Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
10 个月 前同步成功

通知 149
Star 36
Fork 7
cloud-kernel
cloud-kernel

前往新版Gitcode，体验更适合开发者的 AI 搜索 >>

切换分支/标签
  1. 29 12月, 2018 1 次提交
  3. 04 10月, 2018 1 次提交
  5. 03 10月, 2018 1 次提交
  7. 02 10月, 2018 1 次提交
    • A
      x86/vdso: Fix asm constraints on vDSO syscall fallbacks · 715bd9d1
      由 Andy Lutomirski 提交于 
      The syscall fallbacks in the vDSO have incorrect asm constraints.
They are not marked as writing to their outputs -- instead, they are
marked as clobbering "memory", which is useless.  In particular, gcc
is smart enough to know that the timespec parameter hasn't escaped,
so a memory clobber doesn't clobber it.  And passing a pointer as an
asm *input* does not tell gcc that the pointed-to value is changed.

Add in the fact that the asm instructions weren't volatile, and gcc
was free to omit them entirely unless their sole output (the return
value) is used.  Which it is (phew!), but that stops happening with
some upcoming patches.

As a trivial example, the following code:

void test_fallback(struct timespec *ts)
{
	vdso_fallback_gettime(CLOCK_MONOTONIC, ts);
}

compiles to:

00000000000000c0 <test_fallback>:
  c0:   c3                      retq

To add insult to injury, the RCX and R11 clobbers on 64-bit
builds were missing.

The "memory" clobber is also unnecessary -- no ordering with respect to
other memory operations is needed, but that's going to be fixed in a
separate not-for-stable patch.

Fixes: 2aae950b ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu")
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/2c0231690551989d2fafa60ed0e7b5cc8b403908.1538422295.git.luto@kernel.org
      715bd9d1
  9. 21 8月, 2018 1 次提交
  11. 06 8月, 2018 1 次提交
    • A
      x86: vdso: Use $LD instead of $CC to link · 379d98dd
      由 Alistair Strachan 提交于 
      The vdso{32,64}.so can fail to link with CC=clang when clang tries to find
a suitable GCC toolchain to link these libraries with.

/usr/bin/ld: arch/x86/entry/vdso/vclock_gettime.o:
  access beyond end of merged section (782)

This happens because the host environment leaked into the cross compiler
environment due to the way clang searches for suitable GCC toolchains.

Clang is a retargetable compiler, and each invocation of it must provide
--target=<something> --gcc-toolchain=<something> to allow it to find the
correct binutils for cross compilation. These flags had been added to
KBUILD_CFLAGS, but the vdso code uses CC and not KBUILD_CFLAGS (for various
reasons) which breaks clang's ability to find the correct linker when cross
compiling.

Most of the time this goes unnoticed because the host linker is new enough
to work anyway, or is incompatible and skipped, but this cannot be reliably
assumed.

This change alters the vdso makefile to just use LD directly, which
bypasses clang and thus the searching problem. The makefile will just use
${CROSS_COMPILE}ld instead, which is always what we want. This matches the
method used to link vmlinux.

This drops references to DISABLE_LTO; this option doesn't seem to be set
anywhere, and not knowing what its possible values are, it's not clear how
to convert it from CC to LD flag.
Signed-off-by: NAlistair Strachan <astrachan@google.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NAndy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: kernel-team@android.com
Cc: joel@joelfernandes.org
Cc: Andi Kleen <andi.kleen@intel.com>
Link: https://lkml.kernel.org/r/20180803173931.117515-1-astrachan@google.com
      379d98dd
  13. 18 7月, 2018 1 次提交
  15. 03 7月, 2018 1 次提交
  17. 15 5月, 2018 3 次提交
  19. 06 5月, 2018 1 次提交
  21. 05 5月, 2018 1 次提交
  23. 07 4月, 2018 1 次提交
    • M
      kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers · 54a702f7
      由 Masahiro Yamada 提交于 
      GNU Make automatically deletes intermediate files that are updated
in a chain of pattern rules.

Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
Example 2) %.o <- %.c <- %.c_shipped

A couple of makefiles mark such targets as .PRECIOUS to prevent Make
from deleting them, but the correct way is to use .SECONDARY.

  .SECONDARY
    Prerequisites of this special target are treated as intermediate
    files but are never automatically deleted.

  .PRECIOUS
    When make is interrupted during execution, it may delete the target
    file it is updating if the file was modified since make started.
    If you mark the file as precious, make will never delete the file
    if interrupted.

Both can avoid deletion of intermediate files, but the difference is
the behavior when Make is interrupted; .SECONDARY deletes the target,
but .PRECIOUS does not.

The use of .PRECIOUS is relatively rare since we do not want to keep
partially constructed (possibly corrupted) targets.

