Once JBD2_ABORT is set, ocfs2_commit_cache will fail in
ocfs2_commit_thread.  Then it will get into a loop with mass logs.  This
will meaninglessly consume a larger number of resource and may lead to
the system hanging.  So limit printk in this case.

[akpm@linux-foundation.org: document the msleep]
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are two standard techniques for dereferencing structures pointed
to by void *: cast to the right type each time they're used, or assign
to local variables of the right type.

But there's no need to do *both*.
Signed-off-by: NGeorge Spelvin <linux@horizon.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: NJoel Becker <jlbec@evilplan.org>
Reviewed-by: NJie Liu <jeff.liu@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace strncpy(size 63) by defined value.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Static values are automatically initialized to NULL.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Direct conversion of one KERN_DEBUG message without DEBUG definition
(suggested by Josh Triplett)

That message will now be disabled by default.  (see
Documentation/CodingStyle Chapter 13)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add ODEBUG: prefix to pr_fmt
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert all printk to pr_foo() except KERN_DEBUG (see
Documentation/CodingStyle Chapter 13)
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add pr_fmt based on module name.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix function parameter documentation

EXPORT_SYMBOLS moved after corresponding functions

Small coding style and checkpatch warning fixes
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Acked-by: NJoel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__uc32_ioremap_pfn_caller() should return NULL when the pfn is found to be
invalid.

From a recommendation by Guan Xuetao.

Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Fabian Frederick <fabf@skynet.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Coalesce formats.

[akpm@linux-foundation.org: undo crazy long line]
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update the last pr_warning callsite in fs branch
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__get_cpu_var() is used for multiple purposes in the kernel source.  One
of them is address calculation via the form &__get_cpu_var(x).  This
calculates the address for the instance of the percpu variable of the
current processor based on an offset.

Other use cases are for storing and retrieving data from the current
processors percpu area.  __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.

__get_cpu_var() is defined as :

#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))

__get_cpu_var() always only does an address determination.  However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.

This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset.  Thereby address calculations are avoided and less
registers are used when code is generated.

At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.

The patch set includes passes over all arches as well.  Once these
operations are used throughout then specialized macros can be defined in
non -x86 arches as well in order to optimize per cpu access by f.e.  using
a global register that may be set to the per cpu base.

Transformations done to __get_cpu_var()

1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);

3. Retrieve the content of the current processors instance of a per cpu
variable.

	DEFINE_PER_CPU(int, y);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(&x, this_cpu_ptr(&y), sizeof(x));

5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	__this_cpu_write(y, x);

6. Increment/Decrement etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	__this_cpu_inc(y)
Signed-off-by: NChristoph Lameter <cl@linux.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> [compilation only]
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Static values are automatically initialized to NULL.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Acked-by: NAnton Altaparmakov <anton@tuxera.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Without this patch fanotify_init does not validate the value passed in
event_f_flags.

When a fanotify event is read from the fanotify file descriptor a new
file descriptor is created where file.f_flags = event_f_flags.

Internal and external open flags are stored together in field f_flags of
struct file.  Hence, an application might create file descriptors with
internal flags like FMODE_EXEC, FMODE_NOCMTIME set.

Jan Kara and Eric Paris both aggreed that this is a bug and the value of
event_f_flags should be checked:
  https://lkml.org/lkml/2014/4/29/522
  https://lkml.org/lkml/2014/4/29/539

This updated patch version considers the comments by Michael Kerrisk in
  https://lkml.org/lkml/2014/5/4/10

With the patch the value of event_f_flags is checked.
When specifying an invalid value error EINVAL is returned.

Internal flags are disallowed.

File creation flags are disallowed:
O_CREAT, O_DIRECTORY, O_EXCL, O_NOCTTY, O_NOFOLLOW, O_TRUNC, and O_TTY_INIT.

Flags which do not make sense with fanotify are disallowed:
__O_TMPFILE, O_PATH, FASYNC, and O_DIRECT.

This leaves us with the following allowed values:

O_RDONLY, O_WRONLY, O_RDWR are basic functionality. The are stored in the
bits given by O_ACCMODE.

O_APPEND is working as expected. The value might be useful in a logging
application which appends the current status each time the log is opened.

