bitmap_create() allocates memory with GFP_KERNEL and
so can wait for IO.
If called while the array is quiesced, it could wait indefinitely
for write out to the array - deadlock.
So call bitmap_create() before quiescing the array.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

Most often mddev_suspend() is called with
reconfig_mutex held.  Make this a requirement in
preparation a subsequent patch.  Also require
reconfig_mutex to be held for mddev_resume(),
partly for symmetry and partly to guarantee
no races with incr/decr of mddev->suspend.

Taking the mutex in r5c_disable_writeback_async() is
a little tricky as this is called from a work queue
via log->disable_writeback_work, and flush_work()
is called on that while holding ->reconfig_mutex.
If the work item hasn't run before flush_work()
is called, the work function will not be able to
get the mutex.

So we use mddev_trylock() inside the wait_event() call, and have that
abort when conf->log is set to NULL, which happens before
flush_work() is called.
We wait in mddev->sb_wait and ensure this is woken
when any of the conditions change.  This requires
waking mddev->sb_wait in mddev_unlock().  This is only
like to trigger extra wake_ups of threads that needn't
be woken when metadata is being written, and that
doesn't happen often enough that the cost would be
noticeable.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

Having both a bitmap and a journal is pointless.
Attempting to do so can corrupt the bitmap if the journal
replay happens before the bitmap is initialized.
Rather than try to avoid this corruption, simply
refuse to allow arrays with both a bitmap and a journal.
So:
 - if raid5_run sees both are present, fail.
 - if adding a bitmap finds a journal is present, fail
 - if adding a journal finds a bitmap is present, fail.

Cc: stable@vger.kernel.org (4.10+)
Signed-off-by: NNeilBrown <neilb@suse.com>
Tested-by: NJoshua Kinard <kumba@gentoo.org>
Acked-by: NJoshua Kinard <kumba@gentoo.org>
Signed-off-by: NShaohua Li <shli@fb.com>

Motivated by the desire to illiminate the imprecise nature of
DM-specific patches being unnecessarily sent to both the MD maintainer
and mailing-list.  Which is born out of the fact that DM files also
reside in drivers/md/

Now all MD-specific files in drivers/md/ start with either "raid" or
"md-" and the MAINTAINERS file has been updated accordingly.

Shaohua: don't change module name
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NShaohua Li <shli@fb.com>

Since commit 4ad23a97 ("MD: use per-cpu counter for writes_pending"),
the wait_queue is only got invoked if THREAD_WAKEUP is not set previously.

With above change, I can see process_metadata_update could always hang on
the wait queue, because mddev->thread could stay on 'D' status and the
THREAD_WAKEUP flag is not cleared since there are lots of place to wake up
mddev->thread. Then deadlock happened as follows:

linux175:~ # ps aux|grep md|grep D
root    20117   0.0 0.0         0   0 ? D   03:45   0:00 [md0_raid1]
root    20125   0.0 0.0         0   0 ? D   03:45   0:00 [md0_cluster_rec]
linux175:~ # cat /proc/20117/stack
[<ffffffffa0635604>] dlm_lock_sync+0x94/0xd0 [md_cluster]
[<ffffffffa0635674>] lock_token+0x34/0xd0 [md_cluster]
[<ffffffffa0635804>] metadata_update_start+0x64/0x110 [md_cluster]
[<ffffffffa04d985b>] md_update_sb.part.58+0x9b/0x860 [md_mod]
[<ffffffffa04da035>] md_update_sb+0x15/0x30 [md_mod]
[<ffffffffa04dc066>] md_check_recovery+0x266/0x490 [md_mod]
[<ffffffffa06450e2>] raid1d+0x42/0x810 [raid1]
[<ffffffffa04d2252>] md_thread+0x122/0x150 [md_mod]
[<ffffffff81091741>] kthread+0x101/0x140
linux175:~ # cat /proc/20125/stack
[<ffffffffa0636679>] recv_daemon+0x3f9/0x5c0 [md_cluster]
[<ffffffffa04d2252>] md_thread+0x122/0x150 [md_mod]
[<ffffffff81091741>] kthread+0x101/0x140

So let's revert the part of code in the commit to resovle the problem since
we can't get lots of benefits of previous change.

