SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30804a
Signed-off-by: NBarry Naujok <bnaujok@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

xfs_bmap_last_offset() can fail and return an error.
xfs_iomap_write_allocate() fails to detect and propagate the error.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30802a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

xfs_free_extent() can fail, but log recovery never bothers to check if it
successfully free the extent it was supposed to. This could lead to silent
corruption during log recovery. Abort log recovery if we fail to free an
extent.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30801a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

block_truncate_page() can return errors that we currently ignore and
silently discard. We should not ever get errors reported here - an error
indicates a bug somewhere else. Hence catch the error and issue a stack
dump to the syslog because we cannot propagate the error any further up
the call chain.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30800a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Mark it void.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30798a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

xfs_alloc_compute_aligned() returns a value based on a comparison of the
computed extent length and the minimum length allowed. This is only used
by some callers - the other four return parameters are used more often.
Hence move the comparison to the code that actually needs to do it and
make xfs_alloc_compute_aligned() a void function.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30797a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

xfs_alloc_search_busy() returns an index into the busy array if the extent
was found in the array. This is never checked, and the
xfs_alloc_search_busy() does a log force to prevent reuse of the extent
before the free transaction hits the disk. Hence the return value is
useless. Declare the function void and remove the slot number from the
tracing as well.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30796a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

xfs_trans_commit() can return errors when there are problems in the
transaction subsystem. They are indicative that the entire transaction may
be incomplete, and hence the error should be propagated as there is a good
possibility that there is something fatally wrong in the filesystem. Catch
and propagate or warn about commit errors in the places where they are
currently ignored.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30795a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

xfs_trans_reserve() reports errors that should not be ignored. For
example, a shutdown filesystem will report errors through
xfs_trans_reserve() to prevent further changes from being attempted on a
damaged filesystem. Catch and propagate all error conditions from
xfs_trans_reserve().

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30794a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Removing an ACL can return an error. Propagate it.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30793a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Propagate the error status from xfs_acl_setmode() so that callers know if
the ACl was set correctly or not.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30792a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Truncating the quota files can silently fail. Ensure that truncation
errors are propagated to the callers.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30791a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

When turning off quota, we need to write various transactions to the log
to ensure that they are cleanly removed in the case of a crash. We need to
check that the transactions hit the disk correctly. If we fail to write
the final quota off transaction, we are corrupt in memory and so the only
option is to shut the filesystem down at this point.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30790a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Warn to the syslog if we fail to reset the quota flags in the superblock
when a quota check fails.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30789a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

xfs_qm_mount_quotas() returns an error status that is ignored. If we fail
to mount quotas, we continue with quota's turned off, which is all handled
inside xfs_qm_mount_quotas(). Mark it as void to indicate that errors need
not be returned to the callers.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30788a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

xfs_qm_dqflush() can fail, but the return is not checked anywhere. Hence
we never know if we've failed to flush a dquot to disk. Propagate the
error and warn to the syslog if a flush ever fails.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30787a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

xfs_qm_dqflush_all() can return flush errors. Ensure they are propagated
into the quotacheck code to determine if the quotacheck succeeded or not.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30786a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Declare it void.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30785a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

xfs_reserve_blocks() can fail in interesting ways. In neither case is it a
fatal error, but the result can lead to sub-optimal behaviour. Warn to the
syslog if the call fails but otherwise continue.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30784a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Mark it void.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30782a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Makes it simpler to annotate function prototypes with __must_check via sed
scripts.

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30781a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

SGI-PV: 980084
SGI-Modid: xfs-linux-melb:xfs-kern:30780a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

This target component validation is not POSIX conformant and it is not
done by any other Linux filesystem so remove it from XFS.

SGI-PV: 980080
SGI-Modid: xfs-linux-melb:xfs-kern:30776a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

__FUNCTION__ is gcc-specific, use __func__

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30775a
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Remove the remaining uses of __inline in the XFS code base.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30774a
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Recent changes to xlog_state_release_iclog() placed the grant_lock inside
the icloglock. forced unmount of the log does this the opposite way
around, but does not depend on the order for correct working. Fix the
inversion by changing the order locks are gained in
xfs_log_force_umount().

SGI-PV: 979661
SGI-Modid: xfs-linux-melb:xfs-kern:30773a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

To reduce contention on the log in large CPU count, separate out different
parts of the xlog_t structure onto different cachelines. Move each lock
onto a different cacheline along with all the members that are
accessed/modified while that lock is held.

Also, move the debugging code into debug code.

SGI-PV: 978729
SGI-Modid: xfs-linux-melb:xfs-kern:30772a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

The ticket allocator is just a simple slab implementation internal to the
log. It requires the icloglock to be held when manipulating it and this
contributes to contention on that lock.

Just kill the entire allocator and use a memory zone instead. While there,
allow us to gracefully fail allocation with ENOMEM.

SGI-PV: 978729
SGI-Modid: xfs-linux-melb:xfs-kern:30771a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Rather than use the icloglock for protecting the iclog completion callback
chain, use a new per-iclog lock so that walking the callback chain doesn't
require holding a global lock.

This reduces contention on the icloglock during transaction commit and log
I/O completion by reducing the number of times we need to hold the global
icloglock during these operations.

