- 22 8月, 2006 1 次提交
-
-
由 Christian Merkle 提交于
According to drivers/video/intelfb/intelfb.h, the intelfb driver supportes the following devices: 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM. So the description in drivers/video/Kconfig and the documentation in Documentation/fb/intelfb.txt is outdated. airlied: cleaned up some other obvious mistakes in intelfb.txt. Signed-off-by: NChristian Merkle <mail@christian-merkle.de> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
- 15 8月, 2006 1 次提交
-
-
由 Edgar Hucek 提交于
Add basic Machine detection to imacfb and some Ducumentation bits for imacfb. Signed-off-by: NEdgar Hucek <hostmaster@ed-soft.at> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 01 8月, 2006 3 次提交
-
-
由 Michael Hanselmann 提交于
This patch fixes several problems: - The legacy backlight value might be set at interrupt time. Introduced a worker to prevent it from directly calling the backlight code. - via-pmu allows the backlight to be grabbed, in which case we need to prevent other kernel code from changing the brightness. - Don't send PMU requests in via-pmu-backlight when the machine is about to sleep or waking up. - More Kconfig fixes. Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
The backlight and lcd subsystems can be notified by the framebuffer layer of blanking events. However, these subsystems, as a whole, can function independently from the framebuffer layer. But in order to enable to the lcd and backlight subsystems, the framebuffer has to be compiled also, effectively sucking in a huge amount of unneeded code. To prevent dependency problems, separate out the framebuffer notification mechanism from the framebuffer layer and permanently link it to the kernel. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Hering 提交于
Hide the video drivers for onboard graphics found in early PCI PowerMacs in Apple G5 config files. drivers/built-in.o: In function `.platinumfb_probe': platinumfb.c:(.text+0x377a0): undefined reference to `.nvram_read_byte' platinumfb.c:(.text+0x37830): undefined reference to `.nvram_read_byte' drivers/built-in.o: In function `.control_init': controlfb.c:(.init.text+0x1938): undefined reference to `.nvram_read_byte' controlfb.c:(.init.text+0x1968): undefined reference to `.nvram_read_byte' drivers/built-in.o: In function `.valkyriefb_init': (.init.text+0x2300): undefined reference to `.nvram_read_byte' drivers/built-in.o:(.init.text+0x239c): more undefined references to `.nvram_read_byte' follow Signed-off-by: NOlaf Hering <olh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 7月, 2006 1 次提交
-
-
由 Mike Rapoport 提交于
Add frame buffer driver for the 2700G LCD controller present on CompuLab CM-X270 computer module. [adaplas] - Add more informative help text to Kconfig - Make DEBUG a Kconfig option as FB_MBX_DEBUG - Remove #include mbxdebug.c, this is frowned upon - Remove redundant casts - Arrange #include's alphabetically - Trivial whitespace Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 7月, 2006 1 次提交
-
-
由 Vitaly Wool 提交于
Add support for Display Update Module and RGB framebuffer device on Philips PNX4008 ARM board. Signed-off-by: NGrigory Tolstolytkin <gtolstolytkin@ru.mvista.com> Signed-off-by: NVitaly Wool <vitalywool@gmail.com> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 03 7月, 2006 1 次提交
-
-
由 Dennis Munsie 提交于
[07/07] intelfb: adds an option to enable I2C support in the intelfb driver. Also adds the intel_i2c.c file to the Makefile. Signed-off-by: NDennis Munsie <dmunsie@cecropia.com>
-
- 27 6月, 2006 3 次提交
-
-
由 Edgar Hucek 提交于
This patch adds a new framebuffer driver for the Intel Based macs. This framebuffer is needed when booting from EFI to get something out the box. [akpm: note: doesn't support modular building] [akpm@osdl.org: cleanups] Signed-off-by: NEdgar Hucek <hostmaster@ed-soft.at> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
- make firmware edid independent from framebuffer (No need to choose framebuffer just to disable this option - enable this option in X86_64 - check if VBE/DDC function is implemented before calling actual function Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
We had three (sic) VIDEO_SELECT options: - two in drivers/video/Kconfig - one in drivers/video/console/Kconfig This patch removes the two options in drivers/video/Kconfig and also removes the unneeded usage in drivers/video/sis/sis_main.c . Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 6月, 2006 1 次提交
-
-
由 Michael Hanselmann 提交于
