- 07 7月, 2014 2 次提交
-
-
由 Hui Wang 提交于
BugLink: https://bugs.launchpad.net/bugs/1329580Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Joe Perches 提交于
print_nid_path has a possible buffer overflow if struct nid_path.path values are > 256. Avoid this and neaten the output to remove the leading ':' Neaten debug_badness to always verify arguments. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 7月, 2014 4 次提交
-
-
由 Konstantinos Tsimpoukas 提交于
This small patch completes #defines for Control/Status Register, adds comments for the missing ones there and on the Interrupt Mask Register and additionally corrects "#define ICE1712_SERR_LEVEL 0x04 -> 0x08", according to documentation. Signed-off-by: NKonstantinos Tsimpoukas <kostaslinuxxx@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Conflicts: sound/pci/hda/hda_intel.c
-
由 Mengdong Lin 提交于
For HSW/BDW display HD-A controller, hda_set_bclk() is defined to set BCLK by programming the M/N values as per the core display clock (CDCLK) queried from i915 display driver. And the audio driver will also set BCLK in azx_first_init() since the display driver can turn off the shared power in boot phase if only eDP is connected and M/N values will be lost and must be reprogrammed. Signed-off-by: NMengdong Lin <mengdong.lin@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jani Nikula 提交于
For Haswell and Broadwell, if the display power well has been disabled, the display audio controller divider values EM4 M VALUE and EM5 N VALUE will have been lost. The CDCLK frequency is required for reprogramming them to generate 24MHz HD-A link BCLK. So provide a private interface for the audio driver to query CDCLK. This is a stopgap solution until a more generic interface between audio and display drivers has been implemented. Signed-off-by: NJani Nikula <jani.nikula@intel.com> Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com> Signed-off-by: NMengdong Lin <mengdong.lin@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 7月, 2014 7 次提交
-
-
由 Sachin Kamat 提交于
'status' is not used in the function. Remove it. Signed-off-by: NSachin Kamat <sachin.kamat@samsung.com> Tested-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sachin Kamat 提交于
'err' is not used in the function. Remove it. Signed-off-by: NSachin Kamat <sachin.kamat@samsung.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sachin Kamat 提交于
'chip' is not used in the function. Remove it. Signed-off-by: NSachin Kamat <sachin.kamat@samsung.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The "list" field has been omitted from struct azx, but its initialization remained mistakenly in hda_tegra.c, which leads to a compile error: sound/pci/hda/hda_tegra.c: In function 'hda_tegra_create': sound/pci/hda/hda_tegra.c:481:22: error: 'struct azx' has no member named 'list' Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Fixes: 9a34af4a ('ALSA: hda - Move more PCI-controller-specific stuff from generic code') Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sachin Kamat 提交于
'prev' is not used in the function. Remove it. Signed-off-by: NSachin Kamat <sachin.kamat@samsung.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Sachin Kamat 提交于
'private_data' is not used in the function. Remove it. Signed-off-by: NSachin Kamat <sachin.kamat@samsung.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
- 30 6月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
The recent commit [6194b99d: ALSA: hda - Kill the rest of snd_print*() usages] changed the callback map_slaves(), but one call was forgotten to be replaced due to the cast, which leads to kernel Oops due to invalid function. This patch replaces it with a proper function. Fixes: 6194b99d ('ALSA: hda - Kill the rest of snd_print*() usages') Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 6月, 2014 9 次提交
-
-
由 Takashi Iwai 提交于
The similar fixup as T440 is needed for supporting the dock on T540. Reported-by: NJim Minter <jminter@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
Another quirk to make the headset mic work on some new Dell machines. Cc: Hui Wang <hui.wang@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1297581Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
ICH6_ prefix doesn't mean that it's specific to ICH6 chipset but rather its generic for all HD-audio (or "Azalia") devices. Use AZX_ prefix instead to align with other constants. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
It's no longer referred by anyone after standardizing with dev_*() macros. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The defined numbers of SDs are specific to hda-intel, so move them to there. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The very same notifier code is used in both hda_intel.c and hda_tegra.c. Move it to the generic code. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Just move struct fields between struct azx and struct hda_intel, and move some definitions from hda_priv.h to hda_intel.c. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
... and move most parts into hda_intel.c from the generic controller code. This is a clean up, and there should be no functional change by this patch. Now, struct azx obtains the generic callbacks for getting the position and the delay. As default NULL, posbuf is read. These replace the old position_fix[], and each is implemented as a callback. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
MAX_AZX_DEV is no longer referred anywhere, let's kill it. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 6月, 2014 3 次提交