SGI-PV: 978729
SGI-Modid: xfs-linux-melb:xfs-kern:30770a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

While investigating the extent corruption bug I ran into this bug in debug
only code. xfs_bmap_check_leaf_extents() loops through the leaf blocks of
the extent btree checking that every extent is entirely before the next
extent. It also compares the last extent in the previous block to the
first extent in the current block when the previous block has been
released and potentially unmapped. So take a copy of the last extent
instead of a pointer. Also move the last extent check out of the loop
because we only need to do it once.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30718a
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>

Most VN_RELE calls either directly contain a XFS_ITOV or have the
corresponding xfs_inode already in scope. Use the IRELE helper instead of
VN_RELE to clarify the code. With a little more work we can kill VN_RELE
altogether and define IRELE in terms of iput directly.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30710a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

The three subcases of xfs_ioc_xattr don't share any semantics and almost
no code, so split it into three separate helpers.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30709a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

- rename rootvp to root for clarify
- remove useless vn_to_inode call
- check is_bad_inode before calling d_alloc_root
- use iput instead of VN_RELE in the error case

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30708a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

When writing into preallocated regions there is a case where XFS can oops
or hang doing the unwritten extent conversion on I/O completion. It turns
out that the problem is related to the btree cursor being invalid.

When we do an insert into the tree, we may need to split blocks in the
tree. When we only split at the leaf level (i.e. level 0), everything
works just fine. However, if we have a multi-level split in the btreee,
the cursor passed to the insert function is no longer valid once the
insert is complete.

The leaf level split is handled correctly because all the operations at
level 0 are done using the original cursor, hence it is updated correctly.
However, when we need to update the next level up the tree, we don't use
that cursor - we use a cloned cursor that points to the index in the next
level up where we need to do the insert.

Hence if we need to split a second level, the changes to the tree are
reflected in the cloned cursor and not the original cursor. This
clone-and-move-up-a-level-on-split behaviour recurses all the way to the
top of the tree.

The complexity here is that these cloned cursors do not point to the
original index that was inserted - they point to the newly allocated block
(the right block) and the original cursor pointer to that level may still
point to the left block. Hence, without deep examination of the cloned
cursor and buffers, we cannot update the original cursor with the new path
from the cloned cursor.

In these cases the original cursor could be pointing to the wrong block(s)
and hence a subsequent modification to the tree using that cursor will
lead to corruption of the tree.

The crash case occurs when the tree changes height - we insert a new level
in the tree, and the cursor does not have a buffer in it's path for that
level. Hence any attempt to walk back up the cursor to the root block will
result in a null pointer dereference.

To make matters even more complex, the BMAP BT is rooted in an inode, so
we can have a change of height in the btree *without a root split*. That
is, if the root block in the inode is full when we split a leaf node, we
cannot fit the pointer to the new block in the root, so we allocate a new
block, migrate all the ptrs out of the inode into the new block and point
the inode root block at the newly allocated block. This changes the height
of the tree without a root split having occurred and hence invalidates the
path in the original cursor.

The patch below prevents xfs_bmbt_insert() from returning with an invalid
cursor by detecting the cases that invalidate the original cursor and
refresh it by do a lookup into the btree for the original index we were
inserting at.

Note that the INOBT, AGFBNO and AGFCNT btree implementations also have
this bug, but the cursor is currently always destroyed or revalidated
after an insert for those trees. Hence this patch only address the problem
in the BMBT code.

SGI-PV: 979339
SGI-Modid: xfs-linux-melb:xfs-kern:30701a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

At ENOSPC, we can get a filesystem shutdown due to a cancelling a dirty
transaction in xfs_mkdir or xfs_create. This is due to the initial
allocation attempt not taking into account inode alignment and hence we
can prepare the AGF freelist for allocation when it's not actually
possible to do an allocation. This results in inode allocation returning
ENOSPC with a dirty transaction, and hence we shut down the filesystem.

Because the first allocation is an exact allocation attempt, we must tell
the allocator that the alignment does not affect the allocation attempt.
i.e. we will accept any extent alignment as long as the extent starts at
the block we want. Unfortunately, this means that if the longest free
extent is less than the length + alignment necessary for fallback
allocation attempts but is long enough to attempt a non-aligned
allocation, we will modify the free list.

If we then have the exact allocation fail, all other allocation attempts
will also fail due to the alignment constraint being taken into account.
Hence the initial attempt needs to set the "alignment slop" field so that
alignment, while not required, must be taken into account when determining
if there is enough space left in the AG to do the allocation.

That means if the exact allocation fails, we will not dirty the freelist
if there is not enough space available fo a subsequent allocation to
succeed. Hence we get an ENOSPC error back to userspace without shutting
down the filesystem.

SGI-PV: 978886
SGI-Modid: xfs-linux-melb:xfs-kern:30699a
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Replace the xfs_ail_entry_t with a struct list_head and clean the
surrounding code up. Also fixes a livelock in xfs_trans_first_push_ail()
by terminating the loop at the head of the list correctly.

SGI-PV: 978682
SGI-Modid: xfs-linux-melb:xfs-kern:30636a
Signed-off-by: NJosef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: NDavid Chinner <dgc@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

When xfs_mountfs is called by xfs_mount xfs_readsb was called 35 lines
above unconditionally, so there is no need to try to read the superblock
if it's not present. If any other port doesn't have the superblock read at
this point it should just call it directly from it's xfs_mount equivalent.

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30603a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NDonald Douwsma <donaldd@sgi.com>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

It's completely unused so we might aswell kill it. Note that there is
another t_sema in struct xlog_ticket, which is used and actually an sv_t
despite the name. That one is left untouched by this patch.

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30591a
Signed-off-by: NNiv Sardi <xaiki@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30553a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

SGI-PV: 976035
SGI-Modid: xfs-linux-melb:xfs-kern:30552a
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>