This change makes the rtc on the exynos5250 and 5440 disabled by
default to match exynos4.

Ever since the common clock framework came in, exynos5250 boards
have dumped lots of warnings in the boot log. It turns out that
we don't see those on exynos4 since the rtc is disabled by default.
While we need to get to the bottom of the problems with the RTC,
it still makes sense to have the default state of the RTC on exynos
boards match.

For the record, warnings look like this:
  ------------[ cut here ]------------
  WARNING: at drivers/clk/clk.c:771 __clk_enable+0x34/0xb0()
  Modules linked in:
  [<80015bfc>] (unwind_backtrace+0x0/0xec) from [<804717f0>] (dump_stack+0x20/0x24)
  [<804717f0>] (dump_stack+0x20/0x24) from [<80023cd0>] (warn_slowpath_common+0x5c/0x7c)
  [<80023cd0>] (warn_slowpath_common+0x5c/0x7c) from [<80023d1c>] (warn_slowpath_null+0x2c/0x34)
  [<80023d1c>] (warn_slowpath_null+0x2c/0x34) from [<8035ddb0>] (__clk_enable+0x34/0xb0)
  [<8035ddb0>] (__clk_enable+0x34/0xb0) from [<8035de54>] (clk_enable+0x28/0x3c)
  [<8035de54>] (clk_enable+0x28/0x3c) from [<8031a160>] (s3c_rtc_probe+0xf4/0x434)
  [<8031a160>] (s3c_rtc_probe+0xf4/0x434) from [<8028e288>] (platform_drv_probe+0x24/0x28)
  [<8028e288>] (platform_drv_probe+0x24/0x28) from [<8028ce10>] (driver_probe_device+0xbc/0x22c)
  [<8028ce10>] (driver_probe_device+0xbc/0x22c) from [<8028cff8>] (__driver_attach+0x78/0x9c)
  [<8028cff8>] (__driver_attach+0x78/0x9c) from [<8028bdfc>] (bus_for_each_dev+0x64/0xac)
  [<8028bdfc>] (bus_for_each_dev+0x64/0xac) from [<8028c7e0>] (driver_attach+0x28/0x30)
  [<8028c7e0>] (driver_attach+0x28/0x30) from [<8028c43c>] (bus_add_driver+0xe0/0x234)
  [<8028c43c>] (bus_add_driver+0xe0/0x234) from [<8028d55c>] (driver_register+0xac/0x13c)
  [<8028d55c>] (driver_register+0xac/0x13c) from [<8028e4f4>] (platform_driver_register+0x54/0x68)
  [<8028e4f4>] (platform_driver_register+0x54/0x68) from [<8065c944>] (s3c_rtc_driver_init+0x14/0x1c)
  [<8065c944>] (s3c_rtc_driver_init+0x14/0x1c) from [<800086d8>] (do_one_initcall+0x60/0x138)
  [<800086d8>] (do_one_initcall+0x60/0x138) from [<80633a8c>] (kernel_init_freeable+0x108/0x1d0)
  [<80633a8c>] (kernel_init_freeable+0x108/0x1d0) from [<8046d2f8>] (kernel_init+0x1c/0xf4)
  [<8046d2f8>] (kernel_init+0x1c/0xf4) from [<8000e358>] (ret_from_fork+0x14/0x20)
  ---[ end trace 4bcdc801c868d73f ]---
Signed-off-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

This merges in the revert of multiplatform support for exynos.

Trivial conflicts on removed code. Also, needed to add "select COMMON_CLK"
to the non-multiplatform EXYNOS config option.

* samsung/exynos-multiplatform:
  Revert "ARM: exynos: enable multiplatform support"
Signed-off-by: NOlof Johansson <olof@lixom.net>

This reverts commit bd51de53.

Turns out that multiplatform breaks some uses cases, such as when you
have an existing defconfig, since it adds the new EXYNOS_SINGLE config
option as a dependecy. As a result, nearly all exynos config options
will be disabled by default.

