- 19 1月, 2017 1 次提交
-
-
由 Mao Wenan 提交于
Relax ordering(RO) is one feature of 82599 NIC, to enable this feature can enhance the performance for some cpu architecure, such as SPARC and so on. Currently it only supports one special cpu architecture(SPARC) in 82599 driver to enable RO feature, this is not very common for other cpu architecture which really needs RO feature. This patch add one common config CONFIG_ARCH_WANT_RELAX_ORDER to set RO feature, and should define CONFIG_ARCH_WANT_RELAX_ORDER in sparc Kconfig firstly. Signed-off-by: NMao Wenan <maowenan@huawei.com> Reviewed-by: NAlexander Duyck <alexander.duyck@gmail.com> Reviewed-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 12月, 2016 1 次提交
-
-
由 Thiago Jung Bauermann 提交于
Patch series "ima: carry the measurement list across kexec", v8. The TPM PCRs are only reset on a hard reboot. In order to validate a TPM's quote after a soft reboot (eg. kexec -e), the IMA measurement list of the running kernel must be saved and then restored on the subsequent boot, possibly of a different architecture. The existing securityfs binary_runtime_measurements file conveniently provides a serialized format of the IMA measurement list. This patch set serializes the measurement list in this format and restores it. Up to now, the binary_runtime_measurements was defined as architecture native format. The assumption being that userspace could and would handle any architecture conversions. With the ability of carrying the measurement list across kexec, possibly from one architecture to a different one, the per boot architecture information is lost and with it the ability of recalculating the template digest hash. To resolve this problem, without breaking the existing ABI, this patch set introduces the boot command line option "ima_canonical_fmt", which is arbitrarily defined as little endian. The need for this boot command line option will be limited to the existing version 1 format of the binary_runtime_measurements. Subsequent formats will be defined as canonical format (eg. TPM 2.0 support for larger digests). A simplified method of Thiago Bauermann's "kexec buffer handover" patch series for carrying the IMA measurement list across kexec is included in this patch set. The simplified method requires all file measurements be taken prior to executing the kexec load, as subsequent measurements will not be carried across the kexec and restored. This patch (of 10): The IMA kexec buffer allows the currently running kernel to pass the measurement list via a kexec segment to the kernel that will be kexec'd. The second kernel can check whether the previous kernel sent the buffer and retrieve it. This is the architecture-specific part which enables IMA to receive the measurement list passed by the previous kernel. It will be used in the next patch. The change in machine_kexec_64.c is to factor out the logic of removing an FDT memory reservation so that it can be used by remove_ima_buffer. Link: http://lkml.kernel.org/r/1480554346-29071-2-git-send-email-zohar@linux.vnet.ibm.comSigned-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Cc: Andreas Steffen <andreas.steffen@strongswan.org> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Cc: Josh Sklar <sklar@linux.vnet.ibm.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 12月, 2016 1 次提交
-
-
由 Allen Pais 提交于
Signed-off-by: NEric Saint Etienne <eric.saint.etienne@oracle.com> Signed-off-by: NAllen Pais <allen.pais@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 11月, 2016 1 次提交
-
-
由 Stanislaw Gruszka 提交于
Only s390 and powerpc have hardware facilities allowing to measure cputimes scaled by frequency. On all other architectures utimescaled/stimescaled are equal to utime/stime (however they are accounted separately). Remove {u,s}timescaled accounting on all architectures except powerpc and s390, where those values are explicitly accounted in the proper places. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161031162143.GB12646@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 09 11月, 2016 1 次提交
-
-
由 Kees Cook 提交于
In preparation for removing "depends on !COMPILE_TEST" from GCC_PLUGINS, the GCC_PLUGIN_CYC_COMPLEXITY plugin needs to gain the restriction, since it is mainly an example, and produces (intended) voluminous stderr reporting, which is generally undesirable for allyesconfig-style build tests. This additionally puts the plugin behind EXPERT and improves the help text. Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 11 10月, 2016 1 次提交
-
-
由 Emese Revfy 提交于
This adds a new gcc plugin named "latent_entropy". It is designed to extract as much possible uncertainty from a running system at boot time as possible, hoping to capitalize on any possible variation in CPU operation (due to runtime data differences, hardware differences, SMP ordering, thermal timing variation, cache behavior, etc). At the very least, this plugin is a much more comprehensive example for how to manipulate kernel code using the gcc plugin internals. The need for very-early boot entropy tends to be very architecture or system design specific, so this plugin is more suited for those sorts of special cases. The existing kernel RNG already attempts to extract entropy from reliable runtime variation, but this plugin takes the idea to a logical extreme by permuting a global variable based on any variation in code execution (e.g. a different value (and permutation function) is used to permute the global based on loop count, case statement, if/then/else branching, etc). To do this, the plugin