- 05 9月, 2005 1 次提交
-
-
由 Benjamin LaHaise 提交于
This patch moves the common code in x86 and x86-64's semaphore.c into a single file in lib/semaphore-sleepers.c. The arch specific asm stubs are left in the arch tree (in semaphore.c for i386 and in the asm for x86-64). There should be no changes in code/functionality with this patch. Signed-off-by: NBenjamin LaHaise <benjamin.c.lahaise@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NJeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 8月, 2005 1 次提交
-
-
由 Steven Rostedt 提交于
It has been reported that the way Linux handles NODEFER for signals is not consistent with the way other Unix boxes handle it. I've written a program to test the behavior of how this flag affects signals and had several reports from people who ran this on various Unix boxes, confirming that Linux seems to be unique on the way this is handled. The way NODEFER affects signals on other Unix boxes is as follows: 1) If NODEFER is set, other signals in sa_mask are still blocked. 2) If NODEFER is set and the signal is in sa_mask, then the signal is still blocked. (Note: this is the behavior of all tested but Linux _and_ NetBSD 2.0 *). The way NODEFER affects signals on Linux: 1) If NODEFER is set, other signals are _not_ blocked regardless of sa_mask (Even NetBSD doesn't do this). 2) If NODEFER is set and the signal is in sa_mask, then the signal being handled is not blocked. The patch converts signal handling in all current Linux architectures to the way most Unix boxes work. Unix boxes that were tested: DU4, AIX 5.2, Irix 6.5, NetBSD 2.0, SFU 3.5 on WinXP, AIX 5.3, Mac OSX, and of course Linux 2.6.13-rcX. * NetBSD was the only other Unix to behave like Linux on point #2. The main concern was brought up by point #1 which even NetBSD isn't like Linux. So with this patch, we leave NetBSD as the lonely one that behaves differently here with #2. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 8月, 2005 1 次提交
-
-
由 Andi Kleen 提交于
Some nodes can have large holes on x86-64. This fixes problems with the VM allowing too many dirty pages because it overestimates the number of available RAM in a node. In extreme cases you can end up with all RAM filled with dirty pages which can lead to deadlocks and other nasty behaviour. This patch just tells the VM about the known holes from e820. Reserved (like the kernel text or mem_map) is still not taken into account, but that should be only a few percent error now. Small detail is that the flat setup uses the NUMA free_area_init_node() now too because it offers more flexibility. (akpm: lotsa thanks to Martin for working this problem out) Cc: Martin Bligh <mbligh@mbligh.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 25 8月, 2005 1 次提交
-
-
由 Andi Kleen 提交于
I mistakedly disabled fusion support in an earlier update. Fusion is commonly used on many x86-64 systems, so this was a problem. This patch fixes that. Signed-off-by: NAnd Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 8月, 2005 1 次提交
-
-
由 Andi Kleen 提交于
The code to detect IO links on Opteron would not check if the node had actually memory. This could lead to pci_bus_to_node returning an invalid node, which might cause crashes later when dma_alloc_coherent passes it to page_alloc_node(). The bug has been there forever but for some reason it is causing now crashes. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 20 8月, 2005 2 次提交
-
-
由 Andi Kleen 提交于
Plug a race in TSC synchronization We need to do tsc_sync_wait() before the CPU is set online to prevent multiple CPUs from doing it in parallel - which won't work because TSC sync has global unprotected state. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Don't printk exceptions for ltrace Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 8月, 2005 1 次提交
-
-
由 Eric W. Biederman 提交于
Oops. I knew I didn't have the physical versus logical cpu identifiers right when I generated that patch. It's not nearly as bad as I feared at the time though. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 8月, 2005 1 次提交
-
-
由 Olaf Hering 提交于
modprobe aes does not work on x86_64. i386 has a similar line, this could be the right fix. Would be nice to have in 2.6.13 final. Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 8月, 2005 1 次提交
-
-
由 Andi Kleen 提交于
Don't log machine check events left over from boot. Too many BIOSes leave bogus events in there. This unfortunately also makes it impossible to log events that caused a reboot. For people with non broken BIOS there is mce=bootlog Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 8月, 2005 1 次提交
-
-
由 Eric W. Biederman 提交于
When the sparse mem changes and the kexec changes were merged into setup.c they came in, in the wrong order. This patch changes the order so we don't run sparse_init which uses the bootmem allocator until we all of the reserve_bootmem calls has been made. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 8月, 2005 1 次提交
-
-
由 Daniel Jacobowitz 提交于
The IA32 ptrace emulation currently returns the wrong registers for fs/gs; it's returning what x86_64 calls gs_base. We need regs.gsindex in order for GDB to correctly locate the TLS area. Without this patch, the 32-bit GDB testsuite bombs on a 64-bit kernel. With it, results look about like I'd expect, although there are still a handful of kernel-related failures (vsyscall related?). Signed-off-by: NDaniel Jacobowitz <dan@codesourcery.com> Acked-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 8月, 2005 1 次提交
-
-
由 Alexander Nyberg 提交于
x86_64 had hardcoded the VM_ numbers so it broke down when the numbers were changed. Signed-off-by: NAlexander Nyberg <alexn@telia.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 31 7月, 2005 2 次提交
-
-