Fixes: 4ad23a97 ("MD: use per-cpu counter for writes_pending")
Signed-off-by: NGuoqing Jiang <gqjiang@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

A recent patch aimed to cause md_write_start() to fail (rather than
block) when the mddev was suspending, so as to avoid deadlocks.
Unfortunately the test in wait_event() was wrong, and it didn't change
behaviour at all.

We wait_event() must wait until the metadata is written OR the array is
suspending.

Fixes: cc27b0c7 ("md: fix deadlock between mddev_suspend() and md_write_start()")
Cc: stable@vger.kernel.org
Reported-by: NXiao Ni <xni@redhat.com>
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

md_submit_flush_data calls pers->make_request, which missed the suspend check.
Fix it with the new md_handle_request API.
Reported-by: NNate Dailey <nate.dailey@stratus.com>
Tested-by: NNate Dailey <nate.dailey@stratus.com>
Fix: cc27b0c7(md: fix deadlock between mddev_suspend() and md_write_start())
Cc: stable@vger.kernel.org
Reviewed-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

With commit cc27b0c7, pers->make_request could bail out without handling
the bio. If that happens, we should retry.  The commit fixes md_make_request
but not other call sites. Separate the request handling part, so other call
sites can use it.
Reported-by: NNate Dailey <nate.dailey@stratus.com>
Fix: cc27b0c7(md: fix deadlock between mddev_suspend() and md_write_start())
Cc: stable@vger.kernel.org
Reviewed-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

Increase PPL area to 1MB and use it as circular buffer to store PPL. The
entry with highest generation number is the latest one. If PPL to be
written is larger then space left in a buffer, rewind the buffer to the
start (don't wrap it).
Signed-off-by: NPawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: NArtur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NShaohua Li <shli@fb.com>

Since commit f1514638 ("fs: seq_file - add event counter to simplify
poll() support"), md.c code has been no longer used the private field of
the struct seq_file, but seq_release_private() has been continued to be
used to release the allocated seq_file. This seems to have been
forgotten. So convert it to use seq_release() instead of
seq_release_private().
Signed-off-by: NCihangir Akturk <cakturk@gmail.com>
Signed-off-by: NShaohua Li <shli@fb.com>

In case of external metadata arrays spare disks are added to containers
first. mdadm keeps monitoring /proc/mdstat output and when spare disk is
available, it moves it from the container to the array. The problem is
there is no notification of new spare disk in the container and mdadm
waits a long time (until timeout) before it takes the action.
Signed-off-by: NAlexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: NShaohua Li <shli@fb.com>

This way we don't need a block_device structure to submit I/O.  The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open.  Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).

For the actual I/O path all that we need is the gendisk, which exists
once per block device.  But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.

Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

->safemode should be triggered by mdadm for external metadaa array, otherwise
array's state confuses mdadm.

Fixes: 33182d15(md: always clear ->safemode when md_check_recovery gets the mddev lock.)
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

md_write_start() needs to clear the in_sync flag is it is set, or if
there might be a race with set_in_sync() such that the later will
set it very soon.  In the later case it is sufficient to take the
spinlock to synchronize with set_in_sync(), and then set the flag
if needed.

The current test is incorrect.
It should be:
  if "flag is set" or "race is possible"

"flag is set" is trivially "mddev->in_sync".
"race is possible" should be tested by "mddev->sync_checkers".

If sync_checkers is 0, then there can be no race.  set_in_sync() will
wait in percpu_ref_switch_to_atomic_sync() for an RCU grace period,
and as md_write_start() holds the rcu_read_lock(), set_in_sync() will
be sure ot see the update to writes_pending.

If sync_checkers is > 0, there could be race.  If md_write_start()
happened entirely between
		if (!mddev->in_sync &&
		    percpu_ref_is_zero(&mddev->writes_pending)) {
and
			mddev->in_sync = 1;
in set_in_sync(), then it would not see that is_sync had been set,
and set_in_sync() would not see that writes_pending had been
incremented.

