Move the code to arch/x86/platform/mrst/. Also fix a typo to use
the correct config option: ONFIG_EARLY_PRINTK_MRST
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: alan@linux.intel.com
LKML-Reference: <1291348298-21263-1-git-send-email-feng.tang@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Commit a5ef2e70 "x86: Sanitize apb timer interrupt handling" forgot
the affinity setup when cleaning up the code, this patch just
adds the forgotten part
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Cc: Jacob Pan <jacob.jun.pan@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
LKML-Reference: <1291348298-21263-2-git-send-email-feng.tang@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch enables the UART on the CE4100. The UART has a couple of
issues that need to be worked around. First the UART is mostly PC
compatible except that it is clocked eight times faster than a
standard PC so the default configuration provided in
arch/x86/include/asm/serial.h needs to be overridden. Second the TX
interrupt may not be set correctly all the time. Lastly accessing the
UART via I/O space for early_prink() hangs the chip when the IOAPIC is
enabled.

A custom mem_serial_in() is provided to work around the TX interrupt
issue. The configuration issues are dealt with in the call back
registered with the 8250 driver via serial8250_set_isa_configurator()
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
LKML-Reference: <1290436128-17958-1-git-send-email-dirk.brandewie@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Sodaville needs to setup the IO_APIC ids as the boot loader leaves
them uninitialized. Split out the setter function so it can be called
unconditionally from the sodaville board code.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20101126165020.GA26361@www.tglx.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

platform_device_register() may fail, if so propagate the return
code from mrst_device_create().
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
LKML-Reference: <1290104207-31279-1-git-send-email-segoon@openwall.com>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Adaptions to the changes of the AMD northbridge caching code: instead
of a bool in each l3 struct, use a flag in amd_northbridges.flags to
indicate L3 cache index disable support; use a pointer to the whole
northbridge instead of the misc device in the l3 struct; simplify the
initialisation; dynamically generate sysfs attribute array.
Signed-off-by: NHans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Support more than just the "Misc Control" part of the northbridges.
Support more flags by turning "gart_supported" into a single bit flag
that is stored in a flags member. Clean up related code by using a set
of functions (amd_nb_num(), amd_nb_has_feature() and node_to_amd_nb())
instead of accessing the NB data structures directly. Reorder the
initialization code and put the GART flush words caching in a separate
function.
Signed-off-by: NHans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Not only the naming of the files was confusing, it was even more so for
the function and variable names.

Renamed the K8 NB and NUMA stuff that is also used on other AMD
platforms. This also renames the CONFIG_K8_NUMA option to
CONFIG_AMD_NUMA and the related file k8topology_64.c to
amdtopology_64.c. No functional changes intended.
Signed-off-by: NHans Rosenfeld <hans.rosenfeld@amd.com>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

The Iris machines from Eurobraille do not have APM or ACPI support
to shut themselves down properly.  A special I/O sequence is
needed to do so.  This modle runs this I/O sequence at
kernel shutdown when its force parameter is set to 1.
Signed-off-by: NShérab <Sebastien.Hinderer@ens-lyon.org>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
[ did minor coding style edits ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

commit b9fc71f4 (x86, mrst: The shutdown for MRST requires the SCU
IPC mechanism) introduced the following warning:

 warning: (X86_MRST && PCI && PCI_GOANY && X86_32 &&
 X86_EXTENDED_PLATFORM && X86_IO_APIC) selects INTEL_SCU_IPC which has
 unmet direct dependencies (X86 && X86_PLATFORM_DEVICES && X86_MRST)

which is due to the hierarchical menu structure.

Select X86_PLATFORM_DEVICES as well.