O_LARGEFILE is needed for files exceeding 4GB on 32bit systems.

O_NONBLOCK may be useful when monitoring slow devices like tapes.

O_NDELAY is equal to O_NONBLOCK except for platform parisc.
To avoid code breaking on parisc either both flags should be
allowed or none. The patch allows both.

__O_SYNC and O_DSYNC may be used to avoid data loss on power disruption.

O_NOATIME may be useful to reduce disk activity.

O_CLOEXEC may be useful, if separate processes shall be used to scan files.

Once this patch is accepted, the fanotify_init.2 manpage has to be updated.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If fanotify_mark is called with illegal value of arguments flags and
marks it usually returns EINVAL.

When fanotify_mark is called with FAN_MARK_FLUSH the argument flags is
not checked for irrelevant flags like FAN_MARK_IGNORED_MASK.

The patch removes this inconsistency.

If an irrelevant flag is set error EINVAL is returned.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com>
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do not initialize private_destroy_list twice.  list_replace_init()
already takes care of initializing private_destroy_list.  We don't need
to initialize it with LIST_HEAD() beforehand.
Signed-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Before the patch, read creates FAN_ACCESS_PERM and FAN_ACCESS events,
readdir creates only FAN_ACCESS_PERM events.

This is inconsistent.

After the patch, readdir creates FAN_ACCESS_PERM and FAN_ACCESS events.
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Originally from Tvrtko Ursulin (https://lkml.org/lkml/2011/1/12/112)

Avoid having to provide a fake/invalid fd and path when flushing marks

Currently for a group to flush marks it has set it needs to provide a
fake or invalid (but resolvable) file descriptor and path when calling
fanotify_mark.  This patch pulls the flush handling a bit up so file
descriptor and path are completely ignored when flushing.

I reworked the patch to be applicable again (the signature of
fanotify_mark has changed since Tvrtko's work).
Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Reviewed-by: NJan Kara <jack@suse.cz>
Acked-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace seq_printf where possible + coalesce formats from 2 existing
seq_puts
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All printk converted to pr_foo() except internal.h: printk(KERN_DEBUG

Coalesce formats.

Add pr_fmt
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 786235ee ("kthread: make kthread_create() killable") meant
for allowing kthread_create() to abort as soon as killed by the
OOM-killer.  But returning -ENOMEM is wrong if killed by SIGKILL from
userspace.  Change kthread_create() to return -EINTR upon SIGKILL.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Oleg Nesterov <oleg@redhat.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [3.13+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently hugepage migration is available for all archs which support
pmd-level hugepage, but testing is done only for x86_64 and there're
bugs for other archs.  So to avoid breaking such archs, this patch
limits the availability strictly to x86_64 until developers of other
archs get interested in enabling this feature.

Simply disabling hugepage migration on non-x86_64 archs is not enough to
fix the reported problem where sys_move_pages() hits the BUG_ON() in
follow_page(FOLL_GET), so let's fix this by checking if hugepage
migration is supported in vma_migratable().
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: NMichael Ellerman <mpe@ellerman.id.au>
Tested-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Trinity reports BUG:

  sleeping function called from invalid context at kernel/locking/rwsem.c:47
  in_atomic(): 0, irqs_disabled(): 0, pid: 5787, name: trinity-c27

__might_sleep < down_write < __put_anon_vma < page_get_anon_vma <
migrate_pages < compact_zone < compact_zone_order < try_to_compact_pages ..

Right, since conversion to mutex then rwsem, we should not put_anon_vma()
from inside an rcu_read_lock()ed section: fix the two places that did so.
And add might_sleep() to anon_vma_free(), as suggested by Peter Zijlstra.

