They aren't used anywhere anymore now that the debugging macros are
gone, so remove it from hyperv.h as well.

Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

As there is no user of this variable, it's time to delete it.  For
dynamic debugging of the hyperv code, use the standard dynamic debug
kernel interface.

Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This also removed the unused function hv_dump_ring_info().

Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Used the correct dev_warn() call instead.

Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

These aren't used by anyone anymore, so remove them before someone tries
to use them again.

Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It's a global symbol, so properly prefix it and use the proper EXPORT
value as well.

Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

No one outside of the hyperv core needs to include the asm/hyperv.h
file, so don't put it in the "global" include/linux/hyperv.h file.

Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

After many years wandering the desert, it is finally time for the
Microsoft HyperV code to move out of the staging directory.  Or at least
the core hyperv bus code, and the utility driver, the rest still have
some review to get through by the various subsystem maintainers.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>

The nfsservctl system call is now gone, so we should remove all
linkage for it.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need a callback to do some things after pwm_enable, pwm_disable
and pwm_config.
Signed-off-by: NDilan Lee <dilee@nvidia.com>
Reviewed-by: NRobert Morell <rmorell@nvidia.com>
Reviewed-by: NArun Murthy <arun.murthy@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace/remove use of RIO v.1.2 registers/bits that are not
forward-compatible with newer versions of RapidIO specification.

RapidIO specification v.1.3 removed Write Port CSR, Doorbell CSR,
Mailbox CSR and Mailbox and Doorbell bits of the PEF CAR.

Use of removed (since RIO v.1.3) register bits affects users of
currently available 1.3 and 2.x compliant devices who may use not so
recent kernel versions.

Removing checks for unsupported bits makes corresponding routines
compatible with all versions of RapidIO specification.  Therefore,
backporting makes stable kernel versions compliant with RIO v.1.3 and
later as well.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Chul Kim <chul.kim@idt.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Purely in-memory filesystems do not use the inode hash as the dcache
tells us if an entry already exists.  As a result, they do not call
unlock_new_inode, and thus directory inodes do not get put into a
different lockdep class for i_sem.

We need the different lockdep classes, because the locking order for
i_mutex is different for directory inodes and regular inodes.  Directory
inodes can do "readdir()", which takes i_mutex *before* possibly taking
mm->mmap_sem (due to a page fault while copying the directory entry to
user space).

In contrast, regular inodes can be mmap'ed, which takes mm->mmap_sem
before accessing i_mutex.

The two cases can never happen for the same inode, so no real deadlock
can occur, but without the different lockdep classes, lockdep cannot
understand that.  As a result, if CONFIG_DEBUG_LOCK_ALLOC is set, this
can lead to false positives from lockdep like below:

    find/645 is trying to acquire lock:
     (&mm->mmap_sem){++++++}, at: [<ffffffff81109514>] might_fault+0x5c/0xac

    but task is already holding lock:
     (&sb->s_type->i_mutex_key#15){+.+.+.}, at: [<ffffffff81149f34>]
    vfs_readdir+0x5b/0xb4

    which lock already depends on the new lock.

    the existing dependency chain (in reverse order) is:

    -> #1 (&sb->s_type->i_mutex_key#15){+.+.+.}:
          [<ffffffff8108ac26>] lock_acquire+0xbf/0x103
          [<ffffffff814db822>] __mutex_lock_common+0x4c/0x361
          [<ffffffff814dbc46>] mutex_lock_nested+0x40/0x45
          [<ffffffff811daa87>] hugetlbfs_file_mmap+0x82/0x110
          [<ffffffff81111557>] mmap_region+0x258/0x432
          [<ffffffff811119dd>] do_mmap_pgoff+0x2ac/0x306
          [<ffffffff81111b4f>] sys_mmap_pgoff+0x118/0x16a
          [<ffffffff8100c858>] sys_mmap+0x22/0x24
          [<ffffffff814e3ec2>] system_call_fastpath+0x16/0x1b

    -> #0 (&mm->mmap_sem){++++++}:
          [<ffffffff8108a4bc>] __lock_acquire+0xa1a/0xcf7
          [<ffffffff8108ac26>] lock_acquire+0xbf/0x103
          [<ffffffff81109541>] might_fault+0x89/0xac
          [<ffffffff81149cff>] filldir+0x6f/0xc7
          [<ffffffff811586ea>] dcache_readdir+0x67/0x205
          [<ffffffff81149f54>] vfs_readdir+0x7b/0xb4
          [<ffffffff8114a073>] sys_getdents+0x7e/0xd1
          [<ffffffff814e3ec2>] system_call_fastpath+0x16/0x1b

This patch moves the directory vs file lockdep annotation into a helper
function that can be called by in-memory filesystems and has hugetlbfs
call it.
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is going to be needed by some drivers that handle more than one
device, like all other bus types do, so prepare for that in advance
before the user/kernel api is used.

