split bus_add_device() and send device uevents after sysfs population
Signed-off-by: NKay Sievers <kay.sievers@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NKay Sievers <kay.sievers@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

These really need to be fixed, shout it out to the world.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (30 commits)
  [PATCH] PCI Hotplug: Fix recovery path from errors during pcie_init()
  [PATCH] PCI Hotplug: fake NULL pointer dereferences in IBM Hot Plug Controller Driver
  [PATCH] shpchp: Cleanup improper info messages
  [PATCH] shpchp: Remove Unused hpc_evelnt_lock
  [PATCH] shpchp: Cleanup interrupt polling timer
  [PATCH] shpchp: Cleanup SHPC commands
  [PATCH] shpchp: Cleanup interrupt handler
  [PATCH] shpchp: Remove unnecessary hpc_ctlr_handle check
  [PATCH] pciehp: Implement get_address callback
  [PATCH] pciehp: Add missing pci_dev_put
  [PATCH] pciehp: Replace pci_find_slot() with pci_get_slot()
  [PATCH] SGI Hotplug: Incorrect power status
  [PATCH] shpchp: Create shpchpd at controller probe time
  [PATCH] shpchp: Mask Global SERR and Intr at controller release time
  [PATCH] SHPC: Fix SHPC Contoller SERR-INT Register bits access
  [PATCH] SHPC: Fix SHPC Logical Slot Register bits access
  [PATCH] SHPC: Cleanup SHPC Logical Slot Register bits access
  [PATCH] SHPC: Cleanup SHPC Logical Slot Register access
  [PATCH] SHPC: Cleanup SHPC register access
  [PATCH] pciehp: Fix programming hotplug parameters
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits)
  [SCSI] 53c700: remove reliance on deprecated cmnd fields
  [SCSI] hptiop: don't use cmnd->bufflen
  [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver
  [SCSI] aacraid: small misc. cleanups
  [SCSI] aacraid: Update supported product information
  [SCSI] aacraid: Fix return code interpretation
  [SCSI] scsi_transport_sas: fix panic in sas_free_rphy
  [SCSI] remove RQ_SCSI_* flags
  [SCSI] remove scsi_request infrastructure
  [SCSI] mptfusion: change driver revision to 3.03.10
  [SCSI] mptfc: abort of board reset leaves port dead requiring reboot
  [SCSI] mptfc: fix fibre channel infinite request/response loop
  [SCSI] mptfc: set fibre channel fw target missing timers to one second
  [SCSI] mptfusion: move fc event/reset handling to mptfc
  [SCSI] spi transport: don't allow dt to be set on SE or HVD buses
  [SCSI] aic7xxx: expose the bus setting to sysfs
  [SCSI] scsi: remove Documentation/scsi/cpqfc.txt
  [SCSI] drivers/scsi: Use ARRAY_SIZE macro
  [SCSI] Remove last page_address from dc395x.c
  [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver
  ...

Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to
the sparc interrupt cleanups)

Introduce __iowrite64_copy.  It will be used by the Myri-10G Ethernet
driver to post requests to the NIC.  This driver will be submitted soon.

__iowrite64_copy copies to I/O memory in units of 64 bits when possible (on
64 bit architectures).  It reverts to __iowrite32_copy on 32 bit
architectures.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6: (28 commits)
  eth1394: replace __constant_htons by htons
  ieee1394: adjust code formatting in highlevel.c
  ieee1394: hl_irqs_lock is taken in hardware interrupt context
  ieee1394_core: switch to kthread API
  ieee1394: sbp2: Kconfig fix
  ieee1394: add preprocessor constant for invalid csr address
  sbp2: fix deregistration of status fifo address space
  [PATCH] eth1394: endian fixes
  Fix broken suspend/resume in ohci1394
  sbp2: use __attribute__((packed)) for on-the-wire structures
  sbp2: provide helptext for CONFIG_IEEE1394_SBP2_PHYS_DMA and mark it experimental
  Update feature removal of obsolete raw1394 ISO requests.
  sbp2: fix S800 transfers if phys_dma is off
  sbp2: remove ohci1394 specific constant
  ohci1394: make phys_dma parameter read-only
  ohci1394: set address range properties
  ieee1394: extend lowlevel API for address range properties
  sbp2: log number of supported concurrent logins
  sbp2: remove manipulation of inquiry response
  ieee1394: save RAM by using a single tlabel for broadcast transactions
  ...