Reverting instead of rebasing since this branch is pulled in as a
dependency elsewhere.
Signed-off-by: NOlof Johansson <olof@lixom.net>

commit 688f7d8c ("clk: exynos5250: Fix divider values for
sclk_mmc{0,1,2,3}") incorrectly sets the divider for sclk_mmc{0,1,2,3}
to fix the wrong clock value. Though this fixed issue with Arndale,
it created regressions for other boards like Snow.

On Exynos5250, sclk_mmc<n> is generated like below (as per the clock
names in drivers/clk/samsung/clk-exynos5250.c)

mout_group1_p ==> mout_mmc<n> ==>
		div_mmc<n> ==> div_mmc_pre<n> => sclk_mmc<n>

Earlier div_mmc<n> was set as the parent for sclk_mmc<n>, hence
div_mmc_pre<n> was not getting referred in kernel code and depending
on its value set during preboot, sclk_mmc<n> value was different for
various boards.

Setting the correct clock generation path should fix the issues
reported in above referenced commit. The changes committed during the
earlier patch has also been reverted here.
Reported-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Tested-by: NDoug Anderson <dianders@chromium.org>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Commit 6e6aac75 "ARM: EXYNOS: Migrate clock support to common
clock framework" from Thomas Abraham removed the Exynos5 specific
register definitions as they were unused at the time, but the
cpufreq driver actually still uses them.

Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

There is currently no alternative implementation for of_irq_count
when the function is not defined, and the declaration is hidden,
so this works around calling an undeclared function. It should
really not be needed.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

pinctrl_register() returns NULL on error.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Acked-by: NTony Prisk <linux@prisktech.co.nz>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merging this into the next/drivers branch avoids a number of
pointless conflicts with code changed here.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This makes it possible to enable the exynos platform as part of a
multiplatform kernel, in addition to keeping the single-platform
exynos support.

The multiplatform variant has a number of limitations at the moment:

* It only supports DT-enabled machines. This is not a problem in
  the long run, as non-DT machines for exynos are going away.
  The main problem here is that the gpio code and the exynos_eint
  irqchip are not multiplatform capable but still required for
  ATAGS based boot.
* The watchdog driver is still missing a conversion.
* sparsemem and memory_holes are currently not supported in
  multiplatform.

The the multiplatform aware ARCH_EXYNOS Kconfig symbol is disabled
for now, as dependent patches are still pending in other
subsystem trees. We will enable it once everything comes together.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Nothing outside of the rtc driver includes plat/regs-rtc.h,
so we can simply move the file into the same directory,
which allows us to build the file as platform-independent
code.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: rtc-linux@googlegroups.com
Cc: Alessandro Zummo <a.zummo@towertech.it>

Nothing uses the NAND register definitions other than the
actual driver, so we can move the header file into the
same local directory, which lets us build it in a multiplatform
configuration.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: linux-mtd@lists.infradead.org
Cc: David Woodhouse <dwmw2@infradead.org>

In multiplatform configurations, we cannot include headers
provided by only the exynos platform. Fortunately a number
of drivers that include those headers do not actually need
them, so we can just remove the inclusions.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NEduardo Valentin <eduardo.valentin@ti.com>
Cc: Zhang Rui <rui.zhang@intel.com>

plat/regs-sdhci.h is not used anywhere but in the sdhci-s3c
driver, so it can become a local file there and all other
inclusions removed.

plat/sdhci.h is used only to define the platform devices,
and with the exception of the platform_data structure not
needed by the driver, so we can split out the platform_data
definition instead and leave the rest to platform code.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NChris Ball <cjb@laptop.org>

For a DT-only build we don't want to compile devs.c, but we do need
the mfc device, which is also referenced by the DT based platforms,
so move it all into one place.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The move is necessary to support early debug output on exynos
with multiplatform configurations. This implies also moving the
plat/debug-macro.S file, but we are leaving the remaining users of that
file in place, to avoid adding large numbers of extra configuration
options to Kconfig.debug
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

When we enable CONFIG_SPARSE_IRQ, we have to set the value of NR_IRQS in
the machine_desc for legacy IRQ domains, and any file referring to the
number of interrupts or a specific number must include the mach/irqs.h
header file explicitly.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

As a preparation for multiplatform support, this introduces
a new Kconfig symbol to split the ATAGS based EXYNOS platforms
from the DT based ones. Turning off CONFIG_EXYNOS_ATAGS disables
all platforms that are not yet converted to DT, and we can
have code that relies on DT checking for this symbol being
disabled.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

From Philipp Zabel, this is a series that adds a simple API for devices
to request being reset by a separate reset controller hardware, and
it implements reset signal device tree bindings.

