- 01 12月, 2015 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
sendpage did not care about credentials at all. This could lead to situations in which because of fd passing between processes we could append data to skbs with different scm data. It is illegal to splice those skbs together. Instead we have to allocate a new skb and if requested fill out the scm details. Fixes: 869e7c62 ("net: af_unix: implement stream sendpage support") Reported-by: NAl Viro <viro@zeniv.linux.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 11月, 2015 1 次提交
-
-
由 Rainer Weikusat 提交于
Rainer Weikusat <rweikusat@mobileactivedefense.com> writes: An AF_UNIX datagram socket being the client in an n:1 association with some server socket is only allowed to send messages to the server if the receive queue of this socket contains at most sk_max_ack_backlog datagrams. This implies that prospective writers might be forced to go to sleep despite none of the message presently enqueued on the server receive queue were sent by them. In order to ensure that these will be woken up once space becomes again available, the present unix_dgram_poll routine does a second sock_poll_wait call with the peer_wait wait queue of the server socket as queue argument (unix_dgram_recvmsg does a wake up on this queue after a datagram was received). This is inherently problematic because the server socket is only guaranteed to remain alive for as long as the client still holds a reference to it. In case the connection is dissolved via connect or by the dead peer detection logic in unix_dgram_sendmsg, the server socket may be freed despite "the polling mechanism" (in particular, epoll) still has a pointer to the corresponding peer_wait queue. There's no way to forcibly deregister a wait queue with epoll. Based on an idea by Jason Baron, the patch below changes the code such that a wait_queue_t belonging to the client socket is enqueued on the peer_wait queue of the server whenever the peer receive queue full condition is detected by either a sendmsg or a poll. A wake up on the peer queue is then relayed to the ordinary wait queue of the client socket via wake function. The connection to the peer wait queue is again dissolved if either a wake up is about to be relayed or the client socket reconnects or a dead peer is detected or the client socket is itself closed. This enables removing the second sock_poll_wait from unix_dgram_poll, thus avoiding the use-after-free, while still ensuring that no blocked writer sleeps forever. Signed-off-by: NRainer Weikusat <rweikusat@mobileactivedefense.com> Fixes: ec0d215f ("af_unix: fix 'poll for write'/connected DGRAM sockets") Reviewed-by: NJason Baron <jbaron@akamai.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 11月, 2015 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
While possibly in future we don't necessarily need to use sk_buff_head.lock this is a rather larger change, as it affects the af_unix fd garbage collector, diag and socket cleanups. This is too much for a stable patch. For the time being grab sk_buff_head.lock without disabling bh and irqs, so don't use locked skb_queue_tail. Fixes: 869e7c62 ("net: af_unix: implement stream sendpage support") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Reported-by: NEric Dumazet <edumazet@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2015 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
In case multiple writes to a unix stream socket race we could end up in a situation where we pre-allocate a new skb for use in unix_stream_sendpage but have to free it again in the locked section because another skb has been appended meanwhile, which we must use. Accidentally we didn't clear the pointer after consuming it and so we touched freed memory while appending it to the sk_receive_queue. So, clear the pointer after consuming the skb. This bug has been found with syzkaller (http://github.com/google/syzkaller) by Dmitry Vyukov. Fixes: 869e7c62 ("net: af_unix: implement stream sendpage support") Reported-by: NDmitry Vyukov <dvyukov@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 11月, 2015 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
