1. 29 5月, 2011 1 次提交
    • E
      ns: Wire up the setns system call · 7b21fddd
      Eric W. Biederman 提交于
      32bit and 64bit on x86 are tested and working.  The rest I have looked
      at closely and I can't find any problems.
      
      setns is an easy system call to wire up.  It just takes two ints so I
      don't expect any weird architecture porting problems.
      
      While doing this I have noticed that we have some architectures that are
      very slow to get new system calls.  cris seems to be the slowest where
      the last system calls wired up were preadv and pwritev.  avr32 is weird
      in that recvmmsg was wired up but never declared in unistd.h.  frv is
      behind with perf_event_open being the last syscall wired up.  On h8300
      the last system call wired up was epoll_wait.  On m32r the last system
      call wired up was fallocate.  mn10300 has recvmmsg as the last system
      call wired up.  The rest seem to at least have syncfs wired up which was
      new in the 2.6.39.
      
      v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com>
      v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com>
      v4: Moved wiring up of the system call to another patch
      v5: ported to v2.6.39-rc6
      v6: rebased onto parisc-next and net-next to avoid syscall  conflicts.
      v7: ported to Linus's latest post 2.6.39 tree.
      
      >  arch/blackfin/include/asm/unistd.h     |    3 ++-
      >  arch/blackfin/mach-common/entry.S      |    1 +
      Acked-by: NMike Frysinger <vapier@gentoo.org>
      
      Oh - ia64 wiring looks good.
      Acked-by: NTony Luck <tony.luck@intel.com>
      Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7b21fddd
  2. 13 3月, 2010 1 次提交
    • C
      Add generic sys_ipc wrapper · baed7fc9
      Christoph Hellwig 提交于
      Add a generic implementation of the ipc demultiplexer syscall.  Except for
      s390 and sparc64 all implementations of the sys_ipc are nearly identical.
      
      There are slight differences in the types of the parameters, where mips
      and powerpc as the only 64-bit architectures with sys_ipc use unsigned
      long for the "third" argument as it gets casted to a pointer later, while
      it traditionally is an "int" like most other paramters.  frv goes even
      further and uses unsigned long for all parameters execept for "ptr" which
      is a pointer type everywhere.  The change from int to unsigned long for
      "third" and back to "int" for the others on frv should be fine due to the
      in-register calling conventions for syscalls (we already had a similar
      issue with the generic sys_ptrace), but I'd prefer to have the arch
      maintainers looks over this in details.
      
      Except for that h8300, m68k and m68knommu lack an impplementation of the
      semtimedop sub call which this patch adds, and various architectures have
      gets used - at least on i386 it seems superflous as the compat code on
      x86-64 and ia64 doesn't even bother to implement it.
      
      [akpm@linux-foundation.org: add sys_ipc to sys_ni.c]
      Signed-off-by: NChristoph Hellwig <hch@lst.de>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Cc: Jeff Dike <jdike@addtoit.com>
      Cc: Hirokazu Takata <takata@linux-m32r.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@elte.hu>
      Reviewed-by: NH. Peter Anvin <hpa@zytor.com>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: James Morris <jmorris@namei.org>
      Cc: Andreas Schwab <schwab@linux-m68k.org>
      Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
      Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      Acked-by: NDavid Howells <dhowells@redhat.com>
      Acked-by: NKyle McMartin <kyle@mcmartin.ca>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      baed7fc9
  3. 21 9月, 2009 1 次提交
    • I
      perf: Do the big rename: Performance Counters -> Performance Events · cdd6c482
      Ingo Molnar 提交于
      Bye-bye Performance Counters, welcome Performance Events!
      
      In the past few months the perfcounters subsystem has grown out its
      initial role of counting hardware events, and has become (and is
      becoming) a much broader generic event enumeration, reporting, logging,
      monitoring, analysis facility.
      
      Naming its core object 'perf_counter' and naming the subsystem
      'perfcounters' has become more and more of a misnomer. With pending
      code like hw-breakpoints support the 'counter' name is less and
      less appropriate.
      
      All in one, we've decided to rename the subsystem to 'performance
      events' and to propagate this rename through all fields, variables
      and API names. (in an ABI compatible fashion)
      
      The word 'event' is also a bit shorter than 'counter' - which makes
      it slightly more convenient to write/handle as well.
      
