- 16 8月, 2016 3 次提交
-
-
由 Yuval Mintz 提交于
This patch touches various prints in the driver - it reduces the verbosity of some prints [which were previously logged by default] while adding several new debug prints and modifying others. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Change qed* code in trivial manner; This isn't necessarily semantic-only, but the end result is the same, i.e., no change should occur from user perspective. Changes include: - Using temporary variables to better fit 80-character restrictions. - Removal of unused variables & code with no effect. [plus some additional minor modifications]. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Make semantic-only adjustments to qed* drivers, such as: - Changes in code indentation. - Usage of BIT() macro. - re-naming of variables. - Re-ordering of variable declerations. - Removal of (== 0) and (!= 0) in conditions. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 8月, 2016 1 次提交
-
-
由 Wei Yongjun 提交于
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Signed-off-by: NWei Yongjun <weiyj.lk@gmail.com> Acked-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 8月, 2016 2 次提交
-
-
由 Wei Yongjun 提交于
Fix to return error code -EINVAL instead of 0 when EQ elements is too larger, as done elsewhere in this function. Signed-off-by: NWei Yongjun <weiyj.lk@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 xypron.glpk@gmx.de 提交于
Do not write random bytes from the kernel stack when calling qed_wr. Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 7月, 2016 1 次提交
-
-
由 Yuval Mintz 提交于
Driver uses reverse logic when checking if minimum bandwidth configuration applied, causing it to configure the guarantee only on the first hw-function. Fixes: a0d26d5a ("qed*: Don't reset statistics on inner reload") Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 6月, 2016 1 次提交
-
-
由 Sudarsana Reddy Kalluru 提交于
This patch adds support for configuring the device tx/rx coalescing timeout values in the order of micro seconds. It also adds APIs for upper layer drivers for reading/updating the coalescing values. Signed-off-by: NSudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 6月, 2016 3 次提交
-
-
由 Yuval Mintz 提交于
RoCE and iSCSI would require some added/changed hw configuration in order to properly run; The biggest single change being the requirement of allocating and mapping host memory for several HW blocks that aren't being used by qede [SRC, QM, TM, etc.]. In addition, whereas qede is only using context memory for HW blocks, the new protocol would also require task memories to be added. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
This patch adds in the ecore 2 new personalities in addition to QED_PCI_ETH - QED_PCI_ISCSI and QED_PCI_ETH_ROCE. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
RoCE driver is going to need a 32-bit chain [current chain implementation for qed* currently supports only 16-bit producer/consumer chains]. This patch adds said support, as well as doing other slight tweaks and modifications to qed's chain API. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 6月, 2016 1 次提交
-
-
由 Yuval Mintz 提交于
The New QED firmware contains several fixes, including: - Wrong classification of packets in 4-port devices. - Anti-spoof interoperability with encapsulated packets. - Tx-switching of encapsulated packets. It also slightly improves Tx performance of the device. In addition, this firmware contains the necessary logic for supporting iscsi & rdma, for which we plan on pushing protocol drivers in the imminent future. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 5月, 2016 5 次提交
-
-
由 Yuval Mintz 提交于
Currently 100g devices don't support minimum/maximum BW configurations, yet link flaps might cause the driver to attempt to do such a configuration. Prevent this just as we do for the maximum BW. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sudarsana Reddy Kalluru 提交于
Adapter can support 100g in both MSIx and INTa, but not in MSI. Signed-off-by: NSudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Some of the HW configurations are currently missing for 100g devices. This can cause various classification issues, as well as prevent device from fully reaching line-rate. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
When DCBx re-negotiation is occurring, the PF's configurations for maximum and minimum bandwidth guarantees are currently lost. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sudarsana Reddy Kalluru 提交于
Commit 39651abd ("qed: add support for dcbx") is re-configuring the QM hw-block as part of its sequence. This is done in attention handling context which is non-sleepable, yet memory is allocated in this flow using GFP_KERNEL. Signed-off-by: NSudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2016 1 次提交
-
-
由 Sudarsana Reddy Kalluru 提交于
This patch adds the necessary driver support for Management Firmware to configure the device/firmware with the dcbx results. Management Firmware is responsible for communicating the DCBX and driving the negotiation, but the driver has responsibility of receiving async notification and configuring the results in hw/fw. This patch also adds the dcbx support for future protocols (e.g., FCoE) as preparation to their imminent submission. Signed-off-by: NSudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 5月, 2016 7 次提交
-
-
由 Yuval Mintz 提交于
Device should be configured by default to VEB once VFs are active. This changes the configuration of both PFs' and VFs' vports into enabling tx-switching once sriov is enabled. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
This adds support in 2 ndo that allow PF to tweak the VF's view of the link - `ndo_set_vf_link_state' to allow it a view independent of the PF's, and `ndo_set_vf_rate' which would allow the PF to limit the VF speed. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