During splicing an af-unix socket to a pipe we have to drop all af-unix socket locks. While doing so we allow another reader to enter unix_stream_read_generic which can read, copy and finally free another skb. If exactly this skb is just in process of being spliced we get a use-after-free report by kasan. First, we must make sure to not have a free while the skb is used during the splice operation. We simply increment its use counter before unlocking the reader lock. Stream sockets have the nice characteristic that we don't care about zero length writes and they never reach the peer socket's queue. That said, we can take the UNIXCB.consumed field as the indicator if the skb was already freed from the socket's receive queue. If the skb was fully consumed after we locked the reader side again we know it has been dropped by a second reader. We indicate a short read to user space and abort the current splice operation. This bug has been found with syzkaller (http://github.com/google/syzkaller) by Dmitry Vyukov. Fixes: 2b514574 ("net: af_unix: implement splice for stream af_unix sockets") Reported-by: NDmitry Vyukov <dvyukov@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 10月, 2015 1 次提交
-
-
由 Eric Dumazet 提交于
poll(POLLOUT) on a listener should not report fd is ready for a write(). This would break some applications using poll() and pfd.events = -1, as they would not block in poll() Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NAlan Burlison <Alan.Burlison@oracle.com> Tested-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 10月, 2015 1 次提交
-
-
由 Andrey Vagin 提交于
Now send with MSG_PEEK can return data from multiple SKBs. Unfortunately we take into account the peek offset for each skb, that is wrong. We need to apply the peek offset only once. In addition, the peek offset should be used only if MSG_PEEK is set. Cc: "David S. Miller" <davem@davemloft.net> (maintainer:NETWORKING Cc: Eric Dumazet <edumazet@google.com> (commit_signer:1/14=7%) Cc: Aaron Conole <aconole@bytheb.org> Fixes: 9f389e35 ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag") Signed-off-by: NAndrey Vagin <avagin@openvz.org> Tested-by: NAaron Conole <aconole@bytheb.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 9月, 2015 1 次提交
-
-
由 Aaron Conole 提交于
AF_UNIX sockets now return multiple skbs from recv() when MSG_PEEK flag is set. This is referenced in kernel bugzilla #12323 @ https://bugzilla.kernel.org/show_bug.cgi?id=12323 As described both in the BZ and lkml thread @ http://lkml.org/lkml/2008/1/8/444 calling recv() with MSG_PEEK on an AF_UNIX socket only reads a single skb, where the desired effect is to return as much skb data has been queued, until hitting the recv buffer size (whichever comes first). The modified MSG_PEEK path will now move to the next skb in the tree and jump to the again: label, rather than following the natural loop structure. This requires duplicating some of the loop head actions. This was tested using the python socketpair python code attached to the bugzilla issue. Signed-off-by: NAaron Conole <aconole@bytheb.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 6月, 2015 1 次提交
-
-
由 Stephen Smalley 提交于
SCM_SECURITY was originally only implemented for datagram sockets, not for stream sockets. However, SCM_CREDENTIALS is supported on Unix stream sockets. For consistency, implement Unix stream support for SCM_SECURITY as well. Also clean up the existing code and get rid of the superfluous UNIXSID macro. Motivated by https://bugzilla.redhat.com/show_bug.cgi?id=1224211, where systemd was using SCM_CREDENTIALS and assumed wrongly that SCM_SECURITY was also supported on Unix stream sockets. Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov> Acked-by: NPaul Moore <paul@paul-moore.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 5月, 2015 1 次提交
-
-
由 Mark Salyzyn 提交于
got a rare NULL pointer dereference in clear_bit Signed-off-by: NMark Salyzyn <salyzyn@android.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> ---- v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 5月, 2015 2 次提交
-
-
由 Hannes Frederic Sowa 提交于
unix_stream_recvmsg is refactored to unix_stream_read_generic in this patch and enhanced to deal with pipe splicing. The refactoring is inneglible, we mostly have to deal with a non-existing struct msghdr argument. Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
This patch implements sendpage support for AF_UNIX SOCK_STREAM sockets. This is also required for a complete splice implementation. The implementation is a bit tricky because we append to already existing skbs and so have to hold unix_sk->readlock to protect the reading side from either advancing UNIXCB.consumed or freeing the skb at the socket receive tail. Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 5月, 2015 1 次提交
-
-
由 Eric W. Biederman 提交于
In preparation for changing how struct net is refcounted on kernel sockets pass the knowledge that we are creating a kernel socket from sock_create_kern through to sk_alloc. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2015 2 次提交
