kafs doesn't check if the cell already exists - so if you do an echo "add
newcell.org 1.2.3.4" >/proc/fs/afs/cells it will try to create this cell
again.  kobject will also complain about a double registration.  To prevent
such problems, return -EEXIST in that case.
Signed-off-by: NSven Schnelle <svens@stackframe.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a MAINTAINERS record for AFS.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Current nobh_write_end() implementation ignore partial writes(copied < len)
case if page was fully mapped and simply mark page as Uptodate, which is
totally wrong because area [pos+copied, pos+len) wasn't updated explicitly in
previous write_begin call.  It simply contains garbage from pagecache and
result in data leakage.

#TEST_CASE_BEGIN:
~~~~~~~~~~~~~~~~
In fact issue triggered by classical testcase
	open("/mnt/test", O_RDWR|O_CREAT|O_TRUNC, 0666) = 3
	ftruncate(3, 409600)                    = 0
	writev(3, [{"a", 1}, {NULL, 4095}], 2)  = 1
##TESTCASE_SOURCE:
~~~~~~~~~~~~~~~~~
#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <sys/uio.h>
#include <sys/mman.h>
#include <errno.h>
int main(int argc, char **argv)
{
	int fd,  ret;
	void* p;
	struct iovec iov[2];
	fd = open(argv[1], O_RDWR|O_CREAT|O_TRUNC, 0666);
	ftruncate(fd, 409600);
	iov[0].iov_base="a";
	iov[0].iov_len=1;
	iov[1].iov_base=NULL;
	iov[1].iov_len=4096;
	ret = writev(fd, iov, sizeof(iov)/sizeof(struct iovec));
	printf("writev  = %d, err = %d\n", ret, errno);
	return 0;
}
##TESTCASE RESULT:
~~~~~~~~~~~~~~~~~~
[root@ts63 ~]# mount | grep mnt2
/dev/mapper/test on /mnt2 type ext2 (rw,nobh)
[root@ts63 ~]#  /tmp/writev /mnt2/test
writev  = 1, err = 0
[root@ts63 ~]# hexdump -C /mnt2/test

00000000  61 65 62 6f 6f 74 00 00  f0 b9 b4 59 3a 00 00 00  |aeboot.....Y:...|
00000010  20 00 00 00 00 00 00 00  21 00 00 00 00 00 00 00  | .......!.......|
00000020  df df df df df df df df  df df df df df df df df  |................|
00000030  3a 00 00 00 2a 00 00 00  21 00 00 00 00 00 00 00  |:...*...!.......|
00000040  60 c0 8c 00 00 00 00 00  40 4a 8d 00 00 00 00 00  |`.......@J......|
00000050  00 00 00 00 00 00 00 00  41 00 00 00 00 00 00 00  |........A.......|
00000060  74 69 6d 65 20 64 64 20  69 66 3d 2f 64 65 76 2f  |time dd if=/dev/|
00000070  6c 6f 6f 70 30 20 20 6f  66 3d 2f 64 65 76 2f 6e  |loop0  of=/dev/n|
skip..
00000f50  00 00 00 00 00 00 00 00  31 00 00 00 00 00 00 00  |........1.......|
00000f60  6d 6b 66 73 2e 65 78 74  33 20 2f 64 65 76 2f 76  |mkfs.ext3 /dev/v|
00000f70  7a 76 67 2f 74 65 73 74  20 2d 62 34 30 39 36 00  |zvg/test -b4096.|
00000f80  a0 fe 8c 00 00 00 00 00  21 00 00 00 00 00 00 00  |........!.......|
00000f90  23 31 32 30 35 39 35 30  34 30 34 00 3a 00 00 00  |#1205950404.:...|
00000fa0  20 00 8d 00 00 00 00 00  21 00 00 00 00 00 00 00  | .......!.......|
00000fb0  d0 cf 8c 00 00 00 00 00  10 d0 8c 00 00 00 00 00  |................|
00000fc0  00 00 00 00 00 00 00 00  41 00 00 00 00 00 00 00  |........A.......|
00000fd0  6d 6f 75 6e 74 20 2f 64  65 76 2f 76 7a 76 67 2f  |mount /dev/vzvg/|
00000fe0  74 65 73 74 20 20 2f 76  7a 20 2d 6f 20 64 61 74  |test  /vz -o dat|
00000ff0  61 3d 77 72 69 74 65 62  61 63 6b 00 00 00 00 00  |a=writeback.....|
00001000  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

As you can see file's page contains garbage from pagecache instead of zeros.
