Add the routine to setup interrupt remapping for ioapic
interrupts. Also add a routine to change the affinity of an
irq and to free an irq allocation for interrupt remapping.
The last two functions will also be used for MSI interrupts.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Add routines to:

* Alloc remapping tables and single entries from these
  tables
* Change entries in the tables
* Free entries in the table
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Add routine to invalidate the IOMMU cache for interupt
translations. Also include the IRTE caches when flushing all
IOMMU caches.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The irq remapping tables for the AMD IOMMU need to be
aligned on a 128 byte boundary. Create a seperate slab-cache
to guarantee this alignment.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The IVRS ACPI table provides information about the IOAPICs
and the HPETs available in the system and which PCI device
ID they use in transactions. Save that information for later
usage in interrupt remapping.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

SR-IOV can create buses without a bridge.  There may be other cases
where this happens as well.  In these cases skip to the parent bus
and continue testing devices there.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This did not work because devices are not put into the
pt_domain. Fix this.

Cc: stable@vger.kernel.org
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The message belongs there anyway, so move it to that
function.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Split out the code to parse the ACPI table and setup
relevant data structures into a new function.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

A few sparse warnings fire in drivers/iommu/amd_iommu_init.c.
Fix most of them with this patch. Also fix the sparse
warnings in drivers/iommu/irq_remapping.c while at it.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Implement the attribute itself and add the code for the
AMD IOMMU driver.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

write_file_bool() modifies 32 bits of data, so "amd_iommu_unmap_flush"
needs to be 32 bits as well or we'll corrupt memory.  Fortunately it
looks like the data is aligned with a gap after the declaration so this
is harmless in production.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Work around broken devices and adhere to ACS support when determining
IOMMU grouping.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Add IOMMU group support to AMD-Vi device init and uninit code.
Existing notifiers make sure this gets called for each device.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

IOMMU device groups are currently a rather vague associative notion
with assembly required by the user or user level driver provider to
do anything useful.  This patch intends to grow the IOMMU group concept
into something a bit more consumable.

To do this, we first create an object representing the group, struct
iommu_group.  This structure is allocated (iommu_group_alloc) and
filled (iommu_group_add_device) by the iommu driver.  The iommu driver
is free to add devices to the group using it's own set of policies.
This allows inclusion of devices based on physical hardware or topology
limitations of the platform, as well as soft requirements, such as
multi-function trust levels or peer-to-peer protection of the
interconnects.  Each device may only belong to a single iommu group,
which is linked from struct device.iommu_group.  IOMMU groups are
maintained using kobject reference counting, allowing for automatic
removal of empty, unreferenced groups.  It is the responsibility of
the iommu driver to remove devices from the group
(iommu_group_remove_device).

IOMMU groups also include a userspace representation in sysfs under
/sys/kernel/iommu_groups.  When allocated, each group is given a
dynamically assign ID (int).  The ID is managed by the core IOMMU group
code to support multiple heterogeneous iommu drivers, which could
potentially collide in group naming/numbering.  This also keeps group
IDs to small, easily managed values.  A directory is created under
/sys/kernel/iommu_groups for each group.  A further subdirectory named
"devices" contains links to each device within the group.  The iommu_group
file in the device's sysfs directory, which formerly contained a group
number when read, is now a link to the iommu group.  Example:

$ ls -l /sys/kernel/iommu_groups/26/devices/
total 0
lrwxrwxrwx. 1 root root 0 Apr 17 12:57 0000:00:1e.0 ->
		../../../../devices/pci0000:00/0000:00:1e.0
lrwxrwxrwx. 1 root root 0 Apr 17 12:57 0000:06:0d.0 ->
		../../../../devices/pci0000:00/0000:00:1e.0/0000:06:0d.0
lrwxrwxrwx. 1 root root 0 Apr 17 12:57 0000:06:0d.1 ->
		../../../../devices/pci0000:00/0000:00:1e.0/0000:06:0d.1