-
-
由 David Howells 提交于
places where we are dealing with S_ISSOCK file creation/lookups. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
AF_UNIX sockets should call mknod on the top layer only and should not attempt to modify the lower layer in a layered filesystem such as overlayfs. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 03 3月, 2015 1 次提交
-
-
由 Ying Xue 提交于
After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2015 1 次提交
-
-
由 Christoph Hellwig 提交于
The sock_iocb structure is allocate on stack for each read/write-like operation on sockets, and contains various fields of which only the embedded msghdr and sometimes a pointer to the scm_cookie is ever used. Get rid of the sock_iocb and put a msghdr directly on the stack and pass the scm_cookie explicitly to netlink_mmap_sendmsg. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 12月, 2014 1 次提交
-
-
由 Al Viro 提交于
Note that the code _using_ ->msg_iter at that point will be very unhappy with anything other than unshifted iovec-backed iov_iter. We still need to convert users to proper primitives. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 24 11月, 2014 1 次提交
-
-
由 Al Viro 提交于
... and kill skb_copy_datagram_iovec() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 06 11月, 2014 1 次提交
-
-
由 David S. Miller 提交于
This encapsulates all of the skb_copy_datagram_iovec() callers with call argument signature "skb, offset, msghdr->msg_iov, length". When we move to iov_iters in the networking, the iov_iter object will sit in the msghdr. Having a helper like this means there will be less places to touch during that transformation. Based upon descriptions and patch from Al Viro. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2014 1 次提交
-
-
由 Kirill Tkhai 提交于
Using whole of allocated pages reduces requested skb->data size. This is just a little more thriftily allocation. netperf does not show difference with the current performance. Signed-off-by: NKirill Tkhai <ktkhai@parallels.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 4月, 2014 1 次提交
-
-
由 Peter Zijlstra 提交于
Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 12 4月, 2014 1 次提交
-
-
由 David S. Miller 提交于
Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2014 1 次提交
-
-
由 Eric Dumazet 提交于
Some applications didn't expect recvmsg() on a non blocking socket could return -EINTR. This possibility was added as a side effect of commit b3ca9b02 ("net: fix multithreaded signal handling in unix recv routines"). To hit this bug, you need to be a bit unlucky, as the u->readlock mutex is usually held for very small periods. Fixes: b3ca9b02 ("net: fix multithreaded signal handling in unix recv routines") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 3月, 2014 1 次提交
-
-
由 Anton Blanchard 提交于
The unix socket code is using the result of csum_partial to hash into a lookup table: unix_hash_fold(csum_partial(sunaddr, len, 0)); csum_partial is only guaranteed to produce something that can be folded into a checksum, as its prototype explains: * returns a 32-bit number suitable for feeding into itself * or csum_tcpudp_magic The 32bit value should not be used directly. Depending on the alignment, the ppc64 csum_partial will return different 32bit partial checksums that will fold into the same 16bit checksum. This difference causes the following testcase (courtesy of Gustavo) to sometimes fail: #include <sys/socket.h> #include <stdio.h> int main() { int fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0); int i = 1; setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &i, 4); struct sockaddr addr; addr.sa_family = AF_LOCAL; bind(fd, &addr, 2); listen(fd, 128); struct sockaddr_storage ss; socklen_t sslen = (socklen_t)sizeof(ss); getsockname(fd, (struct sockaddr*)&ss, &sslen); fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0); if (connect(fd, (struct sockaddr*)&ss, sslen) == -1){ perror(NULL); return 1; } printf("OK\n"); return 0; } As suggested by davem, fix this by using csum_fold to fold the partial 32bit checksum into a 16bit checksum before using it. Signed-off-by: NAnton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 1月, 2014 1 次提交
-
-
由 Steffen Hurrle 提交于
This is a follow-up patch to f3d33426 ("net: rework recvmsg handler msg_name and msg_namelen logic"). DECLARE_SOCKADDR validates that the structure we use for writing the name information to is not larger than the buffer which is reserved for msg->msg_name (which is 128 bytes). Also use DECLARE_SOCKADDR consistently in sendmsg code paths. Signed-off-by: NSteffen Hurrle <steffen@hurrle.net> Suggested-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 12月, 2013 1 次提交