starts by inserting a local variable in every marked function. The plugin then adds logic so that the value of this variable is modified by randomly chosen operations (add, xor and rol) and random values (gcc generates separate static values for each location at compile time and also injects the stack pointer at runtime). The resulting value depends on the control flow path (e.g., loops and branches taken). Before the function returns, the plugin mixes this local variable into the latent_entropy global variable. The value of this global variable is added to the kernel entropy pool in do_one_initcall() and _do_fork(), though it does not credit any bytes of entropy to the pool; the contents of the global are just used to mix the pool. Additionally, the plugin can pre-initialize arrays with build-time random contents, so that two different kernel builds running on identical hardware will not have the same starting values. Signed-off-by: NEmese Revfy <re.emese@gmail.com> [kees: expanded commit message and code comments] Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 22 9月, 2016 1 次提交
-
-
由 Nicholas Piggin 提交于
Enabling -ffunction-sections modified the generic linker script to pull .text.* sections into regular TEXT_TEXT section, conflicting with some architectures. Revert that change and require archs that enable the option to ensure they have no conflicting section names, and do the appropriate merging. Reported-by: NGuenter Roeck <linux@roeck-us.net> Tested-by: NGuenter Roeck <linux@roeck-us.net> Fixes: b67067f1 ("kbuild: allow archs to select link dead code/data elimination") Signed-off-by: NNicholas Piggin <npiggin@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.com>
-
- 09 9月, 2016 2 次提交
-
-
由 Nicholas Piggin 提交于
Introduce LD_DEAD_CODE_DATA_ELIMINATION option for architectures to select to build with -ffunction-sections, -fdata-sections, and link with --gc-sections. It requires some work (documented) to ensure all unreferenced entrypoints are live, and requires toolchain and build verification, so it is made a per-arch option for now. On a random powerpc64le build, this yelds a significant size saving, it boots and runs fine, but there is a lot I haven't tested as yet, so these savings may be reduced if there are bugs in the link. text data bss dec filename 11169741 1180744 1923176 14273661 vmlinux 10445269 1004127 1919707 13369103 vmlinux.dce ~700K text, ~170K data, 6% removed from kernel image size. Signed-off-by: NNicholas Piggin <npiggin@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.com>
-
由 Stephen Rothwell 提交于
ld -r is an incremental link used to create built-in.o files in build subdirectories. It produces relocatable object files containing all its input files, and these are are then pulled together and relocated in the final link. Aside from the bloat, this constrains the final link relocations, which has bitten large powerpc builds with unresolvable relocations in the final link. Alan Modra has recommended the kernel use thin archives for linking. This is an alternative and means that the linker has more information available to it when it links the kernel. This patch enables a config option architectures can select, which causes all built-in.o files to be built as thin archives. built-in.o files in subdirectories do not get symbol table or index attached, which improves speed and size. The final link pass creates a built-in.o archive in the root output directory which includes the symbol table and index. The linker then uses takes this file to link. The --whole-archive linker option is required, because the linker now has visibility to every individual object file, and it will otherwise just completely avoid including those without external references (consider a file with EXPORT_SYMBOL or initcall or hardware exceptions as its only entry points). The traditional built works "by luck" as built-in.o files are large enough that they're going to get external references. However this optimisation is unpredictable for the kernel (due to above external references), ineffective at culling unused, and costly because the .o files have to be searched for references. Superior alternatives for link-time culling should be used instead. Build characteristics for inclink vs thinarc, on a small powerpc64le pseries VM with a modest .config: inclink thinarc sizes vmlinux 15 618 680 15 625 028 sum of all built-in.o 56 091 808 1 054 334 sum excluding root built-in.o 151 430 find -name built-in.o | xargs rm ; time make vmlinux real 22.772s 21.143s user 13.280s 13.430s sys 4.310s 2.750s - Final kernel pulled in only about 6K more, which shows how ineffective the object file culling is. - Build performance looks improved due to less pagecache activity. On IO constrained systems it could be a bigger win. - Build size saving is significant. Side note, the toochain understands archives, so there's some tricks, $ ar t built-in.o # list all files you linked with $ size built-in.o # and their sizes $ objdump -d built-in.o # disassembly (unrelocated) with filenames Implementation by sfr, minor tweaks by npiggin. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NNicholas Piggin <npiggin@gmail.com> Signed-off-by: NMichal Marek <mmarek@suse.com>
-
- 08 9月, 2016 1 次提交
-
-
由 Mickaël Salaün 提交于
Fixes: 8112c4f1 ("seccomp: remove 2-phase API") Signed-off-by: NMickaël Salaün <mic@digikod.net> Acked-by: NKees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: James Morris <jmorris@namei.org> Signed-off-by: NJames Morris <james.l.morris@oracle.com> Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 24 8月, 2016 1 次提交