#TEST_CASE_END

Attached patch:
- Add sanity check BUG_ON in order to prevent incorrect usage by caller,
  This is function invariant because page can has buffers and in no zero
  *fadata pointer at the same time.
- Always attach buffers to page is it is partial write case.
- Always switch back to generic_write_end if page has buffers.
  This is reasonable because if page already has buffer then generic_write_begin
  was called previously.
Signed-off-by: NDmitri Monakhov <dmonakhov@openvz.org>
Reviewed-by: NNick Piggin <npiggin@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Call mm_free_cgroup earlier.  Otherwise a reference due to lazy mm switching
can prevent cgroup removal.
Signed-off-by: NYAMAMOTO Takashi <yamamoto@valinux.co.jp>
Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Discourage people from inappropriately using in_atomic()
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/char/drm/ati_pcigart.c: In function 'drm_ati_pcigart_init':
drivers/char/drm/ati_pcigart.c:125: warning: format '%08X' expects type 'unsigned int', but argument 3 has type 'dma_addr_t'

Cc: Dave Airlie <airlied@linux.ie>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This has been forgotten in commit f5bbdacc ("[MTD] NAND Modularize
read function") and nobody compiled the driver.
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joern Engel <joern@wh.fh-wedel.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I believe http://bugzilla.kernel.org/show_bug.cgi?id=10318 is a false
positive.  There's no way in which networking will be using highmem pages
here, so it won't be taking the KM_USER0 kmap slot, so there's no point in
performing these checks.

Cc: Pawel Staszewski <pstaszewski@artcom.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: NChristoph Lameter <clameter@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
 [ Really sad.  We lose almost all real-life coverage of the debug tests
   with this patch. Now it will only report problems for the cases where
   people actually end up using a HIGHMEM page, not when they just _might_
   use one.    - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Because of a typo in iwch_accept_cr(), the cxgb3 connection handling
code programs the hardware IRD (incoming RDMA read queue depth) with
the value that is passed in for the ORD (outgoing RDMA read queue
depth).  In particular this means that if an application passes in IRD
> 0 and ORD = 0 (which is a completely sane and valid thing to do for
an app that expects only incoming RDMA read requests), then the
hardware will end up programmed with IRD = 0 and the app will fail in
a mysterious way.

Fix this by using "ep->ird" instead of "ep->ord" in the intended place.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix missed hardware breakpoints across multiple threads

Revert commit 1192aeb9 ("ACPI:
drivers/acpi: elide a non-zero test on a result that is never 0")
because it turns out that thermal_cooling_device_register() does
actually return NULL if CONFIG_THERMAL is turned off (then the routine
turns into a dummy inline routine in the header files that returns NULL
unconditionally).

