Always make sure RIP/EIP is 0 in the registers stored on the top
of the stack of a kernel thread. This makes sure the unwinder code
won't try a fallback but knows the stack has ended.

AK: this patch is a bit mysterious. in theory they should be terminated
anyways, but it seems to fix at least one crash. Anyways double termination
probably doesn't hurt.
Signed-off-by: NAndi Kleen <ak@suse.de>

Got broken by a earlier change.

Also add a printk when no pci config method could be found.

Cc: gregkh@suse.de
Signed-off-by: NAndi Kleen <ak@suse.de>

Make the references to the bus number in hex instead of decimal, as
that is the way that lspci prints out the bus numbers.
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Also add copyright for work done after leaving IBM.
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

The purpose of the code being modified is to determine the location
of the calgary chip address space.  This is done by a magical formula
of FE0MB-8MB*OneBasedChassisNumber+1MB*(RioNodeId-ChassisBase) to
find the offset where BIOS puts it.  In this formula,
OneBasedChassisNumber corresponds to the NUMA node, and rionodeid is
always 2 or 3 depending on which chip in the system it is.  The
problem was that we had an off by one error that caused us to account
some busses to the wrong chip and thus give them the wrong address
space.

Fixes RH bugzilla #203971.
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-bu: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

calgary_init's for loop does not correspond to the actual device being
checked, which makes its upperbound check for array overflow useless.
Changing this to a do-while loop is the correct way of doing this.
There should be no possibility of spinning forever in this loop, as
pci_get_device states that it will go through all iterations, then
return NULL (thus breaking the loop).
Signed-off-by: NJon Mason <jdmason@kudzu.us>
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

Merge window closed..

There is a bug in the current version of the itmtouch USB touchscreen
driver.  The if statment that checks if pressure is being applied to the
touch screen is now missing a ! (not), so events are no longer being
reported correctly.

The original source code for this line was as follows:

	#define UCP(x) ((unsigned char*)(x))
	#define UCOM(x,y,z) ((UCP((x)->transfer_buffer)[y]) & (z))

	...
	if (!UCOM(urb, 7, 0x20)) {

And was cleaned to:

	unsigned char *data = urb->transfer_buffer;
	....
	 if (data[7] & 0x20) {

(note the lack of '!')

This has been tested on an LG L1510BF and an LG1510SF touch screen.
Signed-off-by: NMark Assad <massad@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/willy/parisc-2.6:
  [PA-RISC] Fix time.c for new do_timer() calling convention
  [PA-RISC] Fix must_check warnings in drivers.c
  [PA-RISC] Fix parisc_newuname()
  [PA-RISC] Remove warning from pci.c
  [PA-RISC] Fix filldir warnings
  [PA-RISC] Fix sys32_sysctl
  [PA-RISC] Fix sba_iommu compilation

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] cell: fix bugs found by sparse
  [POWERPC] spiderpic: enable new style devtree support
  [POWERPC] Update cell_defconfig
  [POWERPC] spufs: add infrastructure for finding elf objects
  [POWERPC] spufs: support new OF device tree format
  [POWERPC] spufs: add support for read/write on cntl
  [POWERPC] spufs: remove support for ancient firmware
  [POWERPC] spufs: make mailbox functions handle multiple elements
  [POWERPC] spufs: use correct pg_prot for mapping SPU local store
  [POWERPC] spufs: Add infrastructure needed for gang scheduling
  [POWERPC] spufs: implement error event delivery to user space
  [POWERPC] spufs: fix context switch during page fault
  [POWERPC] spufs: scheduler support for NUMA.
  [POWERPC] spufs: cell spu problem state mapping updates

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (54 commits)
  [SCSI] Initial Commit of qla4xxx
  [SCSI] raid class: handle component-add errors
  [SCSI] SCSI megaraid_sas: handle thrown errors
  [SCSI] SCSI aic94xx: handle sysfs errors
  [SCSI] SCSI st: fix error handling in module init, sysfs
  [SCSI] SCSI sd: fix module init/exit error handling
  [SCSI] SCSI osst: add error handling to module init, sysfs
  [SCSI] scsi: remove hosts.h
  [SCSI] scsi: Scsi_Cmnd convertion in aic7xxx_old.c
  [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog
  [SCSI] megaraid_sas: adds tasklet for cmd completion
  [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error
  [SCSI] megaraid_sas: function pointer for disable interrupt
  [SCSI] megaraid_sas: frame count optimization
  [SCSI] megaraid_sas: FW transition and q size changes
  [SCSI] qla2xxx: Update version number to 8.01.07-k2.
  [SCSI] qla2xxx: Stall mid-layer error handlers while rport is blocked.
  [SCSI] qla2xxx: Add MODULE_FIRMWARE tags.
  [SCSI] qla2xxx: Add support for host port state FC transport attribute.
  [SCSI] qla2xxx: Add support for fabric name FC transport attribute.
  ...

