Rather than having to read the latency values out every time, just
store them in dev_priv.

On ILK and IVB there is a difference between some of the latency
values for different planes, so store the latency values for each
plane type separately, and apply the necesary fixups during init.

v2: Fix some checkpatch complaints
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

ILK has a slightly different way to read out the watermark
latency values. On ILK the LP0 latenciy values are in fact
not stored in any register, and instead we must use fixed
values.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Hangcheck, and some of the recent reset code for guilty batches need to
know which address space the object was in at the time of a hangcheck.
This is because we use offsets in the (PP|G)GTT to determine this
information, and those offsets can differ depending on which VM they are
bound into.

Since we still only have 1 VM ever, this code shouldn't yet have any
impact.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With multiple VMs, the eviction code benefits from being able to blindly
put pages without needing to know if there are any entities still
holding on to those pages. As such it's preferable to return the -EBUSY
before the BUG.

Eviction code is the only user for now, but overall it makes sense
anyway, IMO.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For now, objects will maintain the same cache levels amongst all address
spaces. This is to limit the risk of bugs, as playing with cacheability
in the different domains can be very error prone.

In the future, it may be optimal to allow setting domains per VMA (ie.
an object bound into an address space).
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This represents the first half of hooking up VMs to execbuf. Here we
basically pass an address space all around to the different internal
functions. It should be much more readable, and have less risk than the
second half, which begins switching over to using VMAs instead of an
obj,vm.

The overall series echoes this style of, "add a VM, then make it smart
later"
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
[danvet: Switch a BUG_ON to WARN_ON.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Make it aware of which domain it is bound into GGTT, or PPGTT.

While modifying the function, add a global gtt flag to the object
description. Global is more interesting than aliasing since aliasing is
the default.

v2: Access VMA directly for start/size instead of helpers (Daniel)
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just some small cleanups, and a rename of vm->ggtt_vm requested by
Daniel.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To verbalize it, one can say, "pin an object into the given address
space." The semantics of pinning remain the same otherwise.

Certain objects will always have to be bound into the global GTT.
Therefore, global GTT is a special case, and keep a special interface
around for it (i915_gem_obj_ggtt_pin).

v2: s/i915_gem_ggtt_pin/i915_gem_obj_ggtt_pin
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Do to the move active/inactive lists, it no longer makes sense to use
them for shrinking, since shrinking isn't VM specific (such a need may
also exist, but doesn't yet).

What we can do instead is use the global bound list to find all objects
which aren't active.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Earlier in the conversion sequence we attempted to quickly wedge in the
transitional interface as static inlines.

Now that we're sure these interfaces are sane, for easier debug and to
decrease code size (since many of these functions may be called quite a
bit), make them real functions

While at it, kill off the set_color interface. We'll always have the
VMA, or easily get to it.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With an upcoming change to bind, to make checkpatch happy and keep the
code clean, we need to rework this code a bit.

This should have no functional impact.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
[danvet: Add the newline Chris requested.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move all the similar address space (VM) initialization code to one
function. Until we have multiple VMs, there should only ever be 1 VM.
The aliasing ppgtt is a special case without it's own VM (since it
doesn't need it's own address space management).
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The default LLC age was changed:
commit 0d8ff15e
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Thu Jul 4 11:02:03 2013 -0700

drm/i915/hsw: Set correct Haswell PTE encodings.

On the surface it would seem setting a default age wouldn't matter
because all GEM BOs are aged similarly, so the order in which objects
are evicted would not be subject to aging. The current working theory as
to why this caused a regression though is that LLC is a bit special in
that it is shared with the CPU. Presumably (not verified) the CPU
fetches cachelines with age 3, and therefore recently cached GPU objects
would be evicted before similar CPU object first when the LLC is full.
It stands to reason therefore that this would negatively impact CPU
bound benchmarks - but those seem to be low on the priority list.

eLLC OTOH does not have this same property as LLC. It should be used
entirely for the GPU, and so the age really shouldn't matter.
Furthermore, we have no evidence to suggest one is better than another
on eLLC. Since we've never properly supported eLLC before no, there
should be no regression. If the GPU client really wants "younger"
objects, they should use MOCS.

v2: Drop the extra #define (Chad)

v3: Actually git add

v4: Pimped commit message

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67062Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NChad Versace <chad.versace@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since commit 29a241cc (ACPICA: Add argument typechecking for all
predefined ACPI names), _DSM parameters are validated which trigger the
following warning:

    ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
    ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
    ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)
    ACPI Warning: \_SB_.PCI0.P0P2.PEGP._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130517/nsarguments-95)

As the Intel _DSM method seems to ignore this parameter, let's comply to
the ACPI spec and use a Package instead.
Signed-off-by: NPeter Wu <lekensteyn@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=32602Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Userspace can pass a mode with an unspecified vsync/hsync polarity
setting. All encoders in the Intel driver take this to mean a negative
polarity setting. The HW readout/state checker code on the other hand
needs these flags to be explicitly set, otherwise the state checker will
WARN about the mismatch.