Fixes: 88c22088 ("mm: optimize page_lock_anon_vma() fast-path")
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NHugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Horiguchi-san has done most of the work on hwpoison in the last years
and he also does most of the reviewing.  So I'm passing on the hwpoison
maintainership to him.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Might as well be the get_maintainer maintainer...
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Recently added page-cache dumping is known to be a little bit racy.
But after race with truncate it just dies due to unhandled SIGBUS
when it tries to poke pages beyond the new end of file.
This patch adds handler for SIGBUS which skips the rest of the file.
Signed-off-by: NKonstantin Khlebnikov <koct9i@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge tag 'devicetree-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into next

Pull DeviceTree updates from Rob Herring:
 - Another round of clean-up of FDT related code in architecture code.
   This removes knowledge of internal FDT details from most
   architectures except powerpc.
 - Conversion of kernel's custom FDT parsing code to use libfdt.
 - DT based initialization for generic serial earlycon.  The
   introduction of generic serial earlycon support went in through the
   tty tree.
 - Improve the platform device naming for DT probed devices to ensure
   unique naming and use parent names instead of a global index.
 - Fix a race condition in of_update_property.
 - Unify the various linker section OF match tables and fix several
   function prototype errors.
 - Update platform_get_irq_byname to work in deferred probe cases.
 - 2 binding doc updates

* tag 'devicetree-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (58 commits)
  of: handle NULL node in next_child iterators
  of/irq: provide more wrappers for !CONFIG_OF
  devicetree: bindings: Document micrel vendor prefix
  dt: bindings: dwc2: fix required value for the phy-names property
  of_pci_irq: kill useless variable in of_irq_parse_pci()
  of/irq: do irq resolution in platform_get_irq_byname()
  of: Add a testcase for of_find_node_by_path()
  of: Make of_find_node_by_path() handle /aliases
  of: Create unlocked version of for_each_child_of_node()
  lib: add glibc style strchrnul() variant
  of: Handle memory@0 node on PPC32 only
  pci/of: Remove dead code
  of: fix race between search and remove in of_update_property()
  of: Use NULL for pointers
  of: Stop naming platform_device using dcr address
  of: Ensure unique names without sacrificing determinism
  tty/serial: pl011: add DT based earlycon support
  of/fdt: add FDT serial scanning for earlycon
  of/fdt: add FDT address translation support
  serial: earlycon: add DT support
  ...

Pull sound updates from Takashi Iwai:
 "At this time, majority of changes come from ASoC world while we got a
  few new drivers in other places for FireWire and USB.  There have been
  lots of ASoC core cleanups / refactoring, but very little visible to
  external users.

  ASoC:
   - Support for specifying aux CODECs in DT
   - Removal of the deprecated mux and enum macros
   - More moves towards full componentisation
   - Removal of some unused I/O code
   - Lots of cleanups, fixes and enhancements to the davinci, Freescale,
     Haswell and Realtek drivers
   - Several drivers exposed directly in Kconfig for use with
     simple-card
   - GPIO descriptor support for jacks
   - More updates and fixes to the Freescale SSI, Intel and rsnd drivers
   - New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651
     and ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and
     ADAU1781, and Realtek RT5677

  HD-audio:
   - Clean up Dell headset quirks
   - Noise fixes for Dell and Sony laptops
   - Thinkpad T440 dock fix
   - Realtek codec updates (ALC293,ALC233,ALC3235)
   - Tegra HD-audio HDMI support

  FireWire-audio:
   - FireWire audio stack enhancement (AMDTP, MIDI), support for
     incoming isochronous stream and duplex streams with timestamp
     synchronization
   - BeBoB-based devices support
   - Fireworks-based device support

  USB-audio:
   - Behringer BCD2000 USB device support

  Misc:
   - Clean up of a few old drivers, atmel, fm801, etc"

* tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (480 commits)
  ASoC: Fix wrong argument for card remove callbacks
  ASoC: free jack GPIOs before the sound card is freed
  ALSA: firewire-lib: Remove a comment about restriction of asynchronous operation
  ASoC: cache: Fix error code when not using ASoC level cache
  ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup
  ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop
  ALSA: firewire-lib: Use IEC 61883-6 compliant labels for Raw Audio data
  ASoC: add RT5677 CODEC driver
  ASoC: intel: The Baytrail/MAX98090 driver depends on I2C
  ASoC: rt5640: Add the function "get_clk_info" to RL6231 shared support
  ASoC: rt5640: Add the function of the PLL clock calculation to RL6231 shared support
  ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and RT5651
  ASoC: cache: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  ASoC: Add helper functions to cast from DAPM context to CODEC/platform
  ALSA: bebob: sizeof() vs ARRAY_SIZE() typo
  ASoC: wm9713: correct mono out PGA sources
  ALSA: synth: emux: soundfont.c: Cleaning up memory leak
  ASoC: fsl: Remove dependencies of boards for SND_SOC_EUKREA_TLV320
  ASoC: fsl-ssi: Use regmap
  ASoC: fsl-ssi: reorder and document fsl_ssi_private
  ...