This patch contains a total rewrite of the backlight infrastructure for portable Apple computers. Backward compatibility is retained. A sysfs interface allows userland to control the brightness with more steps than before. Userland is allowed to upload a brightness curve for different monitors, similar to Mac OS X. [akpm@osdl.org: add needed exports] Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 18 6月, 2006 1 次提交
-
-
由 Marc Singer 提交于
Patch from Marc Singer Board support and LCD panel configurations to integrate lh7a40x's with the amba clcd driver. Signed-off-by: NMarc Singer <elf@buici.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 28 4月, 2006 1 次提交
-
-
由 Antonino A. Daplas 提交于
Add help text in Kconfig Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 4月, 2006 1 次提交
-
-
由 Andrew Morton 提交于
Heaps of build errors - disable it to keep sparc32 allmodconfig happy. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 03 4月, 2006 1 次提交
-
-
由 Dave Airlie 提交于
i945G chipsets supports 64-bit. Signed-off-by: NDave Airlie <airlied@linux.ie>
-
- 01 4月, 2006 1 次提交
-
-
由 Michael Hanselmann 提交于
This patch removes the old radeon driver which has been replaced by a newer one. Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 3月, 2006 2 次提交
-
-
由 Antonino A. Daplas 提交于
DDC reading via the Video BIOS may take several tens of seconds with some combination of display cards and monitors. Make this option configurable. It defaults to `y' to minimise disruption. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ralf Baechle 提交于
Add support for Alchemy Au1200 framebuffer driver Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 3月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
This patch removes a dead Radeon URL from two Kconfig files. This isue was noted by Reto Gantenbein <ganto82@gmx.ch> in Kernel Bugzilla #4446. Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 25 2月, 2006 1 次提交
-
-
由 Martin Michlmayr 提交于
Allocating more than 4 MB memory for the GBE (SGI O2) framebuffer completely breakfs gbefb support at the moment. According to comments on #mipslinux, more than 4 MB has never worked correctly in Linux. Therefore, the default should be 4 MB. Signed-off-by: NMartin Michlmayr <tbm@cyrius.com> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 2月, 2006 1 次提交
-
-
由 Adrian Bunk 提交于
The BUS_I2C option is neither available (since there is no VISWS option in the kernel) nor does it have any effect - so why not remove it? Based on a report by Jean-Luc Leger <reiga@dspnet.fr.eu.org>. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 1月, 2006 2 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
CONFIG_ATYFB_XL_INIT option is broken for a long time. It will always cause a kernel hang. Since no one has fixed this problem for some time now, remove it from atyfb. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 1月, 2006 1 次提交
-
-
由 Knut Petersen 提交于
This is a major update to the cyblafb framebuffer driver. Most of the stuff has been tested in the mm tree. Main advantages: ============ - vxres > xres support - ywrap and xpan support - much faster for almost all modes (e.g. 1280x1024-16bpp draws more than 41 full screens of text instead of about 25 full screens of text per second on authors Epia 5000) - module init/exit code fixed - bugs triggered by console rotation fixed - lots of minor improvements - startup modes suitable for high performance scrolling in all directions This diff also contains a lot of white space fixes. No side effects are possible, only one single graphics core is affected. Signed-off-by: NKnut Petersen <Knut_Petersen@t-online.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 12月, 2005 1 次提交
-
-
由 Adrian Bunk 提交于
Introduce a Kconfig symbol SPARC that is defined on both the sparc and sparc64 architectures. This symbol makes some dependencies more readable. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 11月, 2005 1 次提交
-
-
由 Mark Fortescue 提交于
A cut and past error regarding the CG3 frame buffer needs to be fixed. It also affects Creator/Creator3D/Elite3D. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 11月, 2005 1 次提交
-
-
由 Ralf Baechle 提交于
Delete leftovers of the FB_E1356 and anything that did depend on it. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 11月, 2005 4 次提交
-
-
由 Antonino A. Daplas 提交于
According to Jon Smirl, filling in the field fb_cursor with soft_cursor for drivers that do not support hardware cursors is redundant. The soft_cursor function is usable by all drivers because it is just a wrapper around fb_imageblit. And because soft_cursor is an fbcon-specific hook, the file is moved to the console directory. Thus, drivers that do not support hardware cursors can leave the fb_cursor field blank. For drivers that do, they can fill up this field with their own version. The end result is a smaller code size. And if the framebuffer console is not loaded, module/kernel size is also reduced because the soft_cursor module will also not be loaded. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