Originally-from: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
LKML-Reference: <20101115101406.77e072ef.randy.dunlap@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>

Fix the build failure reported by Randy.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
LKML-Reference: <20101115173110.6877.83958.stgit@localhost.localdomain>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds the CE4100 reboot fixup to reboot_fixups_32.c

[ tglx: Moved PCI id to reboot_fixups_32.c ]
Signed-off-by: NDirk Brandewie <dirk.j.brandewie@intel.com>
LKML-Reference: <5bdcfb4f0206fa721570504e95659a03b815bc5e.1289331834.git.dirk.brandewie@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch provides access methods for PCI registers that mis-behave on
the CE4100. Each register can be assigned a private init, read and
write routine. The exception to this is the bridge device. The
bridge device is the only device on bus zero (0) that requires any
fixup so it is a special case.

[ tglx: minor coding style cleanups, __init annotation and
  	simplification of ce4100_conf_read/write ]
Signed-off-by: NDirk Brandewie <dirk.j.brandewie@intel.com>
LKML-Reference: <40b6751381c2275dc359db5a17989cce22ad8db7.1289331834.git.dirk.brandewie@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Add CE4100 platform support. CE4100 needs early setup like
moorestown.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NDirk Brandewie <dirk.brandewie@gmail.com>
LKML-Reference: <94720fd7f5564a12ebf202cf2c4f4c0d619aab35.1289331834.git.dirk.brandewie@gmail.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Some BIOSes provide PCI host bridge windows that overlap, e.g.,

    pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xffffffff]
    pci_root PNP0A03:00: host bridge window [mem 0xafffffff-0xdfffffff]
    pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xffffffff]

If we simply insert these as children of iomem_resource, the second window
fails because it conflicts with the first, and the third is inserted as a
child of the first, i.e.,

    b0000000-ffffffff PCI Bus 0000:00
      f0000000-ffffffff PCI Bus 0000:00

When we claim PCI device resources, this can cause collisions like this
if we put them in the first window:

    pci 0000:00:01.0: address space collision: [mem 0xff300000-0xff4fffff] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xffffffff]

Host bridge windows are top-level resources by definition, so it doesn't
make sense to make the third window a child of the first.  This patch
coalesces any host bridge windows that overlap.  For the example above,
the result is this single window:

    pci_root PNP0A03:00: host bridge window [mem 0xafffffff-0xffffffff]

This fixes a 2.6.34 regression.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=17011Reported-and-tested-by: NAnisse Astier <anisse@astier.eu>
Reported-and-tested-by: NPramod Dematagoda <pmd.lotr.gandalf@gmail.com>
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

When setting up the mpc_intsrc structure for vRTC's IRQ,
we need to set its irqflag to level trigger, otherwise
it will be taken as edge triggered and the vRTC IRQ will
fire only once, as there is never a EOI issued from the
IA core for it.

The original code worked in previous kernel. This is  because it
was configured to level trigger type by luck. It fell
into the default PCI trigger category which is level triggered.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
LKML-Reference: <20101111155019.12924.569.stgit@localhost.localdomain>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

This patch adds the sound card bindings for Moorestown (pmic_audio) and
the Medfield platform (msic_audio) as IPC devices. This ensures they will be
created at the right time.
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
LKML-Reference: <20101110174044.11340.78008.stgit@localhost.localdomain>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Provide the standard kernel rtc driver interface on top of the vrtc layer
added in the previous patch.
Signed-off-by: NFeng Tang <feng.tang@intel.com>
LKML-Reference: <20101110172911.3311.20593.stgit@localhost.localdomain>
[Fixed swapped arguments on IPC]
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
[Cleaned up and the device creation moved to arch/x86/platform]
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Moorestown platform doesn't have a m146818 RTC device like traditional
x86 PC, but a firmware emulated virtual RTC device(vrtc), which provides
some basic RTC functions like get/set time. vrtc serves as the only
wall clock device on Moorestown platform.

[ tglx: Changed the exports to _GPL ]
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
LKML-Reference: <20101110172837.3311.40483.stgit@localhost.localdomain>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Moorestowns needs to use a special IPC command to reboot or shutdown the
platform.
Signed-off-by: NAlek Du <alek.du@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
LKML-Reference: <20101110164928.6365.94243.stgit@localhost.localdomain>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

We already deliberately setup a 1-1 P2M for the region up to 1M in
order to allow code which assumes this region is already mapped to
work without having to convert everything to ioremap.