      Thanks goes to Stephane Eranian who first observed this misnomer and
      suggested a rename.
      
      User-space tooling and ABI compatibility is not affected - this patch
      should be function-invariant. (Also, defconfigs were not touched to
      keep the size down.)
      
      This patch has been generated via the following script:
      
        FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
      
        sed -i \
          -e 's/PERF_EVENT_/PERF_RECORD_/g' \
          -e 's/PERF_COUNTER/PERF_EVENT/g' \
          -e 's/perf_counter/perf_event/g' \
          -e 's/nb_counters/nb_events/g' \
          -e 's/swcounter/swevent/g' \
          -e 's/tpcounter_event/tp_event/g' \
          $FILES
      
        for N in $(find . -name perf_counter.[ch]); do
          M=$(echo $N | sed 's/perf_counter/perf_event/g')
          mv $N $M
        done
      
        FILES=$(find . -name perf_event.*)
      
        sed -i \
          -e 's/COUNTER_MASK/REG_MASK/g' \
          -e 's/COUNTER/EVENT/g' \
          -e 's/\<event\>/event_id/g' \
          -e 's/counter/event/g' \
          -e 's/Counter/Event/g' \
          $FILES
      
      ... to keep it as correct as possible. This script can also be
      used by anyone who has pending perfcounters patches - it converts
      a Linux kernel tree over to the new naming. We tried to time this
      change to the point in time where the amount of pending patches
      is the smallest: the end of the merge window.
      
      Namespace clashes were fixed up in a preparatory patch - and some
      stylistic fallout will be fixed up in a subsequent patch.
      
      ( NOTE: 'counters' are still the proper terminology when we deal
        with hardware registers - and these sed scripts are a bit
        over-eager in renaming them. I've undone some of that, but
        in case there's something left where 'counter' would be
        better than 'event' we can undo that on an individual basis
        instead of touching an otherwise nicely automated patch. )
      Suggested-by: NStephane Eranian <eranian@google.com>
      Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Acked-by: NPaul Mackerras <paulus@samba.org>
      Reviewed-by: NArjan van de Ven <arjan@linux.intel.com>
      Cc: Mike Galbraith <efault@gmx.de>
      Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
      Cc: Frederic Weisbecker <fweisbec@gmail.com>
      Cc: Steven Rostedt <rostedt@goodmis.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Kyle McMartin <kyle@mcmartin.ca>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: <linux-arch@vger.kernel.org>
      LKML-Reference: <new-submission>
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      cdd6c482
  4. 01 7月, 2009 1 次提交
  5. 27 4月, 2009 1 次提交
  6. 10 4月, 2009 1 次提交
  7. 02 8月, 2008 1 次提交
  8. 21 2月, 2008 1 次提交
  9. 06 2月, 2008 1 次提交
  10. 12 8月, 2007 1 次提交
  11. 17 7月, 2007 1 次提交
  12. 09 5月, 2007 1 次提交
  13. 08 12月, 2006 1 次提交
  14. 02 10月, 2006 1 次提交
    • A
      [PATCH] remove remaining errno and __KERNEL_SYSCALLS__ references · 135ab6ec
      Arnd Bergmann 提交于
      The last in-kernel user of errno is gone, so we should remove the definition
      and everything referring to it.  This also removes the now-unused lib/execve.c
      file that was introduced earlier.
      
      Also remove every trace of __KERNEL_SYSCALLS__ that still remained in the
      kernel.
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      Cc: Andi Kleen <ak@muc.de>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Richard Henderson <rth@twiddle.net>
      Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Ian Molton <spyro@f2s.com>
      Cc: Mikael Starvik <starvik@axis.com>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Cc: Hirokazu Takata <takata.hirokazu@renesas.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Kyle McMartin <kyle@mcmartin.ca>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
      Cc: Richard Curnow <rc@rc0.org.uk>
      Cc: William Lee Irwin III <wli@holomorphy.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Jeff Dike <jdike@addtoit.com>
      Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
      Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
      Cc: Chris Zankel <chris@zankel.net>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Cc: Roman Zippel <zippel@linux-m68k.org>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      135ab6ec
  15. 27 9月, 2006 1 次提交
  16. 23 6月, 2006 2 次提交
  17. 29 4月, 2006 1 次提交
  18. 11 4月, 2006 1 次提交
    • A
      [PATCH] sys_kexec_load() naming fixups · 491d4bed
      Andrew Morton 提交于
      __NR_sys_kexec_load should be __NR_kexec_load.  Mainly affects users of the
      _syscallN() macros, and glibc is already checking for __NR_kexec_load.
      
