[ Upstream commit 1b451fb2051b464b9758c09a3492104403252e2b ]

The mvpp2_phylink_validate() sets all modes that are supported by a
given PPv2 port. An mistake made the 10000baseT_Full mode being
advertised in some cases when a port wasn't configured to perform at
10G. This patch fixes this.

Fixes: d97c9f4a ("net: mvpp2: 1000baseX support")
Reported-by: NRussell King <linux@armlinux.org.uk>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e1c15b62b7015119d3e5915cd2ae3b89d59c2576 ]

Add check of MPWQE stride size is within range supported by HW. In case
calculated MPWQE stride size exceed range, linear SKB can't be used and
we should use non linear MPWQE instead.

Fixes: 619a8f2a ("net/mlx5e: Use linear SKB in Striding RQ")
Signed-off-by: NMoshe Shemesh <moshe@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fa2bf86bab4bbc61e5678a42a14e40075093a98f ]

TXQ SQ closure is followed by closing the corresponding CQ. A pending
DIM work would try to modify the now non-existing CQ.
This would trigger an error:
[85535.835926] mlx5_core 0000:af:00.0: mlx5_cmd_check:769:(pid 124399):
MODIFY_CQ(0x403) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1d7771)

Fix by making sure to cancel any pending DIM work before destroying the SQ.

Fixes: cbce4f44 ("net/mlx5e: Enable adaptive-TX moderation")
Signed-off-by: NTal Gilboa <talgi@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8fd1a4affbdafda592f80cd01bf7a382a5ff2fe8 ]

The MAC table in Ocelot supports auto aging (normal) and static entries.
MAC entries that is manually configured should be static and not subject
to aging.

Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: NAllan Nielsen <allan.nielsen@microchip.com>
Reviewed-by: NSteen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: NSteen Hegelund <steen.hegelund@microchip.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7adf3246092f5e87ed0fa610e8088fae416c581f ]

In ip6_neigh_lookup(), we must not return errors coming from
neigh_create(): if creation of a neighbour entry fails, the lookup should
return NULL, in the same way as it's done in __neigh_lookup().

Otherwise, callers legitimately checking for a non-NULL return value of
the lookup function might dereference an invalid pointer.

For instance, on neighbour table overflow, ndisc_router_discovery()
crashes ndisc_update() by passing ERR_PTR(-ENOBUFS) as 'neigh' argument.
Reported-by: NJianlin Shi <jishi@redhat.com>
Fixes: f8a1b43b ("net/ipv6: Create a neigh_lookup for FIB entries")
Signed-off-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 290974d434783624c13a9530a23c45f9c5ffe018 ]

Previously we did not ensure tcp flags have a place to be stored
when using IPv6. We correct this by including IPv6 key layer when
we match tcp flags and the IPv6 key layer has not been included
already.

Fixes: 07e1671c ("nfp: flower: refactor shared ip header in match offload")
Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 178fe94405bffbd1acd83b6ff3b40211185ae9c9 ]

'ipv6_find_idev()' returns NULL on error, not an error pointer.
Update the test accordingly and return -ENOBUFS, as already done in
'addrconf_add_dev()', if NULL is returned.

Fixes: ("ipv6: allow userspace to add IFA_F_OPTIMISTIC addresses")
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d15f5ac8deea936d3adf629421a66a88b42b8a2f ]

It was reported that IPsec would crash when it encounters an IPv6
reassembled packet because skb->sk is non-zero and not a valid
pointer.

This is because skb->sk is now a union with ip_defrag_offset.

This patch fixes this by resetting skb->sk when exiting from
the reassembly code.
Reported-by: NXiumei Mu <xmu@redhat.com>
Fixes: 219badfa ("ipv6: frags: get rid of ip6frag_skb_cb/...")
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4765420439e758bfa4808392d18b0a4cb6f06065 ]

mlx5 driver falsely advertises support of software timestamping.
Fix it by removing the false indication.

Fixes: ef9814de ("net/mlx5e: Add HW timestamping (TS) support")
Signed-off-by: NAlaa Hleihel <alaa@mellanox.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3c6306d44082ef007a258ae1b86ea58e6974ee3f ]

Similar to commit 143ece654f9f ("tipc: check tsk->group in tipc_wait_for_cond()")
we have to reload grp->dests too after we re-take the sock lock.
This means we need to move the dsts check after tipc_wait_for_cond()
too.