-
-
由 Takashi Iwai 提交于
-
由 Mengdong Lin 提交于
For Intel Haswell/Broadwell display HD-A controller, the 24MHz HD-A link BCLK is converted from Core Display Clock (CDCLK): BCLK = CDCLK * M / N And there are two registers EM4 and EM5 to program M, N value respectively. The EM4/EM5 values will be lost and when the display power well is disabled. BIOS programs CDCLK selected by OEM and EM4/EM5, but BIOS has no idea about display power well on/off at runtime. So the M/N can be wrong if non-default CDCLK is used when the audio controller resumes, which results in an invalid BCLK and abnormal audio playback rate. So this patch saves and restores valid M/N values on controller suspend/resume. And 'struct hda_intel' is defined to contain standard HD-A 'struct azx' and Intel specific fields, as Takashi suggested. Signed-off-by: NMengdong Lin <mengdong.lin@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When a USB-audio device is disconnected while PCM is still running, we still see some race: the disconnect callback calls snd_usb_endpoint_free() that calls release_urbs() and then kfree() while a PCM stream would be closed at the same time and calls stop_endpoints() that leads to wait_clear_urbs(). That is, the EP object might be deallocated while a PCM stream is syncing with wait_clear_urbs() with the same EP. Basically calling multiple wait_clear_urbs() would work fine, also calling wait_clear_urbs() and release_urbs() would work, too, as wait_clear_urbs() just reads some fields in ep. The problem is the succeeding kfree() in snd_pcm_endpoint_free(). This patch moves out the EP deallocation into the later point, the destructor callback. At this stage, all PCMs must have been already closed, so it's safe to free the objects. Reported-by: NAlan Stern <stern@rowland.harvard.edu> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 6月, 2014 6 次提交
-
-
由 Takashi Iwai 提交于
HP Spectre 13 has the IDT 92HD95 codec, and BIOS seems to set the default high-pass filter in some "safer" range, which results in the very soft tone from the built-in speakers in contrast to Windows. Also, the mute LED control is missing, since 92HD95 codec still has no HP-specific fixups for GPIO setups. This patch adds these missing features: the HPF is adjusted by the vendor-specific verb, and the LED is set up from a DMI string (but with the default polarity = 0 assumption due to the incomplete BIOS on the given machine). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=74841 Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The static quirk code has been disabled for a while and it seems working fine, so it's time to actually get rid of it. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The static quirk code has been disabled for a while and it seems working fine, so it's time to actually get rid of it. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Pass the codec object so that we can replace all the rest of snd_print*() usages with the proper device-specific print helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Pass codec instance to each function that still prints info and debug outputs via snd_printd*(). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Rickard Strandqvist 提交于
A struct member variable is set to the same value more than once This was found using a static code analysis program called cppcheck. Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 6月, 2014 4 次提交
-
-
由 David Henningsson 提交于
This is cosmetical - it makes the pin quirk table look better. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
This is cosmetical - it makes the new pin quirk table look better. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Rickard Strandqvist 提交于
Added a missed break in a case statement This was found using a static code analysis program called cppcheck. Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
Two bug reporters with Dell XPS 15 report that they need to use the dell-headset-multi model to get the headset mic working. The two bug reporters have different PCI SSID (1028:05fd and 1028:05fe) but this pin quirk matches both. BugLink: https://bugs.launchpad.net/bugs/1331915Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 6月, 2014 4 次提交
-
-
由 Rasmus Villemoes 提交于
Add a newline and, while at it, remove a space and redundant braces. Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Pierre Ossman 提交于
We need to call the proper init function in case it has been overridden, as it might restore things that the generic routing doesn't know anything about. E.g. AMD cards have special verbs that need resetting. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=77901 Fixes: 5a613584 ('ALSA: hda - hdmi: Add ATI/AMD multi-channel audio support') Signed-off-by: NPierre Ossman <pierre@ossman.eu> Cc: <stable@vger.kernel.org> [v3.13+] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
A recent refactoring broke the possibility to manually specify model name as a module parameter. This patch restores the desired functionality. Fixes: c21c8cf7 ('ALSA: hda - Add fixup_forced flag') Reported-by: NKent Baxley <kent.baxley@canonical.com> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vinod Koul 提交于
In 64bit systems the compiler can default align to 8bytes causing mis-match with 32bit usermode. Avoid this is future by ensuring all the structures shared with usermode are packed and aligned to 4 bytes irrespective of arch used [coding style fixes by tiwai] Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-