throttling.

Fixes: 44b4dc61 mfd: tps65218: Add driver for the TPS65218 PMIC
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
      773328da
    • F
      mfd: da9052-core: Fix platform-device id collision · b3f6c73d
      由 Fabio Estevam 提交于 
      Allow multiple DA9052 regulators be registered by registering with
PLATFORM_DEVID_AUTO instead of PLATFORM_DEVID_NONE.

The subdevices are currently registered with PLATFORM_DEVID_NONE, which
will cause a name collision on the platform bus when multiple regulators
are registered:

[    0.128855] da9052-regulator da9052-regulator: invalid regulator ID specified
[    0.128973] da9052-regulator: probe of da9052-regulator failed with error -22
[    0.129148] ------------[ cut here ]------------
[    0.129200] WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5c/0x7c()
[    0.129233] sysfs: cannot create duplicate filename '/devices/platform/soc/60000000.aips/63fc8000.i2c/i2c-0/0-0048/da9052-regulator
...
[    0.132891] ------------[ cut here ]------------
[    0.132924] WARNING: CPU: 0 PID: 1 at lib/kobject.c:240 kobject_add_internal+0x24c/0x2cc()
[    0.132957] kobject_add_internal failed for da9052-regulator with -EEXIST, don't try to register things with the same name in the same directory.
...
[    0.137000] da9052 0-0048: mfd_add_devices failed: -17
[    0.138486] da9052: probe of 0-0048 failed with error -17

Based on the fix done by Johan Hovold at commit b6684228 ("mfd:
viperboard: Fix platform-device id collision").

Tested on a imx53-qsb board, where multiple DA9053 regulators can be
successfully probed.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
      b3f6c73d
    • D
      s2io: use snprintf() as a safety feature · a8c1d28a
      由 Dan Carpenter 提交于 
      "sp->desc[i]" has 25 characters.  "dev->name" has 15 characters.  If we
used all 15 characters then the sprintf() would overflow.

I changed the "sprintf(sp->name, "%s Neterion %s"" to snprintf(), as
well, even though it can't overflow just to be consistent.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a8c1d28a
    • H
      r8152: remove sram_read · b4d99def
      由 hayeswang 提交于 
      Read OCP register 0xa43a~0xa43b would clear some flags which the hw
would use, and it may let the device lost. However, the unit of
reading is 4 bytes. That is, it would read 0xa438~0xa43b when calling
sram_read() to read OCP_SRAM_DATA.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b4d99def
    • H
      r8152: remove generic_ocp_read before writing · 8cb3db24
      由 hayeswang 提交于 
      For ocp_write_word() and ocp_write_byte(), there is a generic_ocp_read()
which is used to read the whole 4 byte data, keep the unchanged bytes,
and modify the expected bytes. However, the "byen" could be used to
determine which bytes of the 4 bytes to write, so the action could be
removed.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8cb3db24
    • H
      bgmac: activate irqs only if there is nothing to poll · 43f159c6
      由 Hauke Mehrtens 提交于 
      IRQs should only get activated when there is nothing to poll in the
queue any more and to after every poll.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      43f159c6
    • H
      bgmac: register napi before the device · 6216642f
      由 Hauke Mehrtens 提交于 
      napi should get registered before the netdev and not after.
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6216642f
    • B
      sh_eth: Fix ethtool operation crash when net device is down · 4f9dce23
      由 Ben Hutchings 提交于 
      The driver connects and disconnects the PHY device whenever the
net device is brought up and down.  The ethtool get_settings,
set_settings and nway_reset operations will dereference a null
or dangling pointer if called while it is down.

I think it would be preferable to keep the PHY connected, but there
may be good reasons not to.

As an immediate fix for this bug:
- Set the phydev pointer to NULL after disconnecting the PHY
- Change those three operations to return -ENODEV while the PHY is
  not connected
Signed-off-by: NBen Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4f9dce23
    • B
      sh_eth: Fix promiscuous mode on chips without TSU · b37feed7
      由 Ben Hutchings 提交于 
      Currently net_device_ops::set_rx_mode is only implemented for
chips with a TSU (multiple address table).  However we do need
to turn the PRM (promiscuous) flag on and off for other chips.

- Remove the unlikely() from the TSU functions that we may safely
  call for chips without a TSU
- Make setting of the MCT flag conditional on the tsu capability flag
- Rename sh_eth_set_multicast_list() to sh_eth_set_rx_mode() and plumb
  it into both net_device_ops structures
- Remove the previously-unreachable branch in sh_eth_rx_mode() that
  would otherwise reset the flags to defaults for non-TSU chips
Signed-off-by: NBen Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b37feed7
    • D
      libata: prevent HSM state change race between ISR and PIO · ce751452
      由 David Jeffery 提交于 
      It is possible for ata_sff_flush_pio_task() to set ap->hsm_task_state to
HSM_ST_IDLE in between the time __ata_sff_port_intr() checks for HSM_ST_IDLE
and before it calls ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG().

This problem is hard to reproduce making this patch hard to verify, but this
fix will prevent the race.

I have not been able to reproduce the problem, but here is a crash dump from
a 2.6.32 kernel.

On examining the ata port's state, its hsm_task_state field has a value of HSM_ST_IDLE:

crash> struct ata_port.hsm_task_state ffff881c1121c000
  hsm_task_state = 0

Normally, this should not be possible as ata_sff_hsm_move() was called from ata_sff_host_intr(),
which checks hsm_task_state and won't call ata_sff_hsm_move() if it has a HSM_ST_IDLE value.

