The struct class_device *dev_class is not used in the struct drm_head
structure at all, so remove it as class_device is being removed entirely
from the kernel.


Cc: David Airlie <airlied@linux.ie>
Cc: Tony Jones <tonyj@suse.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This sets us up to be able to convert the srp_host to use a struct
device instead of a class_device.

Based on a original patch from Tony Jones, but split up into this piece
by Greg.
Signed-off-by: NTony Jones <tonyj@suse.de>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Reviewed-by: NRoland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This converts the main ib_device to use struct device instead of struct
class_device as class_device is going away.
Signed-off-by: NTony Jones <tonyj@suse.de>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

struct class_device is going away, struct device should be used instead.
Signed-off-by: NTony Jones <tonyj@suse.de>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Cc: Alex Dubov <oakad@yahoo.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Requiring userspace to close and re-open sysfs attributes has been the
policy since before 2.6.12.  It allows userspace to get a consistent
snapshot of kernel state and consume it with incremental reads and seeks.

Now, if the file position is zero the kernel assumes userspace wants to see
the new value.  The application for this change is to allow a userspace
RAID metadata handler to check the state of an array without causing any
memory allocations.  Thus not causing writeback to a raid array that might
be blocked waiting for userspace to take action.

Cc: Neil Brown <neilb@suse.de>
Acked-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

After 2.6.24 there was a plan to make the PM core acquire all device
semaphores during a suspend/hibernation to protect itself from
concurrent operations involving device objects.  That proved to be
too heavy-handed and we found a better way to achieve the goal, but
before it happened, we had introduced the functions
device_pm_schedule_removal() and destroy_suspended_device() to allow
drivers to "safely" destroy a suspended device and we had adapted some
drivers to use them.  Now that these functions are no longer necessary,
it seems reasonable to remove them and modify their users to use the
normal device unregistration instead.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add /sysfs/firmware/ibft/[initiator|targetX|ethernetX] directories along with
text properties which export the the iSCSI Boot Firmware Table (iBFT)
structure.

What is iSCSI Boot Firmware Table?  It is a mechanism for the iSCSI tools to
extract from the machine NICs the iSCSI connection information so that they
can automagically mount the iSCSI share/target.  Currently the iSCSI
information is hard-coded in the initrd.  The /sysfs entries are read-only
one-name-and-value fields.

The usual set of data exposed is:

# for a in `find /sys/firmware/ibft/ -type f -print`; do  echo -n "$a: ";  cat $a; done
/sys/firmware/ibft/target0/target-name: iqn.2007.com.intel-sbx44:storage-10gb
/sys/firmware/ibft/target0/nic-assoc: 0
/sys/firmware/ibft/target0/chap-type: 0
/sys/firmware/ibft/target0/lun: 00000000
/sys/firmware/ibft/target0/port: 3260
/sys/firmware/ibft/target0/ip-addr: 192.168.79.116
/sys/firmware/ibft/target0/flags: 3
/sys/firmware/ibft/target0/index: 0
/sys/firmware/ibft/ethernet0/mac: 00:11:25:9d:8b:01
/sys/firmware/ibft/ethernet0/vlan: 0
/sys/firmware/ibft/ethernet0/gateway: 192.168.79.254
/sys/firmware/ibft/ethernet0/origin: 0
/sys/firmware/ibft/ethernet0/subnet-mask: 255.255.252.0
/sys/firmware/ibft/ethernet0/ip-addr: 192.168.77.41
/sys/firmware/ibft/ethernet0/flags: 7
/sys/firmware/ibft/ethernet0/index: 0
/sys/firmware/ibft/initiator/initiator-name: iqn.2007-07.com:konrad.initiator
/sys/firmware/ibft/initiator/flags: 3
/sys/firmware/ibft/initiator/index: 0

For full details of the IBFT structure please take a look at:
ftp://ftp.software.ibm.com/systems/support/system_x_pdf/ibm_iscsi_boot_firmware_table_v1.02.pdf

[akpm@linux-foundation.org: fix build]
Signed-off-by: NKonrad Rzeszutek <konradr@linux.vnet.ibm.com>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Peter Jones <pjones@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Source file was removed.  Need to remove docbook reference also.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Pavel Machek <pavel@suse.cz>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use the more concise list_for_each_entry(), which allows for the
deletion of the to_kobj() routine at the same time.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

After an experimental deletion of the unnecessary inclusion of
<linux/slab.h> from the header file <linux/percpu.h>, the following
files under fs/sysfs were exposed as needing to explicitly include
<linux/slab.h>.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

device_is_registered() can use the kobject value for this, so it will
now work with devices that are associated with only a class, not a bus
and a driver.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1058) improves the wakeup macros in include/linux/pm.h.
All but the trivial ones are converted to inline routines, which
requires moving them to a separate header file since they depend on
the definition of struct device.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The various wakeup flags and their accessor macros in struct
dev_pm_info should be available whenever CONFIG_PM is enabled, not
just when CONFIG_PM_SLEEP is on.  Otherwise remote wakeup won't always
be configurable for runtime power management.  This patch (as1056b)
fixes the oversight.