* 'reset/for_v3.10' of git://git.pengutronix.de/git/pza/linux:
  reset: NULL deref on allocation failure
  reset: Add reset controller API
  dt: describe base reset signal binding
Signed-off-by: NOlof Johansson <olof@lixom.net>

This patch moves the arch-vt8500 irq code to drivers/irqchip and converts
it to use the new IRQCHIP_DECLARE and irqchip_init. This allows the removal
of some more functions from common.h
Signed-off-by: NTony Prisk <linux@prisktech.co.nz>
Signed-off-by: NOlof Johansson <olof@lixom.net>

"rstc" is NULL here and we should use "rcdev" instead of "rstc->rcdev".
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

This adds a simple API for devices to request being reset
by separate reset controller hardware and implements the
reset signal device tree binding.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NStephen Warren <swarren@nvidia.com>
Reviewed-by: NShawn Guo <shawn.guo@linaro.org>
Reviewed-by: NMarek Vasut <marex@denx.de>
Reviewed-by: NPavel Machek <pavel@ucw.cz>

This binding is intended to represent the hardware reset signals present
internally in most IC (SoC, FPGA, ...) designs.
It consists of a binding for a reset controller device (provider), and a
pair of properties, "resets" and "reset-names", to link a device node
(consumer) to its reset controller via phandle, similarly to the clock
and interrupt bindings.

The reset controller has all information necessary to reset the consumer
device. That could be provided via device tree, or it could be implemented
in hardware.
The aim is to enable device drivers to request a framework API to issue a
reset simply by providing their struct device pointer as the most common
case.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NShawn Guo <shawn.guo@linaro.org>
Reviewed-by: NMarek Vasut <marex@denx.de>
Reviewed-by: NPavel Machek <pavel@ucw.cz>
Acked-by: NRob Herring <rob.herring@calxeda.com>

Merge tag 'timer-samsung-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

including fix for GENERIC_GPIO based on previous pull-request for timer-samsung

* tag 'timer-samsung-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: change GENERIC_GPIO to ARCH_REQUIRE_GPIOLIB
Signed-off-by: NArnd Bergmann <arnd@anrdb.de>

Merge tag 'pmu-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

add support arm-pmu for exynos4 and exynos5250

* tag 'pmu-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
  ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
  ARM: EXYNOS: Enable PMUs for exynos4
  irqchip: exynos-combiner: Correct combined IRQs for exynos4
  irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'clk-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

add suppport common clock framework for exynos

* tag 'clk-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (73 commits)
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: exynos5250: register display block gate clocks to common clock framework
  clk: exynos4: Add support for SoC-specific register save list
  clk: exynos4: Add missing registers to suspend save list
  clk: exynos4: Remove E4X12 prefix from SRC_DMC register
  clk: exynos4: Add E4210 prefix to GATE_IP_PERIR register
  clk: exynos4: Add E4210 prefix to LCD1 clock registers
  clk: exynos4: Remove SoC-specific registers from save list
  clk: exynos4: Use SRC_MASK_PERIL{0,1} definitions
  clk: exynos4: Define {E,V}PLL registers
  clk: exynos4: Add missing mout_sata on Exynos4210
  clk: exynos4: Add missing CMU_TOP and ISP clocks
  clk: exynos4: Add G3D clocks
  clk: exynos4: Add camera related clock definitions
  clk: exynos4: Export mout_core clock of Exynos4210
  clk: samsung: Remove unimplemented ops for pll
  clk: exynos4: Export clocks used by exynos cpufreq drivers
  ...