-
-
由 Sasha Levin 提交于
This is similar to the set_peek_off patch where calling bind while the socket is stuck in unix_dgram_recvmsg() will block and cause a hung task spew after a while. This is also the last place that did a straightforward mutex_lock(), so there shouldn't be any more of these patches. Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 12月, 2013 1 次提交
-
-
由 Sasha Levin 提交于
unix_dgram_recvmsg() will hold the readlock of the socket until recv is complete. In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until unix_dgram_recvmsg() will complete (which can take a while) without allowing us to break out of it, triggering a hung task spew. Instead, allow set_peek_off to fail, this way userspace will not hang. Signed-off-by: NSasha Levin <sasha.levin@oracle.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 12月, 2013 1 次提交
-
-
由 wangweidong 提交于
use pr_<level> instead of printk(LEVEL) Signed-off-by: NWang Weidong <wangweidong1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 11月, 2013 1 次提交
-
-
由 Hannes Frederic Sowa 提交于
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 10月, 2013 1 次提交
-
-
由 Daniel Borkmann 提交于
In the case of credentials passing in unix stream sockets (dgram sockets seem not affected), we get a rather sparse race after commit 16e57262 ("af_unix: dont send SCM_CREDENTIALS by default"). We have a stream server on receiver side that requests credential passing from senders (e.g. nc -U). Since we need to set SO_PASSCRED on each spawned/accepted socket on server side to 1 first (as it's not inherited), it can happen that in the time between accept() and setsockopt() we get interrupted, the sender is being scheduled and continues with passing data to our receiver. At that time SO_PASSCRED is neither set on sender nor receiver side, hence in cmsg's SCM_CREDENTIALS we get eventually pid:0, uid:65534, gid:65534 (== overflow{u,g}id) instead of what we actually would like to see. On the sender side, here nc -U, the tests in maybe_add_creds() invoked through unix_stream_sendmsg() would fail, as at that exact time, as mentioned, the sender has neither SO_PASSCRED on his side nor sees it on the server side, and we have a valid 'other' socket in place. Thus, sender believes it would just look like a normal connection, not needing/requesting SO_PASSCRED at that time. As reverting 16e57262 would not be an option due to the significant performance regression reported when having creds always passed, one way/trade-off to prevent that would be to set SO_PASSCRED on the listener socket and allow inheriting these flags to the spawned socket on server side in accept(). It seems also logical to do so if we'd tell the listener socket to pass those flags onwards, and would fix the race. Before, strace: recvmsg(4, {msg_name(0)=NULL, msg_iov(1)=[{"blub\n", 4096}], msg_controllen=32, {cmsg_len=28, cmsg_level=SOL_SOCKET, cmsg_type=SCM_CREDENTIALS{pid=0, uid=65534, gid=65534}}, msg_flags=0}, 0) = 5 After, strace: recvmsg(4, {msg_name(0)=NULL, msg_iov(1)=[{"blub\n", 4096}], msg_controllen=32, {cmsg_len=28, cmsg_level=SOL_SOCKET, cmsg_type=SCM_CREDENTIALS{pid=11580, uid=1000, gid=1000}}, msg_flags=0}, 0) = 5 Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 8月, 2013 1 次提交
-
-
由 Eric Dumazet 提交于
commit e370a723 ("af_unix: improve STREAM behavior with fragmented memory") added a bug on large send() because the skb_copy_datagram_from_iovec() call always start from the beginning of iovec. We must instead use the @sent variable to properly skip the already processed part. Reported-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 8月, 2013 2 次提交
-
-
由 Eric Dumazet 提交于
Adding paged frags skbs to af_unix sockets introduced a performance regression on large sends because of additional page allocations, even if each skb could carry at least 100% more payload than before. We can instruct sock_alloc_send_pskb() to attempt high order allocations. Most of the time, it does a single page allocation instead of 8. I added an additional parameter to sock_alloc_send_pskb() to let other users to opt-in for this new feature on followup patches. Tested: Before patch : $ netperf -t STREAM_STREAM STREAM STREAM TEST Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 2304 212992 212992 10.00 46861.15 After patch : $ netperf -t STREAM_STREAM STREAM STREAM TEST Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 2304 212992 212992 10.00 57981.11 Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
