Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

instead of reading the registers everytime

the current implementation respect the following constrain:
 - allow 1 to n soc to be enabled
 - allow to have a virtual cpu type and subtype
 - always detect the cpu type and subtype and report it
 - detect if the soc support is enabled
 - prepare for sysfs export support
 - drop soc specific code via compiler when the soc not enabled
   (via cpu_is_xxx)

Today if we read the exid we will have the same value for 9g35 and 9m11
and we will need to check the cidr too

with the new implementation we just need to check the soc subtype

this will also allow to have specific virtual subtype for rm9200 which the
board will have to specify via at91rm9200_set_type(int) as we have no way to
detect it.

this implementation is inspired by the SH cpu detection support
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

to make the soc base specified at runtime instead of compiled time
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

they are the same except the default priority
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

On all at91 except rm9200 and x40 have the System Controller starts
at address 0xffffc000 and has a size of 16KiB.

On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting
at 0xfffff000

This patch removes the individual definitions of AT91_BASE_SYS and
replaces them with a common version at base 0xfffffc000 and size 16KiB
and map the same memory space
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

Video input mux settings for tvp7002 and imager inputs were swapped.
Comment was correct.

Tested on EVM with tvp7002 input.
Signed-off-by: NJon Povey <jon.povey@racelogic.co.uk>
Acked-by: NManjunath Hadli <manjunath.hadli@ti.com>
Cc: stable@kernel.org
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

Avoid NULL dereference of irq_alloc_generic_chip return in low
memory conditions.
Signed-off-by: NTodd Poynor <toddpoynor@google.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

Function declaration differs between file: dma.c and file:dma.h
and SPARSE (Documentation/sparse.txt) gives error messages

All dma channels are members of 'enum dma_ch' and not 'unsigned int'
Please have a look at channel definitions in:
arch/arm/mach-s3c64xx/include/mach/dma.h
arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h
arch/arm/mach-s3c2410/include/mach/dma.h
So all arguments should be of type 'enum dma_ch'
Signed-off-by: NSangwook Lee <sangwook.lee@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Signed-off-by: NTodd Poynor <toddpoynor@google.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Commit 234b6ced

   clocksource: convert ARM 32-bit up counting clocksources

broke the build for ixp4xx and made big endian operation impossible.
This commit restores the original behaviour.
Signed-off-by: NRichard Cochran <richard.cochran@omicron.at>
Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>
[ Thomas says that we might want to have generic BE accessor functions
  to the MMIO clock source, but that hasn't happened yet, so in the
  meantime this seems to be the short-term fix for the particular
  problem - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 74164016 ("arm: davinci: Fix fallout from generic irq chip
conversion") introduced a bug, causing low level interrupt handlers to
get a bogus irq number as an argument. The gpio irq handler falsely
assumes that the handler data is the irq base number and that is no
longer true.

Set the irq handler data to be a pointer to the corresponding gpio
controller. The chained irq handler can then use it to extract both the
irq base number and the gpio registers structure.
Signed-off-by: NIdo Yariv <ido@wizery.com>
CC: Thomas Gleixner <tglx@linutronix.de>
[nsekhar@ti.com: renamed "ctl" to "d", simplified indexing logic for chips and
took care of odd bank handling in irq handler]
Signed-off-by: NSekhar Nori <nsekhar@ti.com>

In commit f0fba2ad (ASoC: multi-component - ASoC Multi-Component
Support), the name of the ak4104 codec driver was changed without
amending the platform code which uses it as well.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

The display requires some milliseconds between GPIO_TFT_VA_EN
and GPIO_DISPLAY_ENABLE. Reorder initialisation to comply with
the display spec.

Also tune timings for better compliance with the spec.
Signed-off-by: NSven Neumann <s.neumann@raumfeld.com>
Acked-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

The backlight control is going to change back to PWM in the
upcoming Raumfeld Controller hardware revision.
Signed-off-by: NSven Neumann <s.neumann@raumfeld.com>
Acked-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

The PXA platform code has a static inline helper called
gpio_to_chip which clashes with the gpiolib namespace if we
try to expose the function with the same name from gpiolib,
and it's still confusing even if we don't do that. So rename
it to gpio_to_pxachip().
Reported-by: NH Hartley Sweeten <hartleys@visionengravers.com>
Cc: Eric Miao <eric.miao@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

If mini2440_init() is in __init, mini2440_parse_features() should also
be in __init. Fixes:

