While implementing function tracer and function tracer graph support,
I found the exact arch implementation details to be a bit lacking
(and my x86 foo ain't great).  So after pounding out support for
the Blackfin arch, start documenting the requirements/details.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
LKML-Reference: <1252973415-21264-1-git-send-email-vapier@gentoo.org>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Parag noticed that the number of event tests has increased tremendously:

grep "Testing event" dmesg.31rc9 |wc -l
100

grep "Testing event" dmesg.31git |wc -l
1172

This is due to the testing of every syscall event when ftrace self
test is enabled. This adds a bit more time to kernel boot up and can
affect development by slowing down the time it takes between reboots.

This option makes the testing of the syscall events into a separate
config, to still be able to test most of ftrace internals at boot up
but not have to wait for all the syscall events to be tested.

The syscall event testing only tests the enabling and disabling of
the trace point, since the syscalls are not executed. What really needs
to be done is to somehow have a userspace tool test the syscall tracepoints
as well.
Reported-by: NParag Warudkar <parag.lkml@gmail.com>
LKML-Reference: <f7848160909130815l3e768a30n3b28808bbe5c254b@mail.gmail.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

- remove FTRACE_ENTRY_STRUCT_ONLY()
- remove TRACE_XXX() macros
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AADF6E6.3080606@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Make sure F_printk() has corrent format and args, and make sure
changes in F_STRUCT() won't break F_printk().
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AADF6CC.1060809@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

I found some typos in F_printk(), so I wrote compile-time check
for it, and triggered some compile errors and warnings.

I've fixed them on x86_32, but I have no x86_64 in my hand, so there
may still be some compile warnings on 64bits.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AADF60B.5070407@cn.fujitsu.com>

[ tested on x86_64, and works fine ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The generated functions of TRACE_EVENT uses "flags" in one of the
sub macros which shadows a parameter in the outside macro.

Simple fix is to make the submacro use __flags instead.

Discovered by sparse.
Reported-by: NJaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Some of the generated functions used in the TRACE_EVENT macros are
not declared static, but they are not global.

Discovered by sparse.
Reported-by: NJaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The cmpxchg used by PowerPC does the following:

  ({									 \
     __typeof__(*(ptr)) _o_ = (o);					 \
     __typeof__(*(ptr)) _n_ = (n);					 \
     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
				    (unsigned long)_n_, sizeof(*(ptr))); \
  })

This does a type check of *ptr to both o and n.

Unfortunately, the code in ring-buffer.c assigns longs to pointers
and pointers to longs and causes a warning on PowerPC:

ring_buffer.c: In function 'rb_head_page_set':
ring_buffer.c:704: warning: initialization makes pointer from integer without a cast
ring_buffer.c:704: warning: initialization makes pointer from integer without a cast
ring_buffer.c: In function 'rb_head_page_replace':
ring_buffer.c:797: warning: initialization makes integer from pointer without a cast

This patch adds the typecasts inside cmpxchg to annotate that a long is
being cast to a pointer and a pointer is being casted to a long and this
removes the PowerPC warnings.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Now that the pluging tracers use macros to create the structures and
automate the exporting of their formats to the format files, they also
automatically get a filter file.

This patch adds the code to implement the filter logic in the trace
recordings.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The macros in trace_entries.h have made the code in trace_event_types.h
obsolete. The file is no longer used, so this patch removes it.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch changes the way the format files in

  debugfs/tracing/events/ftrace/*/format

are created. It uses the new trace_entries.h file to automate the
creation of the format files to ensure that they are always in sync
with the actual structures. This is the same methodology used to
create the format files for the TRACE_EVENT macro.

This also updates the filter creation that was built on the creation
of the format files.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Some of the internal ftrace structures use structures within. The
output of a field saying it is just a structure is useless for a format
file. A binary reader of the ring buffer needs to know more about
how the fields are broken up.

This patch adds to the ftrace structure macros new fields to
describe the structures inside a structure.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The entries used by ftrace internal code (plugins) currently have their
formats manually exported to userspace. That is, the format files in
debugfs/tracing/events/ftrace/*/format are currently created by hand.
This is a maintenance nightmare, and can easily become out of sync
with what is actually shown.

This patch uses the methodology of the TRACE_EVENT macros to build
the structures so that their formats can be automated and this
will keep the structures in sync with what users can see.

This patch only changes the way the structures are created. Further
patches will build off of this to automate the format files.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch increases the max string used by predicates to
handle KSYM_SYMBOL_LEN.

Also moves an include to look nicer.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Documentation for event filters and formats.

v2 changes: fix a few problems noticed by Randy Dunlap.
Reviewed-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1252642431.8016.9.camel@tropicana>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If the correspoding module is unloaded before ftrace_profile_disable()
is called, event->profile_disable() won't be called, which can
cause oops:

  # insmod trace-events-sample.ko
  # perf record -f -a -e sample:foo_bar sleep 3 &
  # sleep 1
  # rmmod trace_events_sample
  # insmod trace-events-sample.ko
  OOPS!
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A9214E3.2070807@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Only 24 bytes needs to be reserved on the stack for the function graph
tracer on x86_64.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
LKML-Reference: <20090729085837.GB4998@jolsa.lab.eng.brq.redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

__start_mcount_loc[] is unused after init, yet occupies RAM forever
as part of .rodata.  152kiB is typical on a 64-bit architecture.  Instead,
__start_mcount_loc should be in the interval [__init_begin, __init_end)
so that the space is reclaimed after init.

__start_mcount_loc[] is generated during the load portion
of kernel build, and is used only by ftrace_init().  ftrace_init is declared
'__init' and is in .init.text, which is freed after init.
__start_mcount_loc is placed into .rodata by a call to MCOUNT_REC inside
the RO_DATA macro of include/asm-generic/vmlinux.lds.h.  The array *is*
read-only, but more importantly it is not used after init.  So the call to
MCOUNT_REC should be moved from RO_DATA to INIT_DATA.

This patch has been tested on x86_64 with CONFIG_DEBUG_PAGEALLOC=y
which verifies that the address range never is accessed after init.
Signed-off-by: NJohn Reiser <jreiser@BitWagon.com>
LKML-Reference: <4A6DF0B6.7080402@bitwagon.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The state of the function pair tracing_stop()/tracing_start() is
correctly considered when tracer data are updated. However, the global
and externally accessible variable tracing_max_latency is always updated
- even when tracing is stopped.

The update should only occur, if tracing was not stopped.
Signed-off-by: NCarsten Emde <C.Emde@osadl.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When the nsecs_to_usecs() conversion in probe_wakeup_sched_switch() and
check_critical_timing() was moved to a later stage in order to avoid
unnecessary computing, it was overlooked to remove the original
variables, assignments and comments..
Signed-off-by: NCarsten Emde <C.Emde@osadl.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Booting 2.6.31 and executing
   echo 1 >/sys/kernel/debug/tracing/events/enable
leads to
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<c032a583>] ftrace_raw_event_block_bio_bounce+0x4b/0xb9

Apparently,
   bio = bio_map_user(q, NULL, uaddr, len, reading, gfp_mask);
is called in block/blk-map.c:58 where bio->bi_bdev in set to NULL and
still is NULL when an attempt is made to evaluate bio->bi_bdev->bd_dev
in include/trace/events/block.h:189.

The tracepoint should ensure bio->bi_bdev is not dereferenced, if NULL.
Signed-off-by: NCarsten Emde <C.Emde@osadl.org>
LKML-Reference: <4AAAC9B1.9060505@osadl.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Convert the writing to 'set_graph_function', 'set_ftrace_filter'
and 'set_ftrace_notrace' to use the generic trace_parser
'trace_get_user' function.

Removed FTRACE_ITER_CONT flag, since it's not needed after this change.

Minor fix in set_graph_function display - g_show function.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
LKML-Reference: <1252682969-3366-4-git-send-email-jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Convert the parsing of the file 'set_event' to use the generic
trace_praser 'trace_get_user' function.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
LKML-Reference: <1252682969-3366-3-git-send-email-jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Create a "trace_parser" that can parse the user space input for
separate words.

struct trace_parser is the descriptor.

Generic "trace_get_user" function that can be a helper to read multiple
words passed in by user space.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
LKML-Reference: <1252682969-3366-2-git-send-email-jolsa@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Both trace_output.c and trace_function_graph.c do basically the same
thing to handle the printing of the latency-format. This patch moves
the code into one function that both can use.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch adds the lock depth of the big kernel lock to the generic
entry header. This way we can see the depth of the lock and help
in removing the BKL.

Example:

 #                  _------=> CPU#
 #                 / _-----=> irqs-off
 #                | / _----=> need-resched
 #                || / _---=> hardirq/softirq
 #                ||| / _--=> preempt-depth
 #                |||| /_--=> lock-depth
 #                |||||/     delay
 #  cmd     pid   |||||| time  |   caller
 #     \   /      ||||||   \   |   /
   <idle>-0       2.N..3 5902255250us+: lock_acquire: read rcu_read_lock
   <idle>-0       2.N..3 5902255253us+: lock_release: rcu_read_lock
   <idle>-0       2dN..3 5902255257us+: lock_acquire: xtime_lock
   <idle>-0       2dN..4 5902255259us : lock_acquire: clocksource_lock
   <idle>-0       2dN..4 5902255261us+: lock_release: clocksource_lock
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The userstack trace required the recording of the tgid entry.
Unfortunately, it was added to the generic entry where it wasted
4 bytes of every entry and was only used by one entry.

This patch moves it out of the generic field and moves it into the
only user (userstack_entry).
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

While debugging something with the function_graph tracer, I found the
need to see the preempt count of the traces. Unfortunately, since
the function graph tracer has its own output formatting, it does not
honor the latency-format option.

This patch makes the function_graph tracer honor the latency-format
option, but still keeps control of the output. But now we have the
same details that the latency-format supplies.

 # tracer: function_graph
 #
 #      _-----=> irqs-off
 #     / _----=> need-resched
 #    | / _---=> hardirq/softirq
 #    || / _--=> preempt-depth
 #    ||| /
 #    ||||
 # CPU||||  DURATION                  FUNCTION CALLS
 # |  ||||   |   |                     |   |   |   |
  3)  d..1  1.333 us    |        idle_cpu();
  3)  d.h1              |        tick_check_idle() {
  3)  d.h1  0.550 us    |          tick_check_oneshot_broadcast();
  3)  d.h1              |          tick_nohz_stop_idle() {
  3)  d.h1              |            ktime_get() {
  3)  d.h1              |              ktime_get_ts() {
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The dynamic function tracer relys on the macro P6_NOP5 always being
an atomic NOP. If for some reason it is changed to be two operations
(like a nop2 nop3) it can faults within the kernel when the function
tracer modifies the code.

This patch adds a comment to note that the P6_NOPs are expected to
be atomic. This will hopefully prevent anyone from changing that.
Reported-by: NMathieu Desnoyer <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Move DEFINE_COMPARISON_PRED() and DEFINE_EQUALITY_PRED()
  to kernel/trace/trace_events_filter.c
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AA8579B.4020706@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Remove unused field @stats from struct tracer.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AA8579B.4020706@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Fix white-space formatting.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AA8579B.4020706@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Removes unreachable code.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4AA8579B.4020706@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The wakeup tracer, when enabled, has its own function tracer.
It only traces the functions on the CPU where the task it is following
is on. If a task is woken on one CPU but then migrates to another CPU
before it wakes up, the latency tracer will then start tracing functions
on the other CPU.

To find which CPU the task is on, the wakeup function tracer performs
a task_cpu(wakeup_task). But to make sure the task does not disappear
it grabs the wakeup_lock, which is also taken when the task wakes up.
By taking this lock, the function tracer does not need to worry about
the task being freed as it checks its cpu.

Jan Blunck found a problem with this approach on his 32 CPU box. When
a task is being traced by the wakeup tracer, all functions take this
lock. That means that on all 32 CPUs, each function call is taking
this one lock to see if the task is on that CPU. This lock has just
serialized all functions on all 32 CPUs. Needless to say, this caused
major issues on that box. It would even lockup.

This patch changes the wakeup latency to insert a probe on the migrate task
tracepoint. When a task changes its CPU that it will run on, the
probe will take note. Now the wakeup function tracer no longer needs
to take the lock. It only compares the current CPU with a variable that
holds the current CPU the task is on. We don't worry about races since
it is OK to add or miss a function trace.
Reported-by: NJan Blunck <jblunck@suse.de>
Tested-by: NJan Blunck <jblunck@suse.de>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

rb_buffer_peek() operates with struct ring_buffer_per_cpu *cpu_buffer
only. Thus, instead of passing variables buffer and cpu it is better
to use cpu_buffer directly. This also reduces the risk of races since
cpu_buffer is not calculated twice.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
LKML-Reference: <1249045084-3028-1-git-send-email-robert.richter@amd.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Merge branch 'tracing/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into tracing/core

Merge reason: move from -rc5 to -rc9.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: fix freeing of unallocated memory
  firewire: ohci: fix Ricoh R5C832, video reception
  firewire: ohci: fix Agere FW643 and multiple cameras
  firewire: core: fix crash in iso resource management

This patch fixes a null pointer exception caused by removal of
'ack()' for level interrupts in the Xilinx interrupt driver.  A recent
change to the xilinx interrupt controller removed the ack hook for
level irqs.
Signed-off-by: NRoderick Colenbrander <thunderbird2k@gmail.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>