Convert printks to use dev_printk().
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Convert printks to use dev_printk().

I converted pr_debug() to dev_dbg().  Both use KERN_DEBUG and are enabled
only when DEBUG is defined.

I converted printk(KERN_DEBUG) to dev_printk(KERN_DEBUG), not to dev_dbg(),
because dev_dbg() is only enabled when DEBUG is defined.

I converted DBG(KERN_INFO) (only in setup-bus.c) to dev_info().  The DBG()
name makes it sound like debug, but it's been enabled forever, so dev_info()
preserves the previous behavior.

I tried to make the resource assignment formats more consistent, e.g.,
  "BAR %d: got res [%#llx-%#llx] bus [%#llx-%#llx] flags %#lx\n"
instead of sometimes using "start-end" and sometimes using "size@start".
I'm not attached to one or the other; I'd just like them consistent.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The pcie_poll_cmd() and pcie_wait_cmd() are too large to be
inlined.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Change command polling frequency to 100Hz from 10Hz in order to reduce
the delay in the common case of a command completing quickly.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Cleanup pcie_poll_cmd(): check the slot status once before entering our
completion test loop and convert the loop to a simpler while() block.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Fix the typo in hpc_release_ctlr().
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

A few warnings snuck in as parameters were added or renamed.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

On x86, we do early PCI probing to apply some quirks for chipset bugs.
However, in a recent cleanup (7bcbc78d) a
thinko was introduced that causes us to probe all subfunctions of even single
function devices (a function was factored out of an inner loop and a "break"
became a "return").  Fix that up by making check_dev_quirk() return a value so
we can keep the factored code intact.
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

ACPI PM: Add possibility to change suspend sequence

There are some systems out there that don't work correctly with
our current suspend/hibernation code ordering.  Provide a workaround
for these systems allowing them to pass 'acpi_sleep=old_ordering' in
the kernel command line so that it will use the pre-ACPI 2.0 ("old")
suspend code ordering.

Unfortunately, this requires us to add a platform hook to the
resuming of devices for recovering the platform in case one of the
device drivers' .suspend() routines returns error code.  Namely,
ACPI 1.0 specifies that _PTS should be called before suspending
devices, but _WAK still should be called before resuming them in
order to undo the changes made by _PTS.  However, if there is an
error during suspending devices, they are automatically resumed
without returning control to the PM core, so the _WAK has to be
called from within device_resume() in that cases.

The patch also reorders and refactors the ACPI suspend/hibernation
code to avoid duplication as far as reasonably possible.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Merge branch 'suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 into linux-next

Remove the obsolete workaround for a Toshiba Satellite 4030cdt
S1 problem from drivers/acpi/sleep/main.c .
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NLen Brown <len.brown@intel.com>

Since the second argument of acpi_pci_choose_state() and
platform_pci_choose_state() is never used, remove it.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NLen Brown <len.brown@intel.com>

Get rid of a superfluous acpi_pm_device_sleep_state() parameter.  The
only legitimate value of that parameter must be derived from the first
parameter, which is what all the callers already do.  (However, this
does not address the fact that ACPI still doesn't set up those flags.)
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NLen Brown <len.brown@intel.com>

Detect all physical PCI slots as described by ACPI, and create entries in
/sys/bus/pci/slots/.

Not all physical slots are hotpluggable, and the acpiphp module does not
detect them.  Now we know the physical PCI geography of our system, without
caring about hotplug.

[kaneshige.kenji@jp.fujitsu.com: export-kobject_rename-for-pci_hotplug_core]
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: NGreg KH <greg@kroah.com>
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: fix build with CONFIG_DMI=n]
Signed-off-by: NAlex Chiang <achiang@hp.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Len Brown <lenb@kernel.org>
Acked-by: NLen Brown <len.brown@intel.com>
Acked-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Currently, /sys/bus/pci/slots/ only exposes hotplug attributes when a
hotplug driver is loaded, but PCI slots have attributes such as address,
speed, width, etc.  that are not related to hotplug at all.

Introduce pci_slot as the primary data structure and kobject model.
Hotplug attributes described in hotplug_slot become a secondary
structure associated with the pci_slot.

This patch only creates the infrastructure that allows the separation of
PCI slot attributes and hotplug attributes.  In this patch, the PCI
hotplug core remains the only user of this infrastructure, and thus,
/sys/bus/pci/slots/ will still only become populated when a hotplug
driver is loaded.

A later patch in this series will add a second user of this new
infrastructure and demonstrate splitting the task of exposing pci_slot
attributes from hotplug_slot attributes.

  - Make pci_slot the primary sysfs entity. hotplug_slot becomes a
    subsidiary structure.
    o pci_create_slot() creates and registers a slot with the PCI core
    o pci_slot_add_hotplug() gives it hotplug capability

  - Change the prototype of pci_hp_register() to take the bus and
    slot number (on parent bus) as parameters.

  - Remove all the ->get_address methods since this functionality is
    now handled by pci_slot directly.