This bug means that in_sync is sometimes not set when it should be.
Consequently there is a small chance that the array will be marked as
"clean" when in fact it is inconsistent.

Fixes: 4ad23a97 ("MD: use per-cpu counter for writes_pending")
cc: stable@vger.kernel.org (v4.12+)
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

If ->safemode == 1, md_check_recovery() will try to get the mddev lock
and perform various other checks.
If mddev->in_sync is zero, it will call set_in_sync, and clear
->safemode.  However if mddev->in_sync is not zero, ->safemode will not
be cleared.

When md_check_recovery() drops the mddev lock, the thread is woken
up again.  Normally it would just check if there was anything else to
do, find nothing, and go to sleep.  However as ->safemode was not
cleared, it will take the mddev lock again, then wake itself up
when unlocking.

This results in an infinite loop, repeatedly calling
md_check_recovery(), which RCU or the soft-lockup detector
will eventually complain about.

Prior to commit 4ad23a97 ("MD: use per-cpu counter for
writes_pending"), safemode would only be set to one when the
writes_pending counter reached zero, and would be cleared again
when writes_pending is incremented.  Since that patch, safemode
is set more freely, but is not reliably cleared.

So in md_check_recovery() clear ->safemode before checking ->in_sync.

Fixes: 4ad23a97 ("MD: use per-cpu counter for writes_pending")
Cc: stable@vger.kernel.org (4.12+)
Reported-by: NDominik Brodowski <linux@dominikbrodowski.net>
Reported-by: NDavid R <david@unsolicited.net>
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

spin_is_locked always returns 0 for UP case, so ignores it
Reported-by: NJoshua Kinard <kumba@gentoo.org>
Signed-off-by: NShaohua Li <shli@fb.com>

bioset_free() will take a mutex, so can't get called with spinlock hold.

Fix: 5a85071c(md: use a separate bio_set for synchronous IO.)
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

rdev->mddev could be null in start time.
Reported-by: NMing Lei <ming.lei@redhat.com>
Fix: 5a85071c(md: use a separate bio_set for synchronous IO.)
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

md devices allocate a bio_set and use it for two
distinct purposes.
mddev->bio_set is used to clone bios as part of sending
upper level requests down to lower level devices,
and it is also use for synchronous IO such as superblock
and bitmap updates, and for correcting read errors.

This multiple usage can lead to deadlocks.  It is likely
that cloned bios might be queued for write and to be
waiting for a metadata update before the write can be permitted.
If the cloning exhausted mddev->bio_set, the metadata update
may not be able to proceed.

This scenario has been seen during heavy testing, with lots of IO and
lots of memory pressure.

Address this by adding a new bio_set specifically for synchronous IO.
All synchronous IO goes directly to the underlying device and is not
queued at the md level, so request using entries from the new
mddev->sync_set will complete in a timely fashion.
Requests that use mddev->bio_set will sometimes need to wait
for synchronous IO, but will no longer risk deadlocking that iO.

Also: small simplification in mddev_put(): there is no need to
wait until the spinlock is released before calling bioset_free().
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

bio_clone() is no longer used.
Only bio_clone_bioset() or bio_clone_fast().
This is for the best, as bio_clone() used fs_bio_set,
and filesystems are unlikely to want to use bio_clone().

So remove bio_clone() and all references.
This includes a fix to some incorrect documentation.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

"flags" arguments are often seen as good API design as they allow
easy extensibility.
bioset_create_nobvec() is implemented internally as a variation in
flags passed to __bioset_create().

To support future extension, make the internal structure part of the
API.
i.e. add a 'flags' argument to bioset_create() and discard
bioset_create_nobvec().

Note that the bio_split allocations in drivers/md/raid* do not need
the bvec mempool - they should have used bioset_create_nobvec().
Suggested-by: NChristoph Hellwig <hch@infradead.org>
Reviewed-by: NChristoph Hellwig <hch@infradead.org>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

blk_queue_split() is always called with the last arg being q->bio_split,
where 'q' is the first arg.