PID: 11053  TASK: ffff8816e846cae0  CPU: 0   COMMAND: "sshd"
 #0 [ffff88008ba03960] machine_kexec at ffffffff81038f3b
 #1 [ffff88008ba039c0] crash_kexec at ffffffff810c5d92
 #2 [ffff88008ba03a90] oops_end at ffffffff8152b510
 #3 [ffff88008ba03ac0] die at ffffffff81010e0b
 #4 [ffff88008ba03af0] do_trap at ffffffff8152ad74
 #5 [ffff88008ba03b50] do_invalid_op at ffffffff8100cf95
 #6 [ffff88008ba03bf0] invalid_op at ffffffff8100bf9b
    [exception RIP: ata_sff_hsm_move+317]
    RIP: ffffffff813a77ad  RSP: ffff88008ba03ca0  RFLAGS: 00010097
    RAX: 0000000000000000  RBX: ffff881c1121dc60  RCX: 0000000000000000
    RDX: ffff881c1121dd10  RSI: ffff881c1121dc60  RDI: ffff881c1121c000
    RBP: ffff88008ba03d00   R8: 0000000000000000   R9: 000000000000002e
    R10: 000000000001003f  R11: 000000000000009b  R12: ffff881c1121c000
    R13: 0000000000000000  R14: 0000000000000050  R15: ffff881c1121dd78
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffff88008ba03d08] ata_sff_host_intr at ffffffff813a7fbd
 #8 [ffff88008ba03d38] ata_sff_interrupt at ffffffff813a821e
 #9 [ffff88008ba03d78] handle_IRQ_event at ffffffff810e6ec0
--- <IRQ stack> ---
    [exception RIP: pipe_poll+48]
    RIP: ffffffff81192780  RSP: ffff880f26d459b8  RFLAGS: 00000246
    RAX: 0000000000000000  RBX: ffff880f26d459c8  RCX: 0000000000000000
    RDX: 0000000000000001  RSI: 0000000000000000  RDI: ffff881a0539fa80
    RBP: ffffffff8100bb8e   R8: ffff8803b23324a0   R9: 0000000000000000
    R10: ffff880f26d45dd0  R11: 0000000000000008  R12: ffffffff8109b646
    R13: ffff880f26d45948  R14: 0000000000000246  R15: 0000000000000246
    ORIG_RAX: ffffffffffffff10  CS: 0010  SS: 0018
    RIP: 00007f26017435c3  RSP: 00007fffe020c420  RFLAGS: 00000206
    RAX: 0000000000000017  RBX: ffffffff8100b072  RCX: 00007fffe020c45c
    RDX: 00007f2604a3f120  RSI: 00007f2604a3f140  RDI: 000000000000000d
    RBP: 0000000000000000   R8: 00007fffe020e570   R9: 0101010101010101
    R10: 0000000000000000  R11: 0000000000000246  R12: 00007fffe020e5f0
    R13: 00007fffe020e5f4  R14: 00007f26045f373c  R15: 00007fffe020e5e0
    ORIG_RAX: 0000000000000017  CS: 0033  SS: 002b

Somewhere between the ata_sff_hsm_move() check and the ata_sff_host_intr() check, the value changed.
On examining the other cpus to see what else was running, another cpu was running the error handler
routines:

PID: 326    TASK: ffff881c11014aa0  CPU: 1   COMMAND: "scsi_eh_1"
 #0 [ffff88008ba27e90] crash_nmi_callback at ffffffff8102fee6
 #1 [ffff88008ba27ea0] notifier_call_chain at ffffffff8152d515
 #2 [ffff88008ba27ee0] atomic_notifier_call_chain at ffffffff8152d57a
 #3 [ffff88008ba27ef0] notify_die at ffffffff810a154e
 #4 [ffff88008ba27f20] do_nmi at ffffffff8152b1db
 #5 [ffff88008ba27f50] nmi at ffffffff8152aaa0
    [exception RIP: _spin_lock_irqsave+47]
    RIP: ffffffff8152a1ff  RSP: ffff881c11a73aa0  RFLAGS: 00000006
    RAX: 0000000000000001  RBX: ffff881c1121deb8  RCX: 0000000000000000
    RDX: 0000000000000246  RSI: 0000000000000020  RDI: ffff881c122612d8
    RBP: ffff881c11a73aa0   R8: ffff881c17083800   R9: 0000000000000000
    R10: 0000000000000000  R11: 0000000000000000  R12: ffff881c1121c000
    R13: 000000000000001f  R14: ffff881c1121dd50  R15: ffff881c1121dc60
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0000
--- <NMI exception stack> ---
 #6 [ffff881c11a73aa0] _spin_lock_irqsave at ffffffff8152a1ff
 #7 [ffff881c11a73aa8] ata_exec_internal_sg at ffffffff81396fb5
 #8 [ffff881c11a73b58] ata_exec_internal at ffffffff81397109
 #9 [ffff881c11a73bd8] atapi_eh_request_sense at ffffffff813a34eb

Before it tried to acquire a spinlock, ata_exec_internal_sg() called ata_sff_flush_pio_task().
This function will set ap->hsm_task_state to HSM_ST_IDLE, and has no locking around setting this
value. ata_sff_flush_pio_task() can then race with the interrupt handler and potentially set
HSM_ST_IDLE at a fatal moment, which will trigger a kernel BUG.

v2: Fixup comment in ata_sff_flush_pio_task()

tj: Further updated comment.  Use ap->lock instead of shost lock and
    use the [un]lock_irq variant instead of the irqsave/restore one.
Signed-off-by: NDavid Milburn <dmilburn@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
      ce751452
  7. 19 1月, 2015 2 次提交