- 06 9月, 2011 2 次提交
-
-
由 Jouni Malinen 提交于
This cleans up the connect event parsing by defining a union in struct wmi_connect_event to match with the three possible sets of fields that the target uses depending on which type of connect event is being indicated. In addition, two AP cases are now separated from ath6kl_connect_event() so that correct field names can be used to make it actually possible to understand what the code is doing. The bug hiding in the previous mess was in parsing the AID incorrectly when processing the new station connecting event in AP mode. The fix here for that is also fixing TIM updates for PS buffering to use the correct AID. Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Jouni Malinen 提交于
There is a 2-octet reserved field between the flag and aid fields. Fix that to make the target actually behave as requested. Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
- 02 9月, 2011 3 次提交
-
-
由 Vivek Natarajan 提交于
Firmware initiates roaming only after it reaches a rssi of 20. This lower rssi threshold can be modified through a wmi command to modify the roaming behavior. kvalo: rename debugfs functions and move comment about rssi units next to ath6kl_wmi_set_roam_lrssi_cmd() Signed-off-by: NVivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Kalle Valo 提交于
Firmware log parameters can be controlled now with help of fwlog_mask debugfs file. Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Kalle Valo 提交于
Firmware sends binary logs with WMIX_DBGLOG_EVENTID event. Create a buffer which stores the latest logs and which can be copied from fwlog debugfs file with cp command. To save memory firmware log support is enabled only when CONFIG_ATH6KL_DEBUG is enabled. Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
- 01 9月, 2011 1 次提交
-
-
由 Kalle Valo 提交于
This is port from the staging version of ath6kl. The interface to user space is exactly same. Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
- 31 8月, 2011 11 次提交
-
-
由 Jouni Malinen 提交于
Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Jouni Malinen 提交于
Use WMI_TX_STATUS_EVENTID event to generate cfg80211_mgmt_tx_frame() calls. Since we support only a single pending frame for now, use the hardcoded cookie value 1 and store a copy of the pending frame in the driver. Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Jouni Malinen 提交于
Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Edward Lu 提交于
Signed-off-by: NEdward Lu <elu@qca.qualcomm.com> Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Jouni Malinen 提交于
Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Jouni Malinen 提交于
Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Jouni Malinen 提交于
Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Jouni Malinen 提交于
The target is not ready to accept addkey commands until the connect event has been delivered, so delay these operations for the initial GTK. In addition, properly set interface connected and mark netdev ready when the AP mode setup has been completed. Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Jouni Malinen 提交于
Use cfg80211 add/del_beacon callbacks for starting/stopping AP mode and set_beacon to update AP configuration (mainly, to update Beacon and Probe Response IEs). Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
Signed-off-by: NVasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
Signed-off-by: NVasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
- 10 8月, 2011 11 次提交
-
-
Use wlan_iterate_nodes() directly. Signed-off-by: NVasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
Signed-off-by: NVasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
By having scan_table in struct ath6kl, it makes sense to move initialization to ath6kl_init() and deinitialization to ath6kl_destroy(). Signed-off-by: NVasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
Signed-off-by: NVasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
Use the bssid from ath6kl directly. Signed-off-by: NVasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
This is nothing but bssid of struct ath6kl. Signed-off-by: NVasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
And remove the reference to wmi in ath6kl_node_table. Signed-off-by: NVasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
It does not need to be in wmi Signed-off-by: NVasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
Signed-off-by: NVasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Raja Mani 提交于
ath6kl: Avoid two memset to clear src and desr mac addr variable memory in ath6kl_wmi_dot11_hdr_remove() Signed-off-by: NRaja Mani <rmani@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Kalle Valo 提交于
Last May we started working on cleaning up ath6kl driver which is currently in staging. The work has happened in a separate ath6kl-cleanup tree: http://git.kernel.org/?p=linux/kernel/git/kvalo/ath6kl-cleanup.git;a=summary After over 1100 (!) patches we have now reached a state where I would like to start discussing about pushing the driver to the wireless trees and replacing the staging driver. The driver is now a lot smaller and looks like a proper Linux driver. The size of the driver (measured with simple wc -l) dropped from 49 kLOC to 18 kLOC and the number of the .c and .h files dropped from 107 to 22. Most importantly the number of subdirectories reduced from 26 to zero :) There are two remaining checkpatch warnings in the driver which we decided to omit for now: drivers/net/wireless/ath/ath6kl/debug.c:31: WARNING: printk() should include KERN_ facility level drivers/net/wireless/ath/ath6kl/sdio.c:527: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt The driver has endian annotations for all the hardware specific structures and there are no sparse errors. Unfortunately I don't have any big endian hardware to test that right now. We have been testing the driver both on x86 and arm platforms. The code is also compiled with sparc and parisc cross compilers. Notable missing features compared to the current staging driver are: o HCI over SDIO support o nl80211 testmode o firmware logging o suspend support Testmode, firmware logging and suspend support will be added soon. HCI over SDIO support will be more difficult as the HCI driver needs to share code with the wifi driver. This is something we need to research more. Also I want to point out the changes I did for signed endian support. As I wasn't able to find any support for signed endian annotations I decided to follow what NTFS has done and added my own. Grep for sle16 and sle32, especially from wmi.h. Various people have been working on the cleanup, the hall of fame based on number of patches is: 543 Vasanthakumar Thiagarajan 403 Raja Mani 252 Kalle Valo 16 Vivek Natarajan 12 Suraj Sumangala 3 Joe Perches 2 Jouni Malinen Signed-off-by: NVasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: NRaja Mani <rmani@qca.qualcomm.com> Signed-off-by: NVivek Natarajan <nataraja@qca.qualcomm.com> Signed-off-by: NSuraj Sumangala <surajs@qca.qualcomm.com> Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-