The comments describing device power management callbacks in
include/pm.h are outdated and somewhat confusing, so make them
reflect the reality more accurately.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

virtio pci device reset actually just does an I/O
write, which in PCI is really posted, that is it
can complete on CPU before the device has received it.

Further, interrupts might have been pending on
another CPU, so device callback might get invoked after reset.

This conflicts with how drivers use reset, which is typically:
	reset
	unregister
a callback running after reset completed can race with
unregister, potentially leading to use after free bugs.

Fix by flushing out the write, and flushing pending interrupts.

This assumes that device is never reset from
its vq/config callbacks, or in parallel with being
added/removed, document this assumption.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Guest features selector spelling mistake.

Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Count of selector voltage is required for regulator_set_voltage
to work via set_voltage_sel. VDD1/2 currently have it as zero,
so regulator_set_voltage won't work for VDD1/2.
Update count (n_voltages) for VDD1/2.

Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain

With above expr, number of voltages that can be selected is
step value count * gain count

constant for gain count will be called VDD1_2_NUM_VOLT_COARSE

existing constant for step value count is VDD1_2_NUM_VOLTS,
use VDD1_2_NUM_VOLT_FINE instead to make clear that step value
is not the only component in deciding selectable voltage count
Signed-off-by: NAfzal Mohammed <afzal@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Last piece of code using ANY_I2C_BUS was deleted almost 2 years ago,
so ANY_I2C_BUS can go away as well.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

There is a potential integer overflow in drm_mode_dirtyfb_ioctl()
if userspace passes in a large num_clips.  The call to kmalloc would
allocate a small buffer, and the call to fb->funcs->dirty may result
in a memory corruption.
Reported-by: NHaogang Chen <haogangchen@gmail.com>
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds a new optional chunk to the CS ioctl that specifies optional flags
to the CS parser. Why this is useful is explained below. Note that some regs
no longer need the NOP relocation packet if this feature is enabled.
Tested on r300g and r600g with this flag disabled and enabled.

Assume there are two contexts sharing the same mipmapped tiled texture.
One context wants to render into the first mipmap and the other one
wants to render into the last mipmap. As you probably know, the hardware
has a MACRO_SWITCH feature, which turns off macro tiling for small mipmaps,
but that only applies to samplers.
(at least on r300-r500, though later hardware likely behaves the same)

So we want to just re-set the tiling flags before rendering (writing
packets), right? ... No. The contexts run in parallel, so they may
set the tiling flags simultaneously and then fire their command streams
also simultaneously. The last one setting the flags wins, the other one
loses.

Another problem is when one context wants to render into the first and
the last mipmap in one CS. Impossible. It must flush before changing
tiling flags and do the rendering into the smaller mipmaps in another CS.

Yet another problem is that writing copy_blit in userspace would be a mess
involving re-setting tiling flags to please the kernel, and causing races
with other contexts at the same time.

The only way out of this is to send tiling flags with each CS, ideally
with each relocation. But we already do that through the registers.
So let's just use what we have in the registers.
Signed-off-by: NMarek Olšák <maraeo@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Dummy, non-zero definitions for HPAGE_MASK and HPAGE_SIZE were added in
51c6f666 ("mm: ZAP_BLOCK causes redundant work") to avoid a divide
by zero in generic kernel code.

That code has since been removed, but probably should never have been
added in the first place: we don't want HPAGE_SIZE to act like PAGE_SIZE
for code that is working with hugepages, for example, when the
dependency on CONFIG_HUGETLB_PAGE has not been fulfilled.

Because hugepage size can differ from architecture to architecture, each
is required to have their own definitions for both HPAGE_MASK and
HPAGE_SIZE.  This is always done in arch/*/include/asm/page.h.

So, just remove the dummy and dangerous definitions since they are no
longer needed and reveals the correct dependencies.  Tested on
architectures using the definitions with allyesconfig: x86 (even with
thp), hppa, mips, powerpc, s390, sh3, sh4, sparc, and sparc64, and with
defconfig on ia64.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The buf_lock cannot be held while populating the inodes, so make the backend
pass forward an allocated and filled buffer instead. This solves the following
backtrace. The effect is that "buf" is only ever used to notify the backends
that something was written to it, and shouldn't be used in the read path.

To replace the buf_lock during the read path, isolate the open/read/close
loop with a separate mutex to maintain serialized access to the backend.

Note that is is up to the pstore backend to cope if the (*write)() path is
called in the middle of the read path.

