- 13 10月, 2009 3 次提交
-
-
由 Valentine Barshak 提交于
Add ethtool set settings to pasemi_mac_ethtool. Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sarveshwar Bandi 提交于
Signed-off-by: NSarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
Create a new socket level option to report number of queue overflows Recently I augmented the AF_PACKET protocol to report the number of frames lost on the socket receive queue between any two enqueued frames. This value was exported via a SOL_PACKET level cmsg. AFter I completed that work it was requested that this feature be generalized so that any datagram oriented socket could make use of this option. As such I've created this patch, It creates a new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue overflowed between any two given frames. It also augments the AF_PACKET protocol to take advantage of this new feature (as it previously did not touch sk->sk_drops, which this patch uses to record the overflow count). Tested successfully by me. Notes: 1) Unlike my previous patch, this patch simply records the sk_drops value, which is not a number of drops between packets, but rather a total number of drops. Deltas must be computed in user space. 2) While this patch currently works with datagram oriented protocols, it will also be accepted by non-datagram oriented protocols. I'm not sure if thats agreeable to everyone, but my argument in favor of doing so is that, for those protocols which aren't applicable to this option, sk_drops will always be zero, and reporting no drops on a receive queue that isn't used for those non-participating protocols seems reasonable to me. This also saves us having to code in a per-protocol opt in mechanism. 3) This applies cleanly to net-next assuming that commit 97775007 (my af packet cmsg patch) is reverted Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 10月, 2009 20 次提交
-
-
由 David S. Miller 提交于
This reverts commit 97775007. Neil is reimplementing this generically, outside of AF_PACKET. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
ipv6 sit: Set relay to 0.0.0.0 directly if relay_prefixlen == 0. Do not use bit-shift if relay_prefixlen == 0; relay_prefix << 32 does not result in 0. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
ipv6 sit: Fix 6rd relay address. Relay's address should be extracted from real IPv6 address instead of configured prefix. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
ipv6 sit: Ensure to initialize 6rd parameters. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add iSCSI support for bnx2x devices. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NShmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add hardware and software structures for bnx2x devices. Signed-off-by: NMichael Chan <mchan@broadcom.com> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Refactor ring init. code for subsequent 10G patches. Also add rtnl_lock() in cnic_uio_open() to prevent race condition with netdev events. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add the main CNIC registration, callback, MAC addr. setup functions. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NShmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add code to initialize hardware blocks used for iSCSI. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NShmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
For iSCSI MAC address setup in later patches. Signed-off-by: NShmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Some of the SPQ (slow-path queue) operations will be used by the cnic code in later patches. Signed-off-by: NShmulik Ravid - Rabinovitz <shmulikr@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
rx_ring->sbq_buf_len now holds the length of the mapped portion of the buffer rather than the overall length. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
The driver has nothing to do, but this marker prevents the event from showing up 'not handled'. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Remove explicit setting of error reporting bits. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
- 10 10月, 2009 6 次提交
-
-
由 David S. Miller 提交于
We need PHY drivers to initialize in a static kernel before the MAC drivers that use them. So link them in first. Based upon a report by Felix Radensky. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
It is somewhat non-sensical to allow selecting wireless drivers without showing wireless core code options, and since the wext refactoring this has made it possible to generate configurations that will not build. Avoid this and make wireless drivers select the wireless options. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This came in through the patch titled: libertas: first stab at cfg80211 support I only noticed it because it breaks compat-wireless :) Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Acked-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Reported-by: sujith.manoharan@atheros.com Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