[achiang@hp.com: rpaphp-correctly-pci_hp_register-for-empty-pci-slots]
Tested-by: NBadari Pulavarty <pbadari@us.ibm.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: make headers_check happy]
[akpm@linux-foundation.org: nuther build fix]
[akpm@linux-foundation.org: fix typo in #include]
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Cc: Greg KH <greg@kroah.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Len Brown <lenb@kernel.org>
Acked-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Register one slot per slot, rather than one slot per function.  Change the
name of the slot to fake%d instead of the pci address.
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Cc: Greg KH <greg@kroah.com>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Just concentrate PCI traffic at linux-pci@vger rather than splitting it between
vger and a sf.net moderated (!) mailing list.
Acked-by: NMatthew Wilcox <willy@linux.intel.com>
Acked-by: NScott Murray <scottm@somanetworks.com>
Acked-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  fix BLK_DEV_HD_ONLY on ARM dependencies
  ide: export ide_doubler
  palm_bk3710: add warm-plug support
  delkin_cb: add missing __init/__exit tags
  delkin_cb: add warm-plug support
  delkin_cb: use struct ide_port_info
  delkin_cb: set proper hwif->gendev.parent value
  ide: fix host drivers missing hwif->chipset initialization
  ide-generic: add missing hwif->chipset setup
  sis5513: add missing pci_enable_device() call
  MAINTAINERS: remove SIS 5513 IDE entry
  ide: remove the ide_etrax100 chipset type

This patch unhides the SMBus on Compaq Deskpro EN
SFF P667 with the Intel 815E chipset. Unhiding it reveals
a THMC51 hardware monitoring chip.

Jean Delvare has checked that this machine has no ACPI
magic touching the SMBus nor the hardware monitoring chip,
so this should be safe.

The patch was tested on Fedora Core 9 with 2.6.25.4 kernel.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Tested-by: NRafał Haładuda <rh1985@wp.pl>
CC: Jean Delvare <khali@linux-fr.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch limits BLK_DEV_HD_ONLY to the ARM platforms offering 
IRQ_HARDDISK, fixing the following compile error on others:

<--  snip  -->

...
  CC      drivers/ide/legacy/hd.o
...
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'hd_times_out':
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: 'IRQ_HARDDISK' undeclared (first use in this function)
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: (Each undeclared identifier is reported only once
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: for each function it appears in.)
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'do_hd_request':
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:661: error: 'IRQ_HARDDISK' undeclared (first use in this function)
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'hd_init':
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:765: error: 'IRQ_HARDDISK' undeclared (first use in this function)
make[3]: *** [drivers/ide/legacy/hd.o] Error 1

<--  snip  -->
Reported-by: NAdrian Bunk <bunk@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This patch fixes the following build error:

<--  snip  -->

...
  Building modules, stage 2.
  MODPOST 1204 modules
ERROR: "ide_doubler" [drivers/ide/ide-core.ko] undefined!
...
make[2]: *** [__modpost] Error 1

<--  snip  -->
Reported-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Don't fail the probe if there are no devices attached to the controller.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Don't fail the probe if there are no devices attached to the controller.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Convert the driver to use struct ide_port_info - as a nice side-effect
this fixes racy setup of ->io_32bit/unmask settings (after ide_device_add()
call device can be already in use).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

hwif->dev was set too late (after ide_device_add() call)
so hwif->gendev.parent was not initialized properly.

Fix it by setting hw.dev and letting ide_init_port_hw()
do the rest.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_find_port() now depends on ->chipset being set for occupied ide_hwifs[]
slots so all host drivers have to initialize hwif->chipset properly.

This patch fixes a regression on hosts with > 1 port or with a single port
but no devices attached to it for an affected host drivers.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

hwif->chipset need to be set properly or ide-generic driver will break once
we make a final step in fixing host drivers' dependence on ide_hwifs[].

Problem was catched early thanks to IDE tree exposure in -mm / -next trees
and reported by people listed people (thank you guys!).
Reported-by: N"John Keller" <jpk@sgi.com>
Reported-by: NDmitri Vorobiev <dmitri.vorobiev@gmail.com>
Reported-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Cc: Riccardo Gori <goric@trivenet.it>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

- maintainer has not been active for years
- URLs no longer exist
- covered by the IDE SUBSYSTEM entry
- maintainer email bounces
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Lionel.Bouton@inet6.fr
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

I forgot to remove the ide_etrax100 chipset type when removing the
ETRAX_IDE driver.
Reported-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

While refreshing my physical PCI slot series against upstream, I
noticed a few simple sparse/compile warnings that were easy to
fix.

Fix the following sparse warnings in PCIe:

	drivers/pci/pcie/aer/aerdrv.c:86:6: warning: symbol 'pci_no_aer'
	was not declared. Should it be static?
	drivers/pci/pcie/portdrv_bus.c:21:17: warning: symbol
	'pcie_port_bus_type' was not declared. Should it be static?
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

One more machine with a hidden Intel SMBus. Unhiding it reveals a SMSC
EMC6D100 hardware monitoring chip. I have checked that this machine
has no ACPI magic touching the SMBus nor the hardware monitoring chip,
so this should be safe.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The destination of goto error also does a kfree(g_iommus), so it is not
correct to do one here.

This was found using Coccinelle (http://www.emn.fr/x-info/coccinelle/).
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Cleanup to remove a redundant NULL write to SLOTSTATUS.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Fixup a typo in dbg_ctrl(); it was fetching SLOTSTATUS twice.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NKristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Fix the following problems of shpchp driver about getting hotplug
control from firmware.

  - The shpchp driver must not control the hotplug controller if it
    fails to get control from the firmware. But current shpchp
    controls the hotplug controller regardless the result, because it
    doesn't check the return value of get_hp_hw_control_from_firmware().

  - Current shpchp driver doesn't support _OSC.

The pciehp driver already have the code for evaluating _OSC and OSHP
and shpchp and pciehp can share it. So this patch move that code from
pciehp to acpi_pcihp.c.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Since we need to wait for command completion for muximum 1sec, waiting
command should not be interrupted by a signal.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Current pciehp evaluates _OSC/OSHP method after some controller
initialization is done. So if evaluating _OSC/OSHP is failed, we need
to cleanup already initialized data structures or hardware. This
clearly is not robust way. With this patch, _OSC/OSHP evaluation is
done first.
Signed-off-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>