This was found with randconfig testing, causing a crash during bootup:

  initcall 0x78878534 ran for 13 msecs: acpi_button_init+0x0/0x51()
  Calling initcall 0x78878585: acpi_fan_init+0x0/0x2c()
  BUG: unable to handle kernel NULL pointer dereference at 00000000
  IP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd
  *pde = 00000000
  Oops: 0000 [#1]
  Modules linked in:

  Pid: 1, comm: swapper Not tainted (2.6.25-rc7-sched-devel.git-x86-latest.git #14)
  EIP: 0060:[<782b8ad0>] EFLAGS: 00010246 CPU: 0
  EIP is at acpi_fan_add+0x7d/0xfd
  EAX: b787c718 EBX: b787c400 ECX: b782ceb4 EDX: 00000007
  ESI: 00000000 EDI: b787c6f4 EBP: b782cee0 ESP: b782cecc
   DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
  Process swapper (pid: 1, ti=b782c000 task=b7846000 task.ti=b782c000)
  Stack: b787c459 00000000 b787c400 78790888 b787c60c b782cef8 782b6fb8 ffffffda
         b787c60c 00000000 78790958 b782cf0c 783005d7 b787c60c 78790958 78790584
         b782cf1c 783007f6 b782cf28 00000000 b782cf40 782ffc4a 78790958 b794d558
  Call Trace:
   [<782b6fb8>] ? acpi_device_probe+0x3e/0xdb
   [<783005d7>] ? driver_probe_device+0x82/0xfc
   [<783007f6>] ? __driver_attach+0x3a/0x70
   [<782ffc4a>] ? bus_for_each_dev+0x3e/0x60
   [<7830048c>] ? driver_attach+0x14/0x16
   [<783007bc>] ? __driver_attach+0x0/0x70
   [<7830006a>] ? bus_add_driver+0x9d/0x1b0
   [<783008c3>] ? driver_register+0x47/0xa3
   [<7813db00>] ? timespec_to_ktime+0x9/0xc
   [<782b7331>] ? acpi_bus_register_driver+0x3a/0x3c
   [<78878592>] ? acpi_fan_init+0xd/0x2c
   [<78863656>] ? kernel_init+0xac/0x1f9
   [<788635aa>] ? kernel_init+0x0/0x1f9
   [<78114563>] ? kernel_thread_helper+0x7/0x10
   =======================
  Code: 6e 78 e8 57 44 e7 ff 58 e9 93 00 00 00 8b 55 f0 8d bb f4 02 00 00 80 4b 2d 10 8b 03 e8 87 cb ff ff 8d 83 18 03 00 00 80 63 2d ef <ff> 35 00 00 00 00 50 68 e8 9c 6e 78 e8 22 44 e7 ff b9 b6 9c 6e
  EIP: [<782b8ad0>] acpi_fan_add+0x7d/0xfd SS:ESP 0068:b782cecc
  ---[ end trace 778e504de7e3b1e3 ]---
  Kernel panic - not syncing: Attempted to kill init!
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a bug in the powerpc DABR (data access breakpoint) handling,
which can result in us missing breakpoints if several threads are trying
to break on the same address.

The circumstances are that do_page_fault() calls do_dabr(), this clears
the DABR (sets it to 0) and sets up the signal which will report to
userspace that the DABR was hit. The do_signal() code will restore the DABR
value on the way out to userspace.

If we reschedule before calling do_signal(), __switch_to() will check the
cached DABR value and compare it to the new thread's value, if they match
we don't set the DABR in hardware.

So if two threads have the same DABR value, and we schedule from one to
the other after taking the interrupt for the first thread hitting the DABR,
the second thread will run without the DABR set in hardware.

The cleanest fix is to move the cache update into set_dabr(), that way we
can't forget to do it.
Reported-by: NJan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This reverts commit 3811dbf6.

The masking was not at all useless, and it was sensible.  We handle
GFP_ZERO in the caller, and passing it down to any page allocator logic
is buggy and wrong.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: comment documentation update.
  lguest: Don't need comment terminator before disk section.
  lguest: lguest.txt documentation fix
  lguest: Add puppies which where previously missing.
  virtio_pci: unregister virtio device at device remove

Took some cycles to re-read the Lguest Journey end-to-end, fix some
rot and tighten some phrases.

Only comments change.  No new jokes, but a couple of recycled old jokes.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Mention the config options for the Virtio drivers and move the Virtualization
menu to the toplevel.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

lguest doesn't have features, it has puppies!
Signed-off-by: NTimothy R Ansell <mithro@mithis.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Make sure to call unregister_virtio_device() when a virtio device is removed.
Otherwise, virtio_pci.ko cannot be rmmod'd.