Also blk_queue_split() sometimes uses the passed-in 'bs' and sometimes uses
q->bio_split.

This is inconsistent and unnecessary.  Remove the last arg and always use
q->bio_split inside blk_queue_split()
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Credit-to: Javier González <jg@lightnvm.io> (Noticed that lightnvm was missed)
Reviewed-by: NJavier González <javier@cnexlabs.com>
Tested-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The value for spare spot of sb->dev_roles is changed from
MD_DISK_ROLE_FAULTY to MD_DISK_ROLE_SPARE to keep align
with the value when the superblock is firstly created in
userspace.
Signed-off-by: NLidong Zhong <lzhong@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

If mddev_suspend() races with md_write_start() we can deadlock
with mddev_suspend() waiting for the request that is currently
in md_write_start() to complete the ->make_request() call,
and md_write_start() waiting for the metadata to be updated
to mark the array as 'dirty'.
As metadata updates done by md_check_recovery() only happen then
the mddev_lock() can be claimed, and as mddev_suspend() is often
called with the lock held, these threads wait indefinitely for each
other.

We fix this by having md_write_start() abort if mddev_suspend()
is happening, and ->make_request() aborts if md_write_start()
aborted.
md_make_request() can detect this abort, decrease the ->active_io
count, and wait for mddev_suspend().
Reported-by: NNix <nix@esperi.org.uk>
Fix: 68866e42(MD: no sync IO while suspended)
Cc: stable@vger.kernel.org
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

The new per-cpu counter for writes_pending is initialised in
md_alloc(), which is not called by dm-raid.
So dm-raid fails when md_write_start() is called.

Move the initialization to the personality modules
that need it.  This way it is always initialised when needed,
but isn't unnecessarily initialized (requiring memory allocation)
when the personality doesn't use writes_pending.
Reported-by: NHeinz Mauelshagen <heinzm@redhat.com>
Fixes: 4ad23a97 ("MD: use per-cpu counter for writes_pending")
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

The md private helper uuid_equal() collides with a generic helper
of the same name.

Rename the md private helper to md_uuid_equal() and do the same for
md_sb_equal().
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NShaohua Li <shli@kernel.org>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

Commit b685d3d6 "block: treat REQ_FUA and REQ_PREFLUSH as
synchronous" removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...}
definitions.  generic_make_request_checks() however strips REQ_FUA and
REQ_PREFLUSH flags from a bio when the storage doesn't report volatile
write cache and thus write effectively becomes asynchronous which can
lead to performance regressions

Fix the problem by making sure all bios which are synchronous are
properly marked with REQ_SYNC.

CC: linux-raid@vger.kernel.org
CC: Shaohua Li <shli@kernel.org>
Fixes: b685d3d6
CC: stable@vger.kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NShaohua Li <shli@fb.com>

This essentially reverts commit b5470dc5 ("md: resolve external
metadata handling deadlock in md_allow_write") with some adjustments.

Since commit 6791875e ("md: make reconfig_mutex optional for writes
to md sysfs files.") changing array_state to 'active' does not use
mddev_lock() and will not cause a deadlock with md_allow_write(). This
revert simplifies userspace tools that write to sysfs attributes like
"stripe_cache_size" or "consistency_policy" because it removes the need
for special handling for external metadata arrays, checking for EAGAIN
and retrying the write.
Signed-off-by: NArtur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NShaohua Li <shli@fb.com>

1/ If an array has any read-only devices when it is started,
   the array itself must be read-only
2/ A read-only device cannot be added to an array after it is
   started.
3/ Setting an array to read-write should not succeed
   if any member devices are read-only
Reported-and-Tested-by: NNanda Kishore Chinnaram <Nanda_Kishore_Chinna@dell.com>
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

md allows a new array device to be created by simply
opening a device file.  This make it difficult to
remove the device and udev is likely to open the device file
as part of processing the REMOVE event.