[   59.691019] BUG: sleeping function called from invalid context at .../mm/slub.c:847
[   59.691019] in_atomic(): 0, irqs_disabled(): 1, pid: 1819, name: mount
[   59.691019] Pid: 1819, comm: mount Not tainted 3.0.8 #1
[   59.691019] Call Trace:
[   59.691019]  [<810252d5>] __might_sleep+0xc3/0xca
[   59.691019]  [<810a26e6>] kmem_cache_alloc+0x32/0xf3
[   59.691019]  [<810b53ac>] ? __d_lookup_rcu+0x6f/0xf4
[   59.691019]  [<810b68b1>] alloc_inode+0x2a/0x64
[   59.691019]  [<810b6903>] new_inode+0x18/0x43
[   59.691019]  [<81142447>] pstore_get_inode.isra.1+0x11/0x98
[   59.691019]  [<81142623>] pstore_mkfile+0xae/0x26f
[   59.691019]  [<810a2a66>] ? kmem_cache_free+0x19/0xb1
[   59.691019]  [<8116c821>] ? ida_get_new_above+0x140/0x158
[   59.691019]  [<811708ea>] ? __init_rwsem+0x1e/0x2c
[   59.691019]  [<810b67e8>] ? inode_init_always+0x111/0x1b0
[   59.691019]  [<8102127e>] ? should_resched+0xd/0x27
[   59.691019]  [<8137977f>] ? _cond_resched+0xd/0x21
[   59.691019]  [<81142abf>] pstore_get_records+0x52/0xa7
[   59.691019]  [<8114254b>] pstore_fill_super+0x7d/0x91
[   59.691019]  [<810a7ff5>] mount_single+0x46/0x82
[   59.691019]  [<8114231a>] pstore_mount+0x15/0x17
[   59.691019]  [<811424ce>] ? pstore_get_inode.isra.1+0x98/0x98
[   59.691019]  [<810a8199>] mount_fs+0x5a/0x12d
[   59.691019]  [<810b9174>] ? alloc_vfsmnt+0xa4/0x14a
[   59.691019]  [<810b9474>] vfs_kern_mount+0x4f/0x7d
[   59.691019]  [<810b9d7e>] do_kern_mount+0x34/0xb2
[   59.691019]  [<810bb15f>] do_mount+0x5fc/0x64a
[   59.691019]  [<810912fb>] ? strndup_user+0x2e/0x3f
[   59.691019]  [<810bb3cb>] sys_mount+0x66/0x99
[   59.691019]  [<8137b537>] sysenter_do_call+0x12/0x26
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Commit 4ca46ff3 (PM / Sleep: Mark
devices involved in wakeup signaling during suspend) introduced
the power.wakeup_path field in struct dev_pm_info to mark devices
whose children are enabled to wake up the system from sleep states,
so that power domains containing the parents that provide their
children with wakeup power and/or relay their wakeup signals are not
turned off.  Unfortunately, that introduced a PM regression on SH7372
whose power consumption in the system "memory sleep" state increased
as a result of it, because it prevented the power domain containing
the I2C controller from being turned off when some children of that
controller were enabled to wake up the system, although the
controller was not necessary for them to signal wakeup.

To fix this issue use the observation that devices whose
power.ignore_children flag is set for runtime PM should be treated
analogously during system suspend.  Namely, they shouldn't be
included in wakeup paths going through their children.  Since the
SH7372 I2C controller's power.ignore_children flag is set, doing so
will restore the previous behavior of that SOC.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts commit a15bd354.

It exceeded the padding on the SREGS struct, rendering the ABI
backwards-incompatible.

Conflicts:

	arch/powerpc/kvm/powerpc.c
	include/linux/kvm.h
Signed-off-by: NAvi Kivity <avi@redhat.com>

They are not used any more.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>

takes vfsmount and relative path, does lookup within that vfsmount
(possibly triggering automounts) and returns the result as root
of subtree suitable for return by ->mount() (i.e. a reference to
dentry and an active reference to its superblock grabbed, superblock
locked exclusive).

btrfs and nfs switched to it instead of open-coding the sucker.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

In 5fbdc103 the XEN_PLATFORM_PCI config
option was removed, but references in header files remained. Clean up
those references.
Signed-off-by: NDaniel De Graaf <dgdegra@tycho.nsa.gov>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

When mapping a foreign page with xenbus_map_ring_valloc() with the
GNTTABOP_map_grant_ref hypercall, set the GNTMAP_contains_pte flag and
pass a pointer to the PTE (in init_mm).

After the page is mapped, the usual fault mechanism can be used to
update additional MMs.  This allows the vmalloc_sync_all() to be
removed from alloc_vm_area().
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Acked-by: NAndrew Morton <akpm@linux-foundation.org>
[v1: Squashed fix by Michal for no-mmu case]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

This is just a cleanup patch to silence a static checker warning.