- 09 10月, 2009 11 次提交
-
-
由 Don Skidmore 提交于
This patch allows the recently added backplane device IDs that support KR to fail over to KX during link setup. This is accomplished by the new MAC link setup function ixgbe_setup_mac_link_smartspeed(). Comments were also updated to better document the reason for the delays chosen for KX, KX4, BX, BX4 and KR connections. Signed-off-by: NDon Skidmore <don.c.skidmore@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Don Skidmore 提交于
This patch will add the device ID for the 82599-based Ethernet Express Module X520-P2 SFI card. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Mitchell 提交于
Some of the EMAC V4 implementations support 16K Tx FIFOs. This patch adds support for this functionality and fixes typos in the Tx FIFO size error messages. Signed-off-by: NDave Mitchell <dmitchell@appliedmicro.com> Acked-by: NProdyut Hazarika <phazarika@appliedmicro.com> Acked-by: NVictor Gallardo <vgallardo@appliedmicro.com> Acked-by: NLoc Ho <lho@appliedmicro.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
This was accidentally omitted from one of the previous patches for firmware event handling. The handler needs to the enable firmware irq mask when it's done processing or it may not get any more events interrupts. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Call set_multi API after reset recovery. This was exposed by tripping tx_timeout. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Add wait for NIC fifo and MGMNT fifo to empty before applying reset. Otherwise broken frames can be processed by management processor and cause it to hang. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
The addresses were being added to the filter properly, but were not being enabled. This adds enable bit to filter write. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Broadcast/multicast should always be routed to the default (zeroeth) rx ring. Broadcast frames are already routed correctly. This fixes routing for multicast frames. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Currently frames are routed based on their type and MAC address. This patch adds the port number on which the frame arrived to the routing. This prevents problems in the case where both interfaces have the same MAC address in a routing configuration. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Fix RX queue table size and change from random to default hash values. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jin Dongming 提交于
(This patch fixes bug of commit f7734fdf title "make TLLAO option for NA packets configurable") When the IPV6 conf is used, the function sysctl_set_parent is called and the array addrconf_sysctl is used as a parameter of the function. The above patch added new conf "force_tllao" into the array addrconf_sysctl, but the size of the array was not modified, the static allocated size is DEVCONF_MAX + 1 but the real size is DEVCONF_MAX + 2, so the problem is that the function sysctl_set_parent accessed wrong address. I got the following information. Call Trace: [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e [<ffffffff8106085d>] sysctl_set_parent+0x29/0x3e [<ffffffff810622d5>] __register_sysctl_paths+0xde/0x272 [<ffffffff8110892d>] ? __kmalloc_track_caller+0x16e/0x180 [<ffffffffa00cfac3>] ? __addrconf_sysctl_register+0xc5/0x144 [ipv6] [<ffffffff8141f2c9>] register_net_sysctl_table+0x48/0x4b [<ffffffffa00cfaf5>] __addrconf_sysctl_register+0xf7/0x144 [ipv6] [<ffffffffa00cfc16>] addrconf_init_net+0xd4/0x104 [ipv6] [<ffffffff8139195f>] setup_net+0x35/0x82 [<ffffffff81391f6c>] copy_net_ns+0x76/0xe0 [<ffffffff8107ad60>] create_new_namespaces+0xf0/0x16e [<ffffffff8107afee>] copy_namespaces+0x65/0x9f [<ffffffff81056dff>] copy_process+0xb2c/0x12c3 [<ffffffff810576e1>] do_fork+0x14b/0x2d2 [<ffffffff8107ac4e>] ? up_read+0xe/0x10 [<ffffffff81438e73>] ? do_page_fault+0x27a/0x2aa [<ffffffff8101044b>] sys_clone+0x28/0x2a [<ffffffff81011fb3>] stub_clone+0x13/0x20 [<ffffffff81011c72>] ? system_call_fastpath+0x16/0x1b And the information of IPV6 in .config is as following. IPV6 in .config: CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y CONFIG_IPV6_OPTIMISTIC_DAD=y CONFIG_IPV6_MIP6=m CONFIG_IPV6_SIT=m # CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y CONFIG_IPV6_MROUTE=y CONFIG_IPV6_PIMSM_V2=y # CONFIG_IP_VS_IPV6 is not set CONFIG_NF_CONNTRACK_IPV6=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m I confirmed this patch fixes this problem. Signed-off-by: NJin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-