[arnd: add missing #address-cells property in mshc DT node]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

add support exynos mct device tree and move into drivers/clocksource

* tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  clocksource: mct: Add terminating entry for exynos_mct_ids table
  clocksource: mct: Add missing semicolons in exynos_mct.c
  ARM: EXYNOS: move mct driver to drivers/clocksource
  ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5
  ARM: dts: add mct device tree node for all supported Exynos SoC's
  ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init
  ARM: EXYNOS: add device tree support for MCT controller driver
  ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it
  ARM: EXYNOS: add a register base address variable in mct controller driver

Conflicts:
	drivers/clocksource/Makefile
	drivers/clocksource/exynos_mct.c

[arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'irq-s3c24xx-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

From Kukjin Kim <kgene.kim@samsung.com>:

s3c24xx irq cleanup and move into drivers/irqchip

* tag 'irq-s3c24xx-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  irqchip: s3c24xx: add devicetree support
  irqchip: s3c24xx: make interrupt handling independent of irq_domain structure
  irqchip: s3c24xx: globally keep track of the created intc instances
  irqchip: s3c24xx: add irq_set_type callback for basic interrupt types
  irqchip: s3c24xx: fix irqlist of second s3c2416 controller
  irqchip: s3c24xx: fix comments on some camera interrupts
  ARM: S3C24XX: move irq driver to drivers/irqchip
  ARM: S3C24XX: add handle_irq function
  ARM: S3C24XX: make s3c24xx_init_intc static
  ARM: S3C24XX: move s3c24xx_init_irq to s3c2410_init_irq
  ARM: S3C24XX: fix irq parent check
  ARM: S3C24XX: fix redundant checks in the irq mapping function
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'ux500-pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/drivers

From Linus Walleij <linus.walleij@linaro.org>:

ux500 pinctrl updates for the ARM SoC tree.

* tag 'ux500-pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: 8500: add ab8500-musb pinctrl support
  ARM: ux500: remove redundant DB8500_PIN_SLEEP definition
  ARM: ux500: Add Snowball pin configuration for user LED
  ARM: ux500: u8500: fix pinctrl IDLE state definition for SPI2
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-3.10-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/drivers

From Stephen Warren <swarren@wwwdotorg.org>:

ARM: tegra: clock driver development

This branch contains most fixes and enhancements to the Tegra common
clock driver. The main new feature is a driver for Tegra114, which
coupled with later device tree changes enables many devices on that
chip, such as MMC, I2C, etc.

This branch depends on a patch in:

git://git.linaro.org/people/mturquette/linux.git clk-for-3.10

Mike has stated that this branch is stable, and is aware of this
dependency and merge.

Mike's branch is based on v3.9-rc3, which includes a USB change which
causes problems on Tegra. That problem was fixed in v3.9-rc4. Hence,
this branch pulls in v3.9-rc4 to ensure bisectability as much as
possible.

This branch is based on v3.9-rc4, followed by a merge of previous Tegra
"soc" pull request, followed by a merge of clk-for-3.10.

* tag 'tegra-for-3.10-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  clk: tegra: fix enum tegra114_clk to match binding
  clk: tegra: Remove forced clk_enable of uartd
  ARM: dt: Add references to tegra_car clocks
  clk: tegra: devicetree match for nvidia,tegra114-car
  clk: tegra: Implement clocks for Tegra114
  ARM: tegra: Define Tegra114 CAR binding
  clk: tegra: Workaround for Tegra114 MSENC problem
  clk: tegra: Add flags to tegra_clk_periph()
  clk: tegra: Add new fields and PLL types for Tegra114
  clk: tegra: move from a lock bit idx to a lock mask
  clk: tegra: Add PLL post divider table
  clk: tegra: introduce TEGRA_PLL_HAS_LOCK_ENABLE
  clk: tegra: Add TEGRA_PLL_BYPASS flag
  clk: tegra: Refactor PLL programming code
  clk: tegra: provide dummy cpu car ops
  clk: tegra: defer application of init table
  clk: tegra: Fix cdev1 and cdev2 IDs
  clk: tegra: Make gr2d and gr3d clocks children of pll_c
  clk: tegra: Export peripheral reset functions
  clk: tegra: Fix periph_clk_to_bit macro
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This is a snapshot of the stable clk branch at

git://git.linaro.org/people/mturquette/linux.git clk-for-3.10

which is a dependency for the tegra clock changes.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This is a dependency for the tegra/clk branch.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Conflicts:
	drivers/clocksource/tegra20_timer.c