do_timer now wants to know how many ticks have elapsed.  Now that we
have to calculate that, we can eliminate some of the clever code that
avoided having to calculate that.  Also add some more documentation.
I'd like to thank Grant Grundler for helping me with this.
Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org>

Panic if we can't register the parisc bus or the root parisc device.
There's no way we can boot without them, so let the user know ASAP.

If we can't register a parisc device, handle the failure gracefully.
Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org>

The utsname virtualisation broke parisc_newuname compilation.
Rewrite the implementation to call sys_newuname() like sparc64 does.
Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org>

max() doesn't like comparing an unsigned long and a resource_size_t,
so make the local variables resource_size_t too.
Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org>

filldir_t now takes a u64, not an ino_t.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>

When CONFIG_SYSCTL_SYSCALL isn't defined, do_sysctl doesn't exist and
we fail to link.  Fix with an ifdef, the same way sparc64 did.
Also add some minor changes to be more like sparc64.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>

klist_iter_exit() only takes one parameter.
Also fix warning by adding additional brackets.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>

- Some long constants should be marked 'ul'.
- When using desc->handler_data to pass an __iomem
  register area, we need to add casts to and from
  __iomem.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This enables support for new firmware test releases.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This adds defaults for new configuration options added since
2.6.18 and it enables the option for 64kb pages by default.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This adds an 'object-id' file that the spe library can
use to store a pointer to its ELF object. This was
originally meant for use by oprofile, but is now
also used by the GNU debugger, if available.

In order for oprofile to find the location in an spu-elf
binary where an event counter triggered, we need a way
to identify the binary in the first place.

Unfortunately, that binary itself can be embedded in a
powerpc ELF binary. Since we can assume it is mapped into
the effective address space of the running process,
have that one write the pointer value into a new spufs
file.

When a context switch occurs, pass the user value to
the profiler so that can look at the mapped file (with
some care).
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The properties we used traditionally in the device tree are somewhat
nonstandard.  This adds support for a more conventional format using
'interrupts' and 'reg' properties.

The interrupts are specified in three cells (class 0, 1 and 2) and
registered at the interrupt-parent.

The reg property contains either three or four register areas in the
order 'local-store', 'problem', 'priv2', and 'priv1', so the priv1 one
can be left out in case of hypervisor driven systems that access these
through hcalls.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Writing to cntl can be used to stop execution on the
spu and to restart it, reading from cntl gives the
contents of the current status register.

The access is always in ascii, as for most other files.

This was always meant to be there, but we had a little
problem with writing to runctl so it was left out so
far.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Any firmware that still uses the 'spc' nodes already
stopped running for other reasons, so let's get rid of this.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Since libspe2 will provide a function that can read/write
multiple mailbox elements at once, the kernel should handle
that efficiently.

read/write on the three mailbox files can now access the
spe context multiple times to operate on any number of
mailbox data elements.

If the spu application keeps writing to its outbound
mailbox, the read call will pick up all the data in a
single system call.

Unfortunately, if the user passes an invalid pointer,
we may lose a mailbox element on read, since we can't
put it back. This probably impossible to solve, if the
user also accesses the mailbox through direct register
access.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This hopefully fixes a long-standing bug in the spu file system.
An spu context comes with local memory that can be either saved
in kernel pages or point directly to a physical SPE.

When mapping the physical SPE, that mapping needs to be cache-inhibited.
For simplicity, we used to map the kernel backing memory that way
too, but unfortunately that was not only inefficient, but also incorrect
because the same page could then be accessed simultaneously through
a cacheable and a cache-inhibited mapping, which is not allowed
by the powerpc specification and in our case caused data inconsistency
for which we did a really ugly workaround in user space.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add the concept of a gang to spufs as a new type of object.
So far, this has no impact whatsover on scheduling, but makes
it possible to add that later.

A new type of object in spufs is now a spu_gang. It is created
with the spu_create system call with the flags argument set
to SPU_CREATE_GANG (0x2). Inside of a spu_gang, it
is then possible to create spu_context objects, which until
now was only possible at the root of spufs.