Fixes: 75da2163 ("tipc: introduce communication groups")
Reported-and-tested-by: syzbot+99f20222fc5018d2b97a@syzkaller.appspotmail.com
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f0337889147c956721696553ffcc97212b0948fe ]

Expression terminated with "," instead of ";", resulted in
set_fte getting bad value for modify_enable_mask field.

Fixes: bd5251db ("net/mlx5_core: Introduce flow steering destination of type counter")
Signed-off-by: NYuval Avnery <yuvalav@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d81c5054a5d1d4999c7cdead7636b6cd4af83d36 ]

At least old Xen net backends seem to send frags with no real data
sometimes. In case such a fragment happens to occur with the frag limit
already reached the frontend will BUG currently even if this situation
is easily recoverable.

Modify the BUG_ON() condition accordingly.
Tested-by: NDietmar Hahn <dietmar.hahn@ts.fujitsu.com>
Signed-off-by: NJuergen Gross <jgross@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a915b982d8f5e4295f64b8dd37ce753874867e88 ]

If a server side socket is bound to an address, but not in the listening
state yet, incoming connection requests should receive a reset control
packet in response. However, the function used to send the reset
silently drops the reset packet if the sending socket isn't bound
to a remote address (as is the case for a bound socket not yet in
the listening state). This change fixes this by using the src
of the incoming packet as destination for the reset packet in
this case.

Fixes: d021c344 ("VSOCK: Introduce VM Sockets")
Reviewed-by: NAdit Ranadive <aditr@vmware.com>
Reviewed-by: NVishnu Dasa <vdasa@vmware.com>
Signed-off-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 841df922417eb82c835e93d4b93eb6a68c99d599 ]

We miss a write barrier that guarantees used idx is updated and seen
before log. This will let userspace sync and copy used ring before
used idx is update. Fix this by adding a barrier before log_write().

Fixes: 8dd014ad ("vhost-net: mergeable buffers support")
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 15ef70e286176165d28b0b8a969b422561a68dfc ]

lock_sock() must be used in process context to be race-free with
other lock_sock() callers, for example, tipc_release(). Otherwise
using the spinlock directly can't serialize a parallel tipc_release().

As it is blocking, we have to hold the sock refcnt before
rhashtable_walk_stop() and release it after rhashtable_walk_start().

Fixes: 07f6c4bc ("tipc: convert tipc reference table to use generic rhashtable")
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit acb4a33e9856d5fa3384b87d3d8369229be06d31 ]

tipc_udp_xmit() drops the packet on error, there is no
need to drop it again.

Fixes: ef20cd4d ("tipc: introduce UDP replicast")
Reported-and-tested-by: syzbot+eae585ba2cc2752d3704@syzkaller.appspotmail.com
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit dc4501ff287547dea7ca10f1c580c741291a8760 ]

bearer_disable() already calls kfree_rcu() to free struct tipc_bearer,
we don't need to call kfree() again.

Fixes: cb30a633 ("tipc: refactor function tipc_enable_bearer()")
Reported-by: syzbot+b981acf1fb240c0c128b@syzkaller.appspotmail.com
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fb83ed496b9a654f60cd1d58a0e1e79ec5694808 ]

When TIPC_NLA_UDP_REMOTE is an IPv6 mcast address but
TIPC_NLA_UDP_LOCAL is an IPv4 address, a NULL-ptr deref is triggered
as the UDP tunnel sock is initialized to IPv4 or IPv6 sock merely
based on the protocol in local address.

We should just error out when the remote address and local address
have different protocols.

Reported-by: syzbot+eb4da3a20fad2e52555d@syzkaller.appspotmail.com
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 143ece654f9f5b37bedea252a990be37e48ae3a5 ]

tipc_wait_for_cond() drops socket lock before going to sleep,
but tsk->group could be freed right after that release_sock().
So we have to re-check and reload tsk->group after it wakes up.

