- 17 7月, 2012 1 次提交
-
-
由 Andrey Vagin 提交于
Before this patch sock_diag works for init_net only and dumps information about sockets from all namespaces. This patch expands sock_diag for all name-spaces. It creates a netlink kernel socket for each netns and filters data during dumping. v2: filter accoding with netns in all places remove an unused variable. Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Pavel Emelyanov <xemul@parallels.com> CC: Eric Dumazet <eric.dumazet@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: NAndrew Vagin <avagin@openvz.org> Acked-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 6月, 2012 1 次提交
-
-
由 Thomas Graf 提交于
Also, no need to trim on nlmsg_put() failure, nothing has been added yet. We also want to use nlmsg_end(), nlmsg_new() and nlmsg_free(). Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 6月, 2012 1 次提交
-
-
由 David S. Miller 提交于
And use nlmsg_data() while we're here too, and remove useless casts. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2012 2 次提交
-
-
由 Shan Wei 提交于
read only, so change it to const. Signed-off-by: NShan Wei <davidshan@tencent.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shan Wei 提交于
When we use netlink to monitor queue information for udp socket, idiag_rqueue and idiag_wqueue of inet_diag_msg are returned with 0. Keep consistent with netstat, just return back allocated rmem/wmem size. Signed-off-by: NShan Wei <davidshan@tencent.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 2月, 2012 1 次提交
-
-
由 Pablo Neira Ayuso 提交于
Davem considers that the argument list of this interface is getting out of control. This patch tries to address this issue following his proposal: struct netlink_dump_control c = { .dump = dump, .done = done, ... }; netlink_dump_start(..., &c); Suggested by David S. Miller. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 1月, 2012 2 次提交
-
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 12月, 2011 1 次提交
-
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 12月, 2011 2 次提交
-
-
由 Pavel Emelyanov 提交于
The sk address is used as a cookie between dump/get_exact calls. It will be required for unix socket sdumping, so move it from inet_diag to sock_diag. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
I've made a mistake when fixing the sock_/inet_diag aliases :( 1. The sock_diag layer should request the family-based alias, not just the IPPROTO_IP one; 2. The inet_diag layer should request for AF_INET+protocol alias, not just the protocol one. Thus fix this. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 12月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Instead of testing defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 12月, 2011 8 次提交
-
-
由 Pavel Emelyanov 提交于
Introduce two callbacks in inet_diag_handler -- one for dumping all sockets (with filters) and the other one for dumping a single sk. Replace direct calls to icsk handlers with indirect calls to callbacks provided by handlers. Make existing TCP and DCCP handlers use provided helpers for icsk-s. The UDP diag module will provide its own. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The existing inet_csk_diag_fill dumps the inet connection sock info into the netlink inet_diag_message. Prepare this routine to be able to dump only the inet_sock part of a socket if the icsk part is missing. This will be used by UDP diag module when dumping UDP sockets. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The upcoming UDP module will require exactly this ability, so just move the existing code to provide one. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Similar to previous patch: the 1st part locks the inet handler and will get generalized and the 2nd one dumps icsk-s and will be used by TCP and DCCP handlers. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The 1st part locks the inet handler and the 2nd one dump the inet connection sock. In the next patches the 1st part will be generalized to call the socket dumping routine indirectly (i.e. TCP/UDP/DCCP) and the 2nd part will be used by TCP and DCCP handlers. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The netlink diag susbsys stores sk address bits in the nl message as a "cookie" and uses one when dumps details about particular socket. The same will be required for udp diag module, so introduce a heler in inet_diag module Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
There's an info_size value stored on inet_diag_handler, but for existing code this value is effectively constant, so just use sizeof(struct tcp_info) where required. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 12月, 2011 11 次提交
-
-
由 Pavel Emelyanov 提交于
