[ Upstream commit 36b7200f67dfe75b416b5281ed4ace9927b513bc ]

When devices are attached to the amd_iommu in a kdump kernel, the old device
table entries (DTEs), which were copied from the crashed kernel, will be
overwritten with a new domain number.  When the new DTE is written, the IOMMU
is told to flush the DTE from its internal cache--but it is not told to flush
the translation cache entries for the old domain number.

Without this patch, AMD systems using the tg3 network driver fail when kdump
tries to save the vmcore to a network system, showing network timeouts and
(sometimes) IOMMU errors in the kernel log.

This patch will flush IOMMU translation cache entries for the old domain when
a DTE gets overwritten with a new domain number.
Signed-off-by: NStuart Hayes <stuart.w.hayes@gmail.com>
Fixes: 3ac3e5ee ('iommu/amd: Copy old trans table from old kernel')
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 8aafaaf2212192012f5bae305bb31cdf7681d777 ]

If a device has an exclusion range specified in the IVRS
table, this region needs to be reserved in the iova-domain
of that device. This hasn't happened until now and can cause
data corruption on data transfered with these devices.

Treat exclusion ranges as reserved regions in the iommu-core
to fix the problem.

Fixes: be2a022c ('x86, AMD IOMMU: add functions to parse IOMMU memory mapping requirements for devices')
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Reviewed-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NSasha Levin (Microsoft) <sashal@kernel.org>

commit 4e50ce03976fbc8ae995a000c4b10c737467beaa upstream.

Take into account that sg->offset can be bigger than PAGE_SIZE when
setting segment sg->dma_address. Otherwise sg->dma_address will point
at diffrent page, what makes DMA not possible with erros like this:

xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa70c0 flags=0x0020]
xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7040 flags=0x0020]
xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7080 flags=0x0020]
xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7100 flags=0x0020]
xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7000 flags=0x0020]

Additinally with wrong sg->dma_address unmap_sg will free wrong pages,
what what can cause crashes like this:

Feb 28 19:27:45 kernel: BUG: Bad page state in process cinnamon  pfn:39e8b1
Feb 28 19:27:45 kernel: Disabling lock debugging due to kernel taint
Feb 28 19:27:45 kernel: flags: 0x2ffff0000000000()
Feb 28 19:27:45 kernel: raw: 02ffff0000000000 0000000000000000 ffffffff00000301 0000000000000000
Feb 28 19:27:45 kernel: raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
Feb 28 19:27:45 kernel: page dumped because: nonzero _refcount
Feb 28 19:27:45 kernel: Modules linked in: ccm fuse arc4 nct6775 hwmon_vid amdgpu nls_iso8859_1 nls_cp437 edac_mce_amd vfat fat kvm_amd ccp rng_core kvm mt76x0u mt76x0_common mt76x02_usb irqbypass mt76_usb mt76x02_lib mt76 crct10dif_pclmul crc32_pclmul chash mac80211 amd_iommu_v2 ghash_clmulni_intel gpu_sched i2c_algo_bit ttm wmi_bmof snd_hda_codec_realtek snd_hda_codec_generic drm_kms_helper snd_hda_codec_hdmi snd_hda_intel drm snd_hda_codec aesni_intel snd_hda_core snd_hwdep aes_x86_64 crypto_simd snd_pcm cfg80211 cryptd mousedev snd_timer glue_helper pcspkr r8169 input_leds realtek agpgart libphy rfkill snd syscopyarea sysfillrect sysimgblt fb_sys_fops soundcore sp5100_tco k10temp i2c_piix4 wmi evdev gpio_amdpt pinctrl_amd mac_hid pcc_cpufreq acpi_cpufreq sg ip_tables x_tables ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) fscrypto(E) sd_mod(E) hid_generic(E) usbhid(E) hid(E) dm_mod(E) serio_raw(E) atkbd(E) libps2(E) crc32c_intel(E) ahci(E) libahci(E) libata(E) xhci_pci(E) xhci_hcd(E)
Feb 28 19:27:45 kernel:  scsi_mod(E) i8042(E) serio(E) bcache(E) crc64(E)
Feb 28 19:27:45 kernel: CPU: 2 PID: 896 Comm: cinnamon Tainted: G    B   W   E     4.20.12-arch1-1-custom #1
Feb 28 19:27:45 kernel: Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B450M Pro4, BIOS P1.20 06/26/2018
Feb 28 19:27:45 kernel: Call Trace:
Feb 28 19:27:45 kernel:  dump_stack+0x5c/0x80
Feb 28 19:27:45 kernel:  bad_page.cold.29+0x7f/0xb2
Feb 28 19:27:45 kernel:  __free_pages_ok+0x2c0/0x2d0
Feb 28 19:27:45 kernel:  skb_release_data+0x96/0x180
Feb 28 19:27:45 kernel:  __kfree_skb+0xe/0x20
Feb 28 19:27:45 kernel:  tcp_recvmsg+0x894/0xc60
Feb 28 19:27:45 kernel:  ? reuse_swap_page+0x120/0x340
Feb 28 19:27:45 kernel:  ? ptep_set_access_flags+0x23/0x30
Feb 28 19:27:45 kernel:  inet_recvmsg+0x5b/0x100
Feb 28 19:27:45 kernel:  __sys_recvfrom+0xc3/0x180
Feb 28 19:27:45 kernel:  ? handle_mm_fault+0x10a/0x250
Feb 28 19:27:45 kernel:  ? syscall_trace_enter+0x1d3/0x2d0
Feb 28 19:27:45 kernel:  ? __audit_syscall_exit+0x22a/0x290
Feb 28 19:27:45 kernel:  __x64_sys_recvfrom+0x24/0x30
Feb 28 19:27:45 kernel:  do_syscall_64+0x5b/0x170
Feb 28 19:27:45 kernel:  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Cc: stable@vger.kernel.org
Reported-and-tested-by: NJan Viktorin <jan.viktorin@gmail.com>
Reviewed-by: NAlexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com>
Fixes: 80187fd3 ('iommu/amd: Optimize map_sg and unmap_sg')
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 9825bd94e3a2baae1f4874767ae3a7d4c049720e ]