After this patch, tipc_wait_for_cond() returns -ERESTARTSYS when
tsk->group is NULL, instead of continuing with the assumption of
a non-NULL tsk->group.

(It looks like 'dsts' should be re-checked and reloaded too, but
it is a different bug.)

Similar for tipc_send_group_unicast() and tipc_send_group_anycast().

Reported-by: syzbot+10a9db47c3a0e13eb31c@syzkaller.appspotmail.com
Fixes: b7d42635 ("tipc: introduce flow control for group broadcast messages")
Fixes: ee106d7f ("tipc: introduce group anycast messaging")
Fixes: 27bd9ec0 ("tipc: introduce group unicast messaging")
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f0c928d878e7d01b613c9ae5c971a6b1e473a938 ]

Alexei reported use after frees in inet_diag_dump_icsk() [1]

Because we use refcount_set() when various sockets are setup and
inserted into ehash, we also need to make sure inet_diag_dump_icsk()
wont race with the refcount_set() operations.

Jonathan Lemon sent a patch changing net_twsk_hashdance() but
other spots would need risky changes.

Instead, fix inet_diag_dump_icsk() as this bug came with
linux-4.10 only.

[1] Quoting Alexei :

First something iterating over sockets finds already freed tw socket:

refcount_t: increment on 0; use-after-free.
WARNING: CPU: 2 PID: 2738 at lib/refcount.c:153 refcount_inc+0x26/0x30
RIP: 0010:refcount_inc+0x26/0x30
RSP: 0018:ffffc90004c8fbc0 EFLAGS: 00010282
RAX: 000000000000002b RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88085ee9d680 RSI: ffff88085ee954c8 RDI: ffff88085ee954c8
RBP: ffff88010ecbd2c0 R08: 0000000000000000 R09: 000000000000174c
R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8806ba9bf210 R14: ffffffff82304600 R15: ffff88010ecbd328
FS:  00007f81f5a7d700(0000) GS:ffff88085ee80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f81e2a95000 CR3: 000000069b2eb006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 inet_diag_dump_icsk+0x2b3/0x4e0 [inet_diag]  // sock_hold(sk); in net/ipv4/inet_diag.c:1002
 ? kmalloc_large_node+0x37/0x70
 ? __kmalloc_node_track_caller+0x1cb/0x260
 ? __alloc_skb+0x72/0x1b0
 ? __kmalloc_reserve.isra.40+0x2e/0x80
 __inet_diag_dump+0x3b/0x80 [inet_diag]
 netlink_dump+0x116/0x2a0
 netlink_recvmsg+0x205/0x3c0
 sock_read_iter+0x89/0xd0
 __vfs_read+0xf7/0x140
 vfs_read+0x8a/0x140
 SyS_read+0x3f/0xa0
 do_syscall_64+0x5a/0x100

then a minute later twsk timer fires and hits two bad refcnts
for this freed socket:

refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 31 PID: 0 at lib/refcount.c:228 refcount_dec+0x2e/0x40
Modules linked in:
RIP: 0010:refcount_dec+0x2e/0x40
RSP: 0018:ffff88085f5c3ea8 EFLAGS: 00010296
RAX: 000000000000002c RBX: ffff88010ecbd2c0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000003f
RBP: ffffc90003c77280 R08: 0000000000000000 R09: 00000000000017d3
R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: ffffffff82ad2d80
R13: ffffffff8182de00 R14: ffff88085f5c3ef8 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fbe42685250 CR3: 0000000002209001 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 inet_twsk_kill+0x9d/0xc0  // inet_twsk_bind_unhash(tw, hashinfo);
 call_timer_fn+0x29/0x110
 run_timer_softirq+0x36b/0x3a0

refcount_t: underflow; use-after-free.
WARNING: CPU: 31 PID: 0 at lib/refcount.c:187 refcount_sub_and_test+0x46/0x50
RIP: 0010:refcount_sub_and_test+0x46/0x50
RSP: 0018:ffff88085f5c3eb8 EFLAGS: 00010296
RAX: 0000000000000026 RBX: ffff88010ecbd2c0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000003f
RBP: ffff88010ecbd358 R08: 0000000000000000 R09: 000000000000185b
R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: ffff88010ecbd358
R13: ffffffff8182de00 R14: ffff88085f5c3ef8 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fbe42685250 CR3: 0000000002209001 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 inet_twsk_put+0x12/0x20  // inet_twsk_put(tw);
 call_timer_fn+0x29/0x110
 run_timer_softirq+0x36b/0x3a0