The problem is that we cap "nr_iovecs" so it can't be larger than
"UIO_MAXIOV" but we don't check for negative values.  It turns out this is
prevented at other layers, but logically it doesn't make sense to have
negative nr_iovecs so making it unsigned is nicer.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When CONFIG_BLK_DEV_INTEGRITY is not set, we get these warnings:

drivers/md/dm.c: In function 'split_bvec':
drivers/md/dm.c:1061:3: warning: statement with no effect
drivers/md/dm.c: In function 'clone_bio':
drivers/md/dm.c:1088:3: warning: statement with no effect
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The crisv10.c and the atmel_serial.c serial drivers intepret the fields of the
serial_rs485 structure in a different way.

In particular, crisv10.c uses SER_RS485_RTS_AFTER_SEND and
SER_RS485_RTS_ON_SEND for the voltage of the RTS pin; atmel_serial.c,
instead, uses these values to know if a delay must be set before and
after sending.  This patch makes the usage of these variables consistent
across all drivers and fixes the Documentation as well.

From now on, SER_RS485_RTS_AFTER_SEND and SER_RS485_RTS_ON_SEND will be
used to set the voltage of the RTS pin (as in the crisv10.c driver); the
delay will be understood by looking only at the value of
delay_rts_before_send and delay_rts_after_send.
Signed-off-by: NClaudio Scordino <claudio@evidence.eu.com>
Signed-off-by: NDarron Black <darron@griffin.net>
Acked-by: NJesper Nilsson <jesper.nilsson@axis.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Noticed by Egbert.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Cc: Egbert Eich <eich@suse.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fix warning of make xmldocs of documention of the struct member iommu_ops from struct bus_type.
Signed-off-by: NMarcos Paulo de Souza <marcos.mage@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

this patch addes exynos_drm_gem_init() creating and initialzing a gem.
allocation functions could use this function to create new gem and
it changes size type of exynos_drm_gem_create structure to 64bit
and also corrects comments to exynos_drm_gem_create structure.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

commit 3ceca749 added a TOS attribute.

Unfortunately TOS and TCLASS are both present in a dual-stack v6 socket,
furthermore they can have different values.  As such one cannot in a
sane way expose both through a single attribute.
Signed-off-by: NMaciej Żenczyowski <maze@google.com>
CC: Murali Raja <muralira@google.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ceph_osd_request struct allocates a 40-byte buffer for object names.
RBD image names can be up to 96 chars long (100 with the .rbd suffix),
which results in the object name for the image being truncated, and a
subsequent map failure.

Increase the oid buffer in request messages, in order to avoid the
truncation.
Signed-off-by: NStratos Psomadakis <psomas@grnet.gr>
Signed-off-by: NSage Weil <sage@newdream.net>

Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Nouveau, when configured with debugfs, creates debugfs files for every
channel, so structure holding list of files needs to be protected from
simultaneous changes by multiple threads.

Without this patch it's possible to hit kernel oops in
drm_debugfs_remove_files just by running a couple of xterms with
looped glxinfo.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch moves PORT_xx helper macro to sh_pfc.h,
and it expects CPU_ALL_PORT() macro for each CPU
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This patch move PORT_DATA_xx helper macro to sh_pfc.h.
and pfc-sh7372.c used it
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Now that all of the named string association with clocks has been
migrated to clkdev lookups there's no meaningful named topology that can
be constructed for a debugfs tree view. Get rid of the left over bits,
and shrink struct clk a bit in the process.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

For some frequencies, the clocks_calc_mult_shift() function will
unfortunately select mult values very close to 0xffffffff.  This
has the potential to overflow when NTP adjusts the clock, adding
to the mult value.

This patch adds a clocksource.maxadj value, which provides
an approximation of an 11% adjustment(NTP limits adjustments to
500ppm and the tick adjustment is limited to 10%), which could
be made to the clocksource.mult value. This is then used to both
check that the current mult value won't overflow/underflow, as
well as warning us if the timekeeping_adjust() code pushes over
that 11% boundary.

v2: Fix max_adjustment calculation, and improve WARN_ONCE
messages.

v3: Don't warn before maxadj has actually been set

CC: Yong Zhang <yong.zhang0@gmail.com>
CC: David Daney <ddaney.cavm@gmail.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Chen Jie <chenj@lemote.com>
CC: zhangfx <zhangfx@lemote.com>
CC: stable@kernel.org
Reported-by: NChen Jie <chenj@lemote.com>
Reported-by: Nzhangfx <zhangfx@lemote.com>
Tested-by: NYong Zhang <yong.zhang0@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>

This reverts commit a72c5e5e.

The commit introduced alias for block devices which is intended to be
used during logging although actual usage hasn't been committed yet.
This approach adds very limited benefit (raw log might be easier to
follow) which can be trivially implemented in userland but has a lot
of problems.

It is much worse than netif renames because it doesn't rename the
actual device but just adds conveninence name which isn't used
universally or enforced.  Everything internal including device lookup
and sysfs still uses the internal name and nothing prevents two
devices from using conflicting alias - ie. sda can have sdb as its
alias.