There is a new member in struct spu_context pointing to
the spu_gang it belongs to, if any. The spu_gang maintains
a list of spu_context structures that are its children.
This information can then be used in the scheduler in the
future.

There is still a bug that needs to be resolved in this
basic infrastructure regarding the order in which objects
are removed. When the spu_gang file descriptor is closed
before the spu_context descriptors, we leak the dentry
and inode for the gang. Any ideas how to cleanly solve
this are appreciated.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This tries to fix spufs so we have an interface closer to what is
specified in the man page for events returned in the third argument of
spu_run.

Fortunately, libspe has never been using the returned contents of that
register, as they were the same as the return code of spu_run (duh!).

Unlike the specification that we never implemented correctly, we now
require a SPU_CREATE_EVENTS_ENABLED flag passed to spu_create, in
order to get the new behavior. When this flag is not passed, spu_run
will simply ignore the third argument now.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

For better explanation, I break down the page fault handling into steps:

1) There is a page fault caused by DMA operation initiated by SPU and
DMA is suspended.

2) The interrupt handler 'spu_irq_class_1()/__spu_trap_data_map()' is
called and it just wakes up the sleeping spe-manager thread.

3) by PPE scheduler, the corresponding bottom half,
spu_irq_class_1_bottom() is called in process context and DMA is
restarted.

There can be a quite large time gap between 2) and 3) and I found
the following problem:

Between 2) and 3) If the context becomes unbound, 3) is not executed
because when the spe-manager thread is awaken, the context is already
saved. (This situation can happen, for example, when a high priority spe
thread newly started in that time gap)

But the actual problem is that the corresponding SPU context does not
work even if it is bound again to a SPU.

Besides I can see the following warning in mambo simulator when the
context becomes
unbound(in save_mfc_cmd()), i.e. when unbind() is called for the
context after step 2) before 3) :

'WARNING: 61392752237: SPE2: MFC_CMD_QUEUE channel count of 15 is
inconsistent with number of available DMA queue entries of 16'

After I go through available documents, I found that the problem is
because the suspended DMA is not restarted when it is bound again.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch adds NUMA support to the the spufs scheduler.

The new arch/powerpc/platforms/cell/spufs/sched.c is greatly
simplified, in an attempt to reduce complexity while adding
support for NUMA scheduler domains.  SPUs are allocated starting
from the calling thread's node, moving to others as supported by
current->cpus_allowed.  Preemption is gone as it was buggy, but
should be re-enabled in another patch when stable.

The new arch/powerpc/platforms/cell/spu_base.c maintains idle
lists on a per-node basis, and allows caller to specify which
node(s) an SPU should be allocated from, while passing -1 tells
spu_alloc() that any node is allowed.

Since the patch removes the currently implemented preemptive
scheduling, it is technically a regression, but practically
all users have since migrated to this version, as it is
part of the IBM SDK and the yellowdog distribution, so there
is not much point holding it back while the new preemptive
scheduling patch gets delayed further.
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch adds a new "psmap" file to spufs that allows mmap of all of
the problem state mapping of SPEs. It is compatible with 64k pages. In
addition, it removes mmap ability of individual files when using 64k
pages, with the exception of signal1 and signal2 which will both map the
entire 64k page holding both registers. It also removes
CONFIG_SPUFS_MMAP as there is no point in not building mmap support in
spufs.

It goes along a separate patch to libspe implementing usage of that new
file to access problem state registers.

Another patch will follow up to fix races opened up by accessing
the 'runcntl' register directly, which is made possible with this
patch.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

open-iSCSI driver for Qlogic Corporation's iSCSI HBAs
Signed-off-by: NRavi Anand <ravi.anand@qlogic.com>
Signed-off-by: NDavid Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: NDoug Maxey <dwm@bubba.enoyolf.org>
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

- handle clear_user() error

- handle and properly unwind from sysfs errors thrown during mod init

- adjust order of calls in megasas_exit() to precisely match
  registration order in megasas_init()
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Updated for extra attribute and
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Handle and unwind from errors returned by driver model functions.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

- Notice and handle sysfs errors in module init, tape init

- Properly unwind errors in module init

- Remove bogus st_sysfs_class==NULL test, it is guaranteed !NULL at that point
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

- Properly handle and unwind errors in init_sd().  Fixes leaks on error,
  if class_register() or scsi_register_driver() failed.

- Ensure that exit_sd() execution order is the perfect inverse of
  initialization order.

FIXME:  If some-but-not-all register_blkdev() calls fail, we wind up
calling unregister_blkdev() for block devices we did not register.
This was a pre-existing bug.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>