unix_stream_sendmsg() currently uses order-2 allocations, and we had numerous reports this can fail. The __GFP_REPEAT flag present in sock_alloc_send_pskb() is not helping. This patch extends the work done in commit eb6a2481 ("af_unix: reduce high order page allocations) for datagram sockets. This opens the possibility of zero copy IO (splice() and friends) The trick is to not use skb_pull() anymore in recvmsg() path, and instead add a @consumed field in UNIXCB() to track amount of already read payload in the skb. There is a performance regression for large sends because of extra page allocations that will be addressed in a follow-up patch, allowing sock_alloc_send_pskb() to attempt high order page allocations. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 5月, 2013 1 次提交
-
-
由 Colin Cross 提交于
Avoid waking up every thread sleeping in read call on an AF_UNIX socket during suspend and resume by calling a freezable blocking call. Previous patches modified the freezer to avoid sending wakeups to threads that are blocked in freezable blocking calls. This call was selected to be converted to a freezable call because it doesn't hold any locks or release any resources when interrupted that might be needed by another freezing task or a kernel driver during suspend, and is a common site where idle userspace tasks are blocked. Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NColin Cross <ccross@android.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
- 30 4月, 2013 1 次提交
-
-
由 Benjamin Poirier 提交于
Currently, peeking on a unix stream socket with an offset larger than len of the data in the sk receive queue returns immediately with bogus data. This patch fixes this so that the behavior is the same as peeking with no offset on an empty queue: the caller blocks. Signed-off-by: NBenjamin Poirier <bpoirier@suse.de> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 4月, 2013 1 次提交
-
-
由 Eric W. Biederman 提交于
Now that uids and gids are completely encapsulated in kuid_t and kgid_t we no longer need to pass struct cred which allowed us to test both the uid and the user namespace for equality. Passing struct cred potentially allows us to pass the entire group list as BSD does but I don't believe the cost of cache line misses justifies retaining code for a future potential application. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 4月, 2013 2 次提交
-
-
由 Eric W. Biederman 提交于
It was reported that the following LSB test case failed https://lsbbugs.linuxfoundation.org/attachment.cgi?id=2144 because we were not coallescing unix stream messages when the application was expecting us to. The problem was that the first send was before the socket was accepted and thus sock->sk_socket was NULL in maybe_add_creds, and the second send after the socket was accepted had a non-NULL value for sk->socket and thus we could tell the credentials were not needed so we did not bother. The unnecessary credentials on the first message cause unix_stream_recvmsg to start verifying that all messages had the same credentials before coallescing and then the coallescing failed because the second message had no credentials. Ignoring credentials when we don't care in unix_stream_recvmsg fixes a long standing pessimization which would fail to coallesce messages when reading from a unix stream socket if the senders were different even if we did not care about their credentials. I have tested this and verified that the in the LSB test case mentioned above that the messages do coallesce now, while the were failing to coallesce without this change. Reported-by: NKarel Srot <ksrot@redhat.com> Reported-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
This reverts commit 14134f65. The problem that the above patch was meant to address is that af_unix messages are not being coallesced because we are sending unnecesarry credentials. Not sending credentials in maybe_add_creds totally breaks unconnected unix domain sockets that wish to send credentails to other sockets. In practice this break some versions of udev because they receive a message and the sending uid is bogus so they drop the message. Reported-by: NSven Joachim <svenjoac@gmx.de> Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 4月, 2013 1 次提交
-
-
由 Jacob Keller 提交于
Commit 7d4c04fc ("net: add option to enable error queue packets waking select") has an issue due to operator precedence causing the bit-wise OR to bind to the sock_flags call instead of the result of the terniary conditional. This fixes the *_poll functions to work properly. The old code results in "mask |= POLLPRI" instead of what was intended, which is to only include POLLPRI when the socket option is enabled. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-