There is an alternate mechanism for creating arrays
by writing to the new_array module parameter.
When using tools that work with this parameter, it is
best to disable the old semantics.
This new module parameter allows that.
Signed-off-by: NNeilBrown <neilb@suse.com>
Acted-by: NColy Li <colyli@suse.de>
Signed-off-by: NShaohua Li <shli@fb.com>

The intention when creating the "new_array" parameter and the
possibility of having array names line "md_HOME" was to transition
away from the old way of creating arrays and to eventually only use
this new way.

The "old" way of creating array is to create a device node in /dev
and then open it.  The act of opening creates the array.
This is problematic because sometimes the device node can be opened
when we don't want to create an array.  This can easily happen
when some rule triggered by udev looks at a device as it is being
destroyed.  The node in /dev continues to exist for a short period
after an array is stopped, and opening it during this time recreates
the array (as an inactive array).

Unfortunately no clear plan for the transition was created.  It is now
time to fix that.

This patch allows devices with numeric names, like "md999" to be
created by writing to "new_array".  This will only work if the minor
number given is not already in use.  This will allow mdadm to
support the creation of arrays with numbers > 511 (currently not
possible) by writing to new_array.
mdadm can, at some point, use this approach to create *all* arrays,
which will allow the transition to only using the new-way.
Signed-off-by: NNeilBrown <neilb@suse.com>
Acted-by: NColy Li <colyli@suse.de>
Signed-off-by: NShaohua Li <shli@fb.com>

md.c: it needs to release the mddev lock before
the array_size_store() returns.

Fixes: ab5a98b1 ("md-cluster: change array_sectors and update size are not supported")
Signed-off-by: NZhilong Liu <zlliu@suse.com>
Reviewed-by: NGuoqing Jiang <gqjiang@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

if called md_set_readonly and set MD_CLOSING bit, the mddev cannot
be opened any more due to the MD_CLOING bit wasn't cleared. Thus it
needs to be cleared in md_ioctl after any call to md_set_readonly()
or do_md_stop().
Signed-off-by: NNeilBrown <neilb@suse.com>
Fixes: af8d8e6f ("md: changes for MD_STILL_CLOSED flag")
Cc: stable@vger.kernel.org (v4.9+)
Signed-off-by: NZhilong Liu <zlliu@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

The 'writes_pending' counter is used to determine when the
array is stable so that it can be marked in the superblock
as "Clean".  Consequently it needs to be updated frequently
but only checked for zero occasionally.  Recent changes to
raid5 cause the count to be updated even more often - once
per 4K rather than once per bio.  This provided
justification for making the updates more efficient.

So we replace the atomic counter a percpu-refcount.
This can be incremented and decremented cheaply most of the
time, and can be switched to "atomic" mode when more
precise counting is needed.  As it is possible for multiple
threads to want a precise count, we introduce a
"sync_checker" counter to count the number of threads
in "set_in_sync()", and only switch the refcount back
to percpu mode when that is zero.

We need to be careful about races between set_in_sync()
setting ->in_sync to 1, and md_write_start() setting it
to zero.  md_write_start() holds the rcu_read_lock()
while checking if the refcount is in percpu mode.  If
it is, then we know a switch to 'atomic' will not happen until
after we call rcu_read_unlock(), in which case set_in_sync()
will see the elevated count, and not set in_sync to 1.
If it is not in percpu mode, we take the mddev->lock to
ensure proper synchronization.

It is no longer possible to quickly check if the count is zero, which
we previously did to update a timer or to schedule the md_thread.
So now we do these every time we decrement that counter, but make
sure they are fast.

mod_timer() already optimizes the case where the timeout value doesn't
actually change.  We leverage that further by always rounding off the
jiffies to the timeout value.  This may delay the marking of 'clean'
slightly, but ensure we only perform atomic operation here when absolutely
needed.

md_wakeup_thread() current always calls wake_up(), even if
THREAD_WAKEUP is already set.  That too can be optimised to avoid
calls to wake_up().
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

If ->in_sync is being set just as md_write_start() is being called,
it is possible that set_in_sync() won't see the elevated
->writes_pending, and md_write_start() won't see the set ->in_sync.