Fixes: 67db3e4b ("tcp: no longer hold ehash lock while calling tcp_get_info()")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NAlexei Starovoitov <ast@kernel.org>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: NJonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3a0ed3e9619738067214871e9cb826fa23b2ddb9 ]

Al Viro mentioned (Message-ID
<20170626041334.GZ10672@ZenIV.linux.org.uk>)
that there is probably a race condition
lurking in accesses of sk_stamp on 32-bit machines.

sock->sk_stamp is of type ktime_t which is always an s64.
On a 32 bit architecture, we might run into situations of
unsafe access as the access to the field becomes non atomic.

Use seqlocks for synchronization.
This allows us to avoid using spinlocks for readers as
readers do not need mutual exclusion.

Another approach to solve this is to require sk_lock for all
modifications of the timestamps. The current approach allows
for timestamps to have their own lock: sk_stamp_lock.
This allows for the patch to not compete with already
existing critical sections, and side effects are limited
to the paths in the patch.

The addition of the new field maintains the data locality
optimizations from
commit 9115e8cd ("net: reorganize struct sock for better data
locality")

Note that all the instances of the sk_stamp accesses
are either through the ioctl or the syscall recvmsg.
Signed-off-by: NDeepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4a2eb0c37b4759416996fbb4c45b932500cf06d3 ]

syzbot reported a kernel-infoleak, which is caused by an uninitialized
field(sin6_flowinfo) of addr->a.v6 in sctp_inet6addr_event().
The call trace is as below:

  BUG: KMSAN: kernel-infoleak in _copy_to_user+0x19a/0x230 lib/usercopy.c:33
  CPU: 1 PID: 8164 Comm: syz-executor2 Not tainted 4.20.0-rc3+ #95
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
  Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x32d/0x480 lib/dump_stack.c:113
    kmsan_report+0x12c/0x290 mm/kmsan/kmsan.c:683
    kmsan_internal_check_memory+0x32a/0xa50 mm/kmsan/kmsan.c:743
    kmsan_copy_to_user+0x78/0xd0 mm/kmsan/kmsan_hooks.c:634
    _copy_to_user+0x19a/0x230 lib/usercopy.c:33
    copy_to_user include/linux/uaccess.h:183 [inline]
    sctp_getsockopt_local_addrs net/sctp/socket.c:5998 [inline]
    sctp_getsockopt+0x15248/0x186f0 net/sctp/socket.c:7477
    sock_common_getsockopt+0x13f/0x180 net/core/sock.c:2937
    __sys_getsockopt+0x489/0x550 net/socket.c:1939
    __do_sys_getsockopt net/socket.c:1950 [inline]
    __se_sys_getsockopt+0xe1/0x100 net/socket.c:1947
    __x64_sys_getsockopt+0x62/0x80 net/socket.c:1947
    do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
    entry_SYSCALL_64_after_hwframe+0x63/0xe7

sin6_flowinfo is not really used by SCTP, so it will be fixed by simply
setting it to 0.

The issue exists since very beginning.
Thanks Alexander for the reproducer provided.

Reported-by: syzbot+ad5d327e6936a2e284be@syzkaller.appspotmail.com
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7c3db4105ce8d69bcb5c04bfa9acd1e9119af8d5 ]

Added support for Fibocom NL678 series cellular module QMI interface.
Using QMI_QUIRK_SET_DTR required for Qualcomm MDM9x40 series chipsets.
Signed-off-by: NJörgen Storvist <jorgen.storvist@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1986af16e8ed355822600c24b3d2f0be46b573df ]

Added support for the Telit LN940 series cellular modules QMI interface.
QMI_QUIRK_SET_DTR quirk requied for Qualcomm MDM9x40 chipset.
Signed-off-by: NJörgen Storvist <jorgen.storvist@gmail.com>
Acked-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 110a1cc28bc383adb4885eff27e18c61ddebffb4 ]

Added support for Fibocom NL668 series QMI interface.
Using QMI_QUIRK_SET_DTR required for Qualcomm MDM9x07 chipsets.
Signed-off-by: NJörgen Storvist <jorgen.storvist@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit aff6db454599d62191aabc208930e891748e4322 ]

__ptr_ring_swap_queue() tries to move pointers from the old
ring to the new one, but it forgets to check if ->producer
is beyond the new size at the end of the operation. This leads
to an out-of-bound access in __ptr_ring_produce() as reported
by syzbot.