It also adds all the related quad routines.
Signed-off-by: NCedric Le Goater <clg@fr.ibm.com>
Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The color is now in the low bits of the parent pointer, and initializing
it to 0 happens as part of the whole memset above, so just remove the
unnecessary RB_CLEAR_COLOR.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There has been an update to the forcedeth driver that added a few new
uses of xmit_lock which is no longer meant to be used directly.  This
patch replaces them with netif_tx_lock_bh.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (42 commits)
  [ARM] Fix tosa build error
  [ARM] 3610/1: Make reboot work on Versatile
  [ARM] 3609/1: S3C24XX: defconfig update for s3c2410_defconfig
  [ARM] 3591/1: Anubis: IDE device definitions
  [ARM] Include asm/hardware.h not asm/arch/hardware.h
  [ARM] 3594/1: Poodle: Add touchscreen support + other updates
  [ARM] 3564/1: sharpsl_pm: Abstract some machine specific parameters
  [ARM] 3561/1: Poodle: Correct the MMC/SD power control
  [ARM] 3593/1: Add reboot and shutdown handlers for Zaurus handhelds
  [ARM] 3599/1: AT91RM9200 remove global variables
  [ARM] 3607/1: AT91RM9200 misc fixes
  [ARM] 3605/1: AT91RM9200 Power Management
  [ARM] 3604/1: AT91RM9200 New boards
  [ARM] 3603/1: AT91RM9200 remove old files
  [ARM] 3592/1: AT91RM9200 Serial driver update
  [ARM] 3590/1: AT91RM9200 Platform devices support
  [ARM] 3589/1: AT91RM9200 DK/EK board update
  [ARM] 3588/1: AT91RM9200 CSB337/637 board update
  [ARM] 3587/1: AT91RM9200 hardware headers
  [ARM] 3586/1: AT91RM9200 header update
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [ATM]: fix broken uses of NIPQUAD in net/atm
  [SCTP]: sctp_unpack_cookie() fix
  [SCTP]: Fix unintentional change to SCTP_ASSERT when !SCTP_DEBUG
  [NET]: Prevent multiple qdisc runs
  [CONNECTOR]: Initialize subsystem earlier.
  [NETFILTER]: xt_sctp: fix endless loop caused by 0 chunk length

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Update defconfig.
  [SPARC64]: Don't double-export synchronize_irq.
  [SPARC64]: Move over to GENERIC_HARDIRQS.
  [SPARC64]: Virtualize IRQ numbers.
  [SPARC64]: Kill ino_bucket->pil
  [SPARC]: Kill __irq_itoa().
  [SPARC64]: bp->pil can never be zero
  [SPARC64]: Send all device interrupts via one PIL.
  [SPARC]: Fix iommu_flush_iotlb end address
  [SPARC]: Mark smp init functions as cpuinit
  [SPARC]: Add missing rw can_lock macros
  [SPARC]: Setup cpu_possible_map
  [SPARC]: Add topology_init()

* 'rio.b19' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/bird:
  [PATCH] missing readb/readw in rio
  [PATCH] copy_to_user() from iomem is a bad thing
  [PATCH] forgotten swap of copyout() arguments
  [PATCH] handling rio MEMDUMP
  [PATCH] fix rio_copy_to_card() for OLDPCI case
  [PATCH] uses of ->Copy() in rioroute are bogus
  [PATCH] bogus order of copy_from_user() arguments
  [PATCH] rio ->Copy() expects the sourse as first argument
  [PATCH] trivial annotations in rio

* 'audit.b21' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: (25 commits)
  [PATCH] make set_loginuid obey audit_enabled
  [PATCH] log more info for directory entry change events
  [PATCH] fix AUDIT_FILTER_PREPEND handling
  [PATCH] validate rule fields' types
  [PATCH] audit: path-based rules
  [PATCH] Audit of POSIX Message Queue Syscalls v.2
  [PATCH] fix se_sen audit filter
  [PATCH] deprecate AUDIT_POSSBILE
  [PATCH] inline more audit helpers
  [PATCH] proc_loginuid_write() uses simple_strtoul() on non-terminated array
  [PATCH] update of IPC audit record cleanup
  [PATCH] minor audit updates
  [PATCH] fix audit_krule_to_{rule,data} return values
  [PATCH] add filtering by ppid
  [PATCH] log ppid
  [PATCH] collect sid of those who send signals to auditd
  [PATCH] execve argument logging
  [PATCH] fix deadlocks in AUDIT_LIST/AUDIT_LIST_RULES
  [PATCH] audit_panic() is audit-internal
  [PATCH] inotify (5/5): update kernel documentation
  ...