Pull omap fbdev changes from Tomi Valkeinen:
 - DT support for the panel drivers that were still missing it
 - TI AM43xx support
 - TI OMAP5 support

* tag 'fbdev-omap-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (46 commits)
  OMAPDSS: move 'compatible' converter to omapdss driver
  OMAPDSS: HDMI: fix devm_ioremap_resource error checks
  OMAPDSS: HDMI: remove unused defines
  OMAPDSS: HDMI: cleanup WP ioremaps
  OMAPDSS: panel NEC-NL8048HL11 DT support
  Doc/DT: Add DT binding documentation for TPO td043mtea1 panel
  OMAPDSS: Panel TPO-TD043MTEA1 DT support
  Doc/DT: Add DT binding documentation for SHARP LS037V7DW01
  OMAPDSS: panel sharp-ls037v7dw01 DT support
  OMAPDSS: panel-sharp-ls037v7dw01: update to use gpiod
  Doc/DT: Add binding doc for lgphilips,lb035q02.txt
  OMAPDSS: panel-lgphilips-lb035q02: Add DT support
  OMAPDSS: panel-lgphilips-lb035q02: use gpiod for enable gpio
  OMAPDSS: hdmi5_core: Fix compilation with OMAP5_DSS_HDMI_AUDIO
  OMAPDSS: panel-dpi: enable-gpio
  OMAPDSS: Fix writes to DISPC_POL_FREQ
  Doc/DT: Add OMAP5 DSS DT bindings
  OMAPDSS: HDMI: cleanup ioremaps
  OMAPDSS: HDMI: Add OMAP5 HDMI support
  OMAPDSS: HDMI: PLL changes for OMAP5
  ...

Pull main fbdev changes from Tomi Valkeinen:
 "Mainly fixes and small improvements.  The biggest change seems to be
  backlight control support for mx3fb"

* tag 'fbdev-main-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (31 commits)
  drivers/video/fbdev/fb-puv3.c: Add header files for function unifb_mmap
  video: fbdev: s3fb.c: Fix for possible null pointer dereference
  video: fbdev: grvga.c: Fix for possible null pointer dereference
  matroxfb: perform a dummy read of M_STATUS
  video: of: display_timing: fix default native-mode setting
  video: delete unneeded call to platform_get_drvdata
  video: mx3fb: Add backlight control support
  video: omap: delete support for early fbmem allocation
  video: of: display_timing: remove two unsafe error messages
  fbdev: fbmem: remove positive test on unsigned values
  fbcon: Fix memory leak in con2fb_release_oldinfo()
  video: Kconfig: Add a dependency to the Goldfish framebuffer driver
  video: exynos: Add a dependency to the menu
  video: mx3fb: Use devm_kzalloc
  video/nuc900: allow modular build
  video: atmel needs FB_BACKLIGHT
  video: export fb_prepare_logo
  video/mbx: fix building debugfs support
  video/omap: fix modular build
  video: clarify I2C dependencies
  ...

Merge tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next

Pull ACPI and power management updates from Rafael Wysocki:
 "ACPICA is the leader this time (63 commits), followed by cpufreq (28
  commits), devfreq (15 commits), system suspend/hibernation (12
  commits), ACPI video and ACPI device enumeration (10 commits each).

  We have no major new features this time, but there are a few
  significant changes of how things work.  The most visible one will
  probably be that we are now going to create platform devices rather
  than PNP devices by default for ACPI device objects with _HID.  That
  was long overdue and will be really necessary to be able to use the
  same drivers for the same hardware blocks on ACPI and DT-based systems
  going forward.  We're not expecting fallout from this one (as usual),
  but it's something to watch nevertheless.