This patch moves the sock_ code from inet_diag.c to generic sock_diag.c file and provides necessary request_module-s calls and a pointer on inet_diag_compat dumping routine. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Now all the code works with sock_diag_req-compatible structs, so it's possible to stop using the inet_diag_type2proto in inet_csk_diag_fill. Pass the inet_diag_req into it and use the sdiag_protocol field. At the same time remove the explicit ext argument, since it's also on the req. However, this conversion is still required in _compat code, so just move this routine, not remove. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The new API will specify family to work with. Teach the existing socket walking code to bypass not interesting ones. To preserve compatibility with existing behavior the _compat code sets interesting family to AF_UNSPEC to dump them all. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Make inet_diag_dumo work with given header instead of calculating one from the nl message. The SOCK_DIAG_BY_FAMILY just passes skb's one through, the compat code converts the old header to new one. Also fix the bytecode calculation to find one at proper offset. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Make inet_diag_get_exact work with given header instead of calculating one from the nl message. The SOCK_DIAG_BY_FAMILY just passes skb's one through, the compat code converts the old header to new one. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This one coinsides with the sock_diag_req in the beginning and contains only used fields from its previous analogue. The existing code is patched to use the _compat version of it for now. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
When receiving the SOCK_DIAG_BY_FAMILY message we have to find the handler for provided family and pass the nl message to it. This patch describes an infrastructure to work with such nandlers and implements stubs for AF_INET(6) ones. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Sorry, but the vger didn't let this message go to the list. Re-sending it with less spam-filter-prone subject. When dumping the AF_INET/AF_INET6 sockets user will also specify the protocol, so prepare the protocol diag handlers to work with IPPROTO_ constants. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Current code calculates it at fixed offset. This offset will change, so move the BC calculation upper to make the further patching simpler. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This type will run the family+protocol based socket dumping. Also prepare the stub function for it. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The ultimate goal is to get the sock_diag module, that works in family+protocol terms. Currently this is suitable to do on the inet_diag basis, so rename parts of the code. It will be moved to sock_diag.c later. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 11月, 2011 2 次提交
-
-
由 Alexey Dobriyan 提交于
C assignment can handle struct in6_addr copying. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
Signed-off-by: NMaciej Żenczykowski <maze@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 11月, 2011 1 次提交
-
-
由 Maciej Żenczykowski 提交于
commit 3ceca749 added a TOS attribute. Unfortunately TOS and TCLASS are both present in a dual-stack v6 socket, furthermore they can have different values. As such one cannot in a sane way expose both through a single attribute. Signed-off-by: NMaciej Żenczyowski <maze@google.com> CC: Murali Raja <muralira@google.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2011 1 次提交
-
-
由 Murali Raja 提交于
This patch exposes the tos value for the TCP sockets when the TOS flag is requested in the ext_flags for the inet_diag request. This would mainly be used to expose TOS values for both for TCP and UDP sockets. Currently it is supported for TCP. When netlink support for UDP would be added the support to expose the TOS values would alse be done. For IPV4 tos value is exposed and for IPV6 tclass value is exposed. Signed-off-by: NMurali Raja <muralira@google.com> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 6月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
A malicious user or buggy application can inject code and trigger an infinite loop in inet_diag_bc_audit() Also make sure each instruction is aligned on 4 bytes boundary, to avoid unaligned accesses. Reported-by: NDan Rosenberg <drosenberg@vsecurity.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 6月, 2011 1 次提交
-
-
由 Greg Rose 提交于
The message size allocated for rtnl ifinfo dumps was limited to a single page. This is not enough for additional interface info available with devices that support SR-IOV and caused a bug in which VF info would not be displayed if more than approximately 40 VFs were created per interface. Implement a new function pointer for the rtnl_register service that will calculate the amount of data required for the ifinfo dump and allocate enough data to satisfy the request. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 23 4月, 2011 1 次提交
-
-
由 Eric Dumazet 提交于
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 1月, 2011 1 次提交
-
-
由 David S. Miller 提交于
This reverts commit 0ab03c2b. It breaks several things including the avahi daemon. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 1月, 2011 1 次提交
-
-
由 Jan Engelhardt 提交于
Due to NLM_F_DUMP is composed of two bits, NLM_F_ROOT | NLM_F_MATCH, when doing "if (x & NLM_F_DUMP)", it tests for _either_ of the bits being set. Because NLM_F_MATCH's value overlaps with NLM_F_EXCL, non-dump requests with NLM_F_EXCL set are mistaken as dump requests. Substitute the condition to test for _all_ bits being set. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Acked-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-