Merge tag 'omap-for-v3.10/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

From Tony Lindgren <tony@atomide.com>:

GPMC updates from Jon Hunter <jon-hunter@ti.com>:

Adds GPMC (General Purpose Memory Controller) DT support for
NOR flash and Ethernet and includes various GPMC cleans-up
and fixes.

This series is dependent on commit 71856843 (ARM: OMAP: use
consistent error checking) from RMK's clean-up branch and commit
31d9adca (ARM: OMAP2+: Fix broken gpmc support).

* tag 'omap-for-v3.10/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (29 commits)
  ARM: OMAP2+: Add GPMC DT support for Ethernet child nodes
  ARM: OMAP2+: rename gpmc_probe_nor_child() to gpmc_probe_generic_child()
  ARM: OMAP2+: return -ENODEV if GPMC child device creation fails
  ARM: OMAP2+: Allow GPMC probe to complete even if CS mapping fails
  ARM: OMAP2+: Remove unnecesssary GPMC definitions and variable
  ARM: OMAP2+: Detect incorrectly aligned GPMC base address
  ARM: OMAP2+: Convert ONENAND to retrieve GPMC settings from DT
  ARM: OMAP2+: Convert NAND to retrieve GPMC settings from DT
  ARM: OMAP2+: Add device-tree support for NOR flash
  ARM: OMAP2+: Add additional GPMC timing parameters
  ARM: OMAP2+: Add function to read GPMC settings from device-tree
  ARM: OMAP2+: Don't configure of chip-select options in gpmc_cs_configure()
  ARM: OMAP2+: Convert TUSB to use gpmc_cs_program_settings()
  ARM: OMAP2+: Convert SMC91x to use gpmc_cs_program_settings()
  ARM: OMAP2+: Convert NAND to use gpmc_cs_program_settings()
  ARM: OMAP2+: Convert ONENAND to use gpmc_cs_program_settings()
  ARM: OMAP2+: Add function for configuring GPMC settings
  ARM: OMAP2+: Add structure for storing GPMC settings
  ARM: OMAP2+: Add variable to store number of GPMC waitpins
  ARM: OMAP2+: Simplify code configuring ONENAND devices
  ...
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v3.10/timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

From Tony Lindgren <tony@atomide.com>:

Clean-up for omap2+ timers from Jon Hunter <jon-hunter@ti.com>:

This series consists mainly of clean-ups for clockevents and
clocksource timers on OMAP2+ devices. The most significant change
in functionality comes from the 5th patch which is changing the
selection of the clocksource timer for OMAP3 and AM335x devices
when gptimers are used for clocksource.

Note that this series depends on 71856843 (ARM: OMAP: use
consistent error checking) in RMK's tree and 960cba67 (ARM:
OMAP5: timer: Update the clocksource name as per clock data)
in omap-for-v3.10/fixes-non-critical. So this branch is based
on a merge of 71856843 and omap-for-v3.10/fixes-non-critical
to avoid non-trivial merge conflicts.

* tag 'omap-for-v3.10/timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4+: Fix sparse warning in system timers
  ARM: OMAP2+: Store ID of system timers in timer structure
  ARM: OMAP3: Update clocksource timer selection
  ARM: OMAP2+: Simplify system timers definitions
  ARM: OMAP2+: Simplify system timer clock definitions
  ARM: OMAP2+: Remove hard-coded test on timer ID
  ARM: OMAP2+: Display correct system timer name
  ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"
  ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"
  ARM: OMAP: dpll: enable bypass clock only when attempting dpll bypass
  ARM: OMAP2+: powerdomain: avoid testing whether an unsigned char is less than 0
  ARM: OMAP2+: hwmod: Remove unused _HWMOD_WAKEUP_ENABLED flag
  ARM: OMAP2+: am335x: Change the wdt1 func clk src to per_32k clk
  ARM: OMAP2+: AM33xx: hwmod: Add missing sysc definition to wdt1 entry
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v3.10/usb-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

From Tony Lindgren <tony@atomide.com>:

EHCI platform data related changes for v3.10 merge window.
These are needed for the USB PHY support, and are based on
commit 1f0972f5 from Felipe Balbi's tree as agreed on the
mailing lists.