Get rid of the WARN by making the polarity setting explicit in the
adjusted mode flags based on the requested mode flags. This will keep
the existing behavior otherwise.

Note that we could guess from the other timing parameters whether the
user wanted a VESA or other standard mode and set the polarity
accordingly. This is what the NV driver does
(drivers/gpu/drm/nouveau/dispnv04/crtc.c), but I think that's not very
exact and would change the existing behavior of the Intel driver.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65442Signed-off-by: NImre Deak <imre.deak@intel.com>
Tested-by: Ncancan,feng <cancan.feng@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

VLV wants encoder enabling before the pipe is up. With the previously
rearranged VLV DP and HDMI ->pre_enable and ->enable callbacks in place,
this no longer depends on the early ->enable hook call. Move the
->enable call at the end of the sequence, similar to the crtc enable on
other platforms. This will be needed e.g. for moving the eDP backlight
enabling to the right place in the sequence, currently done too early on
VLV.

There should be no functional changes.

v2: Rebase.

v3: Explain why this is needed in the commit message (Chris).
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

VLV wants encoder enabling before the pipe is up. This is currently
achieved through calling the ->enable callback early, right after the
->pre_enable callback, in valleyview_crtc_enable(). This loses both the
distinction between ->pre_enable and ->enable on VLV and the possibility
to use a hook at the end of the modeset sequence.

Rearrange the HDMI callbacks to make it possible to move ->enable call
later. Basically do everything in ->pre_enable on VLV, and make ->enable
a NOP.

There should be no functional changes.

v2: Rebase.

v3: Explain why this is needed in the commit message (Chris).
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

VLV wants encoder enabling before the pipe is up. This is currently
achieved through calling the ->enable callback early, right after the
->pre_enable callback, in valleyview_crtc_enable(). This loses both the
distinction between ->pre_enable and ->enable on VLV and the possibility
to use a hook at the end of the modeset sequence.

Rearrange the DP callbacks to make it possible to move ->enable call
later. Basically do everything in ->pre_enable on VLV, and make ->enable
a NOP.

There should be no functional changes.

v2: Rebase.

v3: Explain why this is needed in the commit message (Chris).
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise we get flooded by the kernel warning us that we are doing
long sequences of IO without serialisation. For example,

 WARNING: CPU: 0 PID: 11136 at drivers/gpu/drm/i915/intel_sideband.c:40 vlv_sideband_rw+0x48/0x1ef()
 Modules linked in:
 CPU: 0 PID: 11136 Comm: kworker/u2:0 Tainted: G        W    3.11.0-rc2+ #4
 Call Trace:
  [<c2028564>] ?  warn_slowpath_common+0x63/0x78
  [<c227ad43>] ?  vlv_sideband_rw+0x48/0x1ef
  [<c20285dd>] ?  warn_slowpath_null+0xf/0x13
  [<c227ad43>] ?  vlv_sideband_rw+0x48/0x1ef
  [<c227b060>] ?  vlv_dpio_write+0x1c/0x21
  [<c2262b3b>] ?  intel_dp_set_signal_levels+0x24a/0x385
  [<c2264909>] ?  intel_dp_complete_link_train+0x25/0x1d1
  [<c2264c55>] ?  intel_dp_check_link_status+0xf7/0x106
  [<c2238ced>] ?  i915_hotplug_work_func+0x17b/0x221
  [<c203a204>] ?  process_one_work+0x12e/0x210
  [<c203a5e4>] ?  worker_thread+0x116/0x1ad
  [<c203a4ce>] ?  rescuer_thread+0x1cb/0x1cb
  [<c203d8f5>] ?  kthread+0x67/0x6c
  [<c2457ebb>] ?  ret_from_kernel_thread+0x1b/0x30
  [<c203d88e>] ?  init_completion+0x18/0x18

v2: Retire the locking in vlv_crtc_enable() and do it close to the meat.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
[danvet: Squash in a s/mutex_lock/mutex_unlock/ fixup spotted by the 0
day kernel build/coccinelle and reported by Dan Carpenter.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Art confirms that this should work fine.  Since most panels are 18bpp
with dithering from 24bpp, the existing code wouldn't be enabled in most
cases.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

SNB and IVB have slightly a different way to read out the
watermark latency values.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The LP1+ watermark latency values need to be multiplied by 5 to
make them suitable for watermark calculations. However on pre-HSW
platforms we're going to need the raw value later when we have to
write it to the WM_LPn registers' latency field. So delay the
multiplication until it's needed.