Another difference is that .PRECIOUS works with pattern rules whereas
.SECONDARY does not.

  .PRECIOUS: $(obj)/%.lex.c

works, but

  .SECONDARY: $(obj)/%.lex.c

has no effect.  However, for the reason above, I do not want to use
.PRECIOUS which could cause obscure build breakage.

The targets specified as .SECONDARY must be explicit.  $(targets)
contains all targets that need to include .*.cmd files.  So, the
intermediates you want to keep are mostly in there.  Therefore, mark
$(targets) as .SECONDARY.  It means primary targets are also marked
as .SECONDARY, but I do not see any drawback for this.

I replaced some .SECONDARY / .PRECIOUS markers with 'targets'.  This
will make Kbuild search for non-existing .*.cmd files, but this is
not a noticeable performance issue.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NFrank Rowand <frowand.list@gmail.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
      54a702f7
  25. 20 3月, 2018 1 次提交
  27. 07 12月, 2017 1 次提交
    • A
      x86/vdso: Change time() prototype to match __vdso_time() · 88edb57d
      由 Arnd Bergmann 提交于 
      gcc-8 warns that time() is an alias for __vdso_time() but the two
have different prototypes:

  arch/x86/entry/vdso/vclock_gettime.c:327:5: error: 'time' alias between functions of incompatible types 'int(time_t *)' {aka 'int(long int *)'} and 'time_t(time_t *)' {aka 'long int(long int *)'} [-Werror=attribute-alias]
   int time(time_t *t)
       ^~~~
  arch/x86/entry/vdso/vclock_gettime.c:318:16: note: aliased declaration here

I could not figure out whether this is intentional, but I see that
changing it to return time_t avoids the warning.

Returning 'int' from time() is also a bit questionable, as it causes an
overflow in y2038 even on 64-bit architectures that use a 64-bit time_t
type. On 32-bit architecture with 64-bit time_t, time() should always
be implement by the C library by calling a (to be added) clock_gettime()
variant that takes a sufficiently wide argument.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: http://lkml.kernel.org/r/20171204150203.852959-1-arnd@arndb.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
      88edb57d
  29. 16 11月, 2017 1 次提交
    • M
      kbuild: create object directories simpler and faster · 8a78756e
      由 Masahiro Yamada 提交于 
      For the out-of-tree build, scripts/Makefile.build creates output
directories, but this operation is not efficient.

scripts/Makefile.lib calculates obj-dirs as follows:

  obj-dirs := $(dir $(multi-objs) $(obj-y))

Please notice $(sort ...) is not used here.  Usually the result is
as many "./" as objects here.

For a lot of duplicated paths, the following command is invoked.

  _dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))

Then, the costly shell command is run over and over again.

I see many points for optimization:

[1] Use $(sort ...) to cut down duplicated paths before passing them
    to system call
[2] Use single $(shell ...) instead of repeating it with $(foreach ...)
    This will reduce forking.
[3] We can calculate obj-dirs more simply.  Most of objects are already
    accumulated in $(targets).  So, $(dir $(targets)) is fine and more
    comprehensive.

I also removed ugly code in arch/x86/entry/vdso/Makefile.  This is now
really unnecessary.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Tested-by: NDouglas Anderson <dianders@chromium.org>
      8a78756e
  31. 09 11月, 2017 1 次提交
  33. 07 11月, 2017 1 次提交
  35. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      由 Greg Kroah-Hartman 提交于 
      Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  37. 25 10月, 2017 1 次提交
    • M
      locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns... · 6aa7de05
      由 Mark Rutland 提交于 
      locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()

Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.

For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.

However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:

----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()

// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch

virtual patch

@ depends on patch @
expression E1, E2;
@@

- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)

@ depends on patch @
expression E;
@@

- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      6aa7de05
  39. 19 10月, 2017 1 次提交
  41. 29 8月, 2017 1 次提交
    • T
      x86/gdt: Use bitfields for initialization · 38e9e81f
      由 Thomas Gleixner 提交于 
      The GDT entry related code uses two ways to access entries via
union fields:

 - bitfields

 - macros which initialize the two 16-bit parts of the entry
   by magic shift and mask operations.

Clean it up and only use the bitfields to initialize and access entries.

( The old access patterns were partly done due to GCC optimizing bitfield
  accesses in a horrible way - that's mostly fixed these days and clarity
  of code in such low level accessors is very important. )
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20170828064958.197673367@linutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
      38e9e81f
  43. 21 6月, 2017 1 次提交
    • D
      ARM: 8683/1: ARM32: Support mremap() for sigpage/vDSO · 280e87e9
      由 Dmitry Safonov 提交于 
      CRIU restores application mappings on the same place where they
were before Checkpoint. That means, that we need to move vDSO
and sigpage during restore on exactly the same place where
they were before C/R.