(.text+0x9adc): Section mismatch in reference from the function mini2440_parse_features.clone.0() to the
(unknown reference) .init.data:(unknown)
The function mini2440_parse_features.clone.0() references the (unknown reference) __initdata (unknown).
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Michel Pollet <buserror@gmail.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Commit bb072c3c (ARM / Samsung: Use struct syscore_ops for "core" power
management) turned s3c2410_dma_resume_chan() from int to void. So, drop
the actual return values, too. Fixes:

arch/arm/plat-s3c24xx/dma.c: In function 's3c2410_dma_resume_chan':
arch/arm/plat-s3c24xx/dma.c:1238:3: warning: 'return' with a value, in function returning void
arch/arm/plat-s3c24xx/dma.c:1250:2: warning: 'return' with a value, in function returning void
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Commit 8970ef47 (S3C24XX: Remove hardware specific registers from DMA
calls) removed the parameter dcon in s3c2410_dma_config() and calculates
it on its own. So the debug-output for the old parameter can go, too.
Fixes:

arch/arm/plat-s3c24xx/dma.c: In function 's3c2410_dma_config':
arch/arm/plat-s3c24xx/dma.c:1030:2: warning: 'dcon' is used uninitialized in this function
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This fixes a regression introduced by e59347a1 "arm: orion:
Use generic irq chip".

Depending on the device, interrupts acknowledgement is done by setting
or by clearing a dedicated register. Replace irq_gc_ack() with some
{set,clr}_bit variants allows to handle both cases.

Note that this patch affects the following SoCs: Davinci, Samsung and
Orion. Except for this last, the change is minor: irq_gc_ack() is just
renamed into irq_gc_ack_set_bit().

For the Orion SoCs, the edge GPIO interrupts support is currently
broken. irq_gc_ack() try to acknowledge a such interrupt by setting
the corresponding cause register bit. The Orion GPIO device expect the
opposite. To fix this issue, the irq_gc_ack_clr_bit() variant is used.

Tested on Network Space v2.
Reported-by: NJoey Oravec <joravec@drewtech.com>
Signed-off-by: NSimon Guinot <sguinot@lacie.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

This platform has not been converted to 'struct irq_data' when the big
pile was done. It fails to compile nowadays, because the compatibility
code has gone.

  CC      arch/arm/mach-vt8500/irq.o
arch/arm/mach-vt8500/irq.c:118:2: error: unknown field 'ack' specified in initializer
arch/arm/mach-vt8500/irq.c:118:2: warning: initialization from incompatible pointer type
arch/arm/mach-vt8500/irq.c:119:2: error: unknown field 'mask' specified in initializer
arch/arm/mach-vt8500/irq.c:119:2: warning: initialization from incompatible pointer type
arch/arm/mach-vt8500/irq.c:120:2: error: unknown field 'unmask' specified in initializer
arch/arm/mach-vt8500/irq.c:120:2: warning: initialization from incompatible pointer type
arch/arm/mach-vt8500/irq.c:121:2: error: unknown field 'set_type' specified in initializer
arch/arm/mach-vt8500/irq.c:121:2: warning: initialization from incompatible pointer type
make[1]: *** [arch/arm/mach-vt8500/irq.o] Error 1

Add the missing conversion. Tested on a JayPC-Tablet.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NAlexey Charkov <alchark@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

To get hundredths of MHz the rate needs to be divided by 10'000.
Here is an example:
 twd_timer_rate = 123456789
 Before the patch:
    twd_timer_rate / 1000000 = 123
    (twd_timer_rate / 1000000) % 100 = 23
    Result: 123.23MHz.
 After being fixed:
    twd_timer_rate / 1000000 = 123
    (twd_timer_rate / 10000) % 100 = 45
    Result: 123.45MHz.
Signed-off-by: NVitaly Kuzmichev <vkuzmichev@mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The l2x0_disable function attempts to writel with the l2x0_lock held.
This results in deadlock when the writel contains an outer_sync call
for the platform since the l2x0_lock is already held by the disable
function. A further problem is that disabling the L2 without flushing it
first can lead to the spin_lock operation becoming visible after the
spin_unlock, causing any subsequent L2 maintenance to deadlock.

This patch replaces the writel with a call to writel_relaxed in the
disabling code and adds a flush before disabling in the control
register, preventing livelock from occurring.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

It was discovered by Roberto Bergo, that RTS/DTR signals are inverted after
the boot, because it was causing him problems with hardware controlled modem
connected on ttyAM0. Todd Valentic came with this patch for the issue.