-
-
由 Andy Lutomirski 提交于
If CONFIG_VMAP_STACK=y is selected, kernel stacks are allocated with __vmalloc_node_range(). Grsecurity has had a similar feature (called GRKERNSEC_KSTACKOVERFLOW=y) for a long time. Signed-off-by: NAndy Lutomirski <luto@kernel.org> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/14c07d4fd173a5b117f51e8b939f9f4323e39899.1470907718.git.luto@kernel.org [ Minor edits. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 09 8月, 2016 1 次提交
-
-
由 Mickaël Salaün 提交于
Fixes: 8112c4f1 ("seccomp: remove 2-phase API") Signed-off-by: NMickaël Salaün <mic@digikod.net> Acked-by: NKees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: James Morris <jmorris@namei.org> Signed-off-by: NJames Morris <james.l.morris@oracle.com>
-
- 27 7月, 2016 2 次提交
-
-
由 Kees Cook 提交于
Since adding the gcc plugin development headers is required for the gcc plugin support, we should ease into this new kernel build dependency more slowly. For now, disable the gcc plugins under COMPILE_TEST so that all*config builds will skip it. Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NMichal Marek <mmarek@suse.com>
-
由 Kees Cook 提交于
This creates per-architecture function arch_within_stack_frames() that should validate if a given object is contained by a kernel stack frame. Initial implementation is on x86. This is based on code from PaX. Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 25 6月, 2016 1 次提交
-
-
由 Linus Torvalds 提交于
We've had the thread info allocated together with the thread stack for most architectures for a long time (since the thread_info was split off from the task struct), but that is about to change. But the patches that move the thread info to be off-stack (and a part of the task struct instead) made it clear how confused the allocator and freeing functions are. Because the common case was that we share an allocation with the thread stack and the thread_info, the two pointers were identical. That identity then meant that we would have things like ti = alloc_thread_info_node(tsk, node); ... tsk->stack = ti; which certainly _worked_ (since stack and thread_info have the same value), but is rather confusing: why are we assigning a thread_info to the stack? And if we move the thread_info away, the "confusing" code just gets to be entirely bogus. So remove all this confusion, and make it clear that we are doing the stack allocation by renaming and clarifying the function names to be about the stack. The fact that the thread_info then shares the allocation is an implementation detail, and not really about the allocation itself. This is a pure renaming and type fix: we pass in the same pointer, it's just that we clarify what the pointer means. The ia64 code that actually only has one single allocation (for all of task_struct, thread_info and kernel thread stack) now looks a bit odd, but since "tsk->stack" is actually not even used there, that oddity doesn't matter. It would be a separate thing to clean that up, I intentionally left the ia64 changes as a pure brute-force renaming and type change. Acked-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 6月, 2016 1 次提交
-
-
由 William Breathitt Gray 提交于
Several modern devices, such as PC/104 cards, are expected to run on modern systems via an ISA bus interface. Since ISA is a legacy interface for most modern architectures, ISA support should remain disabled in general. Support for ISA-style drivers should be enabled on a per driver basis. To allow ISA-style drivers on modern systems, this patch introduces the ISA_BUS_API and ISA_BUS Kconfig options. The ISA bus driver will now build conditionally on the ISA_BUS_API Kconfig option, which defaults to the legacy ISA Kconfig option. The ISA_BUS Kconfig option allows the ISA_BUS_API Kconfig option to be selected on architectures which do not enable ISA (e.g. X86_64). The ISA_BUS Kconfig option is currently only implemented for X86 architectures. Other architectures may have their own ISA_BUS Kconfig options added as required. Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWilliam Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 08 6月, 2016 3 次提交
-
-
由 Emese Revfy 提交于
The sancov gcc plugin inserts a __sanitizer_cov_trace_pc() call at the start of basic blocks. This plugin is a helper plugin for the kcov feature. It supports all gcc versions with plugin support (from gcc-4.5 on). It is based on the gcc commit "Add fuzzing coverage support" by Dmitry Vyukov (https://gcc.gnu.org/viewcvs/gcc?limit_changes=0&view=revision&revision=231296). Signed-off-by: NEmese Revfy <re.emese@gmail.com> Acked-by: NKees Cook <keescook@chromium.org> Signed-off-by: NMichal Marek <mmarek@suse.com>
-
由 Emese Revfy 提交于
Add a very simple plugin to demonstrate the GCC plugin infrastructure. This GCC plugin computes the cyclomatic complexity of each function. The complexity M of a function's control flow graph is defined as: M = E - N + 2P where E = the number of edges N = the number of nodes P = the number of connected components (exit nodes). Signed-off-by: NEmese Revfy <re.emese@gmail.com> Acked-by: NKees Cook <keescook@chromium.org> Signed-off-by: NMichal Marek <mmarek@suse.com>
-
由 Emese Revfy 提交于