      Cc: Ulrich Drepper <drepper@redhat.com>
      Cc: "Eric W. Biederman" <ebiederm@xmission.com>
      Cc: Mikael Starvik <starvik@axis.com>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Cc: Hirokazu Takata <takata@linux-m32r.org>
      Cc: Paul Mundt <lethal@linux-sh.org>
      Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      491d4bed
  19. 15 2月, 2006 1 次提交
  20. 19 1月, 2006 1 次提交
    • D
      [PATCH] Handle TIF_RESTORE_SIGMASK for FRV · a411aee9
      David Howells 提交于
      Handle TIF_RESTORE_SIGMASK as added by David Woodhouse's patch entitled:
      
              [PATCH] 2/3 Add TIF_RESTORE_SIGMASK support for arch/powerpc
              [PATCH] 3/3 Generic sys_rt_sigsuspend
      
      It does the following:
      
       (1) Declares TIF_RESTORE_SIGMASK for FRV.
      
       (2) Invokes it over to do_signal() when TIF_RESTORE_SIGMASK is set.
      
       (3) Makes do_signal() support TIF_RESTORE_SIGMASK, using the signal mask saved
           in current->saved_sigmask.
      
       (4) Discards sys_rt_sigsuspend() from the arch, using the generic one instead.
      
       (5) Makes sys_sigsuspend() save the signal mask and set TIF_RESTORE_SIGMASK
           rather than attempting to fudge the return registers.
      
       (6) Makes sys_sigsuspend() return -ERESTARTNOHAND rather than looping
           intrinsically.
      
       (7) Makes setup_frame(), setup_rt_frame() and handle_signal() return 0 or
           -EFAULT rather than true/false to be consistent with the rest of the
            kernel.
      
      Due to the fact do_signal() is then only called from one place:
      
       (8) Make do_signal() no longer have a return value is it was just being
           ignored; force_sig() takes care of this.
      
       (9) Discards the old sigmask argument to do_signal() as it's no longer
           necessary.
      
      This patch depends on the FRV signalling patches as well as the
      sys_rt_sigsuspend patch.
      Signed-off-by: NDavid Howells <dhowells@redhat.com>
      Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      a411aee9
  21. 09 1月, 2006 1 次提交
    • D
      [PATCH] frv: miscellaneous changes · 41be6aef
      David Howells 提交于
      Fix a number of miscellanous items:
      
       (1) Declare lock sections in the linker script.
      
       (2) Recurse in the correct manner in the arch makefile.
      
       (3) asm/bug.h requires asm/linkage.h to be included first. One C file puts
           asm/bug.h first.
      
       (4) Add an empty RTC header file to avoid missing header file errors.
      
       (5) sg_dma_address() should use the dma_address member of a scatter list.
      
       (6) Add trivial pci_unmap support.
      
       (7) Add pgprot_noncached()
      
       (8) Discard u_quad_t.
      
       (9) Use ~0UL rather than ULONG_MAX in unistd.h in case the latter isn't
           declared.
      
      (10) Add an empty VGA header file to avoid missing header file errors.
      
      (11) Add an XOR header file to use the generic XOR stuff.
      Signed-off-by: NDavid Howells <dhowells@redhat.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      41be6aef
  22. 17 4月, 2005 1 次提交
    • L
      Linux-2.6.12-rc2 · 1da177e4
      Linus Torvalds 提交于
      Initial git repository build. I'm not bothering with the full history,
      even though we have it. We can create a separate "historical" git
      archive of that later if we want to, and in the meantime it's about
      3.2GB when imported into git - space that would just make the early
      git days unnecessarily complicated, when we don't have a lot of good
      infrastructure for it.
      
      Let it rip!
      1da177e4