Manual fixup of conflict in unclude/linux/inotify.h

tosa.c references mdelay(), but was missing linux/delay.h
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* git://git.infradead.org/hdrcleanup-2.6: (63 commits)
  [S390] __FD_foo definitions.
  Switch to __s32 types in joystick.h instead of C99 types for consistency.
  Add <sys/types.h> to headers included for userspace in <linux/input.h>
  Move inclusion of <linux/compat.h> out of user scope in asm-x86_64/mtrr.h
  Remove struct fddi_statistics from user view in <linux/if_fddi.h>
  Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390
  Revert include/media changes: Mauro says those ioctls are only used in-kernel(!)
  Include <linux/types.h> and use __uXX types in <linux/cramfs_fs.h>
  Use __uXX types in <linux/i2o_dev.h>, include <linux/ioctl.h> too
  Remove private struct dx_hash_info from public view in <linux/ext3_fs.h>
  Include <linux/types.h> and use __uXX types in <linux/affs_hardblocks.h>
  Use __uXX types in <linux/divert.h> for struct divert_blk et al.
  Use __u32 for elf_addr_t in <asm-powerpc/elf.h>, not u32. It's user-visible.
  Remove PPP_FCS from user view in <linux/ppp_defs.h>, remove __P mess entirely
  Use __uXX types in user-visible structures in <linux/nbd.h>
  Don't use 'u32' in user-visible struct ip_conntrack_old_tuple.
  Use __uXX types for S390 DASD volume label definitions which are user-visible
  S390 BIODASDREADCMB ioctl should use __u64 not u64 type.
  Remove unneeded inclusion of <linux/time.h> from <linux/ufs_fs.h>
  Fix private integer types used in V4L2 ioctls.
  ...

Manually resolve conflict in include/linux/mtd/physmap.h

* git://git.infradead.org/~dwmw2/rbtree-2.6:
  [RBTREE] Switch rb_colour() et al to en_US spelling of 'color' for consistency
  Update UML kernel/physmem.c to use rb_parent() accessor macro
  [RBTREE] Update hrtimers to use rb_parent() accessor macro.
  [RBTREE] Add explicit alignment to sizeof(long) for struct rb_node.
  [RBTREE] Merge colour and parent fields of struct rb_node.
  [RBTREE] Remove dead code in rb_erase()
  [RBTREE] Update JFFS2 to use rb_parent() accessor macro.
  [RBTREE] Update eventpoll.c to use rb_parent() accessor macro.
  [RBTREE] Update key.c to use rb_parent() accessor macro.
  [RBTREE] Update ext3 to use rb_parent() accessor macro.
  [RBTREE] Change rbtree off-tree marking in I/O schedulers.
  [RBTREE] Add accessor macros for colour and parent fields of rb_node

* git://git.infradead.org/mtd-2.6: (199 commits)
  [MTD] NAND: Fix breakage all over the place
  [PATCH] NAND: fix remaining OOB length calculation
  [MTD] NAND Fixup NDFC merge brokeness
  [MTD NAND] S3C2410 driver cleanup
  [MTD NAND] s3c24x0 board: Fix clock handling, ensure proper initialisation.
  [JFFS2] Check CRC32 on dirent and data nodes each time they're read
  [JFFS2] When retiring nextblock, allocate a node_ref for the wasted space
  [JFFS2] Mark XATTR support as experimental, for now
  [JFFS2] Don't trust node headers before the CRC is checked.
  [MTD] Restore MTD_ROM and MTD_RAM types
  [MTD] assume mtd->writesize is 1 for NOR flashes
  [MTD NAND] Fix s3c2410 NAND driver so it at least _looks_ like it compiles
  [MTD] Prepare physmap for 64-bit-resources
  [JFFS2] Fix more breakage caused by janitorial meddling.
  [JFFS2] Remove stray __exit from jffs2_compressors_exit()
  [MTD] Allow alternate JFFS2 mount variant for root filesystem.
  [MTD] Disconnect struct mtd_info from ABI
  [MTD] replace MTD_RAM with MTD_GENERIC_TYPE
  [MTD] replace MTD_ROM with MTD_GENERIC_TYPE
  [MTD] remove a forgotten MTD_XIP
  ...