* tag 'omap-for-v3.10/usb-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
  ARM: dts: omap3-beagle: Add USB Host support
  ARM: dts: OMAP3: Add HS USB Host IP nodes
  ARM: dts: OMAP4: Add HS USB Host IP nodes
  ARM: OMAP: zoom: Adapt to ehci-omap changes
  ARM: OMAP3: overo: Adapt to ehci-omap changes
  ARM: OMAP3: omap3touchbook: Adapt to ehci-omap changes
  ARM: OMAP3: omap3stalker: Adapt to ehci-omap changes
  ARM: OMAP3: omap3pandora: Adapt to ehci-omap changes
  ARM: OMAP3: omap3evm: Adapt to ehci-omap changes
  ARM: OMAP3: igep0020: Adapt to ehci-omap changes
  ARM: OMAP: devkit8000: Adapt to ehci-omap changes
  ARM: OMAP3: cm-t3517: Adapt to ehci-omap changes
  ARM: OMAP3: cm-t35: Adapt to ehci-omap changes
  ARM: OMAP: AM3517evm: Adapt to ehci-omap changes
  ARM: OMAP: AM3517crane: Adapt to ehci-omap changes
  ARM: OMAP3: 3630SDP: Adapt to ehci-omap changes
  ARM: OMAP3: 3430SDP: Adapt to ehci-omap changes
  ARM: OMAP3: Beagle: Adapt to ehci-omap changes
  ARM: OMAP2+: omap4panda: Adapt to ehci-omap changes
  ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys()
  ...
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This patch adds a arm-pmu node to bind device tree for exynos4210.
The exynos4210 and 4212 have two cpus which includes a pmu. In contrast, the
exynos4412 has 4 cpus and pmus. We need to define two more pmus for this type
board. However, supporting arm-pmu for the exynos4412 will handle it later
because there is no dts support for 4412 based board.
Signed-off-by: NChanho Park <chanho61.park@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch enables arm-pmu to bind device tree for exynos5250. The exynos5250
has two pmus which have combiner irq type.
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NChanho Park <chanho61.park@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch defines irq numbers of ARM performance monitoring unit for exynos4.
Firs of all, we need to fix IRQ_PMU correctly and to split pmu initialization
of exynos from plat-samsung for easily defining it.

The number of CPU cores and PMU irq numbers are vary according to soc types.
So, we need to identify each soc type using soc_is_xxx function and to define
the pmu irqs dynamically. For example, the exynos4412 has 4 cpu cores and pmus.
Signed-off-by: NChanho Park <chanho61.park@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch corrects combined IRQs for exynos4 series platform. The exynos4412
has four extra combined irq group and the exynos4212 has two more combined
irqs
than exynos4210. Each irq is mapped to IRQ_SPI(xx). Unfortunately, extra 4
combined IRQs isn't sequential. So, we need to map the irqs manually.
Signed-off-by: NChanho Park <chanho61.park@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: changes moved into drivers/irqchip/]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch adds set_irq_affinity function for combiner_irq. We need this
function to enable a arm-pmu because the pmu of exynos has combined type
irqs.
Reviewed-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NChanho Park <chanho61.park@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: changes moved into drivers/irqchip/]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

From Michal Simek <michal.simek@xilinx.com>:

* 'zynq/clksrc/cleanup' of git://git.xilinx.com/linux-xlnx:
  arm: zynq: Move timer to generic location
  arm: zynq: Do not use xilinx specific function names
  arm: zynq: Move timer to clocksource interface
  arm: zynq: Use standard timer binding
Signed-off-by: NArnd Bergmann <arnd@arndb.de>