Reported-by: syzbot+8993c0fa96d57c399735@syzkaller.appspotmail.com
Fixes: 5d49de53 ("ptr_ring: resize support")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6b8d95f1795c42161dc0984b6863e95d6acf24ed ]

Validate packet socket address length if a length is given. Zero
length is equivalent to not setting an address.

Fixes: 99137b7888f4 ("packet: validate address length")
Reported-by: NIdo Schimmel <idosch@idosch.org>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 99137b7888f4058087895d035d81c6b2d31015c5 ]

Packet sockets with SOCK_DGRAM may pass an address for use in
dev_hard_header. Ensure that it is of sufficient length.
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d5c7c745f254c6cb98b3b3f15fe789b8bd770c72 ]

When x25_asy_open() fails, it already cleans up by itself,
so its caller doesn't need to free the memory again.

It seems we still have to call x25_asy_free() to clear the SLF_INUSE
bit, so just set these pointers to NULL after kfree().

Reported-and-tested-by: syzbot+5e5e969e525129229052@syzkaller.appspotmail.com
Fixes: 3b780bed ("x25_asy: Free x25_asy on x25_asy_open() failure.")
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c6ec179a0082e2e76e3a72050c2b99d3d0f3da3f ]

create_ctx can be called from atomic context, hence use
GFP_ATOMIC instead of GFP_KERNEL.

[  395.962599] BUG: sleeping function called from invalid context at mm/slab.h:421
[  395.979896] in_atomic(): 1, irqs_disabled(): 0, pid: 16254, name: openssl
[  395.996564] 2 locks held by openssl/16254:
[  396.010492]  #0: 00000000347acb52 (sk_lock-AF_INET){+.+.}, at: do_tcp_setsockopt.isra.44+0x13b/0x9a0
[  396.029838]  #1: 000000006c9552b5 (device_spinlock){+...}, at: tls_init+0x1d/0x280
[  396.047675] CPU: 5 PID: 16254 Comm: openssl Tainted: G           O      4.20.0-rc6+ #25
[  396.066019] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0c 09/25/2017
[  396.083537] Call Trace:
[  396.096265]  dump_stack+0x5e/0x8b
[  396.109876]  ___might_sleep+0x216/0x250
[  396.123940]  kmem_cache_alloc_trace+0x1b0/0x240
[  396.138800]  create_ctx+0x1f/0x60
[  396.152504]  tls_init+0xbd/0x280
[  396.166135]  tcp_set_ulp+0x191/0x2d0
[  396.180035]  ? tcp_set_ulp+0x2c/0x2d0
[  396.193960]  do_tcp_setsockopt.isra.44+0x148/0x9a0
[  396.209013]  __sys_setsockopt+0x7c/0xe0
[  396.223054]  __x64_sys_setsockopt+0x20/0x30
[  396.237378]  do_syscall_64+0x4a/0x180
[  396.251200]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: df9d4a178022 ("net/tls: sleeping function from invalid context")
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit b26322d2ac6c1c1087af73856531bb836f6963ca ]

The function should return an error if create_singlethread_workqueue()
fails.

Fixes: 34877a15 ("net: stmmac: Rework and fix TX Timeout code")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 78abe3d0dfad196959b1246003366e2610775ea6 ]

clcsock can be released while kernel_accept() references it in TCP
listen worker. Also, clcsock needs to wake up before released if TCP
fallback is used and the clcsock is blocked by accept. Add a lock to
safely release clcsock and call kernel_sock_shutdown() to wake up
clcsock from accept in smc_release().

