Introduce the transport level diag handler module for UDP (and UDP-lite)
sockets and register (empty for now) callbacks in the inet_diag module.
Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The UDP diag get_exact handler will require them to find a
socket by provided net, [sd]addr-s, [sd]ports and device.
Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce two callbacks in inet_diag_handler -- one for dumping all
sockets (with filters) and the other one for dumping a single sk.

Replace direct calls to icsk handlers with indirect calls to callbacks
provided by handlers.

Make existing TCP and DCCP handlers use provided helpers for icsk-s.

The UDP diag module will provide its own.
Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The existing inet_csk_diag_fill dumps the inet connection sock info
into the netlink inet_diag_message. Prepare this routine to be able
to dump only the inet_sock part of a socket if the icsk part is missing.

This will be used by UDP diag module when dumping UDP sockets.
Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The upcoming UDP module will require exactly this ability, so just
move the existing code to provide one.
Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to previous patch: the 1st part locks the inet handler
and will get generalized and the 2nd one dumps icsk-s and will
be used by TCP and DCCP handlers.
Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 1st part locks the inet handler and the 2nd one dump the
inet connection sock.

In the next patches the 1st part will be generalized to call
the socket dumping routine indirectly (i.e. TCP/UDP/DCCP) and
the 2nd part will be used by TCP and DCCP handlers.
Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The netlink diag susbsys stores sk address bits in the nl message
as a "cookie" and uses one when dumps details about particular
socket.

The same will be required for udp diag module, so introduce a heler
in inet_diag module
Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There's an info_size value stored on inet_diag_handler, but for existing
code this value is effectively constant, so just use sizeof(struct tcp_info)
where required.
Signed-off-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now RED uses a Q0.32 number to store max_p (max probability), allow
RED/GRED/CHOKE to use/report full resolution at config/dump time.

Old tc binaries are non aware of new attributes, and still set/get Plog.

New tc binary set/get both Plog and max_p for backward compatibility,
they display "probability value" if they get max_p from new kernels.

# tc -d  qdisc show dev ...
...
qdisc red 10: parent 1:1 limit 360Kb min 30Kb max 90Kb ecn ewma 5
probability 0.09 Scell_log 15

Make sure we avoid potential divides by 0 in reciprocal_value(), if
(max_th - min_th) is big.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 865d9f9f.

This commit breaks the build with CONFIG_NETPRIO_CGROUP=y so
revert it. It does build as a module though. The SUBSYS macro
in the cgroup core code automatically defines a subsys structure
as extern. Long term we should fix the macro. And I need to
fully build test things.

Tested with CONFIG_NETPRIO_CGROUP={y|m|n} with and without
CONFIG_CGROUPS defined.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
CC: Neil Horman <nhorman@tuxdriver.com>
Reported-By: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These tests are off by one because sock_diag_handlers[] only has AF_MAX
elements.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NPavel Emelyanov <xemul@parallels.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net_prio_subsys can be made static this removes the sparse
warning it was throwing.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code is missing initialization of NO_FCOE_FLAG and NO_ISCSI*FLAGS
when CONFIG_CNIC is not selected.
This causes panic during driver load since commit
1d187b34 where NO_FCOE tested
unconditionally (outside #ifdef BCM_CNIC  structure) and
accessed fp[FCOE_IDX] which is not allocated.
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add netpoll support to 802.1q vlan devices.  Based on the netpoll support
in the bridging code.  Tested on a forced_eth device with netconsole.
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adaptative RED AQM for linux, based on paper from Sally FLoyd,
Ramakrishna Gummadi, and Scott Shenker, August 2001 :

http://icir.org/floyd/papers/adaptiveRed.pdf

Goal of Adaptative RED is to make max_p a dynamic value between 1% and
50% to reach the target average queue : (max_th - min_th) / 2

Every 500 ms:
 if (avg > target and max_p <= 0.5)
  increase max_p : max_p += alpha;
 else if (avg < target and max_p >= 0.01)
  decrease max_p : max_p *= beta;

target :[min_th + 0.4*(min_th - max_th),
          min_th + 0.6*(min_th - max_th)].
alpha : min(0.01, max_p / 4)
beta : 0.9
max_P is a Q0.32 fixed point number (unsigned, with 32 bits mantissa)

Changes against our RED implementation are :

max_p is no longer a negative power of two (1/(2^Plog)), but a Q0.32
fixed point number, to allow full range described in Adatative paper.

