- 31 12月, 2006 40 次提交
-
-
由 Avi Kivity 提交于
__free_page() doesn't like a NULL argument, so check before calling it. A NULL can only happen if memory is exhausted during allocation of a memory slot. Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nguyen Anh Quynh 提交于
No need to append _MSR to msr names, a prefix should suffice. Signed-off-by: NNguyen Anh Quynh <aquynh@gmail.com> Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Avi Kivity 提交于
These msrs are referenced by benchmarking software when pretending to be an Intel cpu. Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Avi Kivity 提交于
Resolves sourceforge bug 1622229 (guest crashes running benchmark software). Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Yoshimi Ichiyanagi 提交于
The latest version of kvm doesn't initialize kvm_arch_ops in kvm_init(), which causes an error with the following sequence. 1. Load the supported arch's module. 2. Load the unsupported arch's module.$B!!(B(loading error) 3. Unload the unsupported arch's module. You'll get the following error message after step 3. "BUG: unable to handle to handle kernel paging request at virtual address xxxxxxxx" The problem here is that the unsupported arch's module overwrites kvm_arch_ops of the supported arch's module at step 2. This patch initializes kvm_arch_ops upon loading architecture specific kvm module, and prevents overwriting kvm_arch_ops when kvm_arch_ops is already set correctly. Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Avi Kivity 提交于
Instead of doing tricky stuff with the arch dependent virtualization registers, take a peek at the guest's efer. This simlifies some code, and fixes some confusion in the mmu branch. Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Avi Kivity 提交于
current_cpu_data invokes smp_processor_id(), which is inadvisable when preemption is enabled. Switch to boot_cpu_data instead. Resolves sourceforge bug 1621401. Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Sergei Shtylyov 提交于
The fallback to PIO mode in the hwif->dma_check() handler doesn't work in the Intel PIIX and SMsC SLC90E66 IDE drivers because: - config_drive_for_dma() calls the hwif->speedproc() handler with a wrong mode number (unbiased by XFER_PIO_0) in case of the PIO fallback; - hwif->tuneproc() handler doesn't really set the drive's own speed (this is not fixed as yet). Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: NBartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Sergei Shtylyov 提交于
There's no need to check in piix_config_drive_for_dma() for broken MW DMA mode 0 as this mode is not supported by the driver (it sets hwif->mwdma_mask to 0x6), and hence can't be selected by ide_dma_speed(). (Alan sayeth "Probably right but if not you've got a subtle corruptor. Should at least stick a BUG_ON mode 0 setting right close when the mode is set.") Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: NBartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
kernel/lockdep.c: In function `lookup_chain_cache': kernel/lockdep.c:1339: warning: long long unsigned int format, u64 arg (arg 2) kernel/lockdep.c:1344: warning: long long unsigned int format, u64 arg (arg 2) Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Arnaud Patard (Rtp 提交于
Russel King recently reminded us that one shouldn't use asm/arch/hardware.h but one should use asm/hardware.h. Unfortunately, the spi_s3c24xx_gpio driver is using the wrong header. This patch is fixing that. Signed-off-by: NArnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mike Frysinger 提交于
The KERNELDOC and DOCPROC variables are relative to the $(srctree)/$(objtree) and expect to be run only from there ... attached patch adds proper srctree/objtree prefixes to both variables. Acked-by: N"Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
fs/proc/base.c:1869: warning: initialization discards qualifiers from pointer target type fs/proc/base.c:2150: warning: initialization discards qualifiers from pointer target type Cc: Paul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Shantanu Goel 提交于
Fix a rather obvious buglet. Noticed while instrumenting the VM using /proc/vmstat. Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kyungmin Park 提交于
Fix apollon board compiler error Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kyungmin Park 提交于
Fix GPMC compiler errors on OMAP2 Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
Return a fault code if the Dataflash driver runs into a "no device present" error when the MISO line has a pulldown (it currently expects a pullup), so that rmmod won't oops. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
Fix build issues that show up with the m25p80 SPI flash driver when building with MTD debug enabled. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
Some issues were recently turned up with the current specification of what it means for spi_transfer.tx_buf to be null, as part of transfers which are (from the SPI protocol driver perspective) pure reads. Specifically, that it seems better to change the TX behaviour there from "undefined" to "will shift zeroes". This lets protocol drivers (like the ads7846 driver) depend on that behavior. It's what most controller drivers in the tree are already doing (with one exception and one case of driver wanting-to-oops), it's what Microwire hardware will necessarily be doing, and it removes an issue whereby certain security audits would need to define such a value anyway as part of removing covert channels. This patch changes the specification to require shifting zeroes, and updates all currently merged SPI controller drivers to do so. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Al Viro 提交于
(akpm: macros are wonderful) Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
RAID_UNKNOWN is used even when PROC_FS=n, so move it outside of the CONFIG_PROC_FS block. drivers/block/cciss.c:1910: error: 'RAID_UNKNOWN' undeclared (first use in this function) Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dimitri Gorokhovik 提交于