Cc:  K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In preparation for implementing vmbus aliases for auto-loading
Hyper-V drivers, define vmbus specific device ID.
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I ran into a couple of programs which broke with the new Linux 3.0
version.  Some of those were binary only.  I tried to use LD_PRELOAD to
work around it, but it was quite difficult and in one case impossible
because of a mix of 32bit and 64bit executables.

For example, all kind of management software from HP doesnt work, unless
we pretend to run a 2.6 kernel.

  $ uname -a
  Linux svivoipvnx001 3.0.0-08107-g97cd98f #1062 SMP Fri Aug 12 18:11:45 CEST 2011 i686 i686 i386 GNU/Linux

  $ hpacucli ctrl all show

  Error: No controllers detected.

  $ rpm -qf /usr/sbin/hpacucli
  hpacucli-8.75-12.0

Another notable case is that Python now reports "linux3" from
sys.platform(); which in turn can break things that were checking
sys.platform() == "linux2":

  https://bugzilla.mozilla.org/show_bug.cgi?id=664564

It seems pretty clear to me though it's a bug in the apps that are using
'==' instead of .startswith(), but this allows us to unbreak broken
programs.

This patch adds a UNAME26 personality that makes the kernel report a
2.6.40+x version number instead.  The x is the x in 3.x.

I know this is somewhat ugly, but I didn't find a better workaround, and
compatibility to existing programs is important.

Some programs also read /proc/sys/kernel/osrelease.  This can be worked
around in user space with mount --bind (and a mount namespace)

To use:

  wget ftp://ftp.kernel.org/pub/linux/kernel/people/ak/uname26/uname26.c
  gcc -o uname26 uname26.c
  ./uname26 program
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

tty_operations->remove is normally called like:
queue_release_one_tty
 ->tty_shutdown
   ->tty_driver_remove_tty
     ->tty_operations->remove

However tty_shutdown() is called from queue_release_one_tty() only if
tty_operations->shutdown is NULL. But for pty, it is not.
pty_unix98_shutdown() is used there as ->shutdown.

So tty_operations->remove of pty (i.e. pty_unix98_remove()) is never
called. This results in invalid pty_count. I.e. what can be seen in
/proc/sys/kernel/pty/nr.

I see this was already reported at:
  https://lkml.org/lkml/2009/11/5/370
But it was not fixed since then.

This patch is kind of a hackish way. The problem lies in ->install. We
allocate there another tty (so-called tty->link). So ->install is
called once, but ->remove twice, for both tty and tty->link. The fix
here is to count both tty and tty->link and divide the count by 2 for
user.

And to have ->remove called, let's make tty_driver_remove_tty() global
and call that from pty_unix98_shutdown() (tty_operations->shutdown).

While at it, let's document that when ->shutdown is defined,
tty_shutdown() is not called.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Certain platform specific or Host-WiLink Interface specific actions would be
required to be taken when the chip is being enabled and after the chip is
disabled such as configuration of the mux modes for the GPIO of host connected
to the nshutdown of the chip or relinquishing UART after the chip is disabled.

Similar actions can also be taken when the chip is in deep sleep or when the
chip is awake. Performance enhancements such as configuring the host to run
faster when chip is awake and slower when chip is asleep can also be made
here.
Signed-off-by: NPavan Savoy <pavan_savoy@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Revert the pass-good area introduced in ffd1f609 ("writeback:
introduce max-pause and pass-good dirty limits") and make the max-pause
area smaller and safe.

This fixes ~30% performance regression in the ext3 data=writeback
fio_mmap_randwrite_64k/fio_mmap_randrw_64k test cases, where there are
12 JBOD disks, on each disk runs 8 concurrent tasks doing reads+writes.

Using deadline scheduler also has a regression, but not that big as CFQ,
so this suggests we have some write starvation.

