- 10 4月, 2013 1 次提交
-
-
由 Florian Fainelli 提交于
Just like the OHCI counter part we just can remove the architecture specific symbols which prevent these configuration symbols from being selected by platforms/architectures requiring it. The original implementation did not scale at all since it required each and every single architecture to be added for these configuration symbols to be selected. Now it is up to the EHCI driver and/or platform to select these configuration symbols accordingly. Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 20 3月, 2013 1 次提交
-
-
由 Alexandre Courbot 提交于
ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO, so there is no need to select it explicitly. Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NLinus Walleij <linus.walleij@linaro.org>
-
- 10 1月, 2013 1 次提交
-
-
由 Vinh Nguyen Huu Tuong 提交于
This patch consists of: - Add driver for OCM component - Export OCM Information at /sys/kernel/debug/ppc4xx_ocm/info Signed-off-by: NVinh Nguyen Huu Tuong <vhtnguyen@apm.com> Acked-by: NJosh Boyer <jwboyer@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 03 5月, 2012 1 次提交
-
-
由 Mai La 提交于
This patch consists of: - Enable PCI MSI as default for Bluestone board - Change definition of number of MSI interrupts as it depends on SoC - Fix returning ENODEV as finding MSI node - Fix MSI physical high and low address - Keep MSI data logically Signed-off-by: NMai La <mla@apm.com> Signed-off-by: NJosh Boyer <jwboyer@gmail.com>
-
- 17 3月, 2012 1 次提交
-
-
由 Vinh Nguyen Huu Tuong 提交于
This patch extends PCI-E driver to support PCI-E for APM821xx SoC on Bluestone board. Signed-off-by: NVinh Nguyen Huu Tuong <vhtnguyen@apm.com> Signed-off-by: NJosh Boyer <jwboyer@gmail.com>
-
- 09 12月, 2011 2 次提交
-
-
由 Tony Breeds 提交于
Based on original work by David 'Shaggy' Kleikamp. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NJosh Boyer <jwboyer@gmail.com>
-
由 Tony Breeds 提交于
Based on original work by David 'Shaggy' Kleikamp. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NJosh Boyer <jwboyer@gmail.com>
-
- 14 11月, 2011 1 次提交
-
-
由 Paul Bolle 提交于
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Acked-by: NJosh Boyer <jwboyer@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 30 10月, 2011 1 次提交
-
-
由 Paul Bolle 提交于
These Kconfig entries have been commented out ever since commit f6557331 ("[...] Re-organize Kconfig code for 4xx in arch/powerpc"). There's no indication why they're commented out. It looks like they're just "old, unused [...] config options" that were not removed, as other entries were in that commit, but only commented out. They might as well be removed now. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 19 8月, 2011 1 次提交
-
-
由 Tony Breeds 提交于
In commit 9aa32835 (ehea/ibm*: Move the IBM drivers) the IBM_NEW_EMAC* were renames to IBM_EMAC* The conversion was incomplete so that even if the driver was added to the .config it wasn't built, but there were no errors). In this commit we also update the various defconfigs that use EMAC to use the new Kconfig symbol, and explicitly add the NET_VENDOR_IBM guard. We do not explicitly select the Kconfig dependencies, as this would force EMAC on. Doing it in the defconfig allows more flexibility. Tested on a canyondlands board. Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 5月, 2011 1 次提交
-
-
由 Rupjyoti Sarmah 提交于
This patch adds MSI support for 440SPe, 460Ex, 460Sx and 405Ex. Signed-off-by: NRupjyoti Sarmah <rsarmah@apm.com> Signed-off-by: NTirumala R Marri <tmarri@apm.com> Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 02 2月, 2011 1 次提交
-
-
由 Rupjyoti Sarmah 提交于
This fix is a reset for USB PHY that requires some amount of time for power to be stable on Canyonlands. Signed-off-by: NRupjyoti Sarmah <rsarmah@apm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 13 10月, 2010 1 次提交
-
-
由 Tirumala Marri 提交于
This patch adds CPU, device tree, defconfig and bluestone board support for APM821xx SoC. Signed-off-by: NTirumala R Marri <tmarri@apm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 12 5月, 2010 1 次提交
-
-
由 Stefan Roese 提交于