When a VM is terminated, the VFIO driver detaches all pass-through
devices from VFIO domain by clearing domain id and page table root
pointer from each device table entry (DTE), and then invalidates
the DTE. Then, the VFIO driver unmap pages and invalidate IOMMU pages.

Currently, the IOMMU driver keeps track of which IOMMU and how many
devices are attached to the domain. When invalidate IOMMU pages,
the driver checks if the IOMMU is still attached to the domain before
issuing the invalidate page command.

However, since VFIO has already detached all devices from the domain,
the subsequent INVALIDATE_IOMMU_PAGES commands are being skipped as
there is no IOMMU attached to the domain. This results in data
corruption and could cause the PCI device to end up in indeterministic
state.

Fix this by invalidate IOMMU pages when detach a device, and
before decrementing the per-domain device reference counts.

Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Suggested-by: NJoerg Roedel <joro@8bytes.org>
Co-developed-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Fixes: 6de8ad9b ('x86/amd-iommu: Make iommu_flush_pages aware of multiple IOMMUs')
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f1724c0883bb0ce93b8dcb94b53dcca3b75ac9a7 ]

In the error path of map_sg there is an incorrect if condition
for breaking out of the loop that searches the scatterlist
for mapped pages to unmap. Instead of breaking out of the
loop once all the pages that were mapped have been unmapped,
it will break out of the loop after it has unmapped 1 page.
Fix the condition, so it breaks out of the loop only after
all the mapped pages have been unmapped.

Fixes: 80187fd3 ("iommu/amd: Optimize map_sg and unmap_sg")
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: NJerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 51d8838d66d3249508940d8f59b07701f2129723 ]

In the error path of map_sg, free_iova_fast is being called with
address instead of the pfn. This results in a bad value getting into
the rcache, and can result in hitting a BUG_ON when
iova_magazine_free_pfns is called.

Cc: Joerg Roedel <joro@8bytes.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NJerry Snitselaar <jsnitsel@redhat.com>
Fixes: 80187fd3 ("iommu/amd: Optimize map_sg and unmap_sg")
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c12b08ebbe16f0d3a96a116d86709b04c1ee8e74 ]

The parameter is still there but it's ignored. We need to check its
value before deciding to go into passthrough mode for AMD IOMMU v2
capable device.

We occasionally use this parameter to force v2 capable device into
translation mode to debug memory corruption that we suspect is
caused by DMA writes.

To address the following comment from Joerg Roedel on the first
version, v2 capability of device is completely ignored.
> This breaks the iommu_v2 use-case, as it needs a direct mapping for the
> devices that support it.

And from Documentation/admin-guide/kernel-parameters.txt:
  This option does not override iommu=pt

Fixes: aafd8ba0 ("iommu/amd: Implement add_device and remove_device")
Signed-off-by: NYu Zhao <yuzhao@google.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

Boris Ostrovsky reported a memory leak with device passthrough when SME
is active.