David Brownell adds:
	More accurately, fixes the "regression" ... as noted sometime
	last summer, after 296699de
	introduced CONFIG_SUSPEND.  But that didn't make the regression
	list for that kernel, ergo the delay in fixing it.

[rjw: rebased]
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1059) fixes a mistake in the way the serial core
initializes a device's wakeup settings.  It should use the accessor
routine instead of relying on a macro producing an lvalue.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Include dpm_sysfs_add() into device_pm_add(), in analogy with
device_pm_remove(), and modify device_add() to call the latter after
bus_add_device(), to avoid situations in which the PM core may
attempt to suspend a device the registration of which has not been
successful.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Modify the PM core to protect its data structures, specifically the
dpm_active list, from being corrupted if a child of the currently
suspending device is registered concurrently with its ->suspend()
callback.  In that case, since the new device (the child) is added
to dpm_active after its parent, the PM core will attempt to
suspend it after the parent, which is wrong.

Introduce a new member of struct dev_pm_info, called 'sleeping',
and use it to check if the parent of the device being added to
dpm_active has been suspended, in which case the device registration
fails.  Also, use 'sleeping' for checking if the ordering of devices
on dpm_active is correct.

Introduce variable 'all_sleeping' that will be set to 'true' once all
devices have been suspended and make new device registrations fail
until 'all_sleeping' is reset to 'false', in order to avoid having
unsuspended devices around while the system is going into a sleep state.

Remove pm_sleep_rwsem which is not necessary any more.

Special thanks to Alan Stern for discussions and suggestions that
lead to the creation of this patch.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Userspace likes to get notified that the disk may have changed, when
rescan_partitions() is called after partitioning or media change. It will
make it possible to update the state of the disk with the "change" event,
before the following partition "add" events are handled.

Cc: David Zeuthen <david@fubar.dk>
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I've just found how easy it is to accidentally register a sysdev_driver for
two different classes.  When this happens, bad things happen as the
sysdev_driver structure keeps has the list entry for the driver
registration.

The following patch makes a WARN_ON() if this happens, although I think
BUG_ON or returning -EAGAIN could also be valid responses to this.
Signed-off-by: NBen Dooks <ben@fluff.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix following warning:
WARNING: vmlinux.o(.text+0x64609c): Section mismatch in reference from the function store_online() to the function .cpuinit.text:cpu_up()

store_online() is defined inside a HOTPLUG_CPU block so references are OK. 
Ignore references by annotating store_online() with __ref.

Note: This is needed because cpu_up() most likely should not have been
__cpuinit but all the hotplug cpu code misuses the __cpuinit annotation.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

power_state is scheduled for removal, and it is used only for debug
prints by driver core. Remove it.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The current PNP combined card + devices module aliase can
never ever match anything, because these values are not available
all at the same time to request a module.

Instead of adding the combined alias, we add the device id's
all as individual aliases. Device id's are exported by the PNP
bus and can now properly used to request the loading of a
matching module.