  The second change having a chance to be visible is that ACPI video
  will now default to using native backlight rather than the ACPI
  backlight interface which should generally help systems with broken
  Win8 BIOSes.  We're hoping that all problems with the native backlight
  handling that we had previously have been addressed and we are in a
  good enough shape to flip the default, but this change should be easy
  enough to revert if need be.

  In addition to that, the system suspend core has a new mechanism to
  allow runtime-suspended devices to stay suspended throughout system
  suspend/resume transitions if some extra conditions are met
  (generally, they are related to coordination within device hierarchy).
  However, enabling this feature requires cooperation from the bus type
  layer and for now it has only been implemented for the ACPI PM domain
  (used by ACPI-enumerated platform devices mostly today).

  Also, the acpidump utility that was previously shipped as a separate
  tool will now be provided by the upstream ACPICA along with the rest
  of ACPICA code, which will allow it to be more up to date and better
  supported, and we have one new cpuidle driver (ARM clps711x).

  The rest is improvements related to certain specific use cases,
  cleanups and fixes all over the place.

  Specifics:

   - ACPICA update to upstream version 20140424.  That includes a number
     of fixes and improvements related to things like GPE handling,
     table loading, headers, memory mapping and unmapping, DSDT/SSDT
     overriding, and the Unload() operator.  The acpidump utility from
     upstream ACPICA is included too.  From Bob Moore, Lv Zheng, David
     Box, David Binderman, and Colin Ian King.

   - Fixes and cleanups related to ACPI video and backlight interfaces
     from Hans de Goede.  That includes blacklist entries for some new
     machines and using native backlight by default.

   - ACPI device enumeration changes to create platform devices rather
     than PNP devices for ACPI device objects with _HID by default.  PNP
     devices will still be created for the ACPI device object with
     device IDs corresponding to real PNP devices, so that change should
     not break things left and right, and we're expecting to see more
     and more ACPI-enumerated platform devices in the future.  From
     Zhang Rui and Rafael J Wysocki.

   - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it
     to handle system suspend/resume on Asus T100 correctly.  From
     Heikki Krogerus and Rafael J Wysocki.

   - PM core update introducing a mechanism to allow runtime-suspended
     devices to stay suspended over system suspend/resume transitions if
     certain additional conditions related to coordination within device
     hierarchy are met.  Related PM documentation update and ACPI PM
     domain support for the new feature.  From Rafael J Wysocki.

   - Fixes and improvements related to the "freeze" sleep state.  They
     affect several places including cpuidle, PM core, ACPI core, and
     the ACPI battery driver.  From Rafael J Wysocki and Zhang Rui.

   - Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
     Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.

   - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
     Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony
     Camuso, and Toshi Kani.

   - System suspend/resume optimization in the ACPI battery driver from
     Lan Tianyu.

   - OPP (Operating Performance Points) subsystem updates from Chander
     Kashyap, Mark Brown, and Nishanth Menon.

   - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
     Stratos Karafotis, and Viresh Kumar.

   - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
     s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
     Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
     Viresh Kumar.

   - intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug
     Smythies, and Stratos Karafotis.

   - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.

   - Fix for the cpuidle menu governor from Chander Kashyap.

   - New ARM clps711x cpuidle driver from Alexander Shiyan.

   - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
     Fabian Frederick, Pali Rohár, and Sebastian Capella.

   - Intel RAPL (Running Average Power Limit) driver updates from Jacob
     Pan.

   - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.

   - devfreq core updates from Chanwoo Choi and Paul Bolle.

   - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
     Bartlomiej Zolnierkiewicz.

   - turbostat tool fix from Jean Delvare.

   - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
     and Thomas Renninger.

   - New ACPI ec_access.c tool for poking at the EC in a safe way from
     Thomas Renninger"

* tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits)
  ACPICA: Namespace: Remove _PRP method support.
  intel_pstate: Improve initial busy calculation
  intel_pstate: add sample time scaling
  intel_pstate: Correct rounding in busy calculation
  intel_pstate: Remove C0 tracking
  PM / hibernate: fixed typo in comment
  ACPI: Fix x86 regression related to early mapping size limitation
  ACPICA: Tables: Add mechanism to control early table checksum verification.
  ACPI / scan: use platform bus type by default for _HID enumeration
  ACPI / scan: always register ACPI LPSS scan handler
  ACPI / scan: always register memory hotplug scan handler
  ACPI / scan: always register container scan handler
  ACPI / scan: Change the meaning of missing .attach() in scan handlers
  ACPI / scan: introduce platform_id device PNP type flag
  ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
  ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
  ACPI / PNP: use device ID list for PNPACPI device enumeration
  ACPI / scan: .match() callback for ACPI scan handlers
  ACPI / battery: wakeup the system only when necessary
  power_supply: allow power supply devices registered w/o wakeup source
  ...