Recent cleanup of slab.h broke SLOB allocator: the routine kmem_cache_init has now the __init attribute for both slab.c and slob.c. This routine cannot be removed after init in the case of slob.c -- it serves as a timer callback. Provide a separate timer callback routine, call it once from kmem_cache_init, keep the __init attribute on the latter. Signed-off-by: NDimitri Gorokhovik <dimitri.gorokhovik@free.fr> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dimitri Gorokhovik 提交于
ramfs doesn't provide the .set_dirty_page a_op, and when the BLOCK layer is not configured in, 'set_page_dirty' makes a call via a NULL pointer. Signed-off-by: NDimitri Gorokhovik <dimitri.gorokhovik@free.fr> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Akinobu Mita 提交于
mod_sysfs_setup() doesn't return error when kobject_add_dir() failed. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Schwab 提交于
Signed-off-by: NAndreas Schwab <schwab@suse.de> Cc: "Yu, Luming" <luming.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Remove the __resched_legal() check: it is conceptually broken. The biggest problem it had is that it can mask buggy cond_resched() calls. A cond_resched() call is only legal if we are not in an atomic context, with two narrow exceptions: - if the system is booting - a reacquire_kernel_lock() down() done while PREEMPT_ACTIVE is set But __resched_legal() hid this and just silently returned whenever these primitives were called from invalid contexts. (Same goes for cond_resched_locked() and cond_resched_softirq()). Furthermore, the __legal_resched(0) call was buggy in that it caused unnecessarily long softirq latencies via cond_resched_softirq(). (which is only called from softirq-off sections, hence the code did nothing.) The fix is to resurrect the efficiency of the might_sleep checks and to only allow the narrow exceptions. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mikael Pettersson 提交于
include/linux/utsrelease.h and include/linux/version.h aren't removed any more by mrproper in kernel 2.6.20-rc2. The patch below fixes this. The definition of MRPROPER_FILES looks weird: generated-headers looks like a misspelling of generated_headers, but that one is a Makefile target, not a variable or a file, so I don't see how including it in MRPROPER_FILES could have any effect. Signed-off-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tilman Schmidt 提交于
While trying to develop a line discipline I found a couple of things worth mentioning in Documentation/tty.txt which weren't, so I decided to add them. It would be nice if someone more knowledgeable than me in that area would look over them, in case I got something wrong. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jiri Slaby 提交于
Many spinlock recursion was in the isicom driver. Eliminate it. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Soeren Sonnenburg 提交于
The apple fn keys don't work anymore with 2.6.20-rc1. The reason is that USB_HID_POWERBOOK appears in several files although USB_HIDINPUT_POWERBOOK is the thing to be used. The patch fixes this. Cc: Greg KH <greg@kroah.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric Moore 提交于
Update to maintainers list. My employer has changed the domain from lsil to lsi. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael S. Tsirkin 提交于
Commit bed8bdfd ("IB: kmemdup() cleanup") introduced one bad conversion to kmemdup() in mthca_alloc_fmr(), where the structure allocated and the structure copied are not the same size. Revert this back to the original kmalloc()/memcpy() code. Reported-by: Dotan Barak <dotanb@mellanox.co.il>. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <roland@digitalvampire.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jiri Slaby 提交于
tty_driver->owner is not set, so if somebody remove mxser_module, it might oops (and doesn't tell the user: no way, it's in use). Set the .owner value. Cc: <osv@javad.com> Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Don't have macros between a function's kernel-doc block and the function definition. This is not valid for kernel-doc. Warning(/var/linsrc/linux-2.6.20-rc1-git8//drivers/pci/probe.c:653): No description found for parameter 'IORESOURCE_PCI_FIXED' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Thomas Meyer 提交于
Due to the changes to make the kernel relocateable a new file is created during the build process. [jirislaby@gmail.com: The .gitigonre was intended to be in arch/ subtree] Signed-off-by: NThomas Meyer <thomas@m3y3r.de> Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 KAMEZAWA Hiroyuki 提交于
constrained_alloc(), which is called to detect where oom is from, checks passed zone_list(). If zone_list doesn't include all nodes, it thinks oom is from mempolicy. But there is memory-less-node. memory-less-node's zones are never included in zonelist[]. contstrained_alloc() should get memory_less_node into count. Otherwise, it always thinks 'oom is from mempolicy'. This means that current process dies at any time. This patch fix it. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Jackson <pj@sgi.com> Cc: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
Fix suspend hang: rcutorture threads need to be nofreeze. Signed-off-by: NIngo Molnar <mingo@elte.hu> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
WARN_ON() ever triggering is a kernel bug. Do not try to paper over this fact by suggesting to the user that this is 'only' a warning, as the following recent commit does: commit 30e25b71 Author: Jeremy Fitzhardinge <jeremy@goop.org> Date: Fri Dec 8 02:36:24 2006 -0800 [PATCH] Fix generic WARN_ON message A warning is a warning, not a BUG. ( it might make sense to rename BUG() to CRASH() and BUG_ON() to CRASH_ON(), but that does not change the fact that WARN_ON() signals a kernel bug. ) i and others objected to this change during lkml review: http://marc.theaimsgroup.com/?l=linux-kernel&m=116115160710533&w=2 still the change slipped upstream - grumble :) Also, use the standard "BUG: " format to make it easier to grep logs and to make it easier to google for kernel bugs. Signed-off-by: NIngo Molnar <mingo@elte.hu> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-