This patch adds support for MSI/MSI-X feature to the driver.  It is
a runtime parameter(for now, loadable parameter).  Default is INTA.

Patch has been tested on IA64 platform with Xframe II adapter,
both of which support MSI-X feature.  An improvement of about 7%
in throughput(both Tx and Rx) was observed and a reduction by 7%
in CPU utilization during Tx test.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

drivers/net/s2io.c: In function `init_shared_mem':
drivers/net/s2io.c:431: warning: cast from pointer to integer of different size
drivers/net/s2io.c: In function `free_shared_mem':
drivers/net/s2io.c:662: warning: cast from pointer to integer of different size

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

u64 is not uintptr_t; unsigned long is...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Hi,
This patch contains the following hardware related fixes and other
miscellaneous bug fixes.

1. Updated the definition of single and double-bit ECC errors
2. Earlier we were allocating Transmit descriptors equal to
   MAX_SKB_FRAGS. This was causing a boundary condition failure.
   Need to allocate MAX_SKB_FRAGS+1 descriptors.
3. On some platforms(like PPC), pci_alloc_consistent() can return
   a zero DMA address. Since the NIC cannot handle zero-addresses,
   a workaround has been provided. Basically, we don't use such
   that page. We reallocate.
4. If list_info allocation failed during driver load, check for
   it during driver exit and return instead of trying to dereference
   NULL pointer.
5. Increase the debug level of few non-critical debug messages.
6. Reset the card on critical ECC double errors only in case of
   XframeI since XframeII can recover from such errors.
7. Print copyright message on driver load.
8. Bumped up the driver version no. to 2.0.8.1
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,

Patch Description:
This patch incorporates the following hardware fixes required
for Xframe II adapter.
1. New values to program the dtx_control register.
2. Disable memory controller interrupts(MC_INTR) since these
   are now monitored thru' a poll routine.
3. Don't reset an XframeII card on an ECC double-bit error(It
   can recover).
4. Save/restore PCI config space before/after a reset irrespective
   of Xframe I or II card.
5. Bumped up the driver version no. to 2.0.3.1

Please review the patch and apply the same if it looks ok.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
This is a patch to incorporate comments from earlier 12 patches.
It also fixes a few issues we found during this time.
Following is a list of changes in this patch. Item 1 incorporates
earlier comments. Issues addressed in items 2 to 4 were discovered
recently.

1. wmb() call in s2io_xmit() replaced with mmiowb().
2. The dtx_control register was earlier programmed incorrectly
   for Xframe II adapter.
3. As suggested by hardware team, after a reset, in case of
   Xframe II adapter, we clear certain spurious errors by
   clearing PCI-X ECC status register, "detected parity error"
   bit in PCI_STATUS register and PCI_STATUS bit in txpic_int register.
4. On IBM PPC platforms, we found that in the Rx buffer replenish
   function, two memory writes(one to the the descriptor length and
   another to the ownership) were getting reordered. This was causing
   the adapter to see the ownership transfered to it before the length
   was updated.

   One solution was to add a wmb() but since this would turnout expensive
   on some platforms if called for every descriptor, we set the ownership
   bit and other fields of '2' to 'N' Rx descriptors followed by a wmb()
   and then set the ownership of first descriptor ('1').