Pull HID patches from Jiri Kosina:
 - RMI driver for Synaptics touchpads, by Benjamin Tissoires, Andrew
   Duggan and Jiri Kosina
 - cleanup of hid-sony driver and improved support for Sixaxis and
   Dualshock 4, by Frank Praznik
 - other usual small fixes and support for new device IDs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (29 commits)
  HID: thingm: thingm_fwinfo[] doesn't need to be global
  HID: core: add two new usages for digitizer
  HID: hid-sensor-hub: new device id and quirk for STM Sensor hub
  HID: usbhid: enable NO_INIT_REPORTS quirk for Semico USB Keykoard
  HID: hid-sensor-hub: Set report quirk for Microsoft Surface
  HID: debug: add labels for HID Sensor Usages
  HID: uhid: Use kmemdup instead of kmalloc + memcpy
  HID: rmi: do not handle touchscreens through hid-rmi
  HID: quirk for Saitek RAT7 and MMO7 mices' mode button
  HID: core: fix validation of report id 0
  HID: rmi: fix masks for x and w_x data
  HID: rmi: fix wrong struct field name
  HID: rmi: do not fetch more than 16 bytes in a query
  HID: rmi: check for the existence of some optional queries before reading query 12
  HID: i2c-hid: hid report descriptor retrieval changes
  HID: add missing hid usages
  HID: hid-sony - allow 3rd party INTEC controller to turn off all leds
  HID: sony: Add blink support to the Sixaxis and DualShock 4 LEDs
  HID: sony: Initialize the controller LEDs with a device ID value
  HID: sony: Use the controller Bluetooth MAC address as the unique value in the battery name string
  ...

Pull trivial tree changes from Jiri Kosina:
 "Usual pile of patches from trivial tree that make the world go round"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
  staging: go7007: remove reference to CONFIG_KMOD
  aic7xxx: Remove obsolete preprocessor define
  of: dma: doc fixes
  doc: fix incorrect formula to calculate CommitLimit value
  doc: Note need of bc in the kernel build from 3.10 onwards
  mm: Fix printk typo in dmapool.c
  modpost: Fix comment typo "Modules.symvers"
  Kconfig.debug: Grammar s/addition/additional/
  wimax: Spelling s/than/that/, wording s/destinatary/recipient/
  aic7xxx: Spelling s/termnation/termination/
  arm64: mm: Remove superfluous "the" in comment
  of: Spelling s/anonymouns/anonymous/
  dma: imx-sdma: Spelling s/determnine/determine/
  ath10k: Improve grammar in comments
  ath6kl: Spelling s/determnine/determine/
  of: Improve grammar for of_alias_get_id() documentation
  drm/exynos: Spelling s/contro/control/
  radio-bcm2048.c: fix wrong overflow check
  doc: printk-formats: do not mention casts for u64/s64
  doc: spelling error changes
  ...

Pull KVM updates from Paolo Bonzini:
 "At over 200 commits, covering almost all supported architectures, this
  was a pretty active cycle for KVM.  Changes include:

   - a lot of s390 changes: optimizations, support for migration, GDB
     support and more

   - ARM changes are pretty small: support for the PSCI 0.2 hypercall
     interface on both the guest and the host (the latter acked by
     Catalin)

   - initial POWER8 and little-endian host support

   - support for running u-boot on embedded POWER targets

   - pretty large changes to MIPS too, completing the userspace
     interface and improving the handling of virtualized timer hardware

   - for x86, a larger set of changes is scheduled for 3.17.  Still, we
     have a few emulator bugfixes and support for running nested
     fully-virtualized Xen guests (para-virtualized Xen guests have
     always worked).  And some optimizations too.