Make mremap() code update mm->context.{sigpage,vdso} pointers
during VMA move. Sigpage is used for landing after handling
a signal - if the pointer is not updated during moving, the
application might crash on any signal after mremap().

vDSO pointer on ARM32 is used only for setting auxv at this moment,
update it during mremap() in case of future usage.

Without those updates, current work of CRIU on ARM32 is not reliable.
Historically, we error Checkpointing if we find vDSO page on ARM32
and suggest user to disable CONFIG_VDSO.
But that's not correct - it goes from x86 where signal processing
is ended in vDSO blob. For arm32 it's sigpage, which is not disabled
with `CONFIG_VDSO=n'.

Looks like C/R was working by luck - because userspace on ARM32 at
this moment always sets SA_RESTORER.
Signed-off-by: NDmitry Safonov <dsafonov@virtuozzo.com>
Acked-by: NAndy Lutomirski <luto@amacapital.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Christopher Covington <cov@codeaurora.org>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
      280e87e9
  45. 11 4月, 2017 1 次提交
  47. 16 3月, 2017 1 次提交
    • T
      x86: Remap GDT tables in the fixmap section · 69218e47
      由 Thomas Garnier 提交于 
      Each processor holds a GDT in its per-cpu structure. The sgdt
instruction gives the base address of the current GDT. This address can
be used to bypass KASLR memory randomization. With another bug, an
attacker could target other per-cpu structures or deduce the base of
the main memory section (PAGE_OFFSET).

This patch relocates the GDT table for each processor inside the
fixmap section. The space is reserved based on number of supported
processors.

For consistency, the remapping is done by default on 32 and 64-bit.

Each processor switches to its remapped GDT at the end of
initialization. For hibernation, the main processor returns with the
original GDT and switches back to the remapping at completion.

This patch was tested on both architectures. Hibernation and KVM were
both tested specially for their usage of the GDT.

Thanks to Boris Ostrovsky <boris.ostrovsky@oracle.com> for testing and
recommending changes for Xen support.
Signed-off-by: NThomas Garnier <thgarnie@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Luis R . Rodriguez <mcgrof@kernel.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Rafael J . Wysocki <rjw@rjwysocki.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: kasan-dev@googlegroups.com
Cc: kernel-hardening@lists.openwall.com
Cc: kvm@vger.kernel.org
Cc: lguest@lists.ozlabs.org
Cc: linux-doc@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-pm@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Cc: zijun_hu <zijun_hu@htc.com>
Link: http://lkml.kernel.org/r/20170314170508.100882-2-thgarnie@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      69218e47
  49. 11 3月, 2017 1 次提交
  51. 02 3月, 2017 1 次提交
  53. 25 2月, 2017 1 次提交
  55. 25 12月, 2016 2 次提交
  57. 15 12月, 2016 1 次提交
  59. 28 10月, 2016 1 次提交
    • D
      x86/vdso: Set vDSO pointer only after success · 67dece7d
      由 Dmitry Safonov 提交于 
      Those pointers were initialized before call to _install_special_mapping()
after the commit:

  f7b6eb3f ("x86: Set context.vdso before installing the mapping")

This is not required anymore as special mappings have their vma name and
don't use arch_vma_name() after commit:

  a62c34bd ("x86, mm: Improve _install_special_mapping and fix x86 vdso naming")

So, this way to init looks less entangled.

I even belive that we can remove NULL initializers:

 - on failure load_elf_binary() will not start a new thread;
 - arch_prctl will have the same pointers as before syscall.
Signed-off-by: NDmitry Safonov <dsafonov@virtuozzo.com>
Acked-by: NAndy Lutomirski <luto@kernel.org>
Cc: 0x7f454c46@gmail.com
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Cc: oleg@redhat.com
Link: http://lkml.kernel.org/r/20161027141516.28447-3-dsafonov@virtuozzo.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      67dece7d
  61. 30 9月, 2016 1 次提交
  63. 20 9月, 2016 1 次提交
    • P
      KVM: x86: introduce get_kvmclock_ns · 108b249c
      由 Paolo Bonzini 提交于 
      Introduce a function that reads the exact nanoseconds value that is
provided to the guest in kvmclock.  This crystallizes the notion of
kvmclock as a thin veneer over a stable TSC, that the guest will
(hopefully) convert with NTP.  In other words, kvmclock is *not* a
paravirtualized host-to-guest NTP.

Drop the get_kernel_ns() function, that was used both to get the base
value of the master clock and to get the current value of kvmclock.
The former use is replaced by ktime_get_boot_ns(), the latter is
the purpose of get_kernel_ns().

This also allows KVM to provide a Hyper-V time reference counter that
is synchronized with the time that is computed from the TSC page.
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      108b249c
  65. 15 9月, 2016 4 次提交
  67. 04 8月, 2016 1 次提交