This was spotted by Marcelo Tosatti.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] update pasemi_defconfig

Linus noticed a second bug and an uncleanliness:

 - we'd return on any instruction fetch fault

 - we'd use both the value of 16 and the PF_INSTR symbol which are
   the same and make no sense

the cleanup nicely unifies this piece of logic.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  xen: fix UP setup of shared_info
  xen: fix RMW when unmasking events
  x86, documentation: nmi_watchdog=2 works on x86_64
  x86: stricter check in follow_huge_addr()
  rdc321x: GPIO routines bugfixes
  x86: ptrace.c: fix defined-but-unused warnings
  x86: fix prefetch workaround

* 'avr32-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: Fix bug in early resource allocation code
  avr32: Build fix for CONFIG_BUG=n
  avr32: Work around byteswap bug in gcc < 4.2

We need to set up the shared_info pointer once we've mapped the real
shared_info into its fixmap slot.  That needs to happen once the general
pagetable setup has been done.  Previously, the UP shared_info was set
up one in xen_start_kernel, but that was left pointing to the dummy
shared info.  Unfortunately there's no really good place to do a later
setup of the shared_info in UP, so just do it once the pagetable setup
has been done.

[ Stable: needed in 2.6.24.x ]
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

xen_irq_enable_direct and xen_sysexit were using "andw $0x00ff,
XEN_vcpu_info_pending(vcpu)" to unmask events and test for pending ones
in one instuction.

Unfortunately, the pending flag must be modified with a locked operation
since it can be set by another CPU, and the unlocked form of this
operation was causing the pending flag to get lost, allowing the processor
to return to usermode with pending events and ultimately deadlock.

The simple fix would be to make it a locked operation, but that's rather
costly and unnecessary.  The fix here is to split the mask-clearing and
pending-testing into two instructions; the interrupt window between
them is of no concern because either way pending or new events will
be processed.

This should fix lingering bugs in using direct vcpu structure access too.

[ Stable: needed in 2.6.24.x ]
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable <stable@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The first page of the compound page is determined in follow_huge_addr()
but then PageCompound() only checks if the page is part of a compound page.
PageHead() allows checking if this is indeed the first page of the
compound.

Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch fixes the use of GPIO routines which are in the PCI
configuration space of the RDC321x, therefore reading/writing
to this space without spinlock protection can be problematic.

We also now request and free GPIOs and support the MGB100
board, previous code was very AR525W-centric.
Signed-off-by: NVolker Weiss <volker@tintuc.de>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

arch/x86/kernel/ptrace.c:548: warning: 'ptrace_bts_get_size' defined but not used
arch/x86/kernel/ptrace.c:558: warning: 'ptrace_bts_read_record' defined but not used
arch/x86/kernel/ptrace.c:607: warning: 'ptrace_bts_clear' defined but not used
arch/x86/kernel/ptrace.c:617: warning: 'ptrace_bts_drain' defined but not used
arch/x86/kernel/ptrace.c:720: warning: 'ptrace_bts_config' defined but not used
arch/x86/kernel/ptrace.c:788: warning: 'ptrace_bts_status' defined but not used

Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

some early Athlon XP's and Opterons generate bogus faults on prefetch
instructions. The workaround for this regressed over .24 - reinstate it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: drivers/acpi: elide a non-zero test on a result that is never 0
  pnpacpi: reduce printk severity for "pnpacpi: exceeded the max number of ..."
  cpuidle: fix 100% C0 statistics regression
  cpuidle: fix cpuidle time and usage overflow
  ACPI: fix mis-merge -- invoke acpi_unlazy_tlb() only on C3 entry
  ACPI: fix a regression of ACPI device driver autoloading
  ACPI: SBS: remove typo from sbchc.c

The futex init function is called init(). This is a pain in the neck
when debugging when you code dies in ... init :-)

This renames it to futex_init().
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

add_reserved_region() tries to keep the resource list sorted, so when
looking for a place to insert the new resource, it may break out
before the last entry.

When this happens, the list is broken in two because the sibling field
of the new entry doesn't point to the next resource. Fix it by
updating the new resource's sibling field appropriately.