  The only missing architecture here is ia64.  It's not a coincidence
  that support for KVM on ia64 is scheduled for removal in 3.17"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (203 commits)
  KVM: add missing cleanup_srcu_struct
  KVM: PPC: Book3S PR: Rework SLB switching code
  KVM: PPC: Book3S PR: Use SLB entry 0
  KVM: PPC: Book3S HV: Fix machine check delivery to guest
  KVM: PPC: Book3S HV: Work around POWER8 performance monitor bugs
  KVM: PPC: Book3S HV: Make sure we don't miss dirty pages
  KVM: PPC: Book3S HV: Fix dirty map for hugepages
  KVM: PPC: Book3S HV: Put huge-page HPTEs in rmap chain for base address
  KVM: PPC: Book3S HV: Fix check for running inside guest in global_invalidates()
  KVM: PPC: Book3S: Move KVM_REG_PPC_WORT to an unused register number
  KVM: PPC: Book3S: Add ONE_REG register names that were missed
  KVM: PPC: Add CAP to indicate hcall fixes
  KVM: PPC: MPIC: Reset IRQ source private members
  KVM: PPC: Graciously fail broken LE hypercalls
  PPC: ePAPR: Fix hypercall on LE guest
  KVM: PPC: BOOK3S: Remove open coded make_dsisr in alignment handler
  KVM: PPC: BOOK3S: Always use the saved DAR value
  PPC: KVM: Make NX bit available with magic page
  KVM: PPC: Disable NX for old magic page using guests
  KVM: PPC: BOOK3S: HV: Add mixed page-size support for guest
  ...

Pull jfs changes from Dave Kleikamp.

* tag 'jfs-3.16' of git://github.com/kleikamp/linux-shaggy:
  fs/jfs/super.c: convert simple_str to kstr
  fs/jfs/jfs_dmap.c: replace min/casting by min_t
  fs/jfs/super.c: remove 0 assignment to static + code clean-up
  fs/jfs/jfs_logmgr.c: remove NULL assignment on static
  JFS: Check for NULL before calling posix_acl_equiv_mode()
  fs/jfs/jfs_inode.c: atomically set inode->i_flags

Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw into next

Pull gfs2 updates from Steven Whitehouse:
 "This must be about the smallest merge window patch set ever for GFS2.
  It is probably also the first one without a single patch from me.
  That is down to a combination of factors, and I have some things in
  the works that are not quite ready yet, that I hope to put in next
  time around.

  Returning to what is here this time...  we have 3 patches which fix
  various warnings.  Two are bug fixes (for quotas and also a rare
  recovery race condition).  The final patch, from Ben Marzinski, is an
  important change in the freeze code which has been in progress for
  some time.  This removes the need to take and drop the transaction
  lock for every single transaction, when the only time it was used, was
  at file system freeze time.  Ben's patch integrates the freeze
  operation into the journal flush code as an alternative with lower
  overheads and also lands up resolving some difficult to fix races at
  the same time"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
  GFS2: Prevent recovery before the local journal is set
  GFS2: fs/gfs2/file.c: kernel-doc warning fixes
  GFS2: fs/gfs2/bmap.c: kernel-doc warning fixes
  GFS2: remove transaction glock
  GFS2: lops.c: replace 0 by NULL for pointers
  GFS2: quotas not being refreshed in gfs2_adjust_quota

Pull file locking changes from Jeff Layton:
 "Pretty quiet on the file-locking related front this cycle.  Just some
  small cleanups and the addition of some tracepoints in the lease
  handling code"

* tag 'locks-v3.16' of git://git.samba.org/jlayton/linux:
  locks: add some tracepoints in the lease handling code
  fs/locks.c: replace seq_printf by seq_puts
  locks: ensure that fl_owner is always initialized properly in flock and lease codepaths

Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 into next

Pull firewire updates from Stefan Richter:
 "IEEE 1394 (FireWire) subsystem changes: One optimization for some VIA
  controllers, one fix, one kconfig brushup"

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: enable MSI for VIA VT6315 rev 1, drop cycle timer quirk
  firewire: Use COMPILE_TEST for build testing
  firewire: net: fix NULL derefencing in fwnet_probe()