Reported-by: syzbot+0bf2e01269f1274b4b03@syzkaller.appspotmail.com
Reported-by: syzbot+e3132895630f957306bc@syzkaller.appspotmail.com
Signed-off-by: NMyungho Jung <mhjungk@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7314f5480f3e37e570104dc5e0f28823ef849e72 ]

nr_find_socket(), nr_find_peer() and nr_find_listener() lock the
sock after finding it in the global list. However, the call path
requires BH disabled for the sock lock consistently.

Actually the locking is unnecessary at this point, we can just hold
the sock refcnt to make sure it is not gone after we unlock the global
list, and lock it later only when needed.

Reported-and-tested-by: syzbot+f621cda8b7e598908efa@syzkaller.appspotmail.com
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8742beb50f2db903d3b6d69ddd81d67ce9914453 ]

Even though the link is down before entering hibernation,
there is an issue that the network interface always links up after resuming
from hibernation.

If the link is still down before enabling the network interface,
and after resuming from hibernation, the phydev->state is forcibly set
to PHY_UP in mdio_bus_phy_restore(), and the link becomes up.

In suspend sequence, only if the PHY is attached, mdio_bus_phy_suspend()
calls phy_stop_machine(), and mdio_bus_phy_resume() calls
phy_start_machine().
In resume sequence, it's enough to do the same as mdio_bus_phy_resume()
because the state has been preserved.

This patch fixes the issue by calling phy_start_machine() in
mdio_bus_phy_restore() in the same way as mdio_bus_phy_resume().

Fixes: bc87922f ("phy: Move PHY PM operations into phy_device")
Suggested-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 006791772084383de779ef29f2e06f3a6e111e7d ]

The mvpp2_phylink_validate() function sets all modes that are
supported by a given PPv2 port. A recent change made all ports to
advertise they support 10G modes in certain cases. This is not true,
as only the port #0 can do so. This patch fixes it.

Fixes: 01b3fd5ac97c ("net: mvpp2: fix detection of 10G SFP modules")
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4298388574dae6168fa8940b3edc7ba965e8a7ab ]

On some platforms (currently detected only on SAMA5D4) TX might stuck
even the pachets are still present in DMA memories and TX start was
issued for them. This happens due to race condition between MACB driver
updating next TX buffer descriptor to be used and IP reading the same
descriptor. In such a case, the "TX USED BIT READ" interrupt is asserted.
GEM/MACB user guide specifies that if a "TX USED BIT READ" interrupt
is asserted TX must be restarted. Restart TX if used bit is read and
packets are present in software TX queue. Packets are removed from software
TX queue if TX was successful for them (see macb_tx_interrupt()).
Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ade446403bfb79d3528d56071a84b15351a139ad ]

Since commit 7969e5c4 ("ip: discard IPv4 datagrams with overlapping
segments.") IPv4 reassembly code drops the whole queue whenever an
overlapping fragment is received. However, the test is written in a way
which detects duplicate fragments as overlapping so that in environments
with many duplicate packets, fragmented packets may be undeliverable.

Add an extra test and for (potentially) duplicate fragment, only drop the
new fragment rather than the whole queue. Only starting offset and length
are checked, not the contents of the fragments as that would be too
expensive. For similar reason, linear list ("run") of a rbtree node is not
iterated, we only check if the new fragment is a subset of the interval
covered by existing consecutive fragments.

v2: instead of an exact check iterating through linear list of an rbtree
node, only check if the new fragment is subset of the "run" (suggested
by Eric Dumazet)

Fixes: 7969e5c4 ("ip: discard IPv4 datagrams with overlapping segments.")
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 202700e30740c6568b5a6943662f3829566dd533 ]

Using del_timer() + add_timer() is generally unsafe on SMP,
as noticed by syzbot. Use mod_timer() instead.