Note: Paulo complains that the units of wm (now in 100ns) aren't
really clear and I agree. But that can be fixed later on ...
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Add a comment about the unit obfuscation.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move parsing of MCH_SSKPD to a separate function, we'll add other
platforms there later.

Note: Chris spotted an empty struct initializer and wondered whether
that is hiding a compilier warning. Ville explained that it should
have been part of the patch that extends this function to snb/ivb,
which don't have all levels hsw has. I've figured it's ok to keep it
here with a small note.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Add note about the ominous struct initializer.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The latency values fit in uint16_t, so let's save a few bytes.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The FBC watermark doesn't depend on the latency value, so no point in
passing it in.

Note: It actually depends upon the latency, but only through priv_val
...
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Add review comment from Paulo to the commit message.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These functions are appropriate for everything since ILK.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

hsw_wm_get_pixel_rate() isn't specific to HSW. In fact it should be made
to handle all gens, but for now it depends on the PCH panel fitter
state, so give it an ilk_ prefix.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Using the destination width in the sprite WM calculations isn't correct.
We should be using the source width.

Note: This doesn't affect hsw since it does not support sprite
scaling.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Add review note from Paulo to the commit message.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Don't subtract one from the sprite width before watermark calculations.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For calculating watermarks we want to know whether sprites are
scaled. Pass that information to update_sprite_watermarks() so that
eventually we may do some watermark pre-computing.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Some of our macros we trying to convert from an drm_device to a
drm_i915_private and then use the pointer inline. This is not only
cumbersome but prone to error. Replacing it with a typesafe function
should help catch those errors in future.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
[danvet: Squash in fixup to correctly order static vs. inline
qualifiers, static comes first. Also fix up another offender.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NStéphane Marchesin <marcheu@chromium.org>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The PTE layouts are the same for both ppgtt and gtt, so we can simplify
the setup for ppgtt by copying the encoding function pointer from gtt.
This prevents bugs where we update one function pointer, but forget the
other.

For instance,

commit 4d15c145
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Thu Jul 4 11:02:06 2013 -0700

    drm/i915: Use eLLC/LLC by default when available

only extends the gtt to use eLLC/LLC cacheing and forgets to also update
the ppgtt function pointer.

v2: Actually mention the bug being fixed (Kenneth)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Almost invariably the reason why FBC cannot be turned on is the same
every time (disabled via parameter, too many pipes, pipe too large etc)
as modesetting and framebuffer configuration changes less frequently
than trying to enable FBC.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In the old days of the crtc helpers we've only had the encoder and
crtc ->mode_fixup callbacks. So when the lvds connector wanted to
adjust the crtc timings it had to set a driver-private mode flag to
tell the crtc mode fixup code to not overwrite them with the generic
ones.

When converting things to the new infrastructure I've kept the entire
logic and only moved the flag to pipe_config->timings_set. But this
logic is pretty tricky and already caused regressions:

commit 21d8a475
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri Jul 12 08:07:30 2013 +0200

    drm/i915: fix pfit regression for non-autoscaled resolutions

So take advantage of the flexibility our own modeset infrastructure
affords us and prefill default crtc timings. This allows us to rip out
->timings_set. Note that we overwrite things again when retrying the
pipe config computation due to bandwidth constraints to avoid bogus
crtc timings if the encoder only does relative adjustments (which is
how the pfit code works). Only a theoretical concern though since
platforms where we retry (pch-split platforms) do not need
adjustements (since only the old gmch pfit needs that). But let's
better be safe than sorry.

Since we now initialize the crtc timings before calling the
encoder->compute_config functions the crtc initialization in the gmch
pfit code is now redudant and so can be removed.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Add a paragraph to the commit message to explain why we can
ditch the crtc timings initialization call from the gmch pfit code, to
answer a question from Rodrigo's review.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The encoder->mode_set callback from the crtc helpers is now completely
unused in our driver. Good riddance!
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Same conversion as for hdmi/dp.
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Does nothing, so trivial conversion. But update the outdated comment
while at it.
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Usual drill applies. Again I've not switched the upcast helpers to use
intel_encoder instead of drm_encoder since that's much more invasive
and will change also the hdmi and ddi encoders.
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>