The VFIO driver uses iommu_iova_to_phys() to get the physical address for
an iova. This physical address is later passed into vfio_unmap_unpin() to
unpin the memory. The vfio_unmap_unpin() uses pfn_valid() before unpinning
the memory. The pfn_valid() check was failing because encryption mask was
part of the physical address returned. This resulted in the memory not
being unpinned and therefore leaked after the guest terminates.

The memory encryption mask must be cleared from the physical address in
iommu_iova_to_phys().

Fixes: 2543a786 ("iommu/amd: Allow the AMD IOMMU to work with memory encryption")
Reported-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: <iommu@lists.linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

ACPI HID devices do not actually have an alias for
them in the IVRS. But dev_data->alias is still used
for indexing into the IOMMU device table for devices
being handled by the IOMMU. So for ACPI HID devices,
we simply return the corresponding devid as an alias,
as parsed from IVRS table.
Signed-off-by: NArindam Nath <arindam.nath@amd.com>
Fixes: 2bf9a0a1 ('iommu/amd: Add iommu support for ACPI HID devices')
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

The CMA memory allocator doesn't support standard gfp flags for memory
allocation, so there is no point having it as a parameter for
dma_alloc_from_contiguous() function.  Replace it by a boolean no_warn
argument, which covers all the underlaying cma_alloc() function
supports.

This will help to avoid giving false feeling that this function supports
standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer,
what has already been an issue: see commit dd65a941 ("arm64:
dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag").

Link: http://lkml.kernel.org/r/20180709122020eucas1p21a71b092975cb4a3b9954ffc63f699d1~-sqUFoa-h2939329393eucas1p2Y@eucas1p2.samsung.comSigned-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NMichał Nazarewicz <mina86@mina86.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All iommu drivers use the default_iommu_map_sg implementation, and there
is no good reason to ever override it.  Just expose it as iommu_map_sg
directly and remove the indirection, specially in our post-spectre world
where indirect calls are horribly expensive.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

The WARN_ON() was introduced in commit 272e4f99 ("iommu/amd: WARN
when __[attach|detach]_device are called with irqs enabled") to ensure
that the domain->lock is taken in proper irqs disabled context. This
is required, because the domain->lock is taken as well in irq
context.

The proper context check by the WARN_ON() is redundant, because it is
already covered by LOCKDEP. When working with locks and changing
context, a run with LOCKDEP is required anyway and would detect the
wrong lock context.

Furthermore all callers for those functions are within the same file
and all callers acquire another lock which already disables interrupts.
Signed-off-by: NAnna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

The AMD IOMMU XT mode enables interrupt remapping with 32-bit destination
APIC ID, which is required for x2APIC. The feature is available when
the XTSup bit is set in the IOMMU Extended Feature register
and/or the IVHD Type 10h IOMMU Feature Reporting field.

For more information, please see section "IOMMU x2APIC Support" of
the AMD I/O Virtualization Technology (IOMMU) Specification.

Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

Although the mapping has already been removed in the page table, it maybe
still exist in TLB. Suppose the freed IOVAs is reused by others before the
flush operation completed, the new user can not correctly access to its
meomory.
Signed-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Fixes: b1516a14 ('iommu/amd: Implement flush queue')
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

Argument "page_size" passing to function "fetch_pte" could be
uninitialized if the function returns NULL

The caller "iommu_unmap_page" checks the return value but the page_size is
used outside the if block.
Signed-off-by: Nyzhai003@ucr.edu <yzhai003@ucr.edu>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

This reverts commit b468620f.

It turns out that this broke drm on AMD platforms. Quoting Gabriel C:
 "I can confirm reverting b468620f fixes
  that issue for me.

  The GPU is working fine with SME enabled.

  Now with working GPU :) I can also confirm performance is back to
  normal without doing any other workarounds"

Christan König analyzed it partially:
 "As far as I analyzed it we now get an -ENOMEM from dma_alloc_attrs()
  in drivers/gpu/drm/ttm/ttm_page_alloc_dma.c when IOMMU is enabled"

and Christoph Hellwig responded:
 "I think the prime issue is that dma_direct_alloc respects the dma
  mask. Which we don't need if actually using the iommu. This would be
  mostly harmless exept for the the SEV bit high in the address that
  makes the checks fail.