The patch adds boundary check for the MAX_GSI_NUM. Same as the update for i386, the patch addresses a problem with ACPI SCI IRQ. The patch corrects the code such that SCI IRQ is skipped and duplicate entry is avoided. The VIA chipset uses 4-bit IRQ register for internal interrupt routing, and therefore cannot handle IRQ numbers assigned to its devices. The patch corrects this problem by allowing PCI IRQs below 16. Signed-off-by: NNatalie Protasevich <Natalie.Protasevich@unisys.com> Acked-by: NAndi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Peterson 提交于
I was observing reproducible crashes on the "movw %bx,(%rsi)" instruction below while a process in a recvfrom() system call was copying packet data to user space. The patch below fixes the exception table and causes the crash to no longer reproduce. Please apply. Acked-by: NAndi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 7月, 2005 3 次提交
-
-
由 Eric W. Biederman 提交于
sync_tsc was using smp_call_function to ask the boot processor to report it's tsc value. smp_call_function performs an IPI_send_allbutself which is a broadcast ipi. There is a window during processor startup during which the target cpu has started and before it has initialized it's interrupt vectors so it can properly process an interrupt. Receveing an interrupt during that window will triple fault the cpu and do other nasty things. Why cli does not protect us from that is beyond me. The simple fix is to match ia64 and provide a smp_call_function_single. Which avoids the broadcast and is more efficient. This certainly fixes the problem of getting stuck on boot which was very easy to trigger on my SMP Hyperthreaded Xeon, and I think it fixes it for the right reasons. Minor changes by AK Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric W. Biederman 提交于
Use the standard hardware page table manipulation macros. This is possible now that linux works with all 4 levels of the page tables. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric W. Biederman 提交于
In an uncensored copy of code from i386 to x86_64 I wound up with inline assembly with the wrong constraints. Use input constraints instead of output constraints. So I know the assembler will do the right thing specify the size of the operand lidtq and lgdtq instead of just lidt and lgdt. Make load_segments use an input constraint, and delete the macro fun. Without having to reload %cs like I do on i386 this code is noticeably simpler. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 7月, 2005 22 次提交
-
-
由 Ravikiran G Thirumalai 提交于
While booting with SMT disabled in bios, when using acpi srat to setup cpu_to_node[], sparse apic_ids create problems. Without this patch, intel x86_64 boxes with hyperthreading disabled in the bios (and which rely on srat for numa setup) endup having incorrect values in cpu_to_node[] arrays, causing sched domains to be built incorrectly etc. Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org> Signed-off-by: NShai Fultheim <shai@scalex86.org> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
arch/x86_64/pci/k8-bus.c: In function `fill_mp_bus_to_cpumask': arch/x86_64/pci/k8-bus.c:32: warning: unused variable `printed' Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nishanth Aravamudan 提交于
Replace schedule_timeout() with msleep() to guarantee the task delays as expected. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
This avoids some potential stack overflows with very deep softirq callchains. i386 does this too. TOADD CFI annotation Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Save a byte here and there. Ultimatively useless, but these things always catch my eyes when reading the code so just fix them for now. Also I got at least one patch fixing of them already, which gives a good excuse. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Gruenbacher 提交于
Icecream preprocesses c sources locally, and sends the result off to a remote host for compiling. It does not recognize includes at assembler level. The fix is to put the assemberincludes an a separate .s file, which will always be assembled locally. Signed-off-by: NAndreas Gruenbacher <agruen@suse.de> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Use physical mode instead of logical mode to address more CPUs. This is also used in the CPU hotplug case to avoid a race. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Will be obsolete with physflat. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Not used anymore since quite some time. Just uses -m32 instead. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
This patch will create machinecheck sysdev directories per CPU. All of the cpus still share the same ctl banks. When compiled with CONFIG_HOTPLUG_CPU, it will also bring up/down sysdev directories as cpus go up/down. I have tested the patch along with CONFIG_HOTPLUG_CPU option on in 2.6.13-rc1 kernel. Minor changes by AK: remove useless unload function Signed-off-by: NJacob Shin <jacob.shin@amd.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
From: Keith Manning Print a boot message for hotplug memory zones Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Keith Mannthey 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Minor cleanup. Move things into their include files, remove obsolete includes, fix indentation, remove obsolete special cases etc. I also added the per cpu section to asm-generic/sections.h and fixed init/main.c to use it. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
No need to print kernel addresses there and clarify what the APIC-ID is. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Does not change any semantics because numa_add_cpu checks for CPU 0 anyways. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Various code needs this information now before the actual SMP bootup. Instead of computing it on the fly while booting the other CPUs set it up now while initial MPtable/MADT parsing. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andi Kleen 提交于
Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-