This patch allows to build the whole kernel with GCC plugins. It was ported from grsecurity/PaX. The infrastructure supports building out-of-tree modules and building in a separate directory. Cross-compilation is supported too. Currently the x86, arm, arm64 and uml architectures enable plugins. The directory of the gcc plugins is scripts/gcc-plugins. You can use a file or a directory there. The plugins compile with these options: * -fno-rtti: gcc is compiled with this option so the plugins must use it too * -fno-exceptions: this is inherited from gcc too * -fasynchronous-unwind-tables: this is inherited from gcc too * -ggdb: it is useful for debugging a plugin (better backtrace on internal errors) * -Wno-narrowing: to suppress warnings from gcc headers (ipa-utils.h) * -Wno-unused-variable: to suppress warnings from gcc headers (gcc_version variable, plugin-version.h) The infrastructure introduces a new Makefile target called gcc-plugins. It supports all gcc versions from 4.5 to 6.0. The scripts/gcc-plugin.sh script chooses the proper host compiler (gcc-4.7 can be built by either gcc or g++). This script also checks the availability of the included headers in scripts/gcc-plugins/gcc-common.h. The gcc-common.h header contains frequently included headers for GCC plugins and it has a compatibility layer for the supported gcc versions. The gcc-generate-*-pass.h headers automatically generate the registration structures for GIMPLE, SIMPLE_IPA, IPA and RTL passes. Note that 'make clean' keeps the *.so files (only the distclean or mrproper targets clean all) because they are needed for out-of-tree modules. Based on work created by the PaX Team. Signed-off-by: NEmese Revfy <re.emese@gmail.com> Acked-by: NKees Cook <keescook@chromium.org> Signed-off-by: NMichal Marek <mmarek@suse.com>
-
- 29 5月, 2016 1 次提交
-
-
由 George Spelvin 提交于
This is just the infrastructure; there are no users yet. This is modelled on CONFIG_ARCH_RANDOM; a CONFIG_ symbol declares the existence of <asm/hash.h>. That file may define its own versions of various functions, and define HAVE_* symbols (no CONFIG_ prefix!) to suppress the generic ones. Included is a self-test (in lib/test_hash.c) that verifies the basics. It is NOT in general required that the arch-specific functions compute the same thing as the generic, but if a HAVE_* symbol is defined with the value 1, then equality is tested. Signed-off-by: NGeorge Spelvin <linux@sciencehorizons.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Philippe De Muyter <phdm@macq.eu> Cc: linux-m68k@lists.linux-m68k.org Cc: Alistair Francis <alistai@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp
-
- 21 5月, 2016 3 次提交
-
-
由 Zhaoxiu Zeng 提交于
The binary GCD algorithm is based on the following facts: 1. If a and b are all evens, then gcd(a,b) = 2 * gcd(a/2, b/2) 2. If a is even and b is odd, then gcd(a,b) = gcd(a/2, b) 3. If a and b are all odds, then gcd(a,b) = gcd((a-b)/2, b) = gcd((a+b)/2, b) Even on x86 machines with reasonable division hardware, the binary algorithm runs about 25% faster (80% the execution time) than the division-based Euclidian algorithm. On platforms like Alpha and ARMv6 where division is a function call to emulation code, it's even more significant. There are two variants of the code here, depending on whether a fast __ffs (find least significant set bit) instruction is available. This allows the unpredictable branches in the bit-at-a-time shifting loop to be eliminated. If fast __ffs is not available, the "even/odd" GCD variant is used. I use the following code to benchmark: #include <stdio.h> #include <stdlib.h> #include <stdint.h> #include <string.h> #include <time.h> #include <unistd.h> #define swap(a, b) \ do { \ a ^= b; \ b ^= a; \ a ^= b; \ } while (0) unsigned long gcd0(unsigned long a, unsigned long b) { unsigned long r; if (a < b) { swap(a, b); } if (b == 0) return a; while ((r = a % b) != 0) { a = b; b = r; } return b; } unsigned long gcd1(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; b >>= __builtin_ctzl(b); for (;;) { a >>= __builtin_ctzl(a); if (a == b) return a << __builtin_ctzl(r); if (a < b) swap(a, b); a -= b; } } unsigned long gcd2(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; r &= -r; while (!(b & r)) b >>= 1; for (;;) { while (!(a & r)) a >>= 1; if (a == b) return a; if (a < b) swap(a, b); a -= b; a >>= 1; if (a & r) a += b; a >>= 1; } } unsigned long gcd3(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; b >>= __builtin_ctzl(b); if (b == 1) return r & -r; for (;;) { a >>= __builtin_ctzl(a); if (a == 1) return r & -r; if (a == b) return a << __builtin_ctzl(r); if (a < b) swap(a, b); a -= b; } } unsigned long gcd4(unsigned long a, unsigned long b) { unsigned long r = a | b; if (!a || !b) return r; r &= -r; while (!(b & r)) b >>= 1; if (b == r) return r; for (;;) { while (!(a & r)) a >>= 1; if (a == r) return r; if (a == b) return a; if (a < b) swap(a, b); a -= b; a >>= 1; if (a & r) a += b; a >>= 1; } } static unsigned long (*gcd_func[])(unsigned long a, unsigned long b) = { gcd0, gcd1, gcd2, gcd3, gcd4, }; #define TEST_ENTRIES (sizeof(gcd_func) / sizeof(gcd_func[0])) #if defined(__x86_64__) #define rdtscll(val) do { \ unsigned long __a,__d; \ __asm__ __volatile__("rdtsc" : "=a" (__a), "=d" (__d)); \ (val) = ((unsigned long long)__a) | (((unsigned long long)__d)<<32); \ } while(0) static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long), unsigned long a, unsigned long b, unsigned long *res) { unsigned long long start, end; unsigned long long ret; unsigned long gcd_res; rdtscll(start); gcd_res = gcd(a, b); rdtscll(end); if (end >= start) ret = end - start; else ret = ~0ULL - start + 1 + end; *res = gcd_res; return ret; } #else static inline struct timespec read_time(void) { struct timespec time; clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &time); return time; } static inline unsigned