kernel BUG at kernel/time/timer.c:1136!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 1026 Comm: kworker/u4:4 Not tainted 4.20.0+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events_unbound flush_to_ldisc
RIP: 0010:add_timer kernel/time/timer.c:1136 [inline]
RIP: 0010:add_timer+0xa81/0x1470 kernel/time/timer.c:1134
Code: 4d 89 7d 40 48 c7 85 70 fe ff ff 00 00 00 00 c7 85 7c fe ff ff ff ff ff ff 48 89 85 90 fe ff ff e9 e6 f7 ff ff e8 cf 42 12 00 <0f> 0b e8 c8 42 12 00 0f 0b e8 c1 42 12 00 4c 89 bd 60 fe ff ff e9
RSP: 0018:ffff8880a7fdf5a8 EFLAGS: 00010293
RAX: ffff8880a7846340 RBX: dffffc0000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff816f3ee1 RDI: ffff88808a514ff8
RBP: ffff8880a7fdf760 R08: 0000000000000007 R09: ffff8880a7846c58
R10: ffff8880a7846340 R11: 0000000000000000 R12: ffff88808a514ff8
R13: ffff88808a514ff8 R14: ffff88808a514dc0 R15: 0000000000000030
FS:  0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000061c500 CR3: 00000000994d9000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 decode_prio_command drivers/net/hamradio/6pack.c:903 [inline]
 sixpack_decode drivers/net/hamradio/6pack.c:971 [inline]
 sixpack_receive_buf drivers/net/hamradio/6pack.c:457 [inline]
 sixpack_receive_buf+0xf9c/0x1470 drivers/net/hamradio/6pack.c:434
 tty_ldisc_receive_buf+0x164/0x1c0 drivers/tty/tty_buffer.c:465
 tty_port_default_receive_buf+0x114/0x190 drivers/tty/tty_port.c:38
 receive_buf drivers/tty/tty_buffer.c:481 [inline]
 flush_to_ldisc+0x3b2/0x590 drivers/tty/tty_buffer.c:533
 process_one_work+0xd0c/0x1ce0 kernel/workqueue.c:2153
 worker_thread+0x143/0x14a0 kernel/workqueue.c:2296
 kthread+0x357/0x430 kernel/kthread.c:246
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8203e2d844d34af247a151d8ebd68553a6e91785 ]

Sergey reported that forwarding was no longer working
if fq packet scheduler was used.

This is caused by the recent switch to EDT model, since incoming
packets might have been timestamped by __net_timestamp()

__net_timestamp() uses ktime_get_real(), while fq expects packets
using CLOCK_MONOTONIC base.

The fix is to clear skb->tstamp in forwarding paths.

Fixes: 80b14dee ("net: Add a new socket option for a future transmit time.")
Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NSergey Matyukevich <geomatsi@gmail.com>
Tested-by: NSergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d63967e475ae10f286dbd35e189cb241e0b1f284 ]

Since capi_ioctl() copies 64 bytes after calling
capi20_get_manufacturer() we need to ensure to not leak
information to user.

BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
CPU: 0 PID: 11245 Comm: syz-executor633 Not tainted 4.20.0-rc7+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x173/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
 kmsan_internal_check_memory+0x9d4/0xb00 mm/kmsan/kmsan.c:704
 kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601
 _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
 capi_ioctl include/linux/uaccess.h:177 [inline]
 capi_unlocked_ioctl+0x1a0b/0x1bf0 drivers/isdn/capi/capi.c:939
 do_vfs_ioctl+0xebd/0x2bf0 fs/ioctl.c:46
 ksys_ioctl fs/ioctl.c:713 [inline]
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl+0x1da/0x270 fs/ioctl.c:718
 __x64_sys_ioctl+0x4a/0x70 fs/ioctl.c:718
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440019
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffdd4659fb8 EFLAGS: 00000213 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440019
RDX: 0000000020000080 RSI: 00000000c0044306 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
R10: 0000000000000000 R11: 0000000000000213 R12: 00000000004018a0
R13: 0000000000401930 R14: 0000000000000000 R15: 0000000000000000

Local variable description: ----data.i@capi_unlocked_ioctl
Variable was created at:
 capi_ioctl drivers/isdn/capi/capi.c:747 [inline]
 capi_unlocked_ioctl+0x82/0x1bf0 drivers/isdn/capi/capi.c:939
 do_vfs_ioctl+0xebd/0x2bf0 fs/ioctl.c:46

Bytes 12-63 of 64 are uninitialized
Memory access of size 64 starts at ffff88807ac5fce8
Data copied to user address 0000000020000080
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>