This has been nacked by people working on device driver core, block
layer and kernel-userland interface and shouldn't have been
upstreamed.  Revert it.

 http://thread.gmane.org/gmane.linux.kernel/1155104
 http://thread.gmane.org/gmane.linux.scsi/68632
 http://thread.gmane.org/gmane.linux.scsi/69776Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NKay Sievers <kay.sievers@vrfy.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Nao Nishijima <nao.nishijima.xt@hitachi.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

when pinctl subsystem is not selected, when compiling drivers including
the include/linux/pinctrl/pinctrl.h, we will get the warning as below:
In file included from include/linux/pinctrl/pinmux.h:17,
                 from drivers/tty/serial/sirfsoc_uart.c:25:
include/linux/pinctrl/pinctrl.h:126: warning: 'struct pinctrl_dev'
		declared inside parameter list
include/linux/pinctrl/pinctrl.h:126: warning: its scope is only this
      definition or declaration, which is probably not what you want
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NKeng-Yu Lin <kengyu@canonical.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Two new struct members were not documented, fix that.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch adds a custom DSS reset function used on OMAPs from OMAP2
forward.

The function doesn't actually do a reset, it only waits for the reset to
complete. The reason for this is that on OMAP4 there is no possibility
to do a SW reset, and on OMAP2/3 doing a SW reset for dss_core resets
all the other DSS modules also, thus breaking the HWMOD model where
every DSS module is handled independently.

This fixes the problem with DSS reset on OMAP4, caused by the fact that
because there's no SW reset for dss_core on OMAP4, the HWMOD framework
doesn't try to reset dss_core and thus the DSS clocks were never enabled
at the same time. This causes causes the HWMOD reset to fail for
dss_dispc and dss_rfbi.

The common reset function will also allow us to fix another problem in
the future: before doing a reset we need to disable DSS outputs, which
are in some cases enabled by the bootloader, as otherwise DSS HW seems
to get more or less stuck, requiring a power reset to recover.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
[paul@pwsan.com: modified to build arch/arm/mach-omap2/display.o
 unconditionally to avoid an error when !CONFIG_OMAP2_DSS]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>

Fix below build warning:

  CC      arch/arm/mach-omap2/hwspinlock.o
In file included from arch/arm/mach-omap2/hwspinlock.c:22:
include/linux/hwspinlock.h: In function '__hwspin_unlock':
include/linux/hwspinlock.h:121: warning: 'return' with a value, in function returning void
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>

The "private_date" field in struct devfreq_dev_status almost certainly
wants to be "private_data"; since there are no in-tree users of this
functionality, now seems like an easy time to make the fix.
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Timers set by __set_chan_timer() should use miliseconds instead of
jiffies. Commit 942ecc9c updated
l2cap_set_timer() so it expects timeout to be specified in msecs
instead of jiffies. This makes timeouts unreliable when CONFIG_HZ
is not set to 1000.
Signed-off-by: NAndrzej Kaczmarek <andrzej.kaczmarek@tieto.com>
Signed-off-by: NGustavo F. Padovan <padovan@profusion.mobi>

This patch makes the cpuidle_states structure global (single copy)
instead of per-cpu. The statistics needed on per-cpu basis
by the governor are kept per-cpu. This simplifies the cpuidle
subsystem as state registration is done by single cpu only.
Having single copy of cpuidle_states saves memory. Rare case
of asymmetric C-states can be handled within the cpuidle driver
and architectures such as POWER do not have asymmetric C-states.

Having single/global registration of all the idle states,
dynamic C-state transitions on x86 are handled by
the boot cpu. Here, the boot cpu  would disable all the devices,
re-populate the states and later enable all the devices,
irrespective of the cpu that would receive the notification first.

Reference:
https://lkml.org/lkml/2011/4/25/83Signed-off-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: NTrinabh Gupta <g.trinabh@gmail.com>
Tested-by: NJean Pihet <j-pihet@ti.com>
Reviewed-by: NKevin Hilman <khilman@ti.com>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This is the first step towards global registration of cpuidle
states. The statistics used primarily by the governor are per-cpu
and have to be split from rest of the fields inside cpuidle_state,
which would be made global i.e. single copy. The driver_data field
is also per-cpu and moved.
Signed-off-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: NTrinabh Gupta <g.trinabh@gmail.com>
Tested-by: NJean Pihet <j-pihet@ti.com>
Reviewed-by: NKevin Hilman <khilman@ti.com>
Acked-by: NArjan van de Ven <arjan@linux.intel.com>
Acked-by: NKevin Hilman <khilman@ti.com>
Signed-off-by: NLen Brown <len.brown@intel.com>