- 25 9月, 2008 16 次提交
-
-
由 Yoichi Yuasa 提交于
release_irq label is only used when ALLOW_DMA is defined. drivers/net/cs89x0.c: In function 'net_open': drivers/net/cs89x0.c:1401: warning: label 'release_irq' defined but not used Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Adrian Bunk 提交于
hso_serial_common_free() mustn't be called if hso_serial_common_create() fails. Reported-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Krzysztof Halasa 提交于
WAN: fixes a NULL dereference in hdlc_x25. Reported-by: Adrian Bunk <bunk@kernel.org>. Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Vlad Yasevich 提交于
IPv6 all-node-multicasts and DAD probes should not be tx-balanced on ALB/TLB bonds. The all-node-multicast is an equivalent to IPv4 broadcasts. DAD probes have to be sent only on the primary so that we don't get false-positive detections. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Matthew Wilcox 提交于
Lockdep warns about the mdio_lock taken with interrupts enabled then later taken from interrupt context. Initially, I considered changing these to spin_lock_irq/spin_unlock_irq, but then I looked at atl1e_phy_init() and saw that it calls msleep(). Sleeping while holding a spinlock is not allowed either. In the probe path, we haven't registered the interrupt handler, so it can't poke at this card yet. It's before we call register_netdev(), so I don't think any other threads can reach this card either. If I'm right, we don't need a spinlock at all. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Hannes Hering 提交于
The ehea busmap must be allocated only once in the first of many calls of the ehea_create_busmap_callback. Signed-off-by: NHannes Hering <hering2@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 David Fries 提交于
A call to pnp_stop_dev and pnp_start_dev now shuts down and initializes plug and play devices for suspend and resume. Signed-off-by: NDavid Fries <david@fries.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Martin Gebert 提交于
Seems like the spinlock for the AU1x00 ethernet device is initialised too late, as it is already used in enable_mac(), which is called via mii_probe() before the init takes place. The attached patch is working here for a Linux Au1100 2.6.22.6 kernel, and as far as I checked should also be applicable to the current head (just line numbers differ). Signed-off-by: NMartin Gebert <Martin.Gebert@alpha-bit.de> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Chris Snook 提交于
Jie Yang at Atheros is getting more directly involved with upstream work on the atl* drivers. This patch changes the ATL1 entry to ATLX (atl2 support posted to netdev today) and adds him as a maintainer. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Andrew Morton 提交于
sparc32 allmodconfig with linux-next: drivers/net/mlx4/alloc.c: In function 'mlx4_buf_alloc': drivers/net/mlx4/alloc.c:164: error: 'PAGE_KERNEL' undeclared (first use in this function) drivers/net/mlx4/alloc.c:164: error: (Each undeclared identifier is reported only once drivers/net/mlx4/alloc.c:164: error: for each function it appears in.) this is due to some header shuffle in linux-next. I didn't look to see what it was. I'd sugges that this patch be merged ahead of a linux-next merge to avoid bisection breaks. We strictly only need asm/pgtable.h, but going direct to asm includes always seems grubby. Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Takashi Iwai 提交于
Self-baked macros cause bunch of compile warnings like below: CC [M] drivers/net/skfp/pmf.o CC net/ipv4/fib_semantics.o drivers/net/skfp/pmf.c:86: warning: cast from pointer to integer of different size drivers/net/skfp/pmf.c:87: warning: cast from pointer to integer of different size ... Use the standard offsetof() macro instead. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Acked-by: NAlan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Magnus Damm 提交于
Commit 15919886 added SMC_IO_SHIFT platform data support. After that ARM board support was added. The default case is still missing though, so on SuperH SMC_IO_SHIFT is constantly zero regardless of what you pass as platform data. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Test-by: NLuca Santini <luca.santini@spesonline.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Magnus Damm 提交于
Commit c4f0e767 added nowait platform data support. The printout code was however not updated, so the value of SMC_NOWAIT is still used. This patch makes sure that nowait is printed accordingly to platform data. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Francois Romieu 提交于
- the register is defined for the 8169 chipset only and there is no 8169 beyond RTL_GIGA_MAC_VER_06. - only the lower 3 bytes of the register are valid Fixes: 1. http://bugzilla.kernel.org/show_bug.cgi?id=10180 2. http://bugzilla.kernel.org/show_bug.cgi?id=11062 (bits of) Tested by Hermann Gausterer and Adam Huffman. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Sebastien Dugue 提交于
Fix typo in ehea_h_query_ehea() which prevents building when DEBUG is on. Signed-off-by: NSebastien Dugue <sebastien.dugue@bull.net> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Thomas Bogendoerfer 提交于
The de2104x did a pci_disable_device() in it's close function, but the open function never does a pci_enable_device() and assumes that the device is already enabled. Considering that downing the interface is just a temporary thing the pci_disable_device() isn't a pretty good idea and removing it from the close function just fixes the bug. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 24 9月, 2008 2 次提交
-
-
由 David S. Miller 提交于
Reported by Thomas Graf. If we don't unlink the SKB from the queue when we send it out in aoenet_xmit(), dev_hard_start_xmit() will see skb->next as non-NULL and interpret this to mean the SKB is part of a GSO segment list. Add __skb_unlink() call to fix that. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Hartkopp 提交于
This patch adds a usage documentation for the virtual CAN driver (vcan). Signed-off-by: NOliver Hartkopp <oliver@hartkopp.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2008 22 次提交
-
-
由 David S. Miller 提交于
We must check tcp_skb_is_last() before doing a tcp_write_queue_next(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
tcp_write_queue_next() must only be made if we know that tcp_skb_is_last() evaluates to false. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
The current check wrongly uses the state of one (currently the first) tx queue for all tx queues in case of non-default qdiscs. This check mainly prevented requeuing loop with __netif_schedule(), but now it's controlled inside __qdisc_run(), while dequeuing. The wrongness of this check was first noticed by Herbert Xu. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
These will be used by TCP write queue handling and elsewhere. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
A lot of code wants to iterate over an SKB queue at the top level using it's own control structure and iterator scheme. Provide skb_queue_next(), which is only valid to invoke if skb_queue_is_last() returns false. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Several bits of code want to know "is this the last SKB in a queue", and all of them implement this by hand. Provide an common interface to make this check. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
Check in dequeue_skb() the state of tx_queue for requeued skb to save on locking and re-requeuing, and possibly remove the current check in qdisc_run(). Based on the idea of Alexander Duyck. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
There is no reason to call into the complicated qdiscs just to remember the last SKB where we found the device blocked. The SKB is outside of the qdiscs realm at this point. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The idea is that we can use this to get rid of ->requeue(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Handle the case of head being non-empty, by adding list->qlen to head->qlen instead of using direct assignment. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This patch add support for keeping an additional character alias associated with an network interface. This is useful for maintaining the SNMP ifAlias value which is a user defined value. Routers use this to hold information like which circuit or line it is connected to. It is just an arbitrary text label on the network device. There are two exposed interfaces with this patch, the value can be read/written either via netlink or sysfs. This could be maintained just by the snmp daemon, but it is more generally useful for other management tools, and the kernel is good place to act as an agreed upon interface to store it. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Remi Denis-Courmont 提交于
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Remi Denis-Courmont 提交于
When there is no listener socket for a received packet, send an error back to the sender. Signed-off-by: NRemi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-