long long diff_time(struct timespec start, struct timespec end) { struct timespec temp; if ((end.tv_nsec - start.tv_nsec) < 0) { temp.tv_sec = end.tv_sec - start.tv_sec - 1; temp.tv_nsec = 1000000000ULL + end.tv_nsec - start.tv_nsec; } else { temp.tv_sec = end.tv_sec - start.tv_sec; temp.tv_nsec = end.tv_nsec - start.tv_nsec; } return temp.tv_sec * 1000000000ULL + temp.tv_nsec; } static unsigned long long benchmark_gcd_func(unsigned long (*gcd)(unsigned long, unsigned long), unsigned long a, unsigned long b, unsigned long *res) { struct timespec start, end; unsigned long gcd_res; start = read_time(); gcd_res = gcd(a, b); end = read_time(); *res = gcd_res; return diff_time(start, end); } #endif static inline unsigned long get_rand() { if (sizeof(long) == 8) return (unsigned long)rand() << 32 | rand(); else return rand(); } int main(int argc, char **argv) { unsigned int seed = time(0); int loops = 100; int repeats = 1000; unsigned long (*res)[TEST_ENTRIES]; unsigned long long elapsed[TEST_ENTRIES]; int i, j, k; for (;;) { int opt = getopt(argc, argv, "n:r:s:"); /* End condition always first */ if (opt == -1) break; switch (opt) { case 'n': loops = atoi(optarg); break; case 'r': repeats = atoi(optarg); break; case 's': seed = strtoul(optarg, NULL, 10); break; default: /* You won't actually get here. */ break; } } res = malloc(sizeof(unsigned long) * TEST_ENTRIES * loops); memset(elapsed, 0, sizeof(elapsed)); srand(seed); for (j = 0; j < loops; j++) { unsigned long a = get_rand(); /* Do we have args? */ unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand(); unsigned long long min_elapsed[TEST_ENTRIES]; for (k = 0; k < repeats; k++) { for (i = 0; i < TEST_ENTRIES; i++) { unsigned long long tmp = benchmark_gcd_func(gcd_func[i], a, b, &res[j][i]); if (k == 0 || min_elapsed[i] > tmp) min_elapsed[i] = tmp; } } for (i = 0; i < TEST_ENTRIES; i++) elapsed[i] += min_elapsed[i]; } for (i = 0; i < TEST_ENTRIES; i++) printf("gcd%d: elapsed %llu\n", i, elapsed[i]); k = 0; srand(seed); for (j = 0; j < loops; j++) { unsigned long a = get_rand(); unsigned long b = argc > optind ? strtoul(argv[optind], NULL, 10) : get_rand(); for (i = 1; i < TEST_ENTRIES; i++) { if (res[j][i] != res[j][0]) break; } if (i < TEST_ENTRIES) { if (k == 0) { k = 1; fprintf(stderr, "Error:\n"); } fprintf(stderr, "gcd(%lu, %lu): ", a, b); for (i = 0; i < TEST_ENTRIES; i++) fprintf(stderr, "%ld%s", res[j][i], i < TEST_ENTRIES - 1 ? ", " : "\n"); } } if (k == 0) fprintf(stderr, "PASS\n"); free(res); return 0; } Compiled with "-O2", on "VirtualBox 4.4.0-22-generic #38-Ubuntu x86_64" got: zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 10174 gcd1: elapsed 2120 gcd2: elapsed 2902 gcd3: elapsed 2039 gcd4: elapsed 2812 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9309 gcd1: elapsed 2280 gcd2: elapsed 2822 gcd3: elapsed 2217 gcd4: elapsed 2710 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9589 gcd1: elapsed 2098 gcd2: elapsed 2815 gcd3: elapsed 2030 gcd4: elapsed 2718 PASS zhaoxiuzeng@zhaoxiuzeng-VirtualBox:~/develop$ ./gcd -r 500000 -n 10 gcd0: elapsed 9914 gcd1: elapsed 2309 gcd2: elapsed 2779 gcd3: elapsed 2228 gcd4: elapsed 2709 PASS [akpm@linux-foundation.org: avoid #defining a CONFIG_ variable] Signed-off-by: NZhaoxiu Zeng <zhaoxiu.zeng@gmail.com> Signed-off-by: NGeorge Spelvin <linux@horizon.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Petr Mladek 提交于
printk() takes some locks and could not be used a safe way in NMI context. The chance of a deadlock is real especially when printing stacks from all CPUs. This particular problem has been addressed on x86 by the commit a9edc880 ("x86/nmi: Perform a safe NMI stack trace on all CPUs"). The patchset brings two big advantages. First, it makes the NMI backtraces safe on all architectures for free. Second, it makes all NMI messages almost safe on all architectures (the temporary buffer is limited. We still should keep the number of messages in NMI context at minimum). Note that there already are several messages printed in NMI context: WARN_ON(in_nmi()), BUG_ON(in_nmi()), anything being printed out from MCE handlers. These are not easy to avoid. This patch reuses most of the code and makes it generic. It is useful for all messages and architectures that support NMI. The alternative printk_func is set when entering and is reseted when leaving NMI context. It queues IRQ work to copy the messages into the main ring buffer in a safe context. __printk_nmi_flush() copies all available messages and reset the buffer. Then we could use a simple cmpxchg operations to get synchronized with writers. There is also used a spinlock to get synchronized with other flushers. We do not longer use seq_buf because it depends on external lock. It would be hard to make all supported operations safe for a lockless use. It would be confusing and error prone to make only some operations safe. The code is put into separate printk/nmi.c as suggested by Steven Rostedt. It needs a per-CPU buffer and is compiled only on architectures that call nmi_enter(). This is achieved by the new HAVE_NMI Kconfig flag. The are MN10300 and Xtensa architectures. We need to clean up NMI handling there first. Let's do it separately. The patch is heavily based on the draft from Peter Zijlstra, see https://lkml.org/lkml/2015/6/10/327 [arnd@arndb.de: printk-nmi: use %zu format string for size_t] [akpm@linux-foundation.org: min_t->min - all types are size_t here] Signed-off-by: NPetr Mladek <pmladek@suse.com> Suggested-by: NPeter Zijlstra <peterz@infradead.org> Suggested-by: NSteven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> [arm part] Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jiri Kosina <jkosina@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: David Miller <davem@davemloft.net> Cc: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Slaby 提交于