The test logs show that

- the disks are sometimes under utilized

- global dirty pages sometimes rush high to the pass-good area for
  several hundred seconds, while in the mean time some bdi dirty pages
  drop to very low value (bdi_dirty << bdi_thresh).  Then suddenly the
  global dirty pages dropped under global dirty threshold and bdi_dirty
  rush very high (for example, 2 times higher than bdi_thresh). During
  which time balance_dirty_pages() is not called at all.

So the problems are

1) The random writes progress so slow that they break the assumption of
   the max-pause logic that "8 pages per 200ms is typically more than
   enough to curb heavy dirtiers".

2) The max-pause logic ignored task_bdi_thresh and thus opens the possibility
   for some bdi's to over dirty pages, leading to (bdi_dirty >> bdi_thresh)
   and then (bdi_thresh >> bdi_dirty) for others.

3) The higher max-pause/pass-good thresholds somehow leads to the bad
   swing of dirty pages.

The fix is to allow the task to slightly dirty over task_bdi_thresh, but
no way to exceed bdi_dirty and/or global dirty_thresh.

Tests show that it fixed the JBOD regression completely (both behavior
and performance), while still being able to cut down large pause times
in balance_dirty_pages() for single-disk cases.
Reported-by: NLi Shaohua <shaohua.li@intel.com>
Tested-by: NLi Shaohua <shaohua.li@intel.com>
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>

This allows the cast in lowmem_page_address (introduced as a warning
fixup to 33dd4e0e "mm: make some struct page's const") to be
removed.

Propagate const'ness to page_to_section() as well since it is required
by __page_to_pfn.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Acked-by: NRik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Followup to 33dd4e0e "mm: make some struct page's const" which missed the
HASHED_PAGE_VIRTUAL case.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit ae1b1539, block: reimplement
FLUSH/FUA to support merge, introduced a performance regression when
running any sort of fsyncing workload using dm-multipath and certain
storage (in our case, an HP EVA).  The test I ran was fs_mark, and it
dropped from ~800 files/sec on ext4 to ~100 files/sec.  It turns out
that dm-multipath always advertised flush+fua support, and passed
commands on down the stack, where those flags used to get stripped off.
The above commit changed that behavior:

static inline struct request *__elv_next_request(struct request_queue *q)
{
        struct request *rq;

        while (1) {
-               while (!list_empty(&q->queue_head)) {
+               if (!list_empty(&q->queue_head)) {
                        rq = list_entry_rq(q->queue_head.next);
-                       if (!(rq->cmd_flags & (REQ_FLUSH | REQ_FUA)) ||
-                           (rq->cmd_flags & REQ_FLUSH_SEQ))
-                               return rq;
-                       rq = blk_do_flush(q, rq);
-                       if (rq)
-                               return rq;
+                       return rq;
                }

Note that previously, a command would come in here, have
REQ_FLUSH|REQ_FUA set, and then get handed off to blk_do_flush:

struct request *blk_do_flush(struct request_queue *q, struct request *rq)
{
        unsigned int fflags = q->flush_flags; /* may change, cache it */
        bool has_flush = fflags & REQ_FLUSH, has_fua = fflags & REQ_FUA;
        bool do_preflush = has_flush && (rq->cmd_flags & REQ_FLUSH);
        bool do_postflush = has_flush && !has_fua && (rq->cmd_flags &
        REQ_FUA);
        unsigned skip = 0;
...
        if (blk_rq_sectors(rq) && !do_preflush && !do_postflush) {
                rq->cmd_flags &= ~REQ_FLUSH;
		if (!has_fua)
			rq->cmd_flags &= ~REQ_FUA;
	        return rq;
	}

So, the flush machinery was bypassed in such cases (q->flush_flags == 0
&& rq->cmd_flags & (REQ_FLUSH|REQ_FUA)).

Now, however, we don't get into the flush machinery at all.  Instead,
__elv_next_request just hands a request with flush and fua bits set to
the scsi_request_fn, even if the underlying request_queue does not
support flush or fua.

The agreed upon approach is to fix the flush machinery to allow
stacking.  While this isn't used in practice (since there is only one
request-based dm target, and that target will now reflect the flush
flags of the underlying device), it does future-proof the solution, and
make it function as designed.

In order to make this work, I had to add a field to the struct request,
inside the flush structure (to store the original req->end_io).  Shaohua
had suggested overloading the union with rb_node and completion_data,
but the completion data is used by device mapper and can also be used by
other drivers.  So, I didn't see a way around the additional field.

