Merge tag 'sunxi-config64-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc

Allwinner arm64 defconfig changes for 4.16

Enables MUSB driver and the Allwinner glue layer driver by default.

All Allwinner SoCs (excluding the A80) have the Mentor Graphics Inventra
Multi-Point Hi-Speed OTG Controller (MHDRC). Enabling this extends test
coverage to this peripheral.

* tag 'sunxi-config64-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: defconfig: enable MUSB HDRC along with Allwinner glue
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'keystone_config_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/soc

ARM: Keystone configs for 4.16

  - Enable QSPI
  - Enable LEDs
  - Enable GPIO-decoder

* tag 'keystone_config_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: configs: keystone_defconfig: Enable few peripheral drivers
Signed-off-by: NOlof Johansson <olof@lixom.net>

This is the pxa changes for v4.16 cycle.

It is :
 - the conversion to the new parser sharpslpart parser
   for the Sharp variants
 - an I2C platform data cleanup for PXA
 - a gpioreg switch of one register for lubbock

* tag 'pxa-for-4.16' of https://github.com/rjarzmik/linux:
  ARM: pxa/lubbock: add GPIO driver for LUB_MISC_WR register
  ARM: pxa/poodle: Remove hardcoded partitioning, use sharpslpart parser
  ARM: pxa/spitz: Remove hardcoded partitioning, use sharpslpart parser
  ARM: pxa/tosa: Remove hardcoded partitioning, use sharpslpart parser
  ARM: pxa/corgi: Remove hardcoded partitioning, use sharpslpart parser
  ARM: pxa: move header file out of I2C realm
  ARM: pxa: move declarations to proper place
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.16/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Two defconfig updates for omaps

These are to configure dra7 PCIe for omap2plus_defconfig and
multi_v7_defconfig.

* tag 'omap-for-v4.16/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
  ARM: omap2plus_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.16/soc-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Second set of SoC changes for omaps for v4.16 merge window

We can now drop some more of legacy platform data for omap3 as
it's been booting in device tree only mode for quite a while now.
This clock related data is coming from device tree configured
clocks now.

The other changes add support for detecting new dra762 SoC variant.

* tag 'omap-for-v4.16/soc-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: dra762: Register package specific hwmod
  ARM: OMAP2+: dra762: Add support for device package identification
  ARM: OMAP2+: Drop unused legacy data for prcm_reg_id and module_bit
Signed-off-by: NOlof Johansson <olof@lixom.net>

mvebu arm64 for 4.16 (part 1)

Adding the cpu frequency scaling support for Armada 37xx

* tag 'mvebu-arm64-4.16-1' of git://git.infradead.org/linux-mvebu:
  arm64: defconfig: enable ARM_ARMADA_37XX_CPUFREQ
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'renesas-soc2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Second Round of Renesas ARM Based SoC Updates for v4.16

* rcar-sysc: Keep wakeup sources active during system suspend

  Geert Uytterhoeven says "If an R-Car SYSC slave device is part of the
  CPG/MSTP or CPG/MSSR Clock Domain and to be used as a wakeup source, it
  must be kept active during system suspend.

  Currently this is handled in device-specific drivers by explicitly
  increasing the use count of the module clock when the device is
  configured as a wakeup source.  However, the proper way to prevent the
  device from being stopped is to inform this requirement to the genpd
  core, by setting the GENPD_FLAG_ACTIVE_WAKEUP flag.

  Note that this will only affect devices configured as wakeup sources."

* tag 'renesas-soc2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: rcar-sysc: Keep wakeup sources active during system suspend
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'renesas-defconfig-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Renesas ARM Based SoC Defconfig Updates for v4.16

shmobile_defconfig:
* Enable PWM timers, which are present on R-Car and RZ/G1 platforms,
  as a built-in
* Enable SGTL5000 audio codec, which is present on the he iWave RZ/G1M Q7
  carrier board, as a built-in

multi_v7_defconfig:
* Enable PWM timers, which are present on R-Car and RZ/G1 platforms,
  as a module

* tag 'renesas-defconfig-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: defconfig: Enable PWM
  ARM: multi_v7_defconfig: Select PWM_RCAR as module
  ARM: shmobile: defconfig: Enable SGTL5000 audio codec
Signed-off-by: NOlof Johansson <olof@lixom.net>

This adds an SoC driver for the Gemini. Currently there
is only one thing not fitting into any other framework,
and that is the bus arbitration setting.