Define HAVE_EXIT_THREAD for archs which want to do something in exit_thread. For others, let's define exit_thread as an empty inline. This is a cleanup before we change the prototype of exit_thread to accept a task parameter. [akpm@linux-foundation.org: fix mips] Signed-off-by: NJiri Slaby <jslaby@suse.cz> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Jonas Bonn <jonas@southpole.se> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 29 2月, 2016 1 次提交
-
-
由 Josh Poimboeuf 提交于
Add a CONFIG_STACK_VALIDATION option which will run "objtool check" for each .o file to ensure the validity of its stack metadata. Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at> Cc: Borislav Petkov <bp@alien8.de> Cc: Chris J Arges <chris.j.arges@canonical.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Pedro Alves <palves@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/92baab69a6bf9bc7043af0bfca9fb964a1d45546.1456719558.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 21 1月, 2016 2 次提交
-
-
由 Christoph Hellwig 提交于
Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NValentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
This series converts all remaining architectures to use dma_map_ops and the generic implementation of the DMA API. This not only simplifies the code a lot, but also prepares for possible future changes like more generic non-iommu dma_ops implementations or generic per-device dma_map_ops. This patch (of 16): We have a couple architectures that do not want to support this code, so add another Kconfig symbol that disables the code similar to what we do for the nommu case. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Steven Miao <realmz6@gmail.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 1月, 2016 1 次提交
-
-
由 Daniel Cashman 提交于
Address Space Layout Randomization (ASLR) provides a barrier to exploitation of user-space processes in the presence of security vulnerabilities by making it more difficult to find desired code/data which could help an attack. This is done by adding a random offset to the location of regions in the process address space, with a greater range of potential offset values corresponding to better protection/a larger search-space for brute force, but also to greater potential for fragmentation. The offset added to the mmap_base address, which provides the basis for the majority of the mappings for a process, is set once on process exec in arch_pick_mmap_layout() and is done via hard-coded per-arch values, which reflect, hopefully, the best compromise for all systems. The trade-off between increased entropy in the offset value generation and the corresponding increased variability in address space fragmentation is not absolute, however, and some platforms may tolerate higher amounts of entropy. This patch introduces both new Kconfig values and a sysctl interface which may be used to change the amount of entropy used for offset generation on a system. The direct motivation for this change was in response to the libstagefright vulnerabilities that affected Android, specifically to information provided by Google's project zero at: http://googleprojectzero.blogspot.com/2015/09/stagefrightened.html The attack presented therein, by Google's project zero, specifically targeted the limited randomness used to generate the offset added to the mmap_base address in order to craft a brute-force-based attack. Concretely, the attack was against the mediaserver process, which was limited to respawning every 5 seconds, on an arm device. The hard-coded 8 bits used resulted in an average expected success rate of defeating the mmap ASLR after just over 10 minutes (128 tries at 5 seconds a piece). With this patch, and an accompanying increase in the entropy value to 16 bits, the same attack would take an average expected time of over 45 hours (32768 tries), which makes it both less feasible and more likely to be noticed. The introduced Kconfig and sysctl options are limited by per-arch minimum and maximum values, the minimum of which was chosen to match the current hard-coded value and the maximum of which was chosen so as to give the greatest flexibility without generating an invalid mmap_base address, generally a 3-4 bits less than the number of bits in the user-space accessible virtual address space. When decided whether or not to change the default value, a system developer should consider that mmap_base address could be placed anywhere up to 2^(value) bits away from the non-randomized location, which would introduce variable-sized areas above and below the mmap_base address such that the maximum vm_area_struct size may be reduced, preventing very large allocations. This patch (of 4): ASLR only uses as few as 8 bits to generate the random offset for the mmap base address on 32 bit architectures. This value was chosen to prevent a poorly chosen value from dividing the address space in such a way as to prevent large allocations. This may not be an issue on all platforms. Allow the specification of a minimum number of bits so that platforms desiring greater ASLR protection may determine where to place the trade-off. Signed-off-by: NDaniel Cashman <dcashman@google.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: NKees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Don Zickus <dzickus@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Rientjes <rientjes@google.com> Cc: Mark Salyzyn <salyzyn@android.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Nick Kralevich <nnk@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Borislav Petkov <bp@suse.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 9月, 2015 1 次提交
