- 28 4月, 2007 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 21 2月, 2007 1 次提交
-
-
由 Trent Piepho 提交于
The out of tree v4l-dvb build system didn't always override the kernel's configuration settings with v4l-dvb's settings correctly. To work around this, makefiles would define some new macro based on the setting of a config variable. e.g. the pwc Makefile would define CONFIG_PWC_DEBUG if CONFIG_USB_PWC_DEBUG (which is defined via Kconfig) was set. The v4l-dvb build system should now always override correctly, and this is no longer necessary. This patch gets ride of these extra defines and just uses the CONFIG_* settings directly. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 04 10月, 2006 3 次提交
-
-
由 Steven Toth 提交于
A fix for intermittent oops's during boot which occurs in cx88_call_i2c_clients when dvb_attach is bringing up the frontend. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
The flags for mpeg capabilities are sub-optimally named as CX88_BOARD_DVB and CX88_BOARD_BLACKBIRD, which creates some confusion. This patch renames the above to CX88_MPEG_DVB and CX88_MPEG_BLACKBIRD. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Steven Toth 提交于
Some basic cleanup in preperation for a future patch where the cx88-mpeg functions have to deal with the port being used by multiple frontends in (mpeg2 hw encoder and dvb demod). Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 27 9月, 2006 1 次提交
-
-
由 Jean Delvare 提交于
i2c-algo-bit: Discard the mdelay data struct member The i2c_algo_bit_data structure has an mdelay member, which is not used by the algorithm code (the code has always been ifdef'd out.) Let's discard it to save some code and memory. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 26 9月, 2006 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Software I2C were using a very conservative value of udelay=16, meaning about 20Kbps. According with Philips I2C datasheet, the i2c should answer well for times at the order of 4.7 us. So, using udelay=5 should work for all devices. After this patch, the speed should be close to 66,67 Kbps, with the current kernel software bitbang, with 30/60 duty cycle. Anyway, added a new parameter (i2c_udelay) that would allow using conservative values, if eventually a hardware doesn't support the datasheet values. Thanks to Jean Delvare <khali@linux-fr.org> for pointing this improvement. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Several changes at register stuff were done since commit b45009b0, but I've forgot to add the copyright line for this. Those changes allowed cx88 to have multiple tuners, allowing it to support hardware with separated radio and video tuners. It also allows binding a tuner to an specific i2c address. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 26 6月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
remove the following unused hooks: - cx88-blackbird.c: cx88_ioctl_hook() - cx88-blackbird.c: cx88_ioctl_translator() make the following needlessly global functions static: - cx88-tvaudio.c: cx88_detect_nicam() remove the following unused EXPORT_SYMBOL's: - cx88-cards.c: cx88_bcount - cx88-cards.c: cx88_subids - cx88-cards.c: cx88_idcount - cx88-cards.c: cx88_card_list - cx88-cards.c: cx88_card_setup - cx88-core.c: cx88_start_audio_dma - cx88-core.c: cx88_stop_audio_dma - cx88-i2c.c: cx88_i2c_init Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 25 6月, 2006 1 次提交
-
-
由 Patrick Boettcher 提交于
V4L/DVB (4028): Change dvb_frontend_ops to be a real field instead of a pointer field inside dvb_frontend The dvb_frontend_ops is a pointer inside dvb_frontend. That's why every demod-driver is having a field of dvb_frontend_ops in its private-state-struct and using the reference for filling the pointer-field in dvb_frontend. - It saves at least two lines of code per demod-driver, - reduces object size (one less dereference per frontend_ops-access), - be coherent with dvb_tuner_ops, - makes it a little bit easier for newbies to understand how it works and - avoids stupid mistakes because you would have to copy the dvb_frontend_ops always, before you could assign the static pointer directly, which was dangerous. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 1月, 2006 3 次提交
-
-
由 Michael Krufky 提交于
- Now, all internal ioctls are at v4l2-common.h - removed unused ioctl at saa6752hs.h - all debug ioctl code moved to v4l2-common.c - removed duplicated stuff from other cards Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Michael Krufky 提交于
- Cleanup check for dvb. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Steven Toth 提交于
- Add support for the Hauppauge HVR1100 and HVR1100-LP products. - Add i2c_gate_ctrl callback function to dvb_frontend_ops struct. Signed-off-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
- 06 1月, 2006 1 次提交
-
-
由 Laurent Riffard 提交于