  For now I'd say revert this commit for 4.17/4.18-rc and I'll look into
  addressing these issues properly"
Reported-and-bisected-by: NGabriel C <nix.or.die@gmail.com>
Acked-by: NChristoph Hellwig <hch@lst.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org		# v4.17
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To address the EBUSY fail of interrupt affinity settings in case that the
previous setting has not been cleaned up yet, use the new apic_ack_irq()
function instead of the special ir_ack_apic_edge() implementation which is
merily a wrapper around ack_APIC_irq().

Preparatory change for the real fix

Fixes: dccfe314 ("x86/vector: Simplify vector move cleanup")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Tested-by: NSong Liu <songliubraving@fb.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <liu.song.a23@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: stable@vger.kernel.org
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tariq Toukan <tariqt@mellanox.com>
Link: https://lkml.kernel.org/r/20180604162224.555716895@linutronix.de

The check for !dev_data->domain in __detach_device() emits a warning and
returns. The calling code in detach_device() dereferences dev_data->domain
afterwards unconditionally, so in case that dev_data->domain is NULL the
warning will be immediately followed by a NULL pointer dereference.

The calling code in cleanup_domain() loops infinite when !dev_data->domain
and the check in __detach_device() returns immediately because dev_list is
not changed.

do_detach() duplicates this check without throwing a warning.

Move the check with the explanation of the do_detach() code into the caller
detach_device() and return immediately. Throw an error, when hitting the
condition in cleanup_domain().
Signed-off-by: NAnna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

Suggested-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NAnna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

Adds a "pci=noats" boot parameter.  When supplied, all ATS related
functions fail immediately and the IOMMU is configured to not use
device-IOTLB.

Any function that checks for ATS capabilities directly against the devices
should also check this flag.  Currently, such functions exist only in IOMMU
drivers, and they are covered by this patch.

The motivation behind this patch is the existence of malicious devices.
Lots of research has been done about how to use the IOMMU as protection
from such devices.  When ATS is supported, any I/O device can access any
physical address by faking device-IOTLB entries.  Adding the ability to
ignore these entries lets sysadmins enhance system security.
Signed-off-by: NGil Kupfer <gilkup@cs.technion.ac.il>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJoerg Roedel <jroedel@suse.de>

A new events have been defined in the AMD IOMMU spec:

0x09 - "invalid PPR request"

Add support for logging this type of event.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
~
~
~
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

Provide detailed data for each event, as appropriate.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

The newly introduced lock is only used when CONFIG_IRQ_REMAP is enabled:

drivers/iommu/amd_iommu.c:86:24: error: 'iommu_table_lock' defined but not used [-Werror=unused-variable]
 static DEFINE_SPINLOCK(iommu_table_lock);

This moves the definition next to the user, within the #ifdef protected
section of the file.

Fixes: ea6166f4 ("iommu/amd: Split irq_lookup_table out of the amd_iommu_devtable_lock")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

In the unlikely case when alloc_irq_table() is not able to return a
remap table then "ret" will be assigned with an error code. Later, the
code checks `index' and if it is negative (which it is because it is
initialized with `-1') and then then function properly aborts but
returns `-1' instead `-ENOMEM' what was intended.
In order to correct this, I assign -ENOMEM to index.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

Before commit 0bb6e243 ("iommu/amd: Support IOMMU_DOMAIN_DMA type
allocation") amd_iommu_devtable_lock had a read_lock() user but now
there are none. In fact, after the mentioned commit we had only
write_lock() user of the lock. Since there is no reason to keep it as
writer lock, change its type to a spin_lock.
I *think* that we might even be able to remove the lock because all its
current user seem to have their own protection.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

The irq_remap_table is allocated while the iommu_table_lock is held with
interrupts disabled.
>From looking at the call sites, all callers are in the early device
initialisation (apic_bsp_setup(), pci_enable_device(),
pci_enable_msi()) so make sense to drop the lock which also enables
interrupts and try to allocate that memory with GFP_KERNEL instead
GFP_ATOMIC.