To close this race, re-test ->writes_pending after setting ->in_sync,
and add memory barriers to ensure the increment of ->writes_pending
will be seen by the time of this second test, or the new ->in_sync
will be seen by md_write_start().

Add a spinlock to array_state_show() to ensure this temporary
instability is never visible from userspace.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

Three separate places in md.c check if the number of active
writes is zero and, if so, sets mddev->in_sync.

There are a few differences, but there shouldn't be:
- it is always appropriate to notify the change in
  sysfs_state, and there is no need to do this outside a
  spin-locked region.
- we never need to check ->recovery_cp.  The state of resync
  is not relevant for whether there are any pending writes
  or not (which is what ->in_sync reports).

So create set_in_sync() which does the correct tests and
makes the correct changes, and call this in all three
places.

Any behaviour changes here a minor and cosmetic.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

We use md_write_start() to increase the count of pending writes, and
md_write_end() to decrement the count.  We currently count bios
submitted to md/raid5.  Change it count stripe_heads that a WRITE bio
has been attached to.

So now, raid5_make_request() calls md_write_start() and then
md_write_end() to keep the count elevated during the setup of the
request.

add_stripe_bio() calls md_write_start() for each stripe_head, and the
completion routines always call md_write_end(), instead of only
calling it when raid5_dec_bi_active_stripes() returns 0.
make_discard_request also calls md_write_start/end().

The parallel between md_write_{start,end} and use of bi_phys_segments
can be seen in that:
 Whenever we set bi_phys_segments to 1, we now call md_write_start.
 Whenever we increment it on non-read requests with
   raid5_inc_bi_active_stripes(), we now call md_write_start().
 Whenever we decrement bi_phys_segments on non-read requsts with
    raid5_dec_bi_active_stripes(), we now call md_write_end().

This reduces our dependence on keeping a per-bio count of active
stripes in bi_phys_segments.

md_write_inc() is added which parallels md_write_start(), but requires
that a write has already been started, and is certain never to sleep.
This can be used inside a spinlocked region when adding to a write
request.
Signed-off-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

Since we have switched to sync way to handle METADATA_UPDATED
msg for md-cluster, then process_metadata_update is depended
on mddev->thread->wqueue.

With the new change, clustered raid could possible hang if
array received a METADATA_UPDATED msg after array unregistered
mddev->thread, so we need to stop clustered raid (bitmap_destroy
-> bitmap_free -> md_cluster_stop) earlier than unregister
thread (mddev_detach -> md_unregister_thread).

And this change should be safe for non-clustered raid since
all writes are stopped before the destroy. Also in md_run,
we activate the personality (pers->run()) before activating
the bitmap (bitmap_create()). So it is pleasingly symmetric
to stop the bitmap (bitmap_destroy()) before stopping the
personality (__md_stop() calls pers->free()), we achieve this
by move bitmap_destroy to the beginning of __md_stop.

But we don't want to break the codes for waiting behind IO as
Shaohua mentioned, so introduce bitmap_wait_behind_writes to
call the codes, and call the new fun in both mddev_detach and
bitmap_destroy, then we will not break original behind IO code
and also fit the new condition well.
Signed-off-by: NGuoqing Jiang <gqjiang@suse.com>
Signed-off-by: NShaohua Li <shli@fb.com>

Allow writing to 'consistency_policy' attribute when the array is
active. Add a new function 'change_consistency_policy' to the
md_personality operations structure to handle the change in the
personality code. Values "ppl" and "resync" are accepted and
turn PPL on and off respectively.

When enabling PPL its location and size should first be set using
'ppl_sector' and 'ppl_size' attributes and a valid PPL header should be
written at this location on each member device.

Enabling or disabling PPL is performed under a suspended array.  The
raid5_reset_stripe_cache function frees the stripe cache and allocates
it again in order to allocate or free the ppl_pages for the stripes in
the stripe cache.
Signed-off-by: NArtur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: NShaohua Li <shli@fb.com>