$ ls -l  /sys/kernel/iommu_groups/26/devices/*/iommu_group
[truncating perms/owner/timestamp]
/sys/kernel/iommu_groups/26/devices/0000:00:1e.0/iommu_group ->
					../../../kernel/iommu_groups/26
/sys/kernel/iommu_groups/26/devices/0000:06:0d.0/iommu_group ->
					../../../../kernel/iommu_groups/26
/sys/kernel/iommu_groups/26/devices/0000:06:0d.1/iommu_group ->
					../../../../kernel/iommu_groups/26

Groups also include several exported functions for use by user level
driver providers, for example VFIO.  These include:

iommu_group_get(): Acquires a reference to a group from a device
iommu_group_put(): Releases reference
iommu_group_for_each_dev(): Iterates over group devices using callback
iommu_group_[un]register_notifier(): Allows notification of device add
        and remove operations relevant to the group
iommu_group_id(): Return the group number

This patch also extends the IOMMU API to allow attaching groups to
domains.  This is currently a simple wrapper for iterating through
devices within a group, but it's expected that the IOMMU API may
eventually make groups a more integral part of domains.

Groups intentionally do not try to manage group ownership.  A user
level driver provider must independently acquire ownership for each
device within a group before making use of the group as a whole.
This may change in the future if group usage becomes more pervasive
across both DMA and IOMMU ops.

Groups intentionally do not provide a mechanism for driver locking
or otherwise manipulating driver matching/probing of devices within
the group.  Such interfaces are generic to devices and beyond the
scope of IOMMU groups.  If implemented, user level providers have
ready access via iommu_group_for_each_dev and group notifiers.

iommu_device_group() is removed here as it has no users.  The
replacement is:

	group = iommu_group_get(dev);
	id = iommu_group_id(group);
	iommu_group_put(group);

AMD-Vi & Intel VT-d support re-added in following patches.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

When a device is added to the system at runtime the AMD
IOMMU driver initializes the necessary data structures to
handle translation for it. But it forgets to change the
per-device dma_ops to point to the AMD IOMMU driver. So
mapping actually never happens and all DMA accesses end in
an IO_PAGE_FAULT. Fix this.
Reported-by: NStefan Assmann <sassmann@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

In the error path of the ppr_notifer it can happen that the
iommu->lock is taken recursivly. This patch fixes the
problem by releasing the iommu->lock before any notifier is
invoked. This also requires to move the erratum workaround
for the ppr-log (interrupt may be faster than data in the log)
one function up.

Cc: stable@vger.kernel.org # v3.3, v3.4
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Due to a recent erratum it can happen that the head pointer
of the event-log is updated before the actual event-log
entry is written. This patch implements the recommended
workaround.

Cc: stable@vger.kernel.org	# all stable kernels
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Unfortunatly the PRI spec changed and moved the
TLP-prefix-required bit to a different location. This patch
makes the necessary change in the AMD IOMMU driver.
Regressions are not expected because all hardware
implementing the PRI capability sets this bit to zero
anyway.

Cc: stable@vger.kernel.org # v3.3
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Adapt core x86 and IA64 architecture code for dma_map_ops changes: replace
alloc/free_coherent with generic alloc/free methods.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
[removed swiotlb related changes and replaced it with wrappers,
 merged with IA64 patch to avoid inter-patch dependences in intel-iommu code]
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NTony Luck <tony.luck@intel.com>

Fix the following section warnings :

WARNING: vmlinux.o(.text+0x49dbc): Section mismatch in reference
from the function acpi_map_cpu2node() to the variable
.cpuinit.data:__apicid_to_node The function acpi_map_cpu2node()
references the variable __cpuinitdata __apicid_to_node. This is
often because acpi_map_cpu2node lacks a __cpuinitdata
annotation or the annotation of __apicid_to_node is wrong.