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] PARPORT_SERIAL should depend on SERIAL_8250_PCI

* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] Add (MMC) to entry in MAINTAINERS file
  [MMC] sdhci truncated pointer fix

* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits)
  [ARM] 3559/1: S3C2442: core and serial port
  [ARM] 3557/1: S3C24XX: centralise and cleanup uart registration
  [ARM] 3558/1: SMDK24XX: LED platform devices
  [ARM] 3534/1: add spi support to lubbock platform
  [ARM] 3554/1: ARM: Fix dyntick locking
  [ARM] 3553/1: S3C24XX: earlier print of cpu idcode info
  [ARM] 3552/1: S3C24XX: Move VA of GPIO for low-level debug
  [ARM] 3551/1: S3C24XX: PM code failes to compile with CONFIG_DCACHE_WRITETHROUGH
  [ARM] 3550/1: OSIRIS: fix serial port map for 1:1
  [ARM] 3548/1: Fix the ARMv6 CPU id in compressed/head.S
  [ARM] 3335/1: Old-abi Thumb sys_syscall broken
  [ARM] 3467/1: [3/3] Support for Philips PNX4008 platform: defconfig
  [ARM] 3466/1: [2/3] Support for Philips PNX4008 platform: chip support
  [ARM] 3465/1: [1/3] Support for Philips PNX4008 platform: headers
  [ARM] 3407/1: lpd7x: documetation update
  [ARM] 3406/1: lpd7x: compilation fix for smc91x
  [ARM] 3405/1: lpd7a40x: CPLD ssp driver
  [ARM] 3404/1: lpd7a40x: AMBA CLCD support
  [ARM] 3403/1: lpd7a40x: updated default configurations
  [ARM] 3402/1: lpd7a40x: serial driver bug fix
  ...

Patch from Deepak Saxena

This patch makes soft reboot work on the Versatile board. Thanks to
Catalin Marinas @ ARM for pointing out the proper way to do this.
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Following problems are addressed:

- wrong status caused early break out of nand_wait()
- removed the bogus status check in nand_wait() which
  is a relict of the abandoned support for interrupted
  erase.
- status check moved to the correct place in read_oob
- oob support for syndrom based ecc with strange layouts
- use given offset in the AUTOOOB based oob operations

Partially based on a patch from Vitaly Vool <vwool@ru.mvista.com>
Thanks to Savin Zlobec <savin@epico.si> for tracking down the
status problem.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

In nand_read_page_syndrome/nand_write_page_syndrome the calculation of
the remaining oob length which is not used by the prepad/ecc/postpad
areas is wrong.
Signed-off-by: NVitaly Wool <vwool@ru.mvista.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Remove the remains of a broken merge.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Andrew Victor

This patch removes some now unnecessary global variables -
at91_master_clock, at91_serial_map, at91_console_port.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Ben Dooks

Update s3c2410_defconfig to latest kernel with the
latest patches
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Andrew Victor

This final patch includes some general fixes.

1. Link in pm.o if CONFIG_PM is enabled.  [Should have been included in
patch 3605/1].
2. Use __raw_readl()/__raw_writel() when accessing System Peripheral
registers.
3. Removed some unnecessary includes
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Andrew Victor

This patch adds the core Power Management support for the AT91RM9200
processor.  It will support suspend-to-RAM and standby modes.

The suspend-to-RAM functionality is not 100% complete.  The code that
needs to be execute from the internal SRAM to restore the system is
outstanding.  For now we just fall through to Standby mode.

The AT91-specific at91_suspend_entering_slow_clock() function will
eventually be replaced by clk_must_disable() once that functionality is
added to mainline clock API.

Patch from David Brownell.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Andrew Victor

This patch adds support for an additional 4 AT91RM9200-based boards:

1. Conitec ARM&EVA  [MACH_CARMEVA]
   (http://www.conitec.net/english/linuxboard.htm)

2. KwikByte KB920x  [MACH_KB9200]
   (http://kwikbyte.com/KB9202_description_new.htm)

3. Embest ATEB9200  [MACH_ATEB9200]
   (http://www.embedinfo.com/english/product/ATEB9200.asp)

4. Sperry-Sun KAFA board  [MACH_KAFA]
   (unknown)
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Andrew Victor

This patch removes the now unnecessary
include/asm-arm/arch-at91rm9200/pio.h file.  The pin configuration is
now handled in the platform-device setup code
(arch/arm/mach-at91rm9200/devices.c).
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Liam Girdwood

This patch adds some new PXA27x SSP port registers and also fixes the
SSP slots per frame macro

Changes:-

 o SSCR0_SlotPerFrm fixed
 o Added SSP port TSA, RSA, TSS and ACD registers
Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

Fix two typos in include/asm-arm/arch-ixp23xx.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

NIPQUAD expects an l-value of type __be32, _NOT_ a pointer to __be32.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>