I tested this patch on an HP EVA with both ext4 and xfs, and it recovers
the lost performance.  Comments and other testers, as always, are
appreciated.

Cheers,
Jeff
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Function genpd_queue_power_off_work() is not defined for
CONFIG_PM_RUNTIME, so pm_genpd_poweroff_unused() causes a build
error to happen in that case.  Fix the problem by making
pm_genpd_poweroff_unused() depend on CONFIG_PM_RUNTIME too.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

"mmc: dw_mmc: Fix DDR mode support" removed the last user.
Signed-off-by: NJaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NChris Ball <cjb@laptop.org>

The patch http://lkml.org/lkml/2003/7/13/226 introduced an RLIMIT_NPROC
check in set_user() to check for NPROC exceeding via setuid() and
similar functions.

Before the check there was a possibility to greatly exceed the allowed
number of processes by an unprivileged user if the program relied on
rlimit only.  But the check created new security threat: many poorly
written programs simply don't check setuid() return code and believe it
cannot fail if executed with root privileges.  So, the check is removed
in this patch because of too often privilege escalations related to
buggy programs.

The NPROC can still be enforced in the common code flow of daemons
spawning user processes.  Most of daemons do fork()+setuid()+execve().
The check introduced in execve() (1) enforces the same limit as in
setuid() and (2) doesn't create similar security issues.

Neil Brown suggested to track what specific process has exceeded the
limit by setting PF_NPROC_EXCEEDED process flag.  With the change only
this process would fail on execve(), and other processes' execve()
behaviour is not changed.

Solar Designer suggested to re-check whether NPROC limit is still
exceeded at the moment of execve().  If the process was sleeping for
days between set*uid() and execve(), and the NPROC counter step down
under the limit, the defered execve() failure because NPROC limit was
exceeded days ago would be unexpected.  If the limit is not exceeded
anymore, we clear the flag on successful calls to execve() and fork().

The flag is also cleared on successful calls to set_user() as the limit
was exceeded for the previous user, not the current one.

Similar check was introduced in -ow patches (without the process flag).

v3 - clear PF_NPROC_EXCEEDED on successful calls to set_user().
Reviewed-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Acked-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add FLUSH/FUA support to blktrace. As FLUSH precedes WRITE and/or
FUA follows WRITE, use the same 'F' flag for both cases and
distinguish them by their (relative) position. The end results
look like (other flags might be shown also):

 - WRITE:            W
 - WRITE_FLUSH:      FW
 - WRITE_FUA:        WF
 - WRITE_FLUSH_FUA:  FWF

Note that we reuse TC_BARRIER due to lack of bit space of act_mask
so that the older versions of blktrace tools will report flush
requests as barriers from now on.

Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

REQ_SECURE, REQ_FLUSH and REQ_FUA may all be set on a bio as well as
on a request, so relocate them to the shared part of the enum.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

The patch adds empty function of_get_property for non-dt build, so that
drivers migrating to dt can save some '#ifdef CONFIG_OF'.

This also fixes the current Tegra compile problem in linux-next.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

In commit 2efaca92 ("mm/futex: fix futex writes on archs with SW
tracking of dirty & young") we forgot about MMU=n.  This patch fixes
that.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NDavid Howells <dhowells@redhat.com>
Link: http://lkml.kernel.org/r/1311761831.24752.413.camel@twinsSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Avoid annoying warnings from these functions ("discards qualifiers")
because they assign 'current_cred()' to a non-const pointer.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 32955148 ("fix rcu annotations noise in cred.h") accidentally
dropped the const of current->cred inside current_cred() by the
insertion of a cast to deal with an RCU annotation loss warning from
sparce.

Use an appropriate RCU wrapper instead so as not to lose the const.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Reviewed-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit a9ff4f87 "fuse: support BSD locking semantics" overlooked a
number of issues with supporing flock locks over existing POSIX
locking infrastructure:

  - it's not backward compatible, passing flock(2) calls to userspace
    unconditionally (if userspace sets FUSE_POSIX_LOCKS)

  - it doesn't cater for the fact that flock locks are automatically
    unlocked on file release

  - it doesn't take into account the fact that flock exclusive locks
    (write locks) don't need an fd opened for write.

The last one invalidates the original premise of the patch that flock
locks can be emulated with POSIX locks.

