- 20 2月, 2014 1 次提交
-
-
由 Charles Keepax 提交于
The pin updates in this driver look like they are intended to be done atomically, update to do so. Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 18 10月, 2013 1 次提交
-
-
由 Dmitry Eremin-Solenikov 提交于
After convertion to snd_soc_register_card, platform driver should reference snd_soc_pm_ops callbacks to properly suspend/resume sound hardware. This was missed during conversion of PXA sound devices. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 09 12月, 2012 1 次提交
-
-
由 Bill Pemberton 提交于
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: NBill Pemberton <wfp5p@virginia.edu> Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 2月, 2012 1 次提交
-
-
由 Liam Girdwood 提交于
Currently ASoC can only add kcontrols using codec and platform component device handles. It's also desirable to add kcontrols for DAIs (i.e. McBSP) and for SoC card machine drivers too. This allows the kcontrol to have a direct handle to the parent ASoC component DAI/SoC Card/Platform/Codec device and hence easily get it's private data. This change makes snd_soc_add_controls() static and wraps it in the folowing calls (card and dai are new) :- snd_soc_add_card_controls() snd_soc_add_codec_controls() snd_soc_add_dai_controls() snd_soc_add_platform_controls() This patch also does a lot of small mechanical changes in individual codec drivers to replace snd_soc_add_controls() with snd_soc_add_codec_controls(). It also updates the McBSP DAI driver to use snd_soc_add_dai_controls(). Finally, it updates the existing machine drivers that register controls to either :- 1) Use snd_soc_add_card_controls() where no direct codec control is required. 2) Use snd_soc_add_codec_controls() where there is direct codec control. In the case of 1) above we also update the machine drivers to get the correct component data pointers from the kcontrol (rather than getting the machine pointer via the codec pointer). Signed-off-by: NLiam Girdwood <lrg@ti.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 22 12月, 2011 1 次提交
-
-
由 Axel Lin 提交于
Missed .owner of struct snd_soc_card will prevent the module from being removed from underneath its users. Reported-by: NLothar Waßmann <LW@KARO-electronics.de> Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 17 12月, 2011 1 次提交
-
-
由 Axel Lin 提交于
Use snd_soc_register_card() instead of creating a "soc-audio" platform device. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 08 10月, 2011 1 次提交
-
-
由 Mark Brown 提交于
The core will sync DAPM as part of the card initialization, there is no need for machine drivers to do so during their setup. OMAP drivers are omitted as I know Peter already has patches for them. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 25 2月, 2011 1 次提交
-
-
由 Dmitry Eremin-Solenikov 提交于
Correct names for pxa AC97 DAI are pxa2xx-ac97 and pxa2xx-ac97-aux. Fix that for all PXA platforms. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
- 27 1月, 2011 1 次提交
-
-
由 Mark Brown 提交于
In order to support cards instantiated without using soc-audio remove the use of the platform device in the card probe() and remove() ops. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 22 11月, 2010 1 次提交
-
-
由 Jarkko Nikula 提交于
There is no need to include soc-dapm.h since soc.h includes it. Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 11月, 2010 2 次提交
-
-
由 Liam Girdwood 提交于
Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
When doing anything with the system, especially DAPM, we need to hold the CODEC mutex. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 02 11月, 2010 1 次提交
-
-
由 Eric Miao 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 12 8月, 2010 1 次提交
-
-
由 Liam Girdwood 提交于
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: NTimur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: NRyan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: NTimur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 12 3月, 2009 1 次提交
-
-
由 Philipp Zabel 提交于
The drivers are basically duplicating the same code over and over. As snd_soc_cnew is going to be made static some time after the next merge window, we might as well convert them now. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 09 3月, 2009 1 次提交
-
-
由 Eric Miao 提交于
pxa-regs.h and hardware.h are not intended for use directly in driver code, remove those unnecessary references. Signed-off-by: NEric Miao <eric.miao@marvell.com>
-
- 11 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The snd_soc_codec was moved into socdev->card, but this change wasn't applied in some places. Fixed now. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 12月, 2008 1 次提交
-
-
由 Mark Brown 提交于
As part of the deprecation of snd_soc_device push the registration of the platform down into the card structure. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 25 11月, 2008 1 次提交
-
-
由 Dmitry Baryshkov 提交于
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 21 11月, 2008 1 次提交
-
-
由 Mark Brown 提交于
One of the issues with the ASoC v1 API which has been addressed in the ASoC v2 work that Liam Girdwood has done is that the ALSA card provided by ASoC is distributed around the ASoC structures. For example, machine wide data such as the struct snd_card are maintained as part of the CODEC data structure, preventing the use of multiple codecs. This has been addressed by refactoring the data structures so that all the data for the ALSA card is contained in a single structure snd_soc_card which replaces the existing snd_soc_machine and snd_soc_device. Begin the process of backporting this by renaming struct snd_soc_machine to struct snd_soc_card, better reflecting its function and bringing it closer to standard ALSA terminology. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 13 10月, 2008 2 次提交
-
-
由 Liam Girdwood 提交于
Update the contact information for Liam Girdwood in ASoC core and drivers as my old email address is no longer valid. Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 8月, 2008 1 次提交
-
-
由 Russell King 提交于
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 29 7月, 2008 1 次提交
-
-
由 Huang Weiyi 提交于
Removed duplicated include <asm/arch/tosa.h> in sound/soc/pxa/tosa.c. Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 7月, 2008 2 次提交
-
-
由 Dmitry Baryshkov 提交于
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Liam Girdwood 提交于
Refactored snd_soc_dapm_set_endpoint() to snd_soc_dapm_enable_pin() and snd_soc_dapm_disable_pin(). Renamed snd_soc_dapm_sync_endpoints() to snd_soc_dapm_sync(). Renamed snd_soc_dapm_get_endpoint_status() to snd_soc_dapm_get_pin_status(). Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 07 7月, 2008 1 次提交
-
-
由 Dmitry Baryshkov 提交于
The sound/soc/pxa/tosa.c contains dependencies on parts that never ever hit mainline. Replace them with current support for tc6393xb. Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 5月, 2008 2 次提交
-
-
由 Mark Brown 提交于
The overwhelming majority just say 'initial version' anyway. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 29 2月, 2008 1 次提交
-
-
由 Jarkko Nikula 提交于
Add kcontrol argument to functions since the API was changed by the commit 9af6d956. Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 2月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 09 2月, 2007 2 次提交
-
-
由 Liam Girdwood 提交于
This patch updates the Sharp tosa machine driver to the new API in ASoC 0.13. Changes:- o Update machine operations to new API. Signed-off-by: NLiam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Liam Girdwood 提交于
This patch adds Alsa audio support to the Sharp Zaurus SL-C6000 (Tosa) machine. From: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: NDirk Opfer <Dirk@Opfer-Online.de> Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-