Domain 0 should not return any apparently unused memory regions
(reserved or otherwise) in this region to Xen since the e820 may not
accurately reflect what the BIOS has stashed in this region.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>

Jasper suggested we use the zeroing capability of the allocators
instead of calling memset ourselves. Add node affinity while we're at
it.
Reported-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Commit 92580d64e16402762e2acc3022f065397c780425
("x86: pvclock: Move scale_delta into common header")
forgot to remove scale_delta.
Signed-off-by: NKusanagi Kouichi <slash@ac.auone-net.jp>
Cc: Zachary Amsden <zamsden@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Glauber Costa <glommer@redhat.com>
LKML-Reference: <20101105110444.BAF6D6FC03B@msa105.auone-net.jp>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Remove the second <asm/atomic.h> inclusion.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
LKML-Reference: <alpine.LNX.2.00.1011072253360.26247@swampdragon.chaosbits.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

check_enable_amd_mmconf_dmi() gets called only for the BSP,
hence everything hanging off of it can be __init*.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Acked-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CD2DE1E0200007800020990@vpn.id2.novell.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

A new version of the SGI UV hub node controller is being
developed. A few of the MMRs (control registers) that exist on
the current hub no longer exist on the new hub. Fortunately,
there are alternate MMRs that are are functionally equivalent
and that exist on both hubs.

This patch changes the UV code to use MMRs that exist in BOTH
versions of the hub node controller.
Signed-off-by: NJack Steiner <steiner@sgi.com>
LKML-Reference: <20101106204056.GA27584@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The [vk][cmz]alloc(_node) family of functions return void
pointers which it's completely unnecessary/pointless to cast to
other pointer types since that happens implicitly.

This patch removes such casts from arch/x86.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Cc: trivial@kernel.org
Cc: amd64-microcode@amd64.org
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <alpine.LNX.2.00.1011082310220.23697@swampdragon.chaosbits.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

native_apic_msr_read() and x2apic_enabled() use rdmsr(msr, low, high),
but only use the low part.

gcc4.6 complains about this:
.../apic.h:144:11: warning: variable 'high' set but not used [-Wunused-but-set-variable]

rdmsr() is just a wrapper around rdmsrl() which splits the 64bit value
into low and high, so using rdmsrl() directly solves this.

[tglx: Changed the variables to u64 as suggested by Cyrill. It's less
       confusing and has no code impact as this is 64bit only anyway.
       Massaged changelog as well. ]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: x86@kernel.org
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
LKML-Reference: <1289251229-19589-1-git-send-email-andi@firstfloor.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Penwell has APB timer based watchdog timers, it requires platform code to parse
SFI MTMR tables in order to claim its timer.

This patch will always parse SFI MTMR regardless of system timer configuration
choices. Otherwise, SFI MTMR table may not get parsed if running on Medfield
with always-on local APIC timers and constant TSC. Watchdog timer driver will
then not get a timer to use.
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
LKML-Reference: <20101109112800.20591.10802.stgit@localhost.localdomain>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

SFI provides a series of tables. These describe the platform devices present
including SPI and I²C devices, as well as various sensors, keypads and other
glue as well as interfaces provided via the SCU IPC mechanism (intel_scu_ipc.c)

This patch is a merge of the core elements and relevant fixes from the
Intel development code by Feng, Alek, myself into a single coherent patch
for upstream submission.

It provides the needed infrastructure to register I2C, SPI and platform devices
described by the tables, as well as handlers for some of the hardware already
supported in kernel. The 0.8 firmware also provides GPIO tables.

Devices are created at boot time or if they are SCU dependant at the point an
SCU is discovered. The existing Linux device mechanisms will then handle the
device binding. At an abstract level this is an SFI to Linux device translator.

Device/platform specific setup/glue is in this file. This is done so that the
drivers for the generic I²C and SPI bus devices remain cross platform as they
should.