WARNING: vmlinux.o(.text+0x49dc1): Section mismatch in reference
from the function acpi_map_cpu2node() to the function
.cpuinit.text:numa_set_node() The function acpi_map_cpu2node()
references the function __cpuinit numa_set_node(). This is often
because acpi_map_cpu2node lacks a __cpuinit  annotation or the
annotation of numa_set_node is wrong.

WARNING: vmlinux.o(.text+0x526e77): Section mismatch in
reference from the function prealloc_protection_domains() to the
function .init.text:alloc_passthrough_domain() The function
prealloc_protection_domains() references the function __init
alloc_passthrough_domain(). This is often because
prealloc_protection_domains lacks a __init  annotation or the annotation of alloc_passthrough_domain is wrong.
Signed-off-by: NSteffen Persvold <sp@numascale.com>
Link: http://lkml.kernel.org/r/1331810188-24785-1-git-send-email-sp@numascale.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Fix the following section warning in drivers/iommu/amd_iommu.c :

WARNING: vmlinux.o(.text+0x526e77): Section mismatch in reference from the function prealloc_protection_domains() to the function .init.text:alloc_passthrough_domain()
The function prealloc_protection_domains() references
the function __init alloc_passthrough_domain().
This is often because prealloc_protection_domains lacks a __init
annotation or the annotation of alloc_passthrough_domain is wrong.

Cc: stable@vger.kernel.org
Signed-off-by: NSteffen Persvold <sp@numascale.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

On some systems the IVRS table does not contain all PCI
devices present in the system. In case a device not present
in the IVRS table is translated by the IOMMU no DMA is
possible from that device by default.
This patch fixes this by removing the DTE entry for every
PCI device present in the system and not covered by IVRS.

Cc: stable@vger.kernel.org # >= 3.0
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The IOMMUv2 driver added a few statistic counter which are
interesting in the iommu=pt mode too. So initialize the
statistic counter for that mode too.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This function can be used to find out which features
necessary for IOMMUv2 usage are available on a given device.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The symbolic register names for PCI and PASID changed in
PCI code. This patch adapts the AMD IOMMU driver to these
changes.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Add some interesting statistic counters for events when
IOMMUv2 is active.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Add infrastructure for errata-handling and handle two known
erratas in the IOMMUv2 code.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The AMD IOMMUv2 driver needs to get the IOMMUv2 domain
associated with a particular device. This patch adds a
function to get this information.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

To send completions for PPR requests this patch adds a
function which can be used by the IOMMUv2 driver.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This patch adds functions necessary to set and clear the
GCR3 values associated with a particular PASID in an IOMMUv2
domain.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The functions added with this patch allow to manage the
IOMMU and the device TLBs for all devices in an IOMMUv2
domain.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This patch adds support for protection domains that
implement two-level paging for devices.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This function can be used to switch a domain into
paging-mode 0. In this mode all devices can access physical
system memory directly without any remapping.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Add a notifer at which a module can attach to get informed
about incoming PPR faults.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

If the device starts to use IOMMUv2 features the dma handles
need to stay valid. The only sane way to do this is to use a
identity mapping for the device and not translate it by the
iommu. This is implemented with this patch. Since this lifts
the device-isolation there is also a new kernel parameter
which allows to disable that feature.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Convert the contents of 'struct dev_table_entry' to u64 to
allow updating the DTE wit 64bit writes as required by the
spec.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The option iommu=group_mf indicates the that the iommu driver should
expose all functions of a multi-function PCI device as the same
iommu_device_group.  This is useful for disallowing individual functions
being exposed as independent devices to userspace as there are often
hidden dependencies.  Virtual functions are not affected by this option.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Just use the amd_iommu_alias_table directly.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Let the IOMMU core know we support arbitrary page sizes (as long as
they're an order of 4KiB).

This way the IOMMU core will retain the existing behavior we're used to;
it will let us map regions that:
- their size is an order of 4KiB
- they are naturally aligned
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Cc: Joerg Roedel <Joerg.Roedel@amd.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>