The module snd-sbawe currently exports aliases, which can never
match anything:
  alias: pnp:cCTLXXXXdCTL0045dCTL0022*
  alias: pnp:cCTLXXXXdCTL0044dCTL0023*
  alias: pnp:cCTLXXXXdCTL0042dCTL0022*
  alias: pnp:cCTLXXXXdCTL0041dCTL0021*
  alias: pnp:cCTLXXXXdCTL0031dCTL0021*
  alias: pnp:cCTL00eddCTL0041dCTL0070*
  alias: pnp:cCTL00e9dCTL0045dCTL0022*
  alias: pnp:cCTL00e4dCTL0045dCTL0022*
  alias: pnp:cCTL00c7dCTL0045dCTL0022*
  alias: pnp:cCTL00c5dCTL0045dCTL0022*
  alias: pnp:cCTL00c3dCTL0045dCTL0022*
  alias: pnp:cCTL00c1dCTL0042dCTL0022*
  alias: pnp:cCTL00b2dCTL0044dCTL0023*
  alias: pnp:cCTL009edCTL0044dCTL0023*
  alias: pnp:cCTL009ddCTL0042dCTL0022*
  alias: pnp:cCTL009fdCTL0041dCTL0021*
  alias: pnp:cCTL009cdCTL0041dCTL0021*
  alias: pnp:cCTL009adCTL0041dCTL0021*
  alias: pnp:cCTL0054dCTL0031dCTL0021*
  alias: pnp:cCTL0048dCTL0031dCTL0021*
  alias: pnp:cCTL0047dCTL0031dCTL0021*
  alias: pnp:cCTL0046dCTL0031dCTL0021*
  alias: pnp:cCTL0045dCTL0031dCTL0021*
  alias: pnp:cCTL0044dCTL0031dCTL0021*
  alias: pnp:cCTL0043dCTL0031dCTL0021*
  alias: pnp:cCTL0042dCTL0031dCTL0021*
  alias: pnp:cCTL0039dCTL0031dCTL0021*
  alias: pnp:cCTL0035dCTL0031dCTL0021*

With this patch it exports only the device id's, as properly
matchable aliases:
  alias: pnp:dCTL0070*
  alias: pnp:dCTL0045*
  alias: pnp:dCTL0023*
  alias: pnp:dCTL0044*
  alias: pnp:dCTL0022*
  alias: pnp:dCTL0042*
  alias: pnp:dCTL0041*
  alias: pnp:dCTL0021*
  alias: pnp:dCTL0031*

Now, the exported value of the PNP bus can be used to autoload
a matching module:
  $ modprobe --first-time -n -v pnp:dCTL0045
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-rawmidi.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/core/snd-hwdep.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb-common.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-csp.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sb16-dsp.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/drivers/opl3/snd-opl3-lib.ko
  insmod /lib/modules/2.6.24-rc6-g5b825ed2-dirty/kernel/sound/isa/sb/snd-sbawe.ko

  $ grep CTL0045 /sys/bus/pnp/devices/*/id
  /sys/bus/pnp/devices/01:01.00/id:CTL0045
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This fixes up a number of coding style issues in the firmware sample files.

Yeah, it still doesn't build properly yet, that's next...


Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move the firmware_class sample drivers to samples/ so that they are
buildable and can be maintained.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Convert sysfs_remove_bin_file() to have a return type of 'void' for
!CONFIG_SYSFS configurations.  Also removes unnecessary colons from empty
void functions.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Reviewed-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

driver core: Convert debug functions declared inline __attribute__((format (printf,x,y) to statement expression macros

When DEBUG is not defined, pr_debug and dev_dbg and some
other local debugging functions are specified as:

"inline __attribute__((format (printf, x, y)))"

This is done to validate printk arguments when not debugging.

Converting these functions to macros or statement expressions
"do { if (0) printk(fmt, ##arg); } while (0)"
or
"({ if (0) printk(fmt, ##arg); 0; })
makes at least gcc 4.2.2 produce smaller objects.

This has the additional benefit of allowing the optimizer to
avoid calling functions like print_mac that might have been
arguments to the printk.

defconfig x86 current:

$ size vmlinux
   text    data     bss     dec     hex filename
4716770  474560  618496 5809826  58a6a2 vmlinux

all converted: (More patches follow)

$ size vmlinux
   text    data     bss     dec     hex filename
4716642  474560  618496 5809698  58a622 vmlinux

Even kernel/sched.o, which doesn't even use these
functions, becomes smaller.

It appears that merely having an indirect include
of <linux/device.h> can cause bigger objects.

$ size sched.inline.o sched.if0.o
   text    data     bss     dec     hex filename
  31385    2854     328   34567    8707 sched.inline.o
  31366    2854     328   34548    86f4 sched.if0.o

The current preprocessed only kernel/sched.i file contains:

# 612 "include/linux/device.h"
static inline __attribute__((always_inline)) int __attribute__ ((format (printf, 2, 3)))
dev_dbg(struct device *dev, const char *fmt, ...)
{
 return 0;
}
# 628 "include/linux/device.h"
static inline __attribute__((always_inline)) int __attribute__ ((format (printf, 2, 3)))
dev_vdbg(struct device *dev, const char *fmt, ...)
{
 return 0;
}

Removing these unused inlines from sched.i shrinks sched.o
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

register_memory()/unregister_memory() never gets called with
"root". unregister_memory() is accessing kobject_name of
the object just freed up. Since no one uses the code,
lets take the code out. And also, make register_memory() static.

