Convert a guest frame number to the corresponding host virtual address.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Check for the "error hva", an address outside the user address space that
signals a bad gfn.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

it is removed beacuse it isnt supported on a real host
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Add wbinvd VM Exit support to prepare for pass-through
device cache emulation and also enhance real time
responsiveness.
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Add comments for secondary/primary Processor-Based VM-execution controls.
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

If vmx fails to inject a real-mode interrupt while fetching the interrupt
redirection table, it fails to record this in the vectoring information
field.  So we detect this condition and do it ourselves.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

We'll want to write to it in order to fix real-mode irq injection problems,
but it is a read-only field.  Storing it in a variable solves that issue.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instead of injecting real-mode interrupts by writing the interrupt frame into
guest memory, abuse vmx by injecting a software interrupt.  We need to
pretend the software interrupt instruction had a length > 0, so we have to
adjust rip backward.

This lets us not to mess with writing guest memory, which is complex and also
sleeps.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Every write access to guest pages should be tracked.
Signed-off-by: NDor Laor <dor.laor@qumranet.com>
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NAvi Kivity <avi@qumranet.com>

Recommended by Izik Eidus.
Signed-off-by: NUri Lublin <uril@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Now that rex_prefix is part of the decode cache, there is no need to pass
it along.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instructions like 'inc reg' that have the register operand encoded
in the opcode are currently specially decoded.  Extend
decode_register_operand() to handle that case, indicated by having
DstReg or SrcReg without ModRM.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Share the common parts of SrcReg and DstReg decoding.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves implementation of the following functions from
kvm_main.c to x86.c:
free_pio_guest_pages, vcpu_find_pio_dev, pio_copy_data, complete_pio,
kernel_pio, pio_string_write, kvm_emulate_pio, kvm_emulate_pio_string

The function inject_gp, which was duplicated by yesterday's patch
series, is removed from kvm_main.c now because it is not needed anymore.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves the following functions to from kvm_main.c to x86.c:
emulator_read/write_std, vcpu_find_pervcpu_dev, vcpu_find_mmio_dev,
emulator_read/write_emulated, emulator_write_phys,
emulator_write_emulated_onepage, emulator_cmpxchg_emulated,
get_setment_base, emulate_invlpg, emulate_clts, emulator_get/set_dr,
kvm_report_emulation_failure, emulate_instruction

The following data type is moved to x86.c:
struct x86_emulate_ops emulate_ops
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves the implementation of the functions of kvm_get/set_msr,
kvm_get/set_msr_common, and set_efer from kvm_main.c to x86.c. The
definition of EFER_RESERVED_BITS is moved too.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

KVM's nopage handler calls gfn_to_page() which acquires the mmap_sem when
calling out to get_user_pages().  nopage handlers are already invoked with the
mmap_sem held though.  Introduce a __gfn_to_page() for use by the nopage
handler which requires the lock to already be held.

This was noticed by tglx.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch based on CR8/TPR patch, and enable the TPR shadow (FlexPriority)
for 32bit Windows.  Since TPR is accessed very frequently by 32bit
Windows, especially SMP guest, with FlexPriority enabled, we saw significant
performance gain.
Signed-off-by: NSheng Yang <sheng.yang@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves the definitions of CR0_RESERVED_BITS,
CR4_RESERVED_BITS, and CR8_RESERVED_BITS along with the following
functions from kvm_main.c to x86.c:
set_cr0(), set_cr3(), set_cr4(), set_cr8(), get_cr8(), lmsw(),
load_pdptrs()
The static function wrapper inject_gp is duplicated in kvm_main.c and
x86.c for now, the version in kvm_main.c should disappear once the last
user of it is gone too.
The function load_pdptrs is no longer static, and now defined in x86.h
for the time being, until the last user of it is gone from kvm_main.c.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves the implementation of get_apic_base and set_apic_base
from kvm_main.c to x86.c
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch moves the definition of segment_descriptor_64 for AMD64 and
EM64T from kvm_main.c to segment_descriptor.h. It also adds a proper
#ifndef...#define...#endif around that header file.
The implementation of segment_base is moved from kvm_main.c to x86.c.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch splits kvm_vm_ioctl into archtecture independent parts, and
x86 specific parts which go to kvm_arch_vcpu_ioctl in x86.c.
The patch is unchanged since last submission.