This patch fixes the first two issues.  The last one needs to be fixed
in userspace if the filesystem assumed that a write lock will happen
only on a file operned for write (as in the case of the current fuse
library).
Reported-by: NSebastian Pipping <webmaster@hartwork.org>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Currently userland will barf when including linux/netlink.h unless it
precisely includes sys/socket.h first.  The issue is where the
definition of "sa_family_t" comes from.

We've been back and forth on how to fix this issue in the past, see:

http://thread.gmane.org/gmane.linux.debian.devel.bugs.general/622621
http://thread.gmane.org/gmane.linux.network/143380

Ben Hutchings suggested we take a hint from how we handle the
sockaddr_storage type.  First we define a "__kernel_sa_family_t"
to linux/socket.h that is always defined.

Then if __KERNEL__ is defined, we also define "sa_family_t" as
equal to "__kernel_sa_family_t".

Then in places like linux/netlink.h we use __kernel_sa_family_t
in user visible datastructures.
Reported-by: NMichel Machado <michel@digirati.com.br>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

task->cred is declared as __rcu, and access to other tasks' ->cred is,
indeed, protected.  Access to current->cred does not need rcu_dereference()
at all, since only the task itself can change its ->cred.  sparse, of
course, has no way of knowing that...

Add force-cast in current_cred(), make current_fsuid() et.al. use it.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The inode structure layout is largely random, and some of the vfs paths
really do care.  The path lookup in particular is already quite D$
intensive, and profiles show that accessing the 'inode->i_op->xyz'
fields is quite costly.

We already optimized the dcache to not unnecessarily load the d_op
structure for members that are often NULL using the DCACHE_OP_xyz bits
in dentry->d_flags, and this does something very similar for the inode
ops that are used during pathname lookup.

It also re-orders the fields so that the fields accessed by 'stat' are
together at the beginning of the inode structure, and roughly in the
order accessed.

The effect of this seems to be in the 1-2% range for an empty kernel
"make -j" run (which is fairly kernel-intensive, mostly in filename
lookup), so it's visible.  The numbers are fairly noisy, though, and
likely depend a lot on exact microarchitecture.  So there's more tuning
to be done.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Gcc tends to generate better code with small integers, including the
DCACHE_xyz flag tests - so move the common ones to be first in the list.
Also just remove the unused DCACHE_INOTIFY_PARENT_WATCHED and
DCACHE_AUTOFS_PENDING values, their users no longer exists in the source
tree.

And add a "unlikely()" to the DCACHE_OP_COMPARE test, since we want the
common case to be a nice straight-line fall-through.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Computers have become a lot faster since we compromised on the
partial MD4 hash which we use currently for performance reasons.

MD5 is a much safer choice, and is inline with both RFC1948 and
other ISS generators (OpenBSD, Solaris, etc.)

Furthermore, only having 24-bits of the sequence number be truly
unpredictable is a very serious limitation.  So the periodic
regeneration and 8-bit counter have been removed.  We compute and
use a full 32-bit sequence number.

For ipv6, DCCP was found to use a 32-bit truncated initial sequence
number (it needs 43-bits) and that is fixed here as well.
Reported-by: NDan Kaminsky <dan@doxpara.com>
Tested-by: NWilly Tarreau <w@1wt.eu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We are going to use this for TCP/IP sequence number and fragment ID
generation.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For ChromiumOS, we use SHA-1 to verify the integrity of the root
filesystem.  The speed of the kernel sha-1 implementation has a major
impact on our boot performance.

To improve boot performance, we investigated using the heavily optimized
sha-1 implementation used in git.  With the git sha-1 implementation, we
see a 11.7% improvement in boot time.

10 reboots, remove slowest/fastest.

Before:

  Mean: 6.58 seconds Stdev: 0.14

After (with git sha-1, this patch):

  Mean: 5.89 seconds Stdev: 0.07

The other cool thing about the git SHA-1 implementation is that it only
needs 64 bytes of stack for the workspace while the original kernel
implementation needed 320 bytes.
Signed-off-by: NMandeep Singh Baines <msb@chromium.org>
Cc: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Cc: Nicolas Pitre <nico@cam.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I suspect that this works on T410.
Signed-off-by: NAndy Lutomirski <luto@mit.edu>
Signed-off-by: NMatthew Garrett <mjg@redhat.com>