We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the drivers/media/video and usb/media drivers. Signed-off-by: NLaurent Riffard <laurent.riffard@free.fr> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 09 11月, 2005 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
- Whitespace Cleanups. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 9月, 2005 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
- Remove $Id CVS logs for V4L files - add ioctl indirection via cx88_ioctl_hook and cx88_ioctl_translator to cx88-blackbird.c. - declare the indirection hooks from cx88-blackbird.c. - dcprintk macro which uses core instead of dev->core on cx88-video.c. - replace dev->core occurances with core on cx88-video.c. - CodingStyle fixes. - MaxInput replaced by a define. - cx8801 structures moved from cx88.h. - The output_mode needs to be set for the Hauppauge Nova-T DVB-T for versions after 2.6.12. - Corrected GPIO values for cx88 cards #28 & #31 for s-video and composite. - Updated DViCO FusionHDTV5 Gold & added DVB support. - Fixed DViCO FusionHDTV 3 Gold-Q GPIO. - Some clean up in cx88-tvaudio.c - replaced hex values when writing to AUD_CTL to EN_xx for better reading. - Allow select by hand between Mono, Lang1, Lang2 and Stereo for BTSC. - Support for stereo NICAM and BTSC improved. - Broken stereo check removed. - Added support for remote control to Cinergy DVBT-1400. - local var renamed from rc5 to a better name (ircode). - LGDT330X QAM lock bug fixes. - Some reorg: move some bits to struct cx88_core, factor out common ioctl's to cx88_do_ioctl. - Get rid of '//' comments, replace them with #if 0 and /**/. - Minor clean-ups: remove dcprintk and replace all instances of "dev->core" with "core". - Added some registers to control PCI controller at CX2388x chips. - New tuner standby API. - Small mpeg fixes and cleanups for blackbird. - fix mpeg packet size & count - add VIDIOC_QUERYCAP ioctl for the mpeg stream - return more information in struct v4l2_format - fix default window height - small cleanups Signed-off-by: NUli Luckas <luckas@musoft.de> Signed-off-by: NTorsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NPatrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: NCatalin Climov <catalin@climov.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 9月, 2005 1 次提交
-
-
由 Jean Delvare 提交于
I2C_DEVNAME and i2c_clientname were introduced in 2.5.68 [1] to help media/video driver authors who wanted their code to be compatible with both Linux 2.4 and 2.6. The cause of the incompatibility has gone since [2], so I think we can get rid of them, as they tend to make the code harder to read and longer to preprocess/compile for no more benefit. I'd hope nobody seriously attempts to keep media/video driver compatible across Linux trees anymore, BTW. [1] http://marc.theaimsgroup.com/?l=linux-kernel&m=104930186524598&w=2 [2] http://www.linuxhq.com/kernel/v2.6/0-test3/include/linux/i2c.hSigned-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 28 7月, 2005 1 次提交
-
-
由 Michael Krufky 提交于
Rename lgdt3302 to lgdt330x, to make way for the addition of lgdt3303 support in future revisions. I am changing the name of this module now so that hopefully the name will be changed before the release of 2.6.13 ... It wouldn't make sense to release 2.6.13 with the name lgdt3302 in it, which will only be renamed to lgdt330x in later versions. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 7月, 2005 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
- Removed unused structures. - Removed BTTV version check. - Some debug structs moved to their own .c file and converted to static - Comment changed to express better when attach_inform is running - set_freq removed from set_mode at tuner-core.c. - I2C cleanups and converged to a basic reference structure. - Rename tuner structures fields. - It calls VIDIOC_G_FREQUENCY to get tuner freq from tuner. - added missing contrast offset value, set to 0. - Let Kconfig decide whether to include frontend-specific code. Signed-Off-By: NNickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 7月, 2005 1 次提交
-
-
由 Michael Krufky 提交于
Add dvb support in v4l for DViCO FusionHDTV3 Gold-Q using lgdt3302 frontend. Signed-off-by: NMac Michaels <wmichaels1@earthlink.net> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 6月, 2005 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
This patch adds support for various CX88 cards and allows specifying card addresses. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: Ncybercide@f2s.com <cybercide@f2s.com> Signed-off-by: NCatalin Climov <catalin@climov.com> Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 5月, 2005 1 次提交
-
-
由 Adrian Bunk 提交于
Another large rollup of various patches from Adrian which make things static where they were needlessly exported. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-