ICON is based on the AppliedMicro 440SPe. It is equipped with 64MByte NOR FLASH, SODIMM, Gigabit ethernet, SM502 on PCI(X), LSI SAS1068E on PCIe0 and custom FPGA on PCIe1. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 05 5月, 2010 2 次提交
-
-
由 Torez Smith 提交于
This is a trivial 4xx plaform that uses the new simple bsp from Josh and is handy to use in simulators such as ISS or even Mambo who don't properly implement most of the actual devices in the SoC but really only the core. Signed-off-by: NTorez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Dave Kleikamp 提交于
This patch adds the base support for the 476 processor. The code was primarily written by Ben Herrenschmidt and Torez Smith, but I've been maintaining it for a while. The goal is to have a single binary that will run on 44x and 47x, but we still have some details to work out. The biggest is that the L1 cache line size differs on the two platforms, but it's currently a compile-time option. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NTorez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 31 8月, 2009 1 次提交
-
-
由 fkan@amcc.com 提交于
This patch adds support for the AMCC (AppliedMicro) PPC460SX Eiger evaluation board. Signed-off-by: NTai Tri Nguyen <ttnguyen@amcc.com> Acked-by: NFeng Kan <fkan@amcc.com> Acked-by: NTirumala Marri <tmarri@amcc.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 07 6月, 2009 1 次提交
-
-
由 Roderick Colenbrander 提交于
Signed-off-by: NRoderick Colenbrander <thunderbird2k@gmail.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 15 5月, 2009 1 次提交
-
-
由 Grant Likely 提交于
It is common to use U-Boot on Xilinx Virtex platforms. This patch ensures that CONFIG_DEFAULT_UIMAGE is selected for virtex Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 15 2月, 2009 1 次提交
-
-
由 Madhulika Madishetty 提交于
This patch contains initial framework for the AMCC Redwood board. Signed-off-by: NMadhulika Madishetty <mmadishetty@amcc.com> Signed-off-by: NTirumala Marri <tmarri@amcc.com> Signed-off-by: NFeng Kan <fkan@amcc.com> Signed-off-by: NVidhyananth Venkatasamy <vvenkatasamy@amcc.com> Signed-off-by: NPreetesh Parekh <pparekh@amcc.com> Acked-by: NLoc Ho <lho@amcc.com> Acked-by: NFeng Kan <fkan@amcc.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 18 10月, 2008 1 次提交
-
-
由 Steven A. Falco 提交于
This patch adds support for the GPIO functions of PPC40x and PPC44x SOCs. Signed-off-by: NSteve Falco <sfalco@harris.com> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 03 10月, 2008 1 次提交
-
-
由 Victor Gallardo 提交于
The Arches Evaluation board is based on the AMCC 460GT SoC chip. This board is a dual processor board with each processor providing independent resources for Rapid IO, Gigabit Ethernet, and serial communications. Each 460GT has it's own 512MB DDR2 memory, 32MB NOR FLASH, UART, EEPROM and temperature sensor, along with a shared debug port. The two 460GT's will communicate with each other via shared memory, Gigabit Ethernet and x1 PCI-Express. Signed-off-by: NVictor Gallardo <vgallardo@amcc.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 28 8月, 2008 8 次提交
-
-
由 Josh Boyer 提交于
Add explicit support for the AMCC Glacier eval board to Kconfig and the ppc44x_simple file. Also removes the cayonlands compatible entry from the DTS file. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Josh Boyer 提交于
Migrate the AMCC Taishan board to use the ppc44x_simple platform file. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Josh Boyer 提交于
Migrate the AMCC Sequoia board to use the ppc44x_simple platform file. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Josh Boyer 提交于
Migrate the AMCC Rainier board to use the ppc44x_simple platform file. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Josh Boyer 提交于
Migrate the AMCC Katmai board to use the ppc44x_simple platform file. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Josh Boyer 提交于
Migrate the AMCC Canyonlands board to use the ppc44x_simple platform file. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Josh Boyer 提交于
Migrate the AMCC Bamboo board to use the ppc44x_simple platform file. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Josh Boyer 提交于