Discussion: http://tech.groups.yahoo.com/group/ts-7000/message/20259

Comments from Petr Štetiar:

 Sorry, but forget to add Acked-by[1]:

 1. https://patchwork.kernel.org/patch/873052/

Cc: Ryan Mallon <ryan@bluewatersys.com>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NTodd Valentic <todd.valentic@sri.com>
Tested-by: NRoberto Bergo <roberto.bergo@robson.it>
Signed-off-by: NPetr Štetiar <ynezz@true.cz>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This platform has not been converted to 'struct irq_data' when the big
pile was done and fails to compile nowadays. Tested on a JayPC-Tablet.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NAlexey Charkov <alchark@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The original pair of <0x01db, 208000000> is invalid. Correct it to
the valid value.

The 6th bit of the NFC APMU register indicates NFC works whether
at 156Mhz or 78Mhz. So 0x19b indicates NFC works at 156Mhz, and
0x1db indicates it works at 78Mhz.
Signed-off-by: NLei Wen <leiwen@marvell.com>
Cc: stable@kernel.org
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

The original pair of <0x01db, 208000000> is invalid.
Correct to the valid value.
Signed-off-by: NLei Wen <leiwen@marvell.com>
Cc: stable@kernel.org
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

The file mfp-pxa2xx.c defines a macro, PGSR(), which translates a gpio
bank number to a PGSR register address. The function pxa2xx_mfp_suspend()
erroneously passed in a gpio number instead of a gpio bank number.
Signed-off-by: NPaul Parsons <lost.distance@yahoo.com>
Cc: stable@kernel.org
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Set up a correct I2C bus controller variant name for Exynos4.
Without this change the I2C bus driver fails to acquire its
clocks.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

S5PC100 Compilation fails without this patch
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

tx_st_done is required for checking the transmission status of SPI
channels with different fifo levels
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The section mismatch in headsmp.S made hotplug stop working after the
first instance of suspend-to-RAM and its wakeup.
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch fixes following.

<6>[    0.000000] sched_clock: 32 bits at 33MHz, ...
<6>[  128.651309] Calibrating delay loop...

There is a big jump. The reason is that PWM Timer which
is for HRTimer was used before its initialization.

So this patch changes its order and following is kernel
boot log message after this.

<6>[    0.000000] sched_clock: 32 bits at 33MHz, ...
<6>[    0.000088] Calibrating delay loop...
Signed-off-by: NSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

There has been no #ifndef - #define - #endif protection for this
header file.
Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

These pins are incorrectly configured for PCM2
configure them to SPDIF(_OUT & _EXT_CLK)
Signed-off-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com>
Acked-by: NJassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

On SMDKV310 board, a card detect gpio pin is available that is directly
connected to the io pad of the sdhci controller. Fix incorrect value
of cd_type field in platform data for sdhci instance 0 and 2.
Signed-off-by: NThomas Abraham <thomas.ab@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Ensure that the meminfo array is sanity checked before we pass the
memory to memblock.  This helps to ensure that memblock and meminfo
agree on the dimensions of memory, especially when more memory is
passed than the kernel can deal with.
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

armpmu_enable can be called in situations where no events are present
(for example, from the event rotation tick after a profiled task has
exited). In this case, we currently start the PMU anyway which may
leave it active inevitably without any events being monitored.

This patch adds a simple check to the enabling code so that we avoid
starting the PMU when no events are present.

Cc: <stable@kernel.org>
Reported-by: NAshwin Chaugle <ashwinc@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The recently modified nand buswitth configuration is not aligned with
board reality: the double footprint on boards is always populated with 8bits
buswidth nand flashes.
So we have to consider that without particular configuration the 8bits
buswidth is selected by default.
Moreover, the previous logic was always using !board_have_nand_8bit(), we
change it to a simpler: board_have_nand_16bit().
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Pointers to statically declared platform device structures which are
registered with platform_device_register() are then used during run time
to access these structure members, for example from platform_uevent()
and much more. Therefore, these structures should never be placed inside
sections which are dropped after boot. Fix platform devices incorrectly
tagged with __initdata which happen to exist inside OMAP sub-trees.

This bug has exhibited itself on my ARM/OMAP1 based Amstrad Delta
videophone after commit 6d3163ce, "mm:
check if any page in a pageblock is reserved before marking it
MIGRATE_RESERVE", resulting in reading from several
/sys/device/platform/*/uevent files always ending up with segmentation
faults.
Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: NFelipe Balbi <balbi@ti.com>
Cc: Varadarajan, Charulatha <charu@ti.com>
Cc: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>