   Here the value 'N' is configurable by making it a module loadable
   parameter (rxsync_frequency).
   (NOTE: This parameter is a power of 2).
5. Bumped up the driver version no. to 2.0.2.1
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
The last patch in this series fixes the following issues found during
testing.
1. Ensure we don't pass zero sized buffers to the card(which can lockup)
2. Restore the PCI-X parameters(in case of Xframe I adapter) after a reset.
3. Make sure total size of all FIFOs does not exceed 8192.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
The below patch implements a new "Link state change handling"
scheme supported by the Xframe II adapter. It also bumps up the
driver version to 2.0.2.0.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
This is a patch to provide bimodal interrupt moderation support for
Xframe II adapter. Basically, in this moderation scheme, the adapter
raises a traffic interrupt if the no. of packets transmitted and/or
received reaches a programmable threshold.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
This patch provides basic support for the Xframe II adapter.
Includes the following changes:
1. New values to program XAUI interface.
2. Print the PCI/PCI-X mode(bus frequency, width).
3. Remove EOI from reset during intialization.
4. Enable all 8 PCCs if Xframe II adapter.
5. Programs the RLDRAM size depending on the device.
(Note: RLDRAM size on XFARME-I is 64Mb whereas on XFRAME-II it's 32 Mb).
6. Enable extended(64-bit) statistics counters.
7. Program timer interrupt duration based on PCI/PCI-X clock speed.
8. Not required to save/restore PCI config space before/after reset.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
Patch below adds VLAN support to the driver.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
This patch implements the slow-path handling functions(link
state change, hardware errors) as a timer. It is not
handled in interrupt handler as was done previously.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
Patch below supports MTU change on-the-fly(without bringing interface
down)
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
This patch relates to mostly performance related changes.
1. Fixed incorrect computation of PANIC level in rx_buffer_level().
2. Removed unnecessary PIOs(read/write of tx_traffic_int and
   rx_traffic_int) from interrupt handler and removed read of
   general_int_status register from xmit routine.
3. Enable two-buffer mode(for Rx path) automatically for SGI
   systems. This improves Rx performance dramatically on
   SGI systems.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
This patch fixes certain memory leaks discovered in free_tx_buffers()
and rx_osm_handler()
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
Below patch includes fixes for few purely software bugs identified
since last release.
1. Keep track and display(as part of ethtool command output) the no.
   of single-bit and double-bit ECC errors.
2. Handle race condition between intr handler and "interface down"
   routine.
3. Initial link state setting modified so that the link state displayed
   after "interface Up" is correct.
4. Fix for "Incorrect Tx packet count when TSO is enabled".
5. Disable periodic DMA of statistics and schedule one-shot DMA
   only when required.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
Below patch addresses few h/w specific issues.
1. Check for additional ownership bit on Rx path before
   starting Rx processing.
2. Enable only 4 PCCs(Per Context Controller) for Xframe I
   revisions less than 4.
3. Program Rx and Tx round robin registers depending on
   no. of rings/FIFOs.
4. Tx continous interrupts is now a loadable parameter.
5. Reset the card if we get double-bit ECC errors.
6. A soft reset of XGXS being done to force a link state change has been
   eliminated.
7. After a reset, clear "parity error detected" bit,
   PCI-X ECC status register, and PCI_STATUS bit in
   tx_pic_int register.
8. The error in the disabling allmulticast implementation has been
   rectified.
9. Leave the PCI-X parameters MMRBC, OST etc. at their
   BIOS/system defaults.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
We are submitting a series of 13 patches to support our Xframe I and
Xframe II line of products. The patches can be categorized as follows:

Patches 1-8 : Changes applicable to both Xframe I and II
Patches 9-11: Xframe II specific features
Patch 12: Addresses issues found during testing cycle.
Patch 13: Incorpoates mostly the review comments from community
	and some last moment bug fixes.

Please review the patches and let us know your comments.

Starting with patch 1 below.
This patch involves cosmetic changes(tabs and indentation,
regrouping of transmit and receive data structures, typecasting,
code cleanup).
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Many drivers use skb->tail unnecessarily.

In these situations, the code roughly looks like:

	dev = dev_alloc_skb(...);

	[optional] skb_reserve(skb, ...);

	... skb->tail ...

But even if the skb_reserve() happens, skb->data equals
skb->tail.  So it doesn't make any sense to use anything
other than skb->data in these cases.

Another case was the s2io.c driver directly mucking with
the skb->data and skb->tail pointers.  It really just wanted
to do an skb_reserve(), so that's what the code was changed
to do instead.

Another reason I'm making this change as it allows some SKB
cleanups I have planned simpler to merge.  In those cleanups,
skb->head, skb->tail, and skb->end pointers are removed, and
replaced with skb->head_room and skb->tail_room integers.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NJeff Garzik <jgarzik@pobox.com>

Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling
pci_set_dma_mask() or pci_set_consistent_dma_mask()

This patch includes dma-mapping.h explicitly because it caused errors
on some architectures otherwise.

See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details
Signed-off-by: NTobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: NDomen Puncer <domen@coderock.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!