This adds support for PF control over the VF vlan configuration. I.e., `ip link ... vf <x> vlan <vid>' should now be supported. 1. <vid> != 0 => VF receives [unknowingly] only traffic tagged by <vid> and tags all outgoing traffic sent by VF with <vid>. 2. <vid> == 0 ==> Remove the pvid configuration, reverting to previous. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
This adds sufficient changes to allow VFs l2-configuration flows to work. While the fastpath of the VF and the PF are meant to be exactly the same, the configuration of the VF is done by the PF. This diverges all VF-related configuration flows that originate from a VF, making them pass through the VF->PF channel and adding sufficient logic on the PF side to support them. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
While previous patches have already added the necessary logic to probe VFs as well as enabling them in the HW, this patch adds the ability to support VF FLR & SRIOV disable. It then wraps both flows together into the first IOV callback to be provided to the protocol driver - `configure'. This would later to be used to enable and disable SRIOV in the adapter. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
This adds the qed VFs for the first time - The vfs are limited functions, with a very different PCI bar structure [when compared with PFs] to better impose the related security demands associated with them. This patch includes the logic neccesary to allow VFs to successfully probe [without actually adding the ability to enable iov]. This includes diverging all the flows that would occur as part of the pci probe of the driver, preventing VF from accessing registers/memories it can't and instead utilize the VF->PF channel to query the PF for needed information. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Add support for a new Kconfig option for qed* driver which would allow [eventually] the support in VFs. This patch adds the necessary logic in the PF to learn about the possible VFs it will have to support [Based on PCI configuration space and HW], and prepare a database with an entry per-VF as infrastructure for future interaction with said VFs. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 4月, 2016 3 次提交
-
-
由 Manish Chopra 提交于
This patch adds support for PF minimum bandwidth update or configuration notified by management firmware. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
This patch adds support for PF maximum bandwidth update or configuration notified by management firmware. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
This patch adds relevant APIs needed to configure WFQ (Weighted fair queueing) values for the vports. WFQ configuration is used per vport basis when minimum bandwidth update/configuration is notified to the PF by the management firmware. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2016 1 次提交
-
-
由 Manish Chopra 提交于
This patch adds various structure/APIs needed to configure/enable different tunnel [VXLAN/GRE/GENEVE] parameters on the adapter. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 3月, 2016 5 次提交
-
-
由 Yuval Mintz 提交于
Remove 2 unused fields from driver code. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
In case of problems when initializing the chip, the error flows aren't being properly done. Specifically, it's possible that the chip would be left in a configuration allowing it [internally] to access the host memory, causing fatal problems in the device that would require power cycle to overcome. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
Current statistics logic is meant for L2, not for all future protocols. Move this content to the proper designated file. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
BB_A0 is a development model that is will not reach actual clients. In fact, future firmware would simply fail to initialize such chip. This changes the configuration into B0 instead of A0, and adds a safeguard against the slim chance someone would actually try this with an A0 adapter in which case probe would gracefully fail. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ram Amrani 提交于
Driver learns the inner bar sized from a register configured by management firmware, but older versions are not setting this register. But since we know which values were configured back then, use them instead. Signed-off-by: NRam Amrani <Ram.Amrani@qlogic.com> Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 3月, 2016 1 次提交
-
-
由 Yuval Mintz 提交于
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 2月, 2016 1 次提交
-
-
由 Yuval Mintz 提交于
Initial driver submission used GFP_ATOMIC almost inclusively when allocating memory. We now remedy this point, using GFP_KERNEL where it's possible. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 2月, 2016 1 次提交
-
-
由 Yuval Mintz 提交于
This patch moves the qed* driver into utilizing the 8.7.3.0 FW. This new FW is required for a lot of new SW features, including: - Vlan filtering offload - Encapsulation offload support - HW ingress aggregations As well as paving the way for the possibility of adding storage protocols in the future. V2: - Fix kbuild test robot error/warnings. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 12月, 2015 1 次提交
-
-
由 Ariel Elior 提交于
Can't rely on pci config space to discover bar size, as in some environments this returns a wrong, too large value. Instead, rely on device register, which contains the value provided by MFW at preboot. Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com> Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 11月, 2015 1 次提交
-
-
由 Dan Carpenter 提交于
We accidentally return success instead of -ENOMEM here. Fixes: fe56b9e6 ('qed: Add module with basic common support') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 11月, 2015 1 次提交
-
-
由 Dan Carpenter 提交于
MODE_MF_SI is 9. We should be testing bit 9 instead of AND 0x9. Fixes: fe56b9e6 ('qed: Add module with basic common support') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-