Common ioctls for all architectures are:
KVM_CREATE_VCPU, KVM_GET_DIRTY_LOG, KVM_SET_USER_MEMORY_REGION

x86 specific ioctls are:
KVM_SET_MEMORY_REGION,
KVM_GET/SET_NR_MMU_PAGES, KVM_SET_MEMORY_ALIAS, KVM_CREATE_IRQCHIP,
KVM_CREATE_IRQ_LINE, KVM_GET/SET_IRQCHIP
KVM_SET_TSS_ADDR
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NHollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Emulation may cause a shadow pte to be instantiated, which requires
memory resources.  Make sure the caches are filled to avoid an oops.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The code that dispatches the page fault and emulates if we failed to map
is duplicated across vmx and svm.  Merge it to simplify further bugfixing.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The 'mov abs' instruction family (opcodes 0xa0 - 0xa3) still depends on cr2
provided by the page fault handler.  This is wrong for several reasons:

- if an instruction accessed misaligned data that crosses a page boundary,
  and if the fault happened on the second page, cr2 will point at the
  second page, not the data itself.

- if we're emulating in real mode, or due to a FlexPriority exit, there
  is no cr2 generated.

So, this change adds decoding for this instruction form and drops reliance
on cr2.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch lets GCC to determine which registers to save when we
switch to/from a VCPU in the case of AMD i386

* Original code saves following registers:

    ebx, ecx, edx, esi, edi, ebp

* Patched code:

  - informs GCC that we modify following registers
    using the clobber description:

    ebx, ecx, edx, esi, edi

  - rbp is saved (pop/push) because GCC seems to ignore its use in the clobber
    description.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch lets GCC to determine which registers to save when we
switch to/from a VCPU in the case of AMD x86_64.

* Original code saves following registers:

    rbx, rcx, rdx, rsi, rdi, rbp,
    r8, r9, r10, r11, r12, r13, r14, r15

* Patched code:

  - informs GCC that we modify following registers
    using the clobber description:

    rbx, rcx, rdx, rsi, rdi
    r8, r9, r10, r11, r12, r13, r14, r15

  - rbp is saved (pop/push) because GCC seems to ignore its use in the clobber
    description.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch lets GCC to determine which registers to save when we
switch to/from a VCPU in the case of intel i386.

* Original code saves following registers:

    eax, ebx, ecx, edx, edi, esi, ebp (using popa)

* Patched code:

  - informs GCC that we modify following registers
    using the clobber description:

    ebx, edi, rsi

  - doesn't save eax because it is an output operand (vmx->fail)

  - cannot put ecx in clobber description because it is an input operand,
    but as we modify it and we want to keep its value (vcpu), we must
    save it (pop/push)

  - ebp is saved (pop/push) because GCC seems to ignore its use the clobber
    description.

  - edx is saved (pop/push) because it is reserved by GCC (REGPARM) and
    cannot be put in the clobber description.

  - line "mov (%%esp), %3 \n\t" has been removed because %3
    is ecx and ecx is restored just after.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This patch lets GCC to determine which registers to save when we
switch to/from a VCPU in the case of intel x86_64.

* Original code saves following registers:

    rax, rbx, rcx, rdx, rsi, rdi, rbp,
    r8, r9, r10, r11, r12, r13, r14, r15

* Patched code:

  - informs GCC that we modify following registers
    using the clobber description:

    rbx, rdi, rsi,
    r8, r9, r10, r11, r12, r13, r14, r15

  - doesn't save rax because it is an output operand (vmx->fail)

  - cannot put rcx in clobber description because it is an input operand,
    but as we modify it and we want to keep its value (vcpu), we must
    save it (pop/push)

  - rbp is saved (pop/push) because GCC seems to ignore its use in the clobber
    description.

  - rdx is saved (pop/push) because it is reserved by GCC (REGPARM) and
    cannot be put in the clobber description.

  - line "mov (%%rsp), %3 \n\t" has been removed because %3
    is rcx and rcx is restored just after.

  - line ASM_VMX_VMWRITE_RSP_RDX() is moved out of the ifdef/else/endif
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently kvm has a wart in that it requires three extra pages for use
as a tss when emulating real mode on Intel.  This patch moves the allocation
internally, only requiring userspace to tell us where in the physical address
space we can place the tss.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Reserve a few memory slots for kernel internal use.  This is good for case
you have to register memory region and you want to be sure it was not
registered from userspace, and for case you want to register a memory region
that won't be seen from userspace.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Remove kvm memory slot allocation mechanism from the ioctl
and put it to exported function.
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

kvm_vm_ioctl_set_memory_region() is able to remove memory in addition to
adding it.  Therefore when using kernel swapping support for old userspaces,
we need to munmap the memory if the user request to remove it
Signed-off-by: NIzik Eidus <izike@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Currently kvm provides hypercalls only for x86* architectures. To
provide hypercall infrastructure for other kvm architectures I split
kvm_para.h into a generic header file and architecture specific
definitions.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>