Signed-off-by: NHaavard Skinnemoen <haavard.skinnemoen@atmel.com>

The function thermal_cooling_device_register always returns either a valid
pointer or a value made with ERR_PTR, so a test for non-zero on the result
will always succeed.

The problem was found using the following semantic match.
(http://www.emn.fr/x-info/coccinelle/)

//<smpl>
@a@
expression E, E1;
statement S,S1;
position p;
@@

E = thermal_cooling_device_register(...)
... when != E = E1
if@p (E) S else S1

@n@
position a.p;
expression E,E1;
statement S,S1;
@@

E = NULL
... when != E = E1
if@p (E) S else S1

@depends on !n@
expression E;
statement S,S1;
position a.p;
@@

* if@p (E)
  S else S1
//</smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (43 commits)
  [IPSEC]: Fix BEET output
  [ICMP]: Dst entry leak in icmp_send host re-lookup code (v2).
  [AX25]: Remove obsolete references to BKL from TODO file.
  [NET]: Fix multicast device ioctl checks
  [IRDA]: Store irnet_socket termios properly.
  [UML]: uml-net: don't set IFF_ALLMULTI in set_multicast_list
  [VLAN]: Don't copy ALLMULTI/PROMISC flags from underlying device
  netxen, phy/marvell, skge: minor checkpatch fixes
  S2io: Handle TX completions on the same CPU as the sender for MIS-X interrupts
  b44: Truncate PHY address
  skge napi->poll() locking bug
  rndis_host: fix oops when query for OID_GEN_PHYSICAL_MEDIUM fails
  cxgb3: Fix lockdep problems with sge.reg_lock
  ehea: Fix IPv6 support
  dm9000: Support promisc and all-multi modes
  dm9601: configure MAC to drop invalid (crc/length) packets
  dm9601: add Hirose USB-100 device ID
  Marvell PHY m88e1111 driver fix
  netxen: fix rx dropped stats
  netxen: remove low level tx lock
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Define TASK_SIZE_OF()
  [SPARC64]: flush_ptrace_access() needs preemption disable.
  [SPARC64]: Update defconfig.
  [SPARC64]: Fix allnoconfig build, ptrace.c missing CONFIG_COMPAT checks.
  [SPARC64]: Fix __get_cpu_var in preemption-enabled area.
  [SPARC64]: Fix sparse warnings in arch/sparc64/kernel/signal.c
  [SPARC64]: Fix most sparse warnings in arch/sparc64/kernel/sys_sparc.c
  [SPARC64]: Fix sparse warnings in arch/sparc64/kernel/time.c
  [SPARC64]: Fix sparse warnings in arch/sparc64/kernel/ptrace.c
  [SPARC64]: Fix sparse warnings in arch/sparc64/kernel/irq.c
  [SPARC64]: Fix sparse warnings in arch/sparc64/kernel/iommu.c
  [SPARC64]: Fix sparse errors in arch/sparc64/kernel/traps.c
  [SPARC64]: Fix sparse warnings in arch/sparc64/kernel/{cpu,setup}.c
  [SPARC64]: Adjust {TLBTEMP,TSBMAP}_BASE.
  [SPARC64]: Make save_stack_trace() more efficient.

This make "cat /proc/${PID}/pagemap" more efficient for
32-bit tasks.

Based upon a report by Mariusz Kozlowski.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The IPv6 BEET output function is incorrectly including the inner
header in the payload to be protected.  This causes a crash as
the packet doesn't actually have that many bytes for a second
header.

The IPv4 BEET output on the other hand is broken when it comes
to handling an inner IPv6 header since it always assumes an
inner IPv4 header.

This patch fixes both by making sure that neither BEET output
function touches the inner header at all.  All access is now
done through the protocol-independent cb structure.  Two new
attributes are added to make this work, the IP header length
and the IPv4 option length.  They're filled in by the inner
mode's output function.

Thanks to Joakim Koskela for finding this problem.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>