-
-
由 Dave Young 提交于
There are two kexec load syscalls, kexec_load another and kexec_file_load. kexec_file_load has been splited as kernel/kexec_file.c. In this patch I split kexec_load syscall code to kernel/kexec.c. And add a new kconfig option KEXEC_CORE, so we can disable kexec_load and use kexec_file_load only, or vice verse. The original requirement is from Ted Ts'o, he want kexec kernel signature being checked with CONFIG_KEXEC_VERIFY_SIG enabled. But kexec-tools use kexec_load syscall can bypass the checking. Vivek Goyal proposed to create a common kconfig option so user can compile in only one syscall for loading kexec kernel. KEXEC/KEXEC_FILE selects KEXEC_CORE so that old config files still work. Because there's general code need CONFIG_KEXEC_CORE, so I updated all the architecture Kconfig with a new option KEXEC_CORE, and let KEXEC selects KEXEC_CORE in arch Kconfig. Also updated general kernel code with to kexec_load syscall. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NDave Young <dyoung@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Petr Tesarik <ptesarik@suse.cz> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 8月, 2015 1 次提交
-
-
由 Oleg Nesterov 提交于
Remove CONFIG_PERCPU_RWSEM, the next patch adds the unconditional user of percpu_rw_semaphore. Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
- 03 8月, 2015 1 次提交
-
-
由 Peter Zijlstra 提交于
Add a little selftest that validates all combinations. Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 18 7月, 2015 1 次提交
-
-
由 Ingo Molnar 提交于
Don't burden architectures without dynamic task_struct sizing with the overhead of dynamic sizing. Also optimize the x86 code a bit by caching task_struct_size. Acked-and-Tested-by: NDave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1437128892-9831-3-git-send-email-mingo@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 26 6月, 2015 1 次提交
-
-
由 Josh Triplett 提交于
clone has some of the quirkiest syscall handling in the kernel, with a pile of special cases, historical curiosities, and architecture-specific calling conventions. In particular, clone with CLONE_SETTLS accepts a parameter "tls" that the C entry point completely ignores and some assembly entry points overwrite; instead, the low-level arch-specific code pulls the tls parameter out of the arch-specific register captured as part of pt_regs on entry to the kernel. That's a massive hack, and it makes the arch-specific code only work when called via the specific existing syscall entry points; because of this hack, any new clone-like system call would have to accept an identical tls argument in exactly the same arch-specific position, rather than providing a unified system call entry point across architectures. The first patch allows architectures to handle the tls argument via normal C parameter passing, if they opt in by selecting HAVE_COPY_THREAD_TLS. The second patch makes 32-bit and 64-bit x86 opt into this. These two patches came out of the clone4 series, which isn't ready for this merge window, but these first two cleanup patches were entirely uncontroversial and have acks. I'd like to go ahead and submit these two so that other architectures can begin building on top of this and opting into HAVE_COPY_THREAD_TLS. However, I'm also happy to wait and send these through the next merge window (along with v3 of clone4) if anyone would prefer that. This patch (of 2): clone with CLONE_SETTLS accepts an argument to set the thread-local storage area for the new thread. sys_clone declares an int argument tls_val in the appropriate point in the argument list (based on the various CLONE_BACKWARDS variants), but doesn't actually use or pass along that argument. Instead, sys_clone calls do_fork, which calls copy_process, which calls the arch-specific copy_thread, and copy_thread pulls the corresponding syscall argument out of the pt_regs captured at kernel entry (knowing what argument of clone that architecture passes tls in). Apart from being awful and inscrutable, that also only works because only one code path into copy_thread can pass the CLONE_SETTLS flag, and that code path comes from sys_clone with its architecture-specific argument-passing order. This prevents introducing a new version of the clone system call without propagating the same architecture-specific position of the tls argument. However, there's no reason to pull the argument out of pt_regs when sys_clone could just pass it down via C function call arguments. Introduce a new CONFIG_HAVE_COPY_THREAD_TLS for architectures to opt into, and a new copy_thread_tls that accepts the tls parameter as an additional unsigned long (syscall-argument-sized) argument. Change sys_clone's tls argument to an unsigned long (which does not change the ABI), and pass that down to copy_thread_tls. Architectures that don't opt into copy_thread_tls will continue to ignore the C argument to sys_clone in favor of the pt_regs captured at kernel entry, and thus will be unable to introduce new versions of the clone syscall. Patch co-authored by Josh Triplett and Thiago Macieira. Signed-off-by: NJosh Triplett <josh@joshtriplett.org> Acked-by: NAndy Lutomirski <luto@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thiago Macieira <thiago.macieira@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 4月, 2015 4 次提交