Another bug fix - before calling unregister_memory()
remove_memory_block() gets a ref on kobject. unregister_memory()
need to drop that ref before calling sysdev_unregister().
Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NDaniel Walker <dwalker@mvista.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Otherwise the device might just disappear while /dev/uioX is being used
which results in an Oops.
Signed-off-by: NUwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: NHans J Koch <hjk@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch implements a UIO interface for the SMX Cryptengine.

The Cryptengine found on the Nias Digital SMX board is best suited
for a UIO interface.  It is not wired in to the cryptographic API
as the engine handles it's own keys, algorithms, everything.  All
that we know about is that if there's room in the buffer, you can
write data to it and when there's data ready, you read it out again.

There isn't necessarily even any direct correlation between data
going in and data coming out again, the engine may consume or
generate data all on its own.

This driver is for proprietary hardware but we're always told to
submit the drivers anyway; here you are.  :-)

This is version 4 of this patch and addresses all issues raised by
Hans-Jürgen Koch and Paul Mundt in their reviews.  Slightly altered
is Paul's suggestion to use DRV_NAME and DRV_VERSION as the UIO
version and name.  While at the moment they are the same, there
is no reason for them to stay that way.  Nevertheless we now at
least provide a MODULE_VERSION macro to keep modinfo happy.
Signed-off-by: NBen Nizette <bn@niasdigital.com>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Signed-off-by: NHans J Koch <hjk@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Meanwhile, PCI_DEVICE_ID_PLX_9030 is defined in pci_ids.h, no need to
define it again in the driver.
Signed-off-by: NHans J. Koch <hjk@linutronix.de>
CC: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Source drivers/uio/Kconfig to make UIO available in menuconfig if ARCH=arm.
Signed-off-by: NHans J Koch <hjk@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NHans J. Koch <hjk@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NDenis Cheng <crquan@gmail.com>
Signed-off-by: NHans J. Koch <hjk@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add warnings to kobject_put() to catch kobjects that are cleaned up but
were never initialized to begin with.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  security: fix up documentation for security_module_enable
  Security: Introduce security= boot parameter
  Audit: Final renamings and cleanup
  SELinux: use new audit hooks, remove redundant exports
  Audit: internally use the new LSM audit hooks
  LSM/Audit: Introduce generic Audit LSM hooks
  SELinux: remove redundant exports
  Netlink: Use generic LSM hook
  Audit: use new LSM hooks instead of SELinux exports
  SELinux: setup new inode/ipc getsecid hooks
  LSM: Introduce inode_getsecid and ipc_getsecid hooks

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits)
  [NET]: Fix and allocate less memory for ->priv'less netdevices
  [IPV6]: Fix dangling references on error in fib6_add().
  [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found
  [PKT_SCHED]: Fix datalen check in tcf_simp_init().
  [INET]: Uninline the __inet_inherit_port call.
  [INET]: Drop the inet_inherit_port() call.
  SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked.
  [netdrvr] forcedeth: internal simplifications; changelog removal
  phylib: factor out get_phy_id from within get_phy_device
  PHY: add BCM5464 support to broadcom PHY driver
  cxgb3: Fix __must_check warning with dev_dbg.
  tc35815: Statistics cleanup
  natsemi: fix MMIO for PPC 44x platforms
  [TIPC]: Cleanup of TIPC reference table code
  [TIPC]: Optimized initialization of TIPC reference table
  [TIPC]: Remove inlining of reference table locking routines
  e1000: convert uint16_t style integers to u16
  ixgb: convert uint16_t style integers to u16
  sb1000.c: make const arrays static
  sb1000.c: stop inlining largish static functions
  ...

security_module_enable() can only be called during kernel init.
Signed-off-by: NJames Morris <jmorris@namei.org>

Add the security= boot parameter. This is done to avoid LSM
registration clashes in case of more than one bult-in module.

User can choose a security module to enable at boot. If no
security= boot parameter is specified, only the first LSM
asking for registration will be loaded. An invalid security
module name will be treated as if no module has been chosen.

LSM modules must check now if they are allowed to register
by calling security_module_enable(ops) first. Modify SELinux
and SMACK to do so.

Do not let SMACK register smackfs if it was not chosen on
boot. Smackfs assumes that smack hooks are registered and
the initial task security setup (swapper->security) is done.
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>

Rename the se_str and se_rule audit fields elements to
lsm_str and lsm_rule to avoid confusion.
Signed-off-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com>
Acked-by: NJames Morris <jmorris@namei.org>