All Gemini vendor trees seem to be setting this register to
exactly the same arbitration so we just add a small code
snippet to do this at subsys_init() time before any other
drivers kick in.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'v4.15-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/soc

Pull "arm: Updates for soc driver for v4.15-next" from Matthias Brugger:

- change kconfig entry for armv7 SoCs to be more generic
- add support for mt2701 scpsys driver
  binding documentation
  extend driver to allow the bus protection to overwrite the register

* tag 'v4.15-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  soc: mediatek: add MT2712 scpsys support
  soc: mediatek: add dependent clock jpgdec/audio for scpsys
  soc: mediatek: extend bus protection API
  dt-bindings: soc: add MT2712 power dt-bindings
  ARM: mediatek: use more generic prompts for SoCs with ARMv7

Merge tag 'tegra-for-4.16-soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

Pull "soc/tegra: Changes for v4.16-rc1" from Thierry Reding:

Fuse and chip ID support for Tegra186 is added in this set of changes,
followed by some unification work for the PMC driver in order to avoid
code duplication between Tegra186 and prior chips.

This also contains a couple of fixes for reading fuses on Tegra20.

* tag 'tegra-for-4.16-soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: fuse: Explicitly request DMA channel from APB DMA driver
  soc/tegra: fuse: Fix reading registers using DMA on Tegra20
  soc/tegra: pmc: Consolidate Tegra186 support
  soc/tegra: pmc: Parameterize driver
  soc/tegra: fuse: Add Tegra186 chip ID support
  soc/tegra: fuse: Warn if accessing unmapped registers
  soc/tegra: fuse: Move register mapping check
  soc/tegra: fuse: Add Tegra186 support
  dt-bindings: misc: Add Tegra186 MISC registers bindings

Merge tag 'samsung-defconfig-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Pull "Samsung defconfig changes for v4.16" from Krzysztof Kozłowski:

1. Enable missing drivers for supported Exynos boards (PMU, CEC, MHL
   bridge, ASoC for Odroid XU3/XU4).
2. Enable Exynos IOMMU driver on exynos_defconfig.

* tag 'samsung-defconfig-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: exynos_defconfig: Enable CONFIG_EXYNOS_IOMMU
  ARM: multi_v7_defconfig: Enable missing drivers for supported Exynos boards
  ARM: exynos_defconfig: Enable missing drivers for supported Exynos boards

Merge tag 'omap-for-v4.15/defconfig-v2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "One old minor pull request pending" from Tony Lindgren:

Few omap2plus_defconfig changes for v4.15 merge window to enable NEON
based crypto and droid 4 USB PHY.

* tag 'omap-for-v4.15/defconfig-v2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: omap2plus_defconfig: Enable droid 4 USB PHY
  ARM: omap2plus_defconfig: enable NEON based crypto

Merge tag 'omap-for-v4.16/soc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "SoC changes for omaps for v4.16 merge window" from Tony Lindgren:

For most part this is a series from Tero Kristo to prepare things
for using clkctrl clocks with DTS data. The other changes are to
make few data structures const.

* tag 'omap-for-v4.16/soc-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: CM: make cm_ll_data structures as const
  ARM: OMAP2+: CM: make some pointers and function arguments as const
  ARM: DM816x: hwmod_data: fix clockdomain name for sata hwmod
  ARM: OMAP2+: hwmod: calculate physical register address on am33xx
  ARM: AM33xx: CM: add support for getting physical address for a register
  ARM: OMAP2+: clockdomain: remove the obsolete clkdm_xlate_address API
  ARM: OMAP2+: hwmod: fix clkctrl address translation logic
  ARM: OMAP4: CMINST: add support for translating clkctrl addresses
  ARM: OMAP2+: CM: add support for getting phys address for a clkctrl register

Pull "ARM: ep93xx: ts72xx: Add support for BK3 board" from Alexander Sverdlin:

This patch series adds support for Liebherr's BK3 board, being
a derivative of TS72XX design.

* tag 'bk3' of https://github.com/sverdlin/ep93xx:
  ARM: ep93xx: ts72xx: Add support for BK3 board - ts72xx derivative
  ARM: ep93xx: ts72xx: cosmetic: Add some description to ts72xx code
  ARM: ep93xx: ts72xx: Rewrite ts72xx_register_flash() to accept parameters
  ARM: ep93xx: ts72xx: Provide include guards for ts72xx.h file

Currently fuse driver requests DMA channel from an arbitrary DMA device,
it is not a problem since there is only one DMA provider for Tegra20 yet,
but it may become troublesome if another provider will appear.
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Acked-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

FUSE driver doesn't configure DMA channel properly, because of it DMA
transfer is never issued and tegra20_fuse_read() always return 0x0.
Signed-off-by: NDmitry Osipenko <digetx@gmail.com>
Acked-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

Enable the efuse driver for UniPhier SoC
Signed-off-by: NKeiji Hayashibara <hayashibara.keiji@socionext.com>
Acked-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Take over sole maintenance of Nomadik, U300 and Ux500. Since all are
Device Tree converted and using standard format drivers this is not
burdensome. Alessandro is not working on this platform any more.
Let's use one single git tree for all of them and combine the
MAINTAINERS entries into one.
Suggested-by: NKrzysztof Kozlowski <krzk@kernel.org>
Acked-by: NAlessandro Rubini <rubini@unipv.it>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-soc-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM Based SoC Updates for v4.16" from Simon Horman:

* Identify R-Car M3-W ES1.1

  Geert Uytterhoeven says "The Product Register of R-Car M3-W ES1.1
  incorrectly identifies the SoC revision as ES2.0.  Add a workaround to
  fix this."

  It is my understanding that this is likely to be forwards-compatibile.

* tag 'renesas-soc-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: Identify R-Car M3-W ES1.1

Most development boards and devices have one or more LEDs. It is useful
during debugging if they can be wired to show different behaviours such as
disk or cpu activity or a load-average dependent heartbeat. Enable panic
and disk activity triggers so they can be tied to LED activity during
debugging as well.
Signed-off-by: NAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe
controller present in dra7 SoCs in both host mode and device mode.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe
controller present in dra7 SoCs in both host mode and device mode.
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Register dra762 abz package specific hwmod. Also move registering rtc hwmod
into respective SoC conditional statements instead of doing it separately.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

dra762 comes in two packages:
- ABZ: Pin compatible package with DRA742 and DDR@1333MHz
- ACD: High performance(OPP_PLUS) package with new IPs

Both the above packages uses the same IDCODE hence needs to
differentiate using package information in DIE_ID_2.
Add support for the same.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

Add the cpu frequency scaling support for Armada 37xx by default, this
should allow a better coverage in kernel continuous integration tests.
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>

add scpsys driver for MT2712
Signed-off-by: NWeiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

There are dependent clock jpgdec/audio in scpsys on MT2712,
and will exist three dependent clocks on MT2712 VDEC.
Signed-off-by: NWeiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

MT2712 add "set/clear" bus control register to each control register set
instead of providing only one "enable" control register, we could avoid
the read-modify-write racing by declaring "bus_prot_reg_update" as "false"
in scp_soc_data or declaring as "true" to use the legacy update method.
By improving the mtk-infracfg bus protection implementation to
support set/clear bus protection control method by IC configuration.
Signed-off-by: NWeiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

Add power dt-bindings for MT2712.
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NWeiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

Add a gpio driver for the lubbock miscellaneous write IO register so we
can take advantage of subsystems modelled around gpiolib, rather than
having to provide platform specific callbacks.
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>

Supported MediaTek SoCs with ARMv7 are not limited within MT65xx or MT81xx
and thus use more generic words to prompt users as the other vendors
usually use.
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>

If an R-Car SYSC slave device is part of the CPG/MSTP or CPG/MSSR Clock
Domain and to be used as a wakeup source, it must be kept active during
system suspend.

Currently this is handled in device-specific drivers by explicitly
increasing the use count of the module clock when the device is
configured as a wakeup source.  However, the proper way to prevent the
device from being stopped is to inform this requirement to the genpd
core, by setting the GENPD_FLAG_ACTIVE_WAKEUP flag.

Note that this will only affect devices configured as wakeup sources.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

RZ/G1 and R-Car platforms have PWM timers. This patch enables PWM support
by default.
Signed-off-by: NFabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: NBiju Das <biju.das@bp.renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

Enable PWM support for R-Car and friends by default.
Signed-off-by: NFabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: NBiju Das <biju.das@bp.renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

The iWave RZ/G1M Q7 carrier board supports I2S audio codec "SGTL5000".

To increase hardware support enable the driver in the shmobile_defconfig
multiplatform configuration.
Signed-off-by: NBiju Das <biju.das@bp.renesas.com>
Reviewed-by: NFabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>

This reverts commit 04e35f44.

SELinux runs with secureexec for all non-"noatsecure" domain transitions,
which means lots of processes end up hitting the stack hard-limit change
that was introduced in order to fix a race with prlimit(). That race fix
will need to be redesigned.
Reported-by: NLaura Abbott <labbott@redhat.com>
Reported-by: NTomáš Trnka <trnka@scm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull Page Table Isolation (PTI) v4.14 backporting base tree from Ingo Molnar:
 "This tree contains the v4.14 PTI backport preparatory tree, which
  consists of four merges of upstream trees and 7 cherry-picked commits,
  which the upcoming PTI work depends on"

NOTE! The resulting tree is exactly the same as the original base tree
(ie the diff between this commit and its immediate first parent is
empty).

The only reason for this merge is literally to have a common point for
the actual PTI changes so that the commits can be shared in both the
4.15 and 4.14 trees.

* 'WIP.x86-pti.base-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
  locking/barriers: Convert users of lockless_dereference() to READ_ONCE()
  locking/barriers: Add implicit smp_read_barrier_depends() to READ_ONCE()
  bpf: fix build issues on um due to mising bpf_perf_event.h
  perf/x86: Enable free running PEBS for REGS_USER/INTR
  x86: Make X86_BUG_FXSAVE_LEAK detectable in CPUID on AMD
  x86/cpufeature: Add User-Mode Instruction Prevention definitions