-
-
由 Kees Cook 提交于
The arch_randomize_brk() function is used on several architectures, even those that don't support ET_DYN ASLR. To avoid bulky extern/#define tricks, consolidate the support under CONFIG_ARCH_HAS_ELF_RANDOMIZE for the architectures that support it, while still handling CONFIG_COMPAT_BRK. Signed-off-by: NKees Cook <keescook@chromium.org> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: NIngo Molnar <mingo@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "David A. Long" <dave.long@linaro.org> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Arun Chandran <achandran@mvista.com> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Min-Hua Chen <orca.chen@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Vineeth Vijayan <vvijayan@mvista.com> Cc: Jeff Bailey <jeffbailey@google.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Behan Webster <behanw@converseincode.com> Cc: Ismael Ripoll <iripoll@upv.es> Cc: Jan-Simon Mller <dl9pf@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
When an architecture fully supports randomizing the ELF load location, a per-arch mmap_rnd() function is used to find a randomized mmap base. In preparation for randomizing the location of ET_DYN binaries separately from mmap, this renames and exports these functions as arch_mmap_rnd(). Additionally introduces CONFIG_ARCH_HAS_ELF_RANDOMIZE for describing this feature on architectures that support it (which is a superset of ARCH_BINFMT_ELF_RANDOMIZE_PIE, since s390 already supports a separated ET_DYN ASLR from mmap ASLR without the ARCH_BINFMT_ELF_RANDOMIZE_PIE logic). Signed-off-by: NKees Cook <keescook@chromium.org> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Russell King <linux@arm.linux.org.uk> Reviewed-by: NIngo Molnar <mingo@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "David A. Long" <dave.long@linaro.org> Cc: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Arun Chandran <achandran@mvista.com> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Min-Hua Chen <orca.chen@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Vineeth Vijayan <vvijayan@mvista.com> Cc: Jeff Bailey <jeffbailey@google.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Behan Webster <behanw@converseincode.com> Cc: Ismael Ripoll <iripoll@upv.es> Cc: Jan-Simon Mller <dl9pf@gmx.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Toshi Kani 提交于
Add ioremap_pud_enabled() and ioremap_pmd_enabled(), which return 1 when I/O mappings with pud/pmd are enabled on the kernel. ioremap_huge_init() calls arch_ioremap_pud_supported() and arch_ioremap_pmd_supported() to initialize the capabilities at boot-time. A new kernel option "nohugeiomap" is also added, so that user can disable the huge I/O map capabilities when necessary. Signed-off-by: NToshi Kani <toshi.kani@hp.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Robert Elliott <Elliott@hp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
By this time all architectures which support more than two page table levels should be covered. This patch add default definiton of PGTABLE_LEVELS equal 2. We also add assert to detect inconsistence between CONFIG_PGTABLE_LEVELS and __PAGETABLE_PMD_FOLDED/__PAGETABLE_PUD_FOLDED. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Tested-by: NGuenter Roeck <linux@roeck-us.net> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 4月, 2015 1 次提交
-
-
由 Anton Blanchard 提交于
We want to enable the hard lockup detector on ppc64, but right now that enables the oprofile NMI timer too. We'd prefer not to enable the oprofile NMI timer, it adds another element to our PMU testing and it requires us to increase our exported symbols (eg cpu_khz). Modify the config entry for OPROFILE_NMI_TIMER to disable it on PPC64. Signed-off-by: NAnton Blanchard <anton@samba.org> Acked-by: NRobert Richter <rric@kernel.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 04 9月, 2014 1 次提交
-
-
由 Andy Lutomirski 提交于
The description of how archs should implement seccomp filters was still strictly correct, but it failed to describe the newly available optimizations. Signed-off-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 19 7月, 2014 1 次提交
-
-
由 Kees Cook 提交于
This adds the new "seccomp" syscall with both an "operation" and "flags" parameter for future expansion. The third argument is a pointer value, used with the SECCOMP_SET_MODE_FILTER operation. Currently, flags must be 0. This is functionally equivalent to prctl(PR_SET_SECCOMP, ...). In addition to the TSYNC flag later in this patch series, there is a non-zero chance that this syscall could be used for configuring a fixed argument area for seccomp-tracer-aware processes to pass syscall arguments in the future. Hence, the use of "seccomp" not simply "seccomp_add_filter" for this syscall. Additionally, this syscall uses operation, flags, and user pointer for arguments because strictly passing arguments via a user pointer would mean seccomp itself would be unable to trivially filter the seccomp syscall itself. Signed-off-by: NKees Cook <keescook@chromium.org> Reviewed-by: NOleg Nesterov <oleg@redhat.com> Reviewed-by: NAndy Lutomirski <luto@amacapital.net>
-
- 19 3月, 2014 1 次提交
-
-
由 David A. Long 提交于
Suggested change from Oleg Nesterov. Fixes incomplete dependencies for uprobes feature. Signed-off-by: NDavid A. Long <dave.long@linaro.org> Acked-by: NOleg Nesterov <oleg@redhat.com>
-