To deliver a random number, we now use a reciprocal divide (thats really
a multiply), but this operation is done once per marked/droped packet
when in RED_BETWEEN_TRESH window, so added cost (compared to previous
AND operation) is near zero.

dump operation gives current max_p value in a new TCA_RED_MAX_P
attribute.

Example on a 10Mbit link :

tc qdisc add dev $DEV parent 1:1 handle 10: est 1sec 8sec red \
   limit 400000 min 30000 max 90000 avpkt 1000 \
   burst 55 ecn adaptative bandwidth 10Mbit

# tc -s -d qdisc show dev eth3
...
qdisc red 10: parent 1:1 limit 400000b min 30000b max 90000b ecn
adaptative ewma 5 max_p=0.113335 Scell_log 15
 Sent 50414282 bytes 34504 pkt (dropped 35, overlimits 1392 requeues 0)
 rate 9749Kbit 831pps backlog 72056b 16p requeues 0
  marked 1357 early 35 pdrop 0 other 0
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

So far when vlan id was added to team device befor port was added, this
vid was not added to port's vlan filter. Also after removal, vid stayed
in port device's vlan filter. Benefit of new vlan functions to handle
this work.
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce functions handy to copy vlan ids from one driver's list to
another.
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This allows to keep track of vids needed to be in rx vlan filters of
devices even if they are used in bond/team etc.

vlan_info as well as vlan_group previously was, is allocated when first
vid is added and dealocated whan last vid is deleted.

vlan_group definition is moved to private header.
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds wrapper for ndo_vlan_rx_add_vid/ndo_vlan_rx_kill_vid
functions. Check for NETIF_F_HW_VLAN_FILTER feature is done in this
wrapper.
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Let caller know the result of adding/removing vlan id to/from vlan
filter.

In some drivers I make those functions to just return 0. But in those
where there is able to see if hw setup went correctly, return value is
set appropriately.
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As this structure is priv, name it approprietely. Also for pointer to it
use name "vlan".
Signed-off-by: NJiri Pirko <jpirko@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add missing netpoll support.
Signed-off-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The .remove code is broken in several ways.
 - mdiobus_unregister() is called twice for the same object in case of dual FEC
 - phy_disconnect() is being called when the PHY is already disconnected
 - the requested IRQ(s) are not freed
 - fec_stop() is being called with the inteface already stopped

 All of those lead to kernel crashes if the remove function is actually used.
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Additionally to setting the ETHER_EN bit in FEC_ECNTRL the MII/RMII
setting in FEC_R_CNTRL needs to be preserved to keep the MII interface
functional.
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the MAC address is supplied via platform_data it should be OK as
it is and should not be modified in case of a dual FEC setup.
Also copying the MAC from platform_data to the single 'macaddr'
variable will overwrite the MAC for the first interface in case of a
dual FEC setup.
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

prevent calling request_irq() with a known invalid IRQ number and
preserve the return value of the platform_get_irq() function
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Upon detection of a FDX/HDX change the interface is restarted twice.
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The con_id is actually not needed for clk_get().
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- remove some bogus whitespace
 - remove line wraps from printk messages
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch updates the tg3 version to 3.122.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Reviewed-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the driver to return the flow control configuration
rather than the flow control status through the ETHTOOL_GPAUSEPARAM
ioctl.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Reviewed-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds code to track the autonegotiation advertisements of the
link partner and report them through ethtool.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch integrates tg3_adv_1000T_flowctrl_ok() into
tg3_copper_is_advertising_all() and renames the function
tg3_phy_copper_an_config_ok().
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Reviewed-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tg3 has a place to store stats, but doesn't really use it.  This patch
modifies the driver so that stats are saved across chip resets and gets
cleared across close / open calls.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: NMichael Chan <mchan@broadcom.com>
Reviewed-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the ethtool stats member from the tg3 device
structure.
Signed-off-by: NMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Reviewed-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If user has configured a MAC address that is not one of the existing
ports of the bridge, then we need to add a special entry in the forwarding
table. This forwarding table entry has no outgoing port so it has to be
treated a little differently. The special entry is reported by the netlink
interface with ifindex of bridge, but ignored by the old interface since there
is no usable way to put it in the ABI.
Reported-by: NKoki Sanagi <sanagi.koki@jp.fujitsu.com>
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pass bridge to fdb_notify so it can determine correct namespace based
on namespace of bridge rather than namespace of destination port.
Also makes next patch easier.
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>