This patch fixes nvifiafb mode setting code to be closer to what the X driver does, which actually makes it work on the 5200FX I have access to. It also fix the routine that gets the EDID from Open Firmware on PPC, it was broken in various ways and would crash at boot. Compared to the patch I posted to linux-fbdev last week, this one just changes a printk to be closer to the other ones in the driver. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@hotpop.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Arrange frame buffer menu: - puts all Epson drivers together - removes split of FB_PXA and FB_PXA_PARAMETERS by FB_W100 - results in PXA, W100, Epson, S3C2410, & Virtual FB drivers being presented at the same menu level as all other FB drivers Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Acked-by: N"Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy.Dunlap 提交于
Frame buffer driver help text changes: - Move S3 Trio next to S3 Savage; - add or clarify help text for several FB drivers; - add help text for FB console; - add help text for bootup logos; Acked-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 31 10月, 2005 1 次提交
-
-
由 Brian Gerst 提交于
Add CONFIG_X86_32 for i386. This allows selecting options that only apply to 32-bit systems. (X86 && !X86_64) becomes X86_32 (X86 || X86_64) becomes X86 Signed-off-by: NBrian Gerst <bgerst@didntduck.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 10月, 2005 1 次提交
-
-
由 Maciej W. Rozycki 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 29 9月, 2005 1 次提交
-
-
由 Antonino A. Daplas 提交于
- Workaround for the ioremap patch that produces a blank display on some chipsets - Make hwcursor = 0 the default. The hardware cursor does not work with all hardware. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 9月, 2005 1 次提交
-
-
由 Antonino A. Daplas 提交于
A recent change in nvidiafb caused nvidiafb_cursor to always return -ENXIO instead of using the soft_cursor. This will happen if the parameter "hwcur" is not set, which happens to be the default. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 9月, 2005 1 次提交
-
-
由 Antonino A. Daplas 提交于
Fix compile error if CONFIG_FB_I810_I2C is 'y' and CONFIG_I2C = 'm'. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 10 9月, 2005 3 次提交
-
-
由 Arnaud Patard 提交于
This set of two patches add support for the framebuffer of the Samsung S3C2410 ARM SoC. This driver was started about one year ago and is now used on iPAQ h1930/h1940, Acer n30 and probably other s3c2410-based machines I'm not aware of. I've also heard yesterday that it's working also on iPAQ rx3715/rx3115 (s3c2440-based machines). Signed-Off-By: NArnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NBen Dooks <ben@trinity.fluff.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Add ddc/i2c support for i810fb. This will allow the driver to get display information, especially for monitors with fickle timings. The i2c support depends on CONFIG_FB_I810_GTF. Changed __init* to __devinit* Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAlexander Nyberg <alexn@telia.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Knut Petersen 提交于
This is a framebuffer driver for the Cyberblade/i1 graphics core. Currently tridenfb claims to support the cyberblade/i1 graphics core. This is of very limited truth. Even vesafb is faster and provides more working modes and a much better quality of the video signal. There is a great number of bugs in tridentfb ... but most often it is impossible to decide if these bugs are real bugs or if fixing them for the cyberblade/i1 core would break support for one of the other supported chips. Tridentfb seems to be unmaintained,and documentation for most of the supported chips is not available. So "fixing" cyberblade/i1 support inside of tridentfb was not an option, it would have caused numerous if(CYBERBLADEi1) else ... cases and would have rendered the code to be almost unmaintainable. A first version of this driver was published on 2005-07-31. A fix for a bug reported by Jochen Hein was integrated as well as some changes requested by Antonino A. Daplas. A message has been added to tridentfb to inform current users of tridentfb to switch to cyblafb if the cyberblade/i1 graphics core is detected. This patch is one logical change, but because of the included documentation it is bigger than 70kb. Therefore it is not sent to lkml and linux-fbdev-devel, Signed-off-by: NKnut Petersen <Knut_Petersen@t-online.de> Cc: Muli Ben-Yehuda <mulix@mulix.org> Acked-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-