Since during the allocation the iommu_table_lock is dropped, we need to
recheck if table exists after the lock has been reacquired. I *think*
that it is impossible that the "devid" entry appears in irq_lookup_table
while the lock is dropped since the same device can only be probed once.
However I check for both cases, just to be sure.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

Setting the IRQ remap table for a specific devid (or its alias devid)
includes three steps. Those three steps are always repeated each time
this is done.
Introduce a new helper function, move those steps there and use that
function instead. The compiler can still decide if it is worth to
inline.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

The variable of type struct irq_remap_table is always named `table'
except in amd_iommu_update_ga() where it is called `irt'. Make it
consistent and name it also `table'.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

alloc_irq_table() has a special ioapic argument. If set then it will
pre-allocate / reserve the first 32 indexes. The argument is only once
true and it would make alloc_irq_table() a little simpler if we would
extract the special bits to the caller.
The caller of irq_remapping_alloc() is holding irq_domain_mutex so the
initialization of iommu->irte_ops->set_allocated() should not race
against other user.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

The function get_irq_table() reads/writes irq_lookup_table while holding
the amd_iommu_devtable_lock. It also modifies
amd_iommu_dev_table[].data[2].
set_dte_entry() is using amd_iommu_dev_table[].data[0|1] (under the
domain->lock) so it should be okay. The access to the iommu is
serialized with its own (iommu's) lock.

So split out get_irq_table() out of amd_iommu_devtable_lock's lock.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

domain_id_alloc() and domain_id_free() is used for id management. Those
two function share a bitmap (amd_iommu_pd_alloc_bitmap) and set/clear
bits based on id allocation. There is no need to share this with
amd_iommu_devtable_lock, it can use its own lock for this operation.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

alloc_dev_data() adds new items to dev_data_list and search_dev_data()
is searching for items in this list. Both protect the access to the list
with a spinlock.
There is no need to navigate forth and back within the list and there is
also no deleting of a specific item. This qualifies the list to become a
lock less list and as part of this, the spinlock can be removed.
With this change the ordering of those items within the list is changed:
before the change new items were added to the end of the list, now they
are added to the front. I don't think it matters but wanted to mention
it.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

find_dev_data() does not check whether the return value alloc_dev_data()
is NULL. This was okay once because the pointer was returned once as-is.
Since commit df3f7a6e ("iommu/amd: Use is_attach_deferred
call-back") the pointer may be used within find_dev_data() so a NULL
check is required.

Cc: Baoquan He <bhe@redhat.com>
Fixes: df3f7a6e ("iommu/amd: Use is_attach_deferred call-back")
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

This cleans up the code a lot by removing duplicate logic.
Tested-by: NTom Lendacky <thomas.lendacky@amd.com>
Tested-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NJoerg Roedel <jroedel@suse.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-8-hch@lst.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

The generic DMA-direct (CONFIG_DMA_DIRECT_OPS=y) implementation is now
functionally equivalent to the x86 nommu dma_map implementation, so
switch over to using it.

That includes switching from using x86_dma_supported in various IOMMU
drivers to use dma_direct_supported instead, which provides the same
functionality.
Tested-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-4-hch@lst.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

Remove printk and use a more preferable error logging function.
Signed-off-by: NGary R Hook <gary.hook@amd.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

Since AMD IOMMU driver currently flushes all TLB entries
when page size is more than one, use the same interface
for both iommu_ops.flush_iotlb_all() and iommu_ops.iotlb_sync().

Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

get_irq_table() previously acquired amd_iommu_devtable_lock which is not
a raw lock, and thus cannot be acquired from atomic context on
PREEMPT_RT.  Many calls to modify_irte*() come from atomic context due to
the IRQ desc->lock, as does amd_iommu_update_ga() due to the preemption
disabling in vcpu_load/put().

The only difference between calling get_irq_table() and reading from
irq_lookup_table[] directly, other than the lock acquisition and
amd_iommu_rlookup_table[] check, is if the table entry is unpopulated,
which should never happen when looking up a devid that came from an
irq_2_irte struct, as get_irq_table() would have already been called on
that devid during irq_remapping_alloc().

The lock acquisition is not needed in these cases because entries in
irq_lookup_table[] never change once non-NULL -- nor would the
amd_iommu_devtable_lock usage in get_irq_table() provide meaningful
protection if they did, since it's released before using the looked up
table in the get_irq_table() caller.

Rename the old get_irq_table() to alloc_irq_table(), and create a new
lockless get_irq_table() to be used in non-allocating contexts that WARNs
if it doesn't find what it's looking for.
Signed-off-by: NScott Wood <swood@redhat.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

Currently, iommu_unmap, iommu_unmap_fast and iommu_map_sg return
size_t.  However, some of the return values are error codes (< 0),
which can be misinterpreted as large size. Therefore, returning size 0
instead to signify failure to map/unmap.

Cc: Joerg Roedel <joro@8bytes.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: NSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>

search_dev_data() acquires a non-raw lock, which can't be done
from atomic context on PREEMPT_RT.  There is no need to look at
dev_data because guest_mode should never be set if use_vapic is
not set.
Signed-off-by: NScott Wood <swood@redhat.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>