(Updated from RFC version to correct the emc1403 name used by the firmware
 and a wrongly used #define)
Signed-off-by: NAlek Du <alek.du@linux.intel.com>
LKML-Reference: <20101109112158.20013.6158.stgit@localhost.localdomain>
[Clean ups, removal of 0.7 support]
Signed-off-by: NFeng Tang <feng.tang@linux.intel.com>
[Clean ups]
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Stanse found that xen_setup_msi_irqs leaks memory when
xen_allocate_pirq fails. Free the memory in that fail path.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xensource.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org

smp_call_function_many is specified to be called only with preemption
disabled. Fulfill this requirement.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Structures kvm_vcpu_events, kvm_debugregs, kvm_pit_state2 and
kvm_clock_data are copied to userland with some padding and reserved
fields unitialized.  It leads to leaking of contents of kernel stack
memory.  We have to initialize them to zero.

In patch v1 Jan Kiszka suggested to fill reserved fields with zeros
instead of memset'ting the whole struct.  It makes sense as these
fields are explicitly marked as padding.  No more fields need zeroing.

KVM-Stable-Tag.
Signed-off-by: NVasiliy Kulikov <segooon@gmail.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

drop_spte should not attempt to rmap_remove a non present shadow pte.

This fixes a BUG_ON seen on kvm-autotest.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Reported-by: NLucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

I have observed the following bug trigger:

1. userspace calls GET_DIRTY_LOG
2. kvm_mmu_slot_remove_write_access is called and makes a page ro
3. page fault happens and makes the page writeable
   fault is logged in the bitmap appropriately
4. kvm_vm_ioctl_get_dirty_log swaps slot pointers

a lot of time passes

5. guest writes into the page
6. userspace calls GET_DIRTY_LOG

At point (5), bitmap is clean and page is writeable,
thus, guest modification of memory is not logged
and GET_DIRTY_LOG returns an empty bitmap.

The rule is that all pages are either dirty in the current bitmap,
or write-protected, which is violated here.

It seems that just moving kvm_mmu_slot_remove_write_access down
to after the slot pointer swap should fix this bug.

KVM-Stable-Tag.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Mark tlb_cpuhp_notify as __cpuinit. It's basically a callback
function, which is called from __cpuinit init_smp_flash(). So -
it's safe.

We were warned by the following warning:

 WARNING: arch/x86/mm/built-in.o(.text+0x356d): Section mismatch
 in reference from the function tlb_cpuhp_notify() to the
 function .cpuinit.text:calculate_tlb_offset()
 The function tlb_cpuhp_notify() references
 the function __cpuinit calculate_tlb_offset().
 This is often because tlb_cpuhp_notify lacks a __cpuinit
 annotation or the annotation of calculate_tlb_offset is wrong.
Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <AANLkTinWQRG=HA9uB3ad0KAqRRTinL6L_4iKgF84coph@mail.gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Russ Anderson reported:
| There is a regression that is causing a NULL pointer dereference
| in free_irte when shutting down xpc. git bisect narrowed it down
| to git commit d585d060(intr_remap: Simplify the code further), which
| changed free_irte(). Reverse applying the patch fixes the problem.

We need to use irq_remapped() for each irq instead of checking only
intr_remapping_enabled as there might be non remapped irqs even when
remapping is enabled.

[ tglx: use cfg instead of retrieving it again. Massaged changelog ]
Reported-bisected-and-tested-by: NRuss Anderson <rja@sgi.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <4CCBD511.40607@kernel.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Currently, text_poke_smp() passes a NULL as the third argument to
__stop_machine(), which will only run stop_machine_text_poke()
on 1 cpu. Change NULL -> cpu_online_mask, as stop_machine_text_poke()
is intended to be run on all cpus.

I actually didn't notice any problems with stop_machine_text_poke()
only being called on 1 cpu, but found this via code inspection.
Signed-off-by: NJason Baron <jbaron@redhat.com>
LKML-Reference: <20101028152026.GB2875@redhat.com>
Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

sizeof(pmd_t *) is 4 bytes on 32-bit PAE leading to an allocation of
only 2048 bytes. The correct size is sizeof(pmd_t) giving us a full
page allocation.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>