This adds a common board file for almost all of the "simple" PowerPC 44x boards that exist today. This is intended to be a single place to add support for boards that do not differ in platform support from most of the evaluation boards that are used as reference platforms. Boards that have specific requirements or custom hardware setup should still have their own board.c file. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 04 7月, 2008 1 次提交
-
-
由 John Linn 提交于
Support for the Xilinx Virtex5 FXT 440 is being added. Signed-off-by: NJohn Linn <john.linn@xilinx.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 11 6月, 2008 1 次提交
-
-
由 Giuseppe Coviello 提交于
The Sam440ep is an high customizable general purpose mini-itx board, based on the AMCC 440EP and with a LatticeXP FPGA onboard. It's poduced by ACube Systems Srl (Bassano del Grappa, Italy), http://www.acube-systems.biz. Signed-off-by: NGiuseppe Coviello <gicoviello@gmail.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 03 4月, 2008 1 次提交
-
-
由 Stefan Roese 提交于
This patch creates a common system reset routine for all 40x and 44x systems. Previously only a 44x routine existed. But since this system reset via the debug control register is common for 40x and 44x let's share this code for all those platforms in ppc4xx_soc.c. This patch also enables CONFIG_4xx_SOC for all 40x and 44x platforms. Tested on Kilauea (405EX) and Canyonlands (440EX). Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 26 3月, 2008 3 次提交
-
-
由 Stefan Roese 提交于
This patch adds support for the 256k L2 cache found on some IBM/AMCC 4xx PPC's. It introduces a common 4xx SoC file (sysdev/ppc4xx_soc.c) which currently "only" adds the L2 cache init code. Other common 4xx stuff can be added later here. The L2 cache handling code is a copy of Eugene's code in arch/ppc with small modifications. Tested on AMCC Taishan 440GX. Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Josh Boyer 提交于
The AMCC 440EP Yosemite board is very similar to the original AMCC Bamboo board. This adds a YOSEMITE option to Kconfig, and reuses the existing bamboo board support in the kernel. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Stefan Roese 提交于
Canyonlands is the AMCC 460EX eval board, featuring nearly all of the 460EX interfaces: - 1 * PCI (max 66MHz), 2 * PCIe (one 4-lane, one 1-lane) - 2 * GBit Ethernet with TCP/IP acceleration - USB 2.0 Host/Device OTG and Host interface - SATA port Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 16 2月, 2008 1 次提交
-
-
由 Josh Boyer 提交于
Clean up some whitespace issues in the 44x Kconfig file. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 25 1月, 2008 2 次提交
-
-
由 Sean MacLennan 提交于
Add the base platform support for the PIKA Warp boards. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 David Gibson 提交于
This patch extends the Ebony and Walnut platform code to instantiate the existing ds1742 RTC class driver for the DS1743 RTC/NVRAM chip found on both those boards. The patch uses a helper function to scan the device tree and instantiate the appropriate platform_device based on it, so it should be easy to extend for other boards which have mmio mapped RTC chips. Along with this, the device tree binding for the ds1743 chips is tweaked, based on the existing DS1385 OF binding found at: http://playground.sun.com/1275/proposals/Closed/Remanded/Accepted/346-it.txt Although that document covers the NVRAM portion of the chip, whereas here we're interested in the RTC portion, so it's not entirely clear if that's a good model. This implements only RTC class driver support - that is /dev/rtc0, not /dev/rtc, and the low-level get/set time callbacks remain unimplemented. That means in order to get at the clock you will either need a modified version of hwclock which will look at /dev/rtc0, or you'll need to configure udev to symlink rtc0 to rtc. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 24 12月, 2007 1 次提交
-
-
由 Josh Boyer 提交于
Enable PCI support for